| Age | Commit message (Collapse) | Author |
|
The Samsung ATNA40CT06 panel is a 16" AMOLED eDP panel. It is similar to
the ATNA33XC20 except that it is larger and has a different resolution.
It is found on Qualcomm Glymur CRD platform.
Raw panel edid:
00 ff ff ff ff ff ff 00 4c 83 a6 41 00 00 00 00
00 20 01 04 b5 22 16 78 03 0b d1 af 51 3d b6 23
0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 cb fe 40 64 b0 08 18 70 20 08
88 00 58 d7 10 00 00 1b cb fe 40 64 b0 08 c8 7a
20 08 88 00 58 d7 10 00 00 1b 00 00 00 fd 00 30
78 da da 42 01 00 00 00 00 00 00 00 00 00 00 02
00 00 00 00 19 96 c8 46 1c 5e c8 00 00 00 01 4c
70 20 79 02 00 20 00 0c ba 41 59 a6 41 00 00 00
00 00 16 00 21 00 1d 48 0d 98 08 40 0b 08 07 00
f2 ea 50 d7 d3 b6 3d 42 0b 01 45 54 40 5e d0 60
18 10 23 78 26 00 09 07 06 03 00 00 00 50 00 00
22 00 14 e7 f3 09 85 3f 0b 63 00 1f 00 07 00 07
07 17 00 07 00 07 00 81 00 1f 73 1a 00 00 03 03
30 78 00 a0 74 02 60 02 78 00 00 00 00 8d e3 05
80 00 e6 06 05 01 74 60 02 00 00 00 00 00 5f 90
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-drm-panel-samsung-add-atna60cl08-v1-1-73123789fcdb@linaro.org
|
|
Basic description for S6E3FC2X01 DDIC with attached panel AMS641RW.
Samsung AMS641RW is 6.41 inch, 1080x2340 pixels, 19.5:9 ratio panel
This panel has three supplies, while panel-simple-dsi is limited to one.
There is no user of this compatible, nor the compatible make sense.
Remove it from simple DSI panel definitions.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-1-8f8852e67417@ixit.cz
|
|
The Cirrus CS4271 codec can use an external clock as an input Master
Clock. When no crystal is used, the CS4271 component considers its MCLK
pin as an input pin and expects the external clock connected to provide
the Master Clock.
This clock is not documented in the binding.
Add the missing clock.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251029093921.624088-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix reST warnings in
Documentation/admin-guide/pm/intel_pstate.rst caused by missing explicit
hyperlink labels for section titles.
Before this change, the following errors were printed during
`make htmldocs`:
Documentation/admin-guide/pm/intel_pstate.rst:401:
ERROR: Indirect hyperlink target (id="id6") refers to target
"passive mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:517:
ERROR: Indirect hyperlink target (id="id9") refers to target
"active mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:611:
ERROR: Indirect hyperlink target (id="id15") refers to target
"global attributes", which is a duplicate, and cannot be used as
a unique reference.
ERROR: Duplicate target name, cannot be used as a unique reference:
"passive mode", "active mode", "global attributes".
These errors occurred because the sections "Active Mode",
"Active Mode With HWP", "Passive Mode", and "Global Attributes"
did not define explicit hyperlink labels. As a result, Sphinx
auto-generated duplicate anchors when the same titles appeared
multiple times within the document.
Because of this, the generated HTML documentation contained
broken references such as:
`active mode <Active Mode_>`_
`passive mode <Passive Mode_>`_
`global attributes <Global Attributes_>`_
This patch adds explicit hyperlink labels for the affected sections,
ensuring all references are unique and correctly resolved.
After applying this patch, `make htmldocs` completes without
any warnings, and all hyperlinks in intel_pstate.html render properly.
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20251029134737.42229-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document the Always-on Subsystem side channel on the Glymur SoC.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-4-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the Always-On Subsystem side channel on the Qualcomm Kaanapali
platform for communication with client found on the SoC such as
remoteprocs.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251022-knp-soc-binding-v2-2-3cd3f390f3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192c5 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch compatible from a const to an enum to accommodate both the vd55g1
and the vd65g4, which is the color variant.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Mention include/dt-bindings/media/video-interfaces.h in descriptions to
help avoid use hardcode in dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert nxp,tda1997x.txt to yaml format
Additional changes:
- update audio width to 8, 16, 24, 32.
- keep one example only.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert ti,tvp5150.txt to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
[Sakari Ailus: Align the endpoint properties to the right column.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document the Dongwoon Anatech DW9800K.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document Dongwoon DW9718S, DW9719 and DW9761 VCM devicetree bindings.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the compatible for an 64Kb EEPROM from Belling.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251028-msm8953-cci-v2-3-b5f9f7135326@lucaweiss.eu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When a system call that can copy user space addresses into the ring
buffer, it can copy up to 511 bytes of data. This can waste precious ring
buffer space if the user isn't interested in the output. Add a new file
"syscall_user_buf_size" that gets initialized to a new config
CONFIG_SYSCALL_BUF_SIZE_DEFAULT that defaults to 63.
The config also is used to limit how much perf can read from user space.
Also lower the max down to 165, as this isn't to record everything that a
system call may be passing through to the kernel. 165 is more than enough.
The reason for 165 is because adding one for the nul terminating byte, as
well as possibly needing to append the "..." string turns it into 170
bytes. As this needs to save up to 3 arguments and 3 * 170 is 510 which
fits nicely in 512 bytes (a power of 2).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.260068913@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
...and update references accordingly.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add this tool to tools/docs.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Move this tool out of scripts/ to join the other documentation tools; fix
up a couple of erroneous references in the process.
It's worth noting that this script will fail badly unless one has a
PYTHONPATH referencing scripts/lib/abi.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add this script to the growing collection of documentation tools.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The checktranslate.py tool currently languishes in scripts/; move it to
tools/docs and update references accordingly.
Cc: Alex Shi <alexs@kernel.org>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The scripts for managing the features docs are found in three different
directories; unite them all under tools/docs and update references as
needed.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
into HEAD
Merge IPQ5424 DeviceTree bindings for the Network Subsystem clock
controller from topic branch, to gain access to binding constants.
|
|
There are two DMA controllers on the A523, one in the main system area
and the other for the MCU. These are the same as the one found on the
A100. The only difference is the DMA endpoint (DRQ) layout.
Since the number of channels and endpoints are described with additional
generic properties, just add new A523-specific compatible strings and
fallback to the A100 one.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027125655.793277-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The H616 NAND controller is quite different from the A10 and A23 ones,
some registers offset changed, and some new one are introduced.
Also, the DMA handling is different (it uses chained descriptors)
So, introduce a new compatible to represent this version of the IP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Physmap supports minimal PM since commit 0bc448b49e8a017e ("mtd: maps:
physmap: Add minimal Runtime PM support"), so support it also when used
in DT configurations.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Introduce the compatible definition for Glymur QCOM SNPS DWC3.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024-glymur_usb_subsystem-v1-1-bf6faf63b566@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWMAC1000 supports 2 timestamping configurations to configure how
frequency adjustments are made to the ptp_clock, as well as the reported
timestamp values.
There was a previous attempt at upstreaming support for configuring this
mode by Olivier Dautricourt and Julien Beraud a few years back [1]
In a nutshell, the timestamping can be either set in fine mode or in
coarse mode.
In fine mode, which is the default, we use the overflow of an accumulator to
trigger frequency adjustments, but by doing so we lose precision on the
timetamps that are produced by the timestamping unit. The main drawback
is that the sub-second increment value, used to generate timestamps, can't be
set to lower than (2 / ptp_clock_freq).
The "fine" qualification comes from the frequent frequency adjustments we are
able to do, which is perfect for a PTP follower usecase.
In Coarse mode, we don't do frequency adjustments based on an
accumulator overflow. We can therefore have very fine subsecond
increment values, allowing for better timestamping precision. However
this mode works best when the ptp clock frequency is adjusted based on
an external signal, such as a PPS input produced by a GPS clock. This
mode is therefore perfect for a Grand-master usecase.
Introduce a driver-specific devlink parameter "ts_coarse" to enable or
disable coarse mode, keeping the "fine" mode as a default.
This can then be changed with:
devlink dev param set <dev> name ts_coarse value true cmode runtime
The associated documentation is also added.
[1] : https://lore.kernel.org/netdev/20200514102808.31163-1-olivier.dautricourt@orolia.com/
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251024070720.71174-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
This patch series introduces DAC, CODEC, and SPI control bus support
for Cirrus Logic CS530x variants, along with general code cleanup
and resolution of checkpatch.pl warnings.
|
|
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series enables the SPDIF and I2S hardware found on the Allwinner
A523/A527/T527 family SoCs. These SoCs have one SPDIF interface and
four I2S interfaces. All of them are capable of both playback and
capture, however the SPDIF driver only supports playback.
|
|
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
This is a small patch series that serves as a preparation for
adding HDMI audio playback support on QRB2210 RB1 board.
The patches here are for sound subsystem. The other series
will focus on qcom DT files.
The original series where one of the patches here were taken from is
https://lore.kernel.org/linux-sound/20250302-rb1_hdmi_sound_first-v1-0-81a87ae1503c@linaro.org/
and sndcard compable patch was added as new one.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
---
Changes in v2:
- rewrote commit description and subjects/titles where applicable;
- switched to SoC-level compatible for qrb2210 sndcard, therefore adjusted
DT schema changes;
- Link to v1: https://lore.kernel.org/r/20251007-qrb2210-qcm2290-sndcard-v1-0-8222141bca79@linaro.org
---
Alexey Klimov (2):
ASoC: dt-bindings: qcom,sm8250: add QRB2210 soundcard
ASoC: qcom: sm8250: add qrb2210-sndcard compatible string
Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 +
sound/soc/qcom/sm8250.c | 1 +
2 files changed, 2 insertions(+)
---
base-commit: fe45352cd106ae41b5ad3f0066c2e54dbb2dfd70
change-id: 20251007-qrb2210-qcm2290-sndcard-da54245aae3f
Best regards,
--
Alexey Klimov <alexey.klimov@linaro.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Until now, all products with an amplifier supported by the cs35l56 driver
have shipped with Microsoft Windows pre-installed. The factory calibration
of speaker protection has therefore been done using the Windows driver.
However, products that ship with a Linux-based distro must be able to
perform the factory calibration procedure from within the Linux-based
environment. This patch series adds that support.
NOTE: unfortunately this is yet another series that is mainly ASoC but
also needs some changes to the HDA driver, and they have build dependencies
on the ASoC code. I suggest taking this all through Mark's tree and we'll
avoid sending any other commits to the HDA driver until it has all landed
in Takashi's tree.
|
|
The uarts used in the RK3506 SoC are still the same dw-apb-uart compatible
type as on the SoCs that came before, so add the RK3506 to the list
of variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251021223209.193569-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add "cdns,eyeq5-gem" as compatible for the integrated GEM block inside
Mobileye EyeQ5 SoCs. It is different from other compatibles in two main
ways: (1) it requires a generic PHY and (2) it is better to keep TCP
Segmentation Offload (TSO) disabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251023-macb-eyeq5-v3-1-af509422c204@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
|
|
Document the support of the I/O synchronization parameters:
- skew-delay-input-ps;
- skew-delay-output-ps;
- st,io-sync.
Forbid 'skew-delay-input-ps' and 'skew-delay-output-ps' to be both
present on the same pin.
Allow the new properties only with compatibles that support them.
Add an example that uses the new properties.
Co-developed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Don't re-declare the standard pincfg properties; take them from
the default schema.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to specify independent skew delay value for the two pin's directions.
Make the new properties unavailable when the existing property
'skew-delay' is selected.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document the SCM compatible for Qualcomm Glymur SoC.
Secure Channel Manager(SCM) is used to communicate
with secure firmware.
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250918141738.2524269-1-pankaj.patil@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert VSC8531 Gigabit ethernet phy binding to DT schema format. While
at it add compatible string for VSC8541 PHY which is very much similar
to the VSC8531 PHY and is already supported in the kernel. VSC8541 PHY
is present on the Renesas RZ/T2H EVK.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251025064850.393797-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a handshake, an endpoint may specify a maximum record size limit.
Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the
maximum record size. Meaning that, the outgoing records from the kernel
can exceed a lower size negotiated during the handshake. In such a case,
the TLS endpoint must send a fatal "record_overflow" alert [1], and
thus the record is discarded.
Upcoming Western Digital NVMe-TCP hardware controllers implement TLS
support. For these devices, supporting TLS record size negotiation is
necessary because the maximum TLS record size supported by the controller
is less than the default 16KB currently used by the kernel.
Currently, there is no way to inform the kernel of such a limit. This patch
adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that
allows for setting the maximum plaintext fragment size. Once set, outgoing
records are no larger than the size specified. This option can be used to
specify the record size limit.
[1] https://www.rfc-editor.org/rfc/rfc8449
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pin-controller is used to control the Soc pins.
There are two pin-controllers on Cix Sky1 platform.
One is used under S0 state, the other is used under
S0 and S5 state.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The SPDIF hardware block in the A523 SoC has the same layout as the
H616 for the transmitter side. However unlike previous generations,
the hardware block now takes separate module clocks for the TX and RX
sides. This presumably allows the hardware to send and receive audio
streams at different sample rates. The new hardware also gained RX
insertion detection, and some extra information registers.
Add a new compatible for it without any fallbacks.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251027125655.793277-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As far as the author can tell, based on their respective manuals,
the I2S interface controllers found in the Allwinner A523 SoC is the
same as ones in the R329 SoC.
Add a SoC-specific compatible for it, with a fallback to the R329's
compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251027125655.793277-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document Xiaomi Redmi 3S (land).
Add qcom,msm8937 for msm-id, board-id allow-list.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20251014-msm8937-v10-2-b3e8da82e968@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The current KUnit documentation does not mention the kunit.enable
kernel parameter, making it unclear how to troubleshoot cases where
KUnit tests do not run as expected.
Add a note explaining kunit.enable parmaeter. Disabling this parameter
prevents all KUnit tests from running even if CONFIG_KUNIT is enabled.
Link: https://lore.kernel.org/r/20251021030605.41610-1-ishikawa.yuy-00@jp.fujitsu.com
Signed-off-by: Yuya Ishikawa <ishikawa.yuy-00@jp.fujitsu.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a compatible for Asus ZenFone 2 Laser/Selfie (1080p)
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251008182106.217340-2-xerikasxx@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for the sdm850-based tablet Huawei MateBook E 2019 using
its codename "planck".
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
Link: https://lore.kernel.org/r/20251008130052.11427-2-newwheatzjz@zohomail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Radxa Dragon Q6A is a single board computer, based on the Qualcomm
QCS6490 platform.
Document the top-level compatible for this board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xilin Wu <sophon@radxa.com>
Link: https://lore.kernel.org/r/20250929-radxa-dragon-q6a-v5-1-aa96ffc352f8@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|