| Age | Commit message (Collapse) | Author |
|
The api will be used by mdadm to set bitmap_type while creating new array
or assembling array, prepare to add a new bitmap.
Currently available options are:
cat /sys/block/md0/md/bitmap_type
none [bitmap]
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-6-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
Add ANS2 NVMe bindings for Apple A11 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250826-t8015-nvme-v5-1-caee6ab00144@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add apple,t8015-sart for SARTv0 found on the Apple A11 SoC, which
uses a different MMIO layout and is thus incompatible with the
previously described versions
Reviewed-by: Sven Peter <sven@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/r/20250821-t8015-nvme-v3-3-14a4178adf68@gmail.com
[sven: adjusted commit message]
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add TRNG node compatible string and reg properities.
Signed-off-by: Mounika Botcha <mounika.botcha@amd.com>
Signed-off-by: Harsh Jain <h.jain@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The largest batch of fixes here is a series of fixes for the Freescale
LPSPI driver which James Clark pulled out of their BSP while looking
at support for the NXP S32G version of the controller.
The majority of this turned out to be bug fixes that affect existing
systems with the actual S32G support being just a small quirk that
would be unremarkable by itself, the whole series has had a good
amount of testing and review and the individual patches are all pretty
straightforward by themselves.
We also have a few other driver specific fixes, including a relatively
large but simple one for the Cadence QuadSPI driver"
* tag 'spi-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: unregister ECC engine on probe error and device remove
spi: cadence-quadspi: Implement refcount to handle unbind during busy
spi: spi-fsl-lpspi: Add compatible for S32G
spi: spi-fsl-lpspi: Parameterize reading num-cs from hardware
spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum
spi: spi-fsl-lpspi: Constify devtype datas
dt-bindings: lpspi: Document support for S32G
spi: spi-fsl-lpspi: Clear status register after disabling the module
spi: spi-fsl-lpspi: Reset FIFO and disable module on transfer abort
spi: spi-fsl-lpspi: Set correct chip-select polarity bit
spi: spi-fsl-lpspi: Fix transmissions when using CONT
spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback
|
|
TDX host kernel now supports kexec/kdump. Update the documentation to
reflect that.
Opportunistically, remove the parentheses in "Kexec()" and move this
section under the "Erratum" section because the updated "Kexec" section
now refers to that erratum.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Link: https://lore.kernel.org/all/20250901160930.1785244-7-pbonzini%40redhat.com
|
|
Pull for-6.17-fixes to receive 79f919a89c9d ("cgroup: split
cgroup_destroy_wq into 3 workqueues") to resolve its conflict with
7fa33aa3b001 ("cgroup: WQ_PERCPU added to alloc_workqueue users"). The
latter adds WQ_PERCPU when creating cgroup_destroy_wq and the former splits
the workqueue into three. Resolve by applying WQ_PERCPU to the three split
workqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
|
|
These sysctl knobs were scheduled for removal in September 2025. That
time has come, so remove them.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
These four mount options were scheduled for removal in September 2025,
so remove them now.
Cc: preichl@redhat.com
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
We promised to turn off these old features by default in September 2025.
Do so now.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
Bindings for the pf530x series of voltage regulators
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902-pf530x-v7-1-10eb2542f944@carnegierobotics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The binding is for the Mayqueen Pixpaper e-ink display panel,
controlled via an SPI interface.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-2-d77c678c4ae3@gmail.com
|
|
Mayqueen is a Taiwan-based company primarily focused on the development
of arm64 development boards and e-paper displays.
Signed-off-by: Wig Cheng <onlywig@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-v5-1-d77c678c4ae3@gmail.com
|
|
List EDT ETML0700Z8DHA in the LVDS panel enumeration.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250829-drm-misc-next-v1-1-fedb48cf50dd@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250904090932.GA193997@linux.fritz.box
|
|
The Raspberry Pi RP1 chip has the Cadence GEM ethernet
controller, so add a compatible string for it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20250822093440.53941-3-svarbanov@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Broadcom BRCMSTB SDHCI Controller device supports Common
properties in terms of Capabilities.
Reference sdhci-common schema instead of mmc-controller in order
for capabilities to be specified in DT nodes avoiding warnings
from the DT compiler.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/181cc905566f2d9b2e5076295cd285230f81ed07.1756386531.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add "debug" option for "cfi=" bootparam to get details on early CFI
initialization steps so future Kees can find breakage easier.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-5-kees@kernel.org
|
|
The kernel-parameters.txt didn't have a section for the cfi= options.
Add it.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-3-kees@kernel.org
|
|
Absolute majority of callers are passing the 4th argument equal to
strlen() of the 3rd one.
Drop the v_size argument, add vfs_parse_fs_qstr() for the cases that
want independent length.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge CPUFreq updates for 6.18 from Viresh Kumar:
"- Minor improvements to Rust Cpumask APIs (Alice Ryhl, Baptiste Lepers,
and Shankari Anand).
- Minor cleanups and optimizations to various cpufreq drivers (Akhilesh
Patil, BowenYu, Dennis Beier, Liao Yuanhong, Zihuan Zhang, Florian
Fainelli, Taniya Das, Md Sadre Alam, and Christian Marangi).
- Enhancements for TI cpufreq driver (Judith Mendez, and Paresh Bhagat).
- Enhancements for mediatek cpufreq driver (Nicolas Frattaroli).
- Remove outdated cpufreq-dt.txt (Frank Li).
- Update MAINTAINERS for virtual-cpufreq maintainer (Saravana Kannan)."
* tag 'cpufreq-arm-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (28 commits)
cpufreq: mediatek: avoid redundant conditions
cpufreq/longhaul: handle NULL policy in longhaul_exit
cpufreq: tegra186: Use scope-based cleanup helper
cpufreq: mediatek: Use scope-based cleanup helper
cpufreq: s5pv210: Use scope-based cleanup helper
cpufreq: CPPC: Use scope-based cleanup helper
cpufreq: brcmstb-avs: Use scope-based cleanup helper
dt-bindings: Remove outdated cpufreq-dt.txt
arm64: dts: ti: k3-am62p: Fix supported hardware for 1GHz OPP
cpufreq: ti: Allow all silicon revisions to support OPPs
cpufreq: ti: Support more speed grades on AM62Px SoC
cpufreq: ti: Add support for AM62D2
cpufreq: dt-platdev: Blacklist ti,am62d2 SoC
rust: opp: update ARef and AlwaysRefCounted imports from sync::aref
cpufreq: mediatek-hw: don't use error path on NULL fdvfs
cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus()
rust: cpumask: Mark CpumaskVar as transparent
rust: cpumask: rename CpumaskVar::as[_mut]_ref to from_raw[_mut]
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS615 compatible
MAINTAINERS: Add myself as virtual-cpufreq maintainer
...
|
|
Convert the ASpeed GFX Display Controller binding to DT schema format.
There was a duplicate, incomplete binding in mfd which can be dropped.
Add the missing 'aspeed,ast2600-gfx' compatible and 'syscon' property.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20250829230442.1495926-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Describe JH7110 SoC DDR external memory interface.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Merge series from Jihed Chaibi <jihed.chaibi.dev@gmail.com>:
The series adds pin names for the es8316, wm8960, and nau8825
codecs to their respective binding files to improve the user
experience for board developers.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
|
|
The binding currently expects exactly 5 keycodes, which matches the
chip's theoretical maximum but probably not the number of touch keys on
any phone using the IST3032C. Add a minItems value of 2 to prevent
dt-validate complaints.
Also add another example to make sure the linux,keycodes property is
checked.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250824-imagis-minitems-v1-1-cea9db55e87f@dujemihanovic.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of adding ad-hoc debugging glue to the microcode loader each
time I need it, add debugging functionality which is not built by
default.
Simulate all patch handling the loader does except the actual loading of
the microcode patch into the hardware.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250820135043.19048-3-bp@kernel.org
|
|
The sun4i EMAC supports DMA for data transmission,
so it is necessary to add DMA options to the device tree bindings.
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/tencent_4E434174E9D516431365413D1B8047C6BB06@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a "microcode=" command line argument after which all options can be
passed in a comma-separated list.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://lore.kernel.org/20250820135043.19048-2-bp@kernel.org
|
|
Document the Axis ARTPEC-8 SoC binding and the grizzly board
which uses ARTPEC-8 SoC.
Signed-off-by: SungMin Park <smn1196@coasia.com>
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250901051926.59970-4-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add compatible for MSM8937.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250903-msm8937-v9-3-a097c91c5801@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.18
Merge the MSM8937 global clock controller binding through a topic branch
to allow merging the constants into the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
MSM8937 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250903-msm8937-v9-1-a097c91c5801@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The same hardware problem to QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE also
occurs on the capture streams on some USB devices. Add a new flag for
processing the quirk.
Link: https://lore.kernel.org/all/C22C1A172EBB9BD9+eccc2e4a-d21e-4a7d-848c-bbf3982feb94@uniontech.com/
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-2-d4ca777b8512@uniontech.com
|
|
support ADSP
Manage clock settings for ADSP solution. On Existing ADSP bypass
solutions, the macro and dcodec GDSCs are enabled using power domains
in lpass-va-macro which is not applicable for ADSP based platform.
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250903151337.1037246-2-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the wm8960 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-4-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the nau8825 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-3-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the es8316 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-2-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add devicetree binding document and related header file for
Amlogic S6 S7 S7D secure power domains.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822-pm-s6-s7-s7d-v1-1-82e3f3aff327@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On a vast majority of Qualcomm chipsets DisplayPort controller can
support several MST streams (up to 4x). To support MST these chipsets
use up to 4 stream pixel clocks for the DisplayPort controller and
several extra register regions. Expand corresponding region and clock
bindings for these platforms and fix example schema files to follow
updated bindings.
Note: On chipsets that support MST, the number of streams supported
can vary between controllers. For example, SA8775P supports 4 MST
streams on mdss_dp0 but only 2 streams on mdss_dp1.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672585/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-7-7526f0311eaa@oss.qualcomm.com
|
|
DP controller schema documents assigned-clocks and
assigned-clock-parents. However these assignments should not be a part
of the ABI: there are no actual requirements on the order of the
assignments, MST cases require different number of clocks to be
assigned, etc.
Instead of fixing up the documentation, drop the assigned-clock-parents
and assigned-clocks from the bindings. The generic clock/clock.yaml
already covers these properties.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672586/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-6-7526f0311eaa@oss.qualcomm.com
|
|
Add X1E80100 to the dp-controller bindings, it has DisplayPort
controller similar to other platforms, but it uses its own compatible
string.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672578/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-5-7526f0311eaa@oss.qualcomm.com
|
|
Fix c&p error and correct example to use 32-bit addressing (as the rest
of the example DT does) instead of 64-bit (as the platform does). It
got unnoticed before since DP controller node wasn't validated against
DT schema because of the missing compatible.
Fixes: 81de267367d4 ("dt-bindings: display/msm: Document MDSS on X1E80100")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672574/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-4-7526f0311eaa@oss.qualcomm.com
|
|
The qcom,sm7150-dp compatible is documented in schema. Mark DisplayPort
controller as compatible with SM8350.
Fixes: 726eded12dd7 ("dt-bindings: display/msm: Add SM7150 MDSS")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672572/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-3-7526f0311eaa@oss.qualcomm.com
|
|
Currently SM6350 uses qcom,sm8350-dp as a fallback compatible entry.
This works, but adding DP MST support will reveal that this SoC is
not fully compatible with SM8350 platform: the former one doesn't
provide MST support, while the latter one will get it. DT schema for
SM8350 is going to demand MST-related clocks which SM6350 doesn't
provide.
Add new entry for SM6350 with fallback to SC7180 (which belongs to the
same generation and also doesn't have MST support). SC7180 has been
supported by the Linux kernel long ago (and long before SM8350 support
was added).
Fixes: 39086151593a ("dt-bindings: display: msm: dp-controller: document SM6350 compatible")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672571/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-2-7526f0311eaa@oss.qualcomm.com
|
|
On Qualcomm SA8775P the DP controller might be driving either a
DisplayPort or a eDP sink (depending on the PHY that is tied to the
controller). Reflect that in the schema.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672569/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-1-7526f0311eaa@oss.qualcomm.com
|
|
Add device tree bindings for global clock controller on Glymur SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-6-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Glymur SoC TCSR block provides CLKREF clocks for EDP, PCIe and USB.
Add this to the TCSR clock controller binding together with identifiers
for the clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-2-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|