| Age | Commit message (Collapse) | Author |
|
The Actiontex MI424WR is a pretty widespread home router, made
in many different revisions.
Revisions A, C and D are based on IXP42x. We add a device tree
for the A/C variant and one for the D variant as these differ in
the location of the WAN PHY on the MDIO bus, and the ethernet
interfaces for the WAN PHY and the DSA switch are switched around.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250822-ixp4xx-mi424wr-dts-v2-3-cc804884474d@linaro.org
|
|
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, the first depends line of
ARM_HAS_GROUP_RELOCS is always true, so it can be safely removed.
Combine the !COMPILE_TEST dependency into the 'def_bool' line and update
the comment as well.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-3-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Interrupt support on host wakeup gpio for ste-ux500-samsung bluetooth.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Link: https://lore.kernel.org/r/20250823212732.356620-1-alex.t.tran@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
ste-nomadik-s8815.dtb: mmcsd-gpio: $nodename:0: 'mmcsd-gpio' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250115211627.193961-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Since the commit 3d86739c6343 ("floppy: always use the track buffer")
the CROSS_64KB() is not used by the driver, remove the leftovers.
Acked-by: Helge Deller <deller@gmx.de> #parisc
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The recent kstack erase changes appear to have uncovered an existing
issue with a missing header inclusion:
In file included from drivers/misc/lkdtm/kstack_erase.c:12:
In file included from include/linux/kstack_erase.h:16:
arch/arm/include/asm/stacktrace.h:48:21: error: call to undeclared function 'in_entry_text'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
48 | frame->ex_frame = in_entry_text(frame->pc);
| ^
Include asm/sections.h here so the compiler can see the in_entry_text()
declaration.
Fixes: 752ec621ef5c ("ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value")
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250807071902.4077714-1-arnd@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250819131607.86338-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250819131717.86713-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drop CONFIG_ARCH_MSM8X60 and CONFIG_ARCH_MSM8960 which were removed in
commit 99497df59427 ("ARM: qcom: merge remaining subplatforms into sensible
Kconfig entry").
Drop CONFIG_ARCH_MSM8916 and CONFIG_ARCH_MSM8974 which were removed in
commit 85148df36835 ("ARM: qcom: drop most of 32-bit ARCH_QCOM subtypes").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250819231652.15938-1-twoerner@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Touch keys feature on Galaxy Grand 2 is provided by Zinitix touchscreen.
Add property linux,keycodes to enable touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708122118.157791-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250819131736.86862-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The simple-audio-card configuration for the Armada 370 development
board incorrectly routed the left channel signal ("AIN1L") to both
sides of the stereo "In Jack".
This commit corrects the typo for the right channel, changing the
second "AIN1L" entry to "AIN1R" to enable proper stereo input
recording.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add arm,num-irq-priority-bits(4) for nvic to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dtb: interrupt-controller@e000e100 (arm,armv7m-nvic): 'arm,num-irq-priority-bits' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add grp surfix for pinctrl to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dtb: pinctrl@40048000 (fsl,vf610-iomuxc): i2c0grp-gpio: {'fsl,pins': [[144, 0, 0, 0, 12738, 148, 0, 0, 0, 12738]], 'phandle': 19} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,vf610-nfc.yaml references nand-controller.yaml, which only allows the
node to be 'nand-controller'.
Change it accordingly to fix the following dt-schema warning:
$nodename:0: 'nand@400e0000' does not match '^nand-controller(@.*)?'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,vf610-iomuxc.yaml references pinctrl.yaml, which only allows the node
to be either 'pinctrl' or 'pinmux'.
Change the node name to 'pinctrl' to fix the following dt-schema
warning:
iomuxc@40048000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Invoke power-domain.yaml if node name as 'power-control'.
Rcpm actually are not power domain controller. It just control wakeup
capability. So rename it as wakeup-control. Implements the same change
as commit e39f567e1c38c ("arm64: dts: layerscape: rename rcpm as
wakeup-control from power-control") for arm64 layerscapes.
While at it, also remove superfluous #power-domain-cells
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The touchscreen compatible in the overlays has one extra entry. Remove it
to fix the dtbs_check warning:
touchscreen@38 (edt,edt-ft5406): compatible: ['edt,edt-ft5406', 'edt,edt-ft5x06'] is too long
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
qflash
The jedec SPI-NOR flash node itself has no partitions, but the partitions
subnode.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to binding doc mmc/fsl,esdhc.yaml and driver
drivers/mmc/host/sdhci-of-esdhc.c, default is big-endian, should
use little-endian for little-endian system. Remove 'big-endian' to fix
below warning:
esdhc@1560000 (fsl,ls1021a-esdhc): Unevaluated properties are not allowed ('big-endian', 'bus-width' were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 7e0685a0c4c27 ("arm64: dts: ls1012a: fix DWC3 USB VBUS glitch issue")
erroneously added this to ls1021a as well. Despite that apparently the
workaround has already been applied unconditional at
commit a6ba1e453174 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally")
Remove it to fix CHECK_DTBS warning:
usb@3100000 (snps,dwc3): Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a dedicated compatible for ls1021a. Using it also fixes the
warning regarding big-endian:
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dtb: watchdog@2ad0000 (fsl,imx21-wdt): big-endian: False schema does not allow True
Also remove clock-names which is neither used nor specified.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to binding doc memory-controllers/fsl/fsl,ddr.yaml
and driver drivers/edac/fsl_ddr_edac.c, default is big-endian, should
use little-endian for little-endian system. Remove 'big-endian' to fix
below warning:
arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dtb: memory-controller@1080000 (fsl,qoriq-memory-controller): 'big-endian' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
queue-group nodes don't need them anyway as they are inherited from
the corresponding ethernet nodes. Fixes the dtbs_check warning:
ethernet@2d10000 (fsl,etsec2): queue-group@2d10000: '#address-cells', '#size-cells' do not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing reg property to enet nodes. This fixes the dtbs_check warning:
Warning (unit_address_vs_reg): /soc/ethernet@2d10000: node has a unit name, but no reg or ranges property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
RTC nodes are supposed to be named rtc@. Also remove reg-names which is
neither used nor specified.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to bindings Rx DMA channel comes first if Rx & Tx is used.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
0x8390000 is reserved memory, but 0x8380000 is the QSPI base address
in RM. But register have offset of 0x8000, so first 'reg' entry address
is used for node unit address.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Although the GIC base address stated in RM is 0x1400000, the first address
being used is 0x1401000. This is similar to imx6ul.dtsi where the
GIC base address in the RM is 0xa00000 but 0xa01000 being used in DTS.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The uprobe_write has special path to restore the original page when we
write original instruction back. This happens when uprobe_write detects
that we want to write anything else but breakpoint instruction.
Moving the detection away and passing it to uprobe_write as argument,
so it's possible to write different instructions (other than just
breakpoint and rest).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-7-jolsa@kernel.org
|
|
Despite the current configuration being compliant with the technical
reference manual (TRM), testing on the system showed that resuming from
suspend via UART4 (used as the console) fails unless any other UART
is also enabled.
In our use case, UART2 is enabled to ensure reliable resume when UART4
is used as the console.
Signed-off-by: Wolfgang Birkner <wolfgang.birkner@bshg.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819131752.86948-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
B2120 boards are internal boards which never were commercialised.
Drop them.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
ST's STiH415 and STiH416 platforms have already been removed since
a while. Remove some remaining bits within the mach-sti.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Stick to the documentation and rename both SATA phy-names properties to
what is expected.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
According to the schematics, the CAN transceiver is connected to pins
GP7_3 and GP7_4, which correspond to CAN0 data group B.
Fixes: 0768fbad7fba1d27 ("ARM: shmobile: porter: add CAN0 DT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/70ad9bc44d6cea92197c42eedcad6b3d0641d26a.1751032025.git.geert+renesas@glider.be
|
|
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT. Add bootph-all for all nodes that are used in the
bootloader on Renesas RZ/A1 SoCs.
All SoCs require BSC bus, PFC pin control, and OSTM0 timer access during
all stages of the boot process, those are marked using bootph-all
property, and so is the SoC bus node which contains the PFC and OSTM
IPs.
Each board console UART is also marked as bootph-all to make it
available in all stages of the boot process.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806150448.9669-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for the touchkeys on the Samsung Galaxy Note 3 (hlte).
Signed-off-by: Adam Honse <calcprogrammer1@gmail.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250618-hlte-touchkey-v2-1-2cf188b57e31@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the same definition as pm8058.dtsi. Since vibrator is used only by
some devices, disable it by default and let it be enabled explicitly.
Signed-off-by: Shinjo Park <peremen@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250613194253.20080-1-peremen@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add initial device tree support for the Sony Xperia SP (codename:
sony-huashan), a smartphone based on the Qualcomm MSM8960T SoC.
There are two variants of the Xperia SP, one without LTE and one with
LTE. This device tree should work for both variants, though it has only
been tested on the non-LTE variant.
The following are currently supported:
- Serial console support via gsbi8
- GPIO keys for volume up/down buttons
- PM8921 keypad with camera focus/capture keys
- eMMC (sdcc1) and micro SD card (sdcc3) support
- USB OTG support
Other hardware features are not yet implemented.
Booting notes:
Booting a kernel requires using the Sony ELF boot image format, which
embeds the kernel, ramdisk, RPM firmware, and cmdline. This can be
created using the `mkelf` tool. For example:
python2 mkelf.py -o boot.img \
kernel+dtb@0x80208000 \
ramdisk.img@0x81900000 \
RPM.bin@0x00020000,rpm \
cmdline.txt@cmdline
The resulting `boot.img` can then be flashed via fastboot. A detailed
guide, including an alternative method, is available at:
https://wiki.postmarketos.org/wiki/Sony_Xperia_SP_(sony-huashan)
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-5-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Not all devices use gsbi1 and gsbi5, so these nodes should be disabled
in the SoC dtsi, following the existing pattern used for gsbi3. The
upstream samsung-expressatt and msm8960-cdp devices already have status
"okay" for these nodes, so this change should not break existing
functionality.
This eliminates the following error messages when gsbi nodes are not
configured in the board's device tree:
[ 1.109723] gsbi 16000000.gsbi: missing mode configuration
[ 1.109797] gsbi 16000000.gsbi: probe with driver gsbi failed with error -22
(Note: Xperia SP doesn't use gsbi5)
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-3-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The LTE variant of the MSM8960 SoC has a gsbi8 node used for the
serial console.
That's if the downstream kernel is to be believed, as Xperia SP has
a serial console on gsbi8 even on the non-LTE variant.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-2-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Adds sdcc3-default-state and sdcc3-sleep-state pinctrl states for
MSM8960. These are required for devices like Sony Xperia SP to ensure
micro SD card functionality, though they are a no-op on the Samsung
Galaxy Express.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-1-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use SZ_256K instead of calculating the same value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/c54097a263eb3e451e5e223609a3630d4409dcdd.1753951039.git.geert+renesas@glider.be
|
|
Common name for Ethernet controllers is "ethernet", not "eth", also
recommended by Devicetree specification in "Generic Names
Recommendation". Verified lack of impact using dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250717142301.92548-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The used bindings syntax has been deprecated and doesn't work properly
anymore.
Use the newer (and non-deprecated) fixed-layout approach. See commit
bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for
details.
Signed-off-by: Tan Siewert <tan@siewert.io>
Reviewed-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://patch.msgid.link/20250803151949.68618-4-tan@siewert.io
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|