| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
|
|
As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.
At the same time, update all defconfigs that reference the old kconfig
symbol name.
While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/arm
TI DaVinci updates for v6.16-rc1
- remove support for the da830 SoC
- increase the panel FIFO threshold in da850-evm
* tag 'davinci-updates-for-v6.16-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
ARM: dts: davinci: da850-evm: Increase fifo threshold
ARM: davinci: remove support for da830
Link: https://lore.kernel.org/r/20250519090232.13147-1-brgl@bgdev.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Arm32 DeviceTree updates for v6.16
This adds missing LVDS clocks to APQ8064 display controller. The unused HDMI HPD
gpio on ifc6410 is dropped (chip uses pinmuxed hpd function).
Missing timer clocks are added to MSM8960 to address bindings warning.
* tag 'qcom-arm32-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064-ifc6410: drop HDMI HPD GPIO
ARM: dts: qcom: apq8064: link LVDS clocks
ARM: dts: qcom-msm8960: add missing clocks to the timer node
Link: https://lore.kernel.org/r/20250520024716.39418-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
RK3036 usbphy addition and two Sonoff iHost adjustments.
* tag 'v6.16-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin
ARM: dts: rockchip: Sonoff-iHost: correct IO domain voltages
ARM: dts: rockchip: Sonoff-iHost: adjust SDIO for stability
Link: https://lore.kernel.org/r/3652020.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.16
This update includes:
- more controllers enabled for SAMA7D65 SoC (Ethernet, Flexcoms,
SRAM, DRAM, RTC, RTT, GBPR)
- cleanups and fixes for Calao boards
* tag 'at91-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g54_curiosity: Add fixed-partitions for spi-nor flash
ARM: dts: microchip: sama7d65: Add RTT timer to curiosity board
ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65 SoC
ARM: dts: microchip: sama7d65: Add SRAM and DRAM components support
ARM: dts: microchip: sama7d65_curiosity: add EEPROM
ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosity
ARM: dts: microchip: sama7d65: Enable GMAC interface
ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC
ARM: dts: microchip: sama7d65: Add gmac interfaces for sama7d65 SoC
ARM: dts: at91: at91sam9263: fix NAND chip selects
ARM: dts: at91: usb_a9g20: move wrong RTC node
ARM: dts: at91: calao_usb: simplify chosen node
ARM: dts: at91: usb_a9260: use 'stdout-path'
ARM: dts: at91: calao_usb: simplify memory node
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select
ARM: dts: at91: usb_a9g20: add SPI EEPROM
Link: https://lore.kernel.org/r/20250516055330.10852-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.16
Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1
Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.
Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100
Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)
Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)
Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6
* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...
Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.16
Introduce support for the AP8064-based LG Nexus 4. MSM8226 is extended
with modem-related features, the LTE-capable variant MSM8926 is
introduced, and modem support is enabled on Samsung Galaxy Tab 4.
Display-related clocks and power-domains are defined for the simple
framebuffer of Motorola Moto G, to allow booting without
clk_ignore_unused and pd_ignore_unused.
On MSM8960 SDCC BAM and thermal sensor (tsens) is introduced.
* tag 'qcom-arm32-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: move replicator out of soc node
ARM: dts: qcom: apq8064: use new compatible for SPS SIC device
ARM: dts: qcom: apq8064: use new compatible for SFPB device
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device
ARM: dts: qcom: apq8064: add missing clocks to the timer node
ARM: dts: qcom: apq8064-lg-nexus4-mako: Enable WiFi
ARM: dts: qcom: msm8226-motorola-falcon: specify vddio_disp output voltage
ARM: dts: qcom: msm8226-motorola-falcon: limit TPS65132 to 5.4V
ARM: dts: qcom: msm8226-motorola-falcon: add I2C clock frequencies
ARM: dts: qcom: msm8226-motorola-falcon: add clocks, power-domain to simpleFB
ARM: dts: qcom: ipq4019: Drop redundant CPU "clock-latency"
ARM: dts: qcom: sdx55/sdx65: Fix CPU power-domain-names
ARM: dts: qcom: msm8974: Use the header with DSI phy clock IDs
ARM: dts: qcom: msm8226: Use the header with DSI phy clock IDs
Link: https://lore.kernel.org/r/20250513214111.43401-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
VT8500 DTS ARM changes for v6.16
1. New board: VIA APC Rock/Paper.
2. Add SCC ID register/socinfo node.
3. List all timer interrupts.
* tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: list all four timer interrupts
ARM: dts: vt8500: add DT nodes for the system config ID register
ARM: dts: vt8500: Add VIA APC Rock/Paper board
dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards
Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.16
The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.
Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.
IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.
Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.
The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.
On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.
The MSM8953 platform gains another UART and interconnects.
On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.
Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.
The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.
Display and GPU are enabled for the Nothing Phone (1).
QCS615 platform gains command DB definition.
The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.
On SAR2130P PCIe EP device nodes are added.
On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.
The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.
On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.
On SM8450 the PCIe endpoint controller is described.
For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.
SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.
On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.
On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.
On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.
Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.
DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.
A couple of DWC3 quirks are added across a lot of platforms.
The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.
* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
arm64: dts: qcom: qcs8300: add the pcie smmu node
arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
arm64: dts: qcom: msm8953: Add interconnects
arm64: dts: qcom: msm8953: Add uart_5
arm64: dts: qcom: sm8350: Use q6asm defines for reg
arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
arm64: dts: qcom: sdm850*: Use q6asm defines for reg
arm64: dts: qcom: sdm845*: Use q6asm defines for reg
arm64: dts: qcom: sc7280: Use q6asm defines for reg
arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
arm64: dts: qcom: msm8996*: Use q6asm defines for reg
arm64: dts: qcom: msm8953: Use q6asm defines for reg
arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
...
Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
Nuvoton ARM devicetree updates for v6.16
- MMC, OHCI, UDC and EDAC blocks added to the NPCM7XX DTSI
- Fixes for GPIO hog names in the NPCM730 and RunBMC Olympus platforms
* tag 'nuvoton-arm-6.16-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: nuvoton: Add MMC Nodes
ARM: dts: nuvoton: Add OHCI node
ARM: dts: nuvoton: Add UDC nodes
ARM: dts: nuvoton: Add EDAC node
ARM: dts: nuvoton: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/CACPK8Xe=f_hNNWUGL670x4-OeKgDB+2P+mxp5BaTLW==T5jE_A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ASPEED devices have SRAM, but don't require it for basic function
(or any function; there's no known users of the driver).
Fixes: 8c2ed9bcfbeb ("arm: Add Aspeed machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patch.msgid.link/20250115103942.421429-1-joel@jms.id.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The driver does not use legacy GPIO API, stop including this header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250331093650.4028999-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513101023.21552-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT for v6.16:
- UART RX/TX pull-up pinconf properties for all SoCs
- New Boards:
- Meson8 TCU Fernsehfee 3.0
* tag 'amlogic-arm-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8-fernsehfee3: Describe regulators
ARM: dts: amlogic: Add TCU Fernsehfee 3.0
dt-bindings: arm: amlogic: Add TCU Fernsehfee 3.0 board
dt-bindings: vendor-prefixes: Add TC Unterhaltungselektronik AG
ARM: dts: amlogic: meson8b: enable UART RX and TX pull up by default
ARM: dts: amlogic: meson8: enable UART RX and TX pull up by default
Link: https://lore.kernel.org/r/838c5305-5c5b-4232-b7fe-86598dc50ace@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Recently DT bindings expect 'wifi' as node name:
s5pv210-fascinate4g.dtb: wlan@1: $nodename:0: 'wlan@1' does not match '^wifi(@.*)?$'
Link: https://lore.kernel.org/r/20250424084655.105011-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513101023.21552-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* Rename constants to their standard PE names:
- MZ_MAGIC -> IMAGE_DOS_SIGNATURE
- PE_MAGIC -> IMAGE_NT_SIGNATURE
- PE_OPT_MAGIC_PE32_ROM -> IMAGE_ROM_OPTIONAL_HDR_MAGIC
- PE_OPT_MAGIC_PE32 -> IMAGE_NT_OPTIONAL_HDR32_MAGIC
- PE_OPT_MAGIC_PE32PLUS -> IMAGE_NT_OPTIONAL_HDR64_MAGIC
- IMAGE_DLL_CHARACTERISTICS_NX_COMPAT -> IMAGE_DLLCHARACTERISTICS_NX_COMPAT
* Import constants and their description from readpe and file projects
which contains current up-to-date information:
- IMAGE_FILE_MACHINE_*
- IMAGE_FILE_*
- IMAGE_SUBSYSTEM_*
- IMAGE_DLLCHARACTERISTICS_*
- IMAGE_DLLCHARACTERISTICS_EX_*
- IMAGE_DEBUG_TYPE_*
* Add missing IMAGE_SCN_* constants and update their incorrect description
* Fix incorrect value of IMAGE_SCN_MEM_PURGEABLE constant
* Add description for win32_version and loader_flags PE fields
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
There is no need to specify separate HPD gpio for the HDMI block. Use
built-in HPD in order to detect if the monitor is plugged or not.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250209-fd-hdmi-hpd-v4-16-6224568ed87f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-15-jirislaby@kernel.org
|
|
Add fixed-partitions for spi-nor flash to match the at91 boot flow
and layout of the nand flash.
Partitions can be listed from /proc/mtd:
[root@sama7g54 ~]$ cat /proc/mtd | grep qspi
mtd6: 00040000 00001000 "qspi1: at91bootstrap"
mtd7: 00100000 00001000 "qspi1: u-boot"
mtd8: 00040000 00001000 "qspi1: u-boot env"
mtd9: 00080000 00001000 "qspi1: device tree"
mtd10: 00600000 00001000 "qspi1: kernel"
[root@sama7g54 ~]$ mtdinfo /dev/mtd10
mtd10
Name: qspi1: kernel
Type: nor
Eraseblock size: 4096 bytes, 4.0 KiB
Amount of eraseblocks: 1536 (6291456 bytes, 6.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:20
Bad blocks are allowed: false
Device is writable: true
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250429064547.5807-1-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTT timer with backup register for SAMA7D65_Curiosity board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/463581224a07bf122c6907d34a0c5c71b1cc73e1.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTT support for SAMA7D65 SoC. The GPBR is added so the SoC is able
to store the RTT time data.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/e8868ef06102241b47883ba10edaed751831be6d.1744666011.git.Ryan.Wanner@microchip.com
[claudiu.beznea: keep nodes sorted by their address]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add SRAM, secumod, UDDRC, and DDR3phy to enable support for low power modes.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/354ecd628fdd292d2125570a6b10a93cbecb7706.1744666011.git.Ryan.Wanner@microchip.com
[claudiu.beznea: keep nodes sorted by their address]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
If the MAC address is not fetched and loaded by U-boot then Linux will
have to load the address. The EEPROM and nvmem-layout to describe
EUI48 MAC address regions.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/96ee6832d9b55acfae8d3560f625798025dfd89c.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: added nvmem properties in gmac0 node before the status
one]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add MCP16502 to the sama7d65_curiosity board to control voltages in the
MPU. The device is connected to twi 10 interface
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/60f6b7764227bb42c74404e8ca1388477183b7b5.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: drop regulator-suspend-voltage for ldo2 as it is not
needed]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Enable GMAC0 interface for sama7d65_curiosity board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/fca0c1deb74006cdedbdd71061dec9dabf1e9b9a.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: move gmac0 node to keep the nodes alphanumerically
sorted, dropped status property on the PHY node, added missing blank
line]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add FLEXCOMs to the SAMA7D65 SoC device tree.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/d474fcd850978261ac889950ac1c3a36bc6d3926.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use vendor specific properties at the end of the node,
align DMA entries, add missing spaces]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add support for GMAC interfaces on SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/05b107796b6f3a173d0dd0a5b2107b675cfd994e.1743523114.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The rk3036 does contain a usb2phy, just until now it was just used
implicitly without additional configuration. As we now have the bits
in place for it getting actually controlled, add the necessary phy-node
to the GRF simple-mfd.
Enable the phy-ports in the same patch to not create bisectability
issues, as hooking up the phys to the usb controllers would create
probe deferrals until a board enables them. Doing everything in one
patch, solves that issue.
Only rk3036-kylin actually enabled the usb controllers, so is the only
board affected.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503201512.991277-4-heiko@sntech.de
|
|
Link LVDS clocks to the from MDP4 to the MMCC and back from the MMCC
to the MDP4 display controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-7-6b212160b44c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Solved by Dmitry Baryshkov on the APQ8064 SoC
Link: https://lore.kernel.org/all/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com/
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-expressatt-solve-dts-errors-v1-1-14012a4bc315@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When operating at low speeds, the display may throw an underflow
error and the display itself goes blank. Increasing the fifo-th
value appears to correct this problem and the display can now
operate when the system is operating at speeds as low as 100MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504102959.81830-1-aford173@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for Ultratronik's stm32mp157c fly board. This board embeds
a STM32MP157c SOC and 1GB of DDR3. Several connections are available on
this boards: 2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
This patch enables basic support for a kernel boot - SD-card or eMMC.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Link: https://lore.kernel.org/r/20250508143818.2574558-5-goran.radni@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The board includes an STM32H747XI SoC with the following resources:
- 2 Mbytes Flash
- 1 Mbyte SRAM
- LCD-TFT controller
- MIPI-DSI interface
- FD-CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
- camera interface
Detailed information can be found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add an additional pin map configuration for using the USART1 controller
on the stm32h743 MCU.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-8-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add a pin map configuration for using the UART8 controller on the
stm32h743 MCU.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add support for UART8 by applying the settings specified in the
reference manual RM0433.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The STM32H747 is a dual-core MCU (Cortex-M7 running up to 480 MHz +
Cortex-M4 running up to 240 MHz) containing from 1 to 2 Mbytes of Flash
memory and 1 Mbyte of internal RAM.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Allow expanding possible configurations for the same peripheral,
consistent with the scheme adopted in Linux.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
stm32h750i-art-pi.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250424084706.105049-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add device tree node for the low power timer on the STM32F746.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20250404143514.860126-1-ben.wolsieffer@hefring.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Set STM32 ADC1&2 as consumers of BSEC, to retrieve vrefint calibration
data on STM32MP13x SoCs.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-3-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Describe vrefint calibration cell to be retrieved through bsec,
on STM32MP13x SoCs family.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-2-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Because current PWM Kconfig is sorting by symbol name,
it looks strange ordering in menuconfig.
=> [ ] Renesas R-Car PWM support
=> [ ] Renesas TPU PWM support
[ ] Rockchip PWM support
=> [ ] Renesas RZ/G2L General PWM Timer support
=> [ ] Renesas RZ/G2L MTU3a PWM Timer support
Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas,
and sort it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into pwm/for-next
Renesas ARM defconfig updates for v6.16 (take two)
- Enable modular support for the Renesas RZ/G2L GPT and MSIOF sound in
the ARM64 defconfig,
- Enable more support for RZN1D-DB/EB in shmobile_defconfig.
It is merged into the pwm tree due to the next patch renaming
PWM_RZG2L_GPT which has a use added in the arm64 defconfig.
|
