| Age | Commit message (Collapse) | Author |
|---|
|
The MIN_RMA size checks in fadump_setup_param_area() use
(MIN_RMA * 1024 * 1024), which is evaluated in int and can
overflow when MIN_RMA is increased to values such as SZ_2G,
triggering compiler warnings such as:
warning: integer overflow in expression of type 'int'
results in '0' [-Woverflow]
Define MIN_RMA directly in bytes using SZ_1M and update the
callers accordingly. This avoids repeated unit conversions and
prevents integer overflow.
Also convert MIN_RMA back to MB when populating the firmware
architecture vector, since firmware expects the value in MB.
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/310b040acef712fdc79e3e37d0f4c2213938b556.1781589284.git.sayalip@linux.ibm.com
|
|
During a syscall restart, block KUAP so that pending interrupts can be
replayed. The original KUAP state is not restored before returning to
userspace, causing subsequent userspace accesses to fault and eventually
trigger bad_access_pkey(), crashing the kernel.
The original KUAP register values are already saved in
arch_enter_from_user_mode(). Restore them on the syscall restart exit
path before returning to userspace.
Fixes: bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
Reported-by: Sayali Patil <sayalip@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/fcd11556-27ac-4cd7-8c77-50716dec6985@linux.ibm.com/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Tested-by: Sayali Patil <sayalip@linux.ibm.com>
[Maddy: Added Closes tag]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260615162617.2861795-1-mkchauras@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Accelerate CRC64-NVME for 32-bit ARM by refactoring the arm64 NEON
intrinsics implementation to be shared by 32-bit and 64-bit.
Also apply a similar cleanup to the 32-bit ARM NEON implementation of
xor_gen(), where it now reuses code from the 64-bit implementation"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: aegis128 - Use neon-intrinsics.h on ARM too
lib/crc: arm: Enable arm64's NEON intrinsics implementation of crc64
lib/crc: Turn NEON intrinsics crc64 implementation into common code
xor/arm64: Use shared NEON intrinsics implementation from 32-bit ARM
xor/arm: Replace vectorized implementation with arm64's intrinsics
ARM: Add a neon-intrinsics.h header like on arm64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
|
|
A comment in arch/xtensa/include/asm/platform.h incorrectly refers to
CONFIG_XTENSA_CALIBRATE instead of CONFIG_XTENSA_CALIBRATE_CCOUNT.
Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Message-ID: <20260615224957.21574-1-enelsonmoore@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"There are a few cleanups, and some changes that should allow TDX and
kexec to coexist nicely.
The biggest change, however, is support for updating the TDX module
after boot, just like CPU microcode. TDX users really want this
because it lets them do security updates without tearing things down
and rebooting.
- Add TDX module update support
- Make kexec and TDX finally place nice together
- Put TDX error codes into a single header"
* tag 'x86_tdx_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/virt/tdx: Document TDX module update
x86/virt/tdx: Enable TDX module runtime updates
x86/virt/tdx: Refresh TDX module version after update
coco/tdx-host: Lock out module updates when reading version
x86/virt/seamldr: Add module update locking
x86/virt/tdx: Restore TDX module state
x86/virt/seamldr: Initialize the newly-installed TDX module
x86/virt/seamldr: Install a new TDX module
x86/virt/tdx: Reset software states during TDX module shutdown
x86/virt/seamldr: Shut down the current TDX module
x86/virt/seamldr: Abort updates after a failed step
x86/virt/seamldr: Introduce skeleton for TDX module updates
x86/virt/seamldr: Allocate and populate a module update request
coco/tdx-host: Implement firmware upload sysfs ABI for TDX module updates
coco/tdx-host: Don't expose P-SEAMLDR information on CPUs with erratum
coco/tdx-host: Expose P-SEAMLDR information via sysfs
x86/virt/seamldr: Add a helper to retrieve P-SEAMLDR information
x86/virt/seamldr: Introduce a wrapper for P-SEAMLDR SEAMCALLs
coco/tdx-host: Expose TDX module version
coco/tdx-host: Introduce a "tdx_host" device
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"There's a small comment fixup, followed by an actual bug fix. The bug
fix is slightly new territory for us. It fixes a real regression, but
it is from ~6.18 not a _new_ regression. It was mostly only biting
folks doing hotplug memory testing. So, it was queued in here and held
for the merge window instead of going via x86/urgent.
- Fix freeing of PMD-sized vmemmap pages
- Update comment about pgd_list"
* tag 'x86_mm_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix freeing of PMD-sized vmemmap pages
x86: Update comment about pgd_list
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"These are the usual random pile, with the one exception of moving Rick
over to be a TDX maintainer. Rick has been doing a great job with TDX
contributions, especially on the host side of things. It's time to
promote him to "M".
- Move Rick Edgecombe to TDX maintainer
- Remove unused header
- Ensure printf() validation in all configs"
* tag 'x86_misc_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Move Rick Edgecombe to TDX maintainer
x86: Remove unnecessary architecture-specific <asm/device.h>
x86/bug: Put HAVE_ARCH_BUG_FORMAT_ARGS WARN definitions inside __ASSEMBLER__
x86/bug: Add printf() validation to HAVE_ARCH_BUG_FORMAT_ARGS WARNs
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Remove redundant GHCB initialization guards in the SEV page state and
SVSM call paths now that the GHCB helpers handle early-boot fallback
internally
- Skip SNP initialization in the CCP driver immediately when the
preparation step fails rather than proceeding to an operation that
will certainly fail
- Abort SNP preparation and return an error when not all CPUs are
online, since the firmware enforces that every CPU enables SNP and
will fail init if not
- Simplify the VMM communication exception entry path by replacing
separate kernel and user mode macros with a single handler that
dispatches based on the current privilege level
* tag 'x86_sev_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/sev: Remove redundant ghcbs_initialized checks around __sev_{get,put}_ghcb()
crypto/ccp: Skip SNP_INIT if preparation fails
x86/sev: Do not initialize SNP if missing CPUs
x86/entry: Zap the #VC entry user and kernel macros
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- Move the zero-revision fixup for AMD microcode to the patch level
retrieval function and restrict it to Zen family processors, ensuring
patch level arithmetic always operates on a valid revision
- Fix an incorrect comment about which CPUID bit is checked when
determining whether the microcode loader should be disabled
- Add the latest Intel microcode revision data for a broad range of
processor models and steppings and add the script which generates the
header of minimum expected Intel microcode revisions
* tag 'x86_microcode_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Move the no-revision fixup to get_patch_level()
x86/microcode: Fix comment in microcode_loader_disabled()
scripts/x86/intel: Add a script to update the old microcode list
x86/microcode/intel: Refresh old_microcode defines with Nov 2025 release
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual pile of cleanups and fixlets the cat dragged in
* tag 'x86_cleanups_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove obsolete aperfmperf_get_khz() declaration
x86/pmem: Check for platform_device_alloc() retval
x86/platform/uv: Use str_enabled_disabled() in uv_nmi_setup_hubless_intr()
x86/cpu: Keep the PROCESSOR_SELECT menu together
x86/tlb: Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
x86/purgatory: Fix #endif comment
x86/boot: Get rid of kstrtoull()
x86/boot/compressed: Use boot_kstrtoul() for hugepages= parsing
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Preparatory work for MPAM counter assignment:
- Simplify the error handling path when creating monitor group event
configuration directories
- Make the MBM event filter configurable only on architectures that
support it and expose this with the respective file modes in the
event config
- Disallow the MBA software controller on systems where MBM counters
are assignable, as it requires continuous bandwidth measurement
that assignable counters do not guarantee
- Replace a compile-time Kconfig option for fixed counter assignment
with a per-architecture runtime property, and expose whether the
counter assignment mode is changeable to userspace
- Continue counter allocation across all domains instead of aborting
at the first failure
- Document that automatic MBM counter assignment is best effort and
may not assign counters to all domains
- Document the behavior of task ID 0 and idle tasks in the resctrl
tasks file"
* tag 'x86_cache_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Document tasks file behaviour for task id 0 and idle tasks
fs/resctrl: Document that automatic counter assignment is best effort
fs/resctrl: Continue counter allocation after failure
fs/resctrl: Add monitor property 'mbm_cntr_assign_fixed'
fs/resctrl: Disallow the software controller when MBM counters are assignable
x86,fs/resctrl: Create 'event_filter' files read only if they're not configurable
fs/resctrl: Tidy up the error path in resctrl_mkdir_event_configs()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only. Do the
same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the generic
variant
- Make consistent the calling order between
page_table_check_pte_clear() and secure page conversion across all
code paths
- Rearrange some fields within AP and zcrypt structs to reduce memory
consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code, to
enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct the
indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
* tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390: Revert support for DCACHE_WORD_ACCESS
s390/process: Fix kernel thread function pointer type
s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C
s390/memmove: Optimize backward copy case
s390/string: Convert memset(16|32|64)() to C
s390/string: Convert memcpy() to C
s390/string: Convert memset() to C
s390/string: Convert memmove() to C
s390/string: Add -ffreestanding compile option to string.o
s390: Add .noinstr.text to boot and purgatory linker scripts
s390/purgatory: Enforce z10 minimum architecture level
s390: Enable Rust support
s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers
rust: helpers: Add memchr wrapper for string operations
rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts
s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros
s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support
s390/ap: Fix locking issue in SE bind and associate sysfs functions
s390/percpu: Provide arch_this_cpu_write() implementation
s390/percpu: Provide arch_this_cpu_read() implementation
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Replace more deprecated functions by safer counterparts
- Switch Mac NuBus to a dynamic root device
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.2-tag1' of gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Correct CONFIG_MVME16x macro name in #endif comment
m68k: hash: Use lower_16_bits() helper
m68k: defconfig: Update defconfigs for v7.1-rc1
dio: Update DIO_SCMAX comment
dio: Use tabs and avoid continuation logging in dio_init
dio: Replace deprecated strcpy with strscpy in dio_init
nubus: Switch to dynamic root device
zorro: sysfs: Replace sprintf() by sysfs_emit()
|
|
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7fc ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.
A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.
The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.
When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free.
Fixes: 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the s390 specific idle_time_us and idle_count per cpu sysfs
files. They do not provide any additional value. The risk that there
are existing applications which rely on these architecture specific
files should be very low.
However if it turns out such applications exist, this can be easily
reverted.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The former s390 specific arch_cpu_idle_time() implementation was
removed, since its implementation was racy and reported idle time
could go backwards [1].
However this removal was not necessary, since independently of the s390
architecture specific races there exists the iowait counter update race,
which can also lead to reported idle time going backwards [2].
With Frederic Weisbecker's recent cpu idle time accounting refactoring
kernel_cpustat got a sequence counter. Use this to implement s390 specific
variants of kcpustat_field_idle() and kcpustat_field_iowait(). This is
logically a revert of [1] and moves cpu idle time accounting back into s390
architecture code, which is also more precise than the dyntick idle time
accounting by nohz/scheduler.
For comparing cross cpu time stamps it is necessary to use the stcke
instead of the stckf instruction in irq entry path. Furthermore this
open-codes a sequence lock in assembler and C code, which is required to
update the irq entry time stamp to the per cpu idle_data structure in a
race free manner.
[1] commit be76ea614460 ("s390/idle: remove arch_cpu_idle_time() and corresponding code")
[2] commit ead70b752373 ("timers/nohz: Add a comment about broken iowait counter update race")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The upcoming cpu idle time accounting rework involves comparing and
subtracting cross cpu time stamps. Time stamps created with the stckf
instruction monotonic with respect to the local cpu. For cross cpu
monotonic time stamps the slightly slower stcke instruction has to
be used [1].
Convert the idle time accounting relevant usages of stckf to stcke.
[1] Principles of Operation - Setting and Inspecting the Clock
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move union tod_clock type to separate header file. This is preparation
for upcoming changes in order to avoid header dependency problems.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
KVM/riscv changes for 7.2
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v7.2
1. Enable FPU with max VM supported FPU type.
2. Some enhancements about interrupt injection.
3. Some bug fixes and other small changes.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
|
|
s390 needs a fast path for irq injection, and along those lines we
introduce kvm_arch_set_irq_inatomic. Instead of placing all interrupts on
the global work queue as it does today, this patch provides a fast path for
irq injection.
The inatomic fast path cannot lose control since it is running with
interrupts disabled. This meant making the following changes that exist on
the slow path today. First, the adapter_indicators page needs to be mapped
since it is accessed with interrupts disabled, so we added map/unmap
functions. Second, access to shared resources between the fast and slow
paths needed to be changed from mutex and semaphores to spin_lock's.
Finally, the memory allocation on the slow path utilizes GFP_KERNEL_ACCOUNT
but we had to implement the fast path with GFP_ATOMIC allocation. Each of
these enhancements were required to prevent blocking on the fast inject
path.
Fencing of Fast Inject in Secure Execution environments is enabled in the
patch series by not mapping adapter indicator pages. In Secure Execution
environments the path of execution available before this patch is followed.
Statistical counters have been added to enable analysis of irq injection on
the fast path and slow path including io_390_inatomic, io_flic_inject_airq,
io_set_adapter_int and io_390_inatomic_no_inject. The no inject counter
captures adapter masked, coalesced and suppressed interrupts.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-4-freimuth@linux.ibm.com>
|
|
The s390 adapter_indicators_set function can now be optimized to use
long-term mapped pages when available so that work can be
processed on a fast path when interrupts are disabled.
If adapter indicator pages are not mapped then local mapping is
done on a slow path as it is prior to this patch. For example, Secure
Execution environments will take the local mapping path as it does prior to
this patch.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-3-freimuth@linux.ibm.com>
|
|
s390 needs map/unmap ioctls, which map the adapter set
indicator pages, so the pages can be accessed when interrupts are
disabled. The mappings are cleaned up when the guest is removed.
pin_user_pages_remote is used for both the ioctl as well
as the pin-on-demand logic in adapter_indicators_set().
Map/Unmap ioctls are fenced in order to avoid the longterm pinning
in Secure Execution environments. In Secure Execution
environments the path of execution available before this patch is followed.
Statistical counters to count map/unmap functions for adapter indicator
pages are added. The counters can be used to analyze
map/unmap functions in non-Secure Execution environments and similarly
can be used to analyze Secure Execution environments where the counters
will not be incremented as the adapter indicator pages are not mapped.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-2-freimuth@linux.ibm.com>
|
|
kexec_prepare_cpus_wait() calls get_cpu() internally to obtain the
current CPU id. kexec_prepare_cpus() calls kexec_prepare_cpus_wait()
twice -- once for KEXEC_STATE_IRQS_OFF and once for
KEXEC_STATE_REAL_MODE -- but only issues a single put_cpu() at the end,
leaving preempt_count elevated by one extra nesting level.
In practice the imbalance does not trigger a 'scheduling while atomic'
splat because the kexec path is a one-way trip: IRQs are already
disabled, no schedule() occurs after the leak, and
default_machine_kexec() overwrites preempt_count with HARDIRQ_OFFSET
before jumping into kexec_sequence() which never returns. However the
bookkeeping is still wrong.
kexec_prepare_cpus() calls local_irq_disable()/hard_irq_disable()
before invoking kexec_prepare_cpus_wait(), so the CPU is already pinned
and the get_cpu()/put_cpu() preempt_disable() bracketing is unnecessary.
Only the current CPU id is needed, so replace get_cpu() with
raw_smp_processor_id() and drop the now-unneeded put_cpu().
Fixes: 1fc711f7ffb0 ("powerpc/kexec: Fix race in kexec shutdown")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605082912.305100-4-aboorvad@linux.ibm.com
|
|
pnv_kexec_wait_secondaries_down() calls get_cpu() to obtain the current
CPU id but never calls the matching put_cpu(), leaking one
preempt_disable() nesting level on every invocation.
In practice the imbalance does not trigger a visible splat because the
kexec teardown path is a one-way trip: IRQs are already disabled, no
schedule() occurs after the leak, and default_machine_kexec() overwrites
preempt_count with HARDIRQ_OFFSET before jumping into kexec_sequence()
which never returns. However the bookkeeping is still wrong.
The function only needs the current CPU id, and this path runs with
interrupts disabled and the CPU pinned, so the preempt_disable()
side-effect of get_cpu() is unnecessary. Replace it with
raw_smp_processor_id().
Fixes: 298b34d7d578 ("powerpc/powernv: Fix kexec races going back to OPAL")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605082912.305100-3-aboorvad@linux.ibm.com
|
|
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable.
Fixes: a11106544f33 ("powerpc/perf: e500 support")
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605082912.305100-2-aboorvad@linux.ibm.com
|
|
Binutils 2.46 changed the default linker behavior from '-z notext' to
'-z text', which treats dynamic relocations in read-only segments as
errors rather than warnings. This causes the pseries boot wrapper build
to fail with:
/usr/bin/ld.bfd: arch/powerpc/boot/wrapper.a(crt0.o): warning:
relocation against `_platform_stack_top' in read-only section `.text'
/usr/bin/ld.bfd: error: read-only segment has dynamic relocations
The pseries wrapper uses '-pie' to create position-independent code.
However, crt0.S contains a pointer to '_platform_stack_top' in the .text
section, which requires a dynamic relocation at runtime. This creates
DT_TEXTREL (text relocations), which were allowed by default in binutils
2.45 and earlier (via implicit '-z notext') but are now rejected by
binutils 2.46+.
Add '-z notext' linker flag to explicitly allow text relocations for
the pseries platform, similar to what is already done for the epapr
platform. This restores the previous behavior and allows the boot
wrapper to build successfully with binutils 2.46+.
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260525161601.32097-1-amachhiw@linux.ibm.com
|
|
Commit 1cea5180f2f8 ("block: remove pktcdvd driver") left behind some
CONFIG_CONFIG_CDROM_PKTCDVD* references in defconfigs. Remove them.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
A few old machines have not been converted away from the old-style
gpiolib interfaces. Make these select the new CONFIG_GPIOLIB_LEGACY
symbol so the code still works where it is needed but can be left
out otherwise.
This is the list of all gpio_request() calls in mips:
arch/mips/alchemy/devboards/db1000.c: gpio_request(19, "sd0_cd");
arch/mips/alchemy/devboards/db1000.c: gpio_request(20, "sd1_cd");
arch/mips/alchemy/devboards/db1200.c: gpio_request(215, "otg-vbus");
arch/mips/bcm47xx/workarounds.c: err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
arch/mips/bcm63xx/boards/board_bcm963xx.c: gpio_request_one(board.ephy_reset_gpio,
arch/mips/txx9/rbtx4927/setup.c: gpio_request(15, "sio-dtr");
Most of these should be easy enough to change to modern gpio descriptors
or remove if they are no longer in use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After a recent change in binutils that warns when local symbols have
non-default visibility [1], there are a couple instances when building
arch/mips:
Assembler messages:
{standard input}: Warning: local symbol `__memset' has non-default visibility
Assembler messages:
{standard input}: Warning: local symbol `__memcpy' has non-default visibility
Remove the '.hidden' directives for these symbols to clear up the
warnings, as they are pointless with a local symbol, which is by
definition hidden. This results in no changes to these symbols in nm's
output when assembled with various copies of binutils.
Closes: https://lore.kernel.org/20260509122517.GA1108596@ax162/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c4150acbda1b3ce0602f79cbb7700b39e577be7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After commit 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into
MIPS_GENERIC_GETTIMEOFDAY"), building ARCH=mips allnoconfig with LLVM=1
shows some warnings from llvm-readelf while checking the VDSO for
dynamic relocations:
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': invalid PT_DYNAMIC size (0xa4)
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': PT_DYNAMIC dynamic table is invalid: SHT_DYNAMIC will be used
The blamed commit alters the link order of objects into vdso.so.raw,
placing vgettimeofday.o after sigreturn.o. This ultimately results in
the .text section shrinking slightly in size, which in turn changes the
offset of the .dynamic section.
- [ 9] .text PROGBITS 000002f0 0002f0 000930 00 AX 0 0 16
- [10] .dynamic DYNAMIC 00000c20 000c20 000090 08 A 5 0 4
+ [ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
+ [10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
Changing the offset of the .dynamic section causes the dynamic segment
size to grow by the same amount, which triggers a warning in
llvm-readelf because PT_DYNAMIC's p_filesz (0xa4) is no longer a
multiple of its sh_entsize (8):
- DYNAMIC 0x000c20 0x00000c20 0x00000c20 0x00098 0x00098 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
The size of the dynamic segment was already incorrect before the blamed
comment, as it should be 0x90 like the .dynamic section above (18
entries at 8 bytes per entry); it just so happens that 0x98 % 8 is 0,
whereas 0xa4 % 8 is 4, so there was no warning.
Looking at the section to segment mapping of the dynamic segment reveals
that it includes the .got section, as it is implicitly placed after
.dynamic by ld.lld's orphan section heuristics and inherits its segments
from the linker script.
[ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
[10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
[11] .got PROGBITS 00000cb0 000cb0 000008 00 WAp 0 0 16
Section to Segment mapping:
Segment Sections...
00 .mips_abiflags
01 .reginfo
02 .mips_abiflags .reginfo .hash .dynsym .dynstr .gnu.version .gnu.version_d .note .text .dynamic .got
03 .dynamic .got
04 .note
Explicitly describe the .got section in the MIPS VDSO linker script
after .rodata, which switches back to the default text segment,
resulting in a dynamic segment that is the exact size of the .dynamic
section as expected with no other layout changes.
- DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x00090 0x00090 R 0x4
- 03 .dynamic .got
+ 03 .dynamic
Closes: https://github.com/ClangBuiltLinux/linux/issues/2166
Fixes: 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS.
Fixes: 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
CC: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Do not use curly brackets at one source code place
where a single statement should be sufficient.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Single characters should occasionally be put into a sequence.
Thus use the corresponding function “seq_putc”.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch addresses a critical memory management flaw. When
CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer.
Consequently, sizeof(new_mask) evaluates to the pointer size, causing
copy_from_user() to clobber the mask pointer. Furthermore, the old
logic performed copy_from_user() before allocating the mask.
Fix this by allocating new_mask first. To handle variable-sized user
masks correctly, use cpumask_size() to truncate overly large user masks
or pad undersized masks with zeros before copying the data directly into
the allocated buffer.
Fixes: 295cbf6d63165 ("[MIPS] Move FPU affinity code into separate file.")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges.
Fixes: a5718fe8f70f ("MIPS: mm: Drop boot_mem_map")
Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Currently, ath79 SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 32 bytes for
ath79 SoCs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following warning:
$nodename:0: 'wdt@18060008' does not match
'^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 1cea5180f2f8 ("block: remove pktcdvd driver") left behind some
CONFIG_CONFIG_CDROM_PKTCDVD references in defconfigs. Remove them.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CMP support was removed in commit 7fb6f7b0af67 ("MIPS: Remove
deprecated CONFIG_MIPS_CMP"), but a comment referring to it remained in
arch/mips/mm/c-r4k.c. Remove it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86/msr updates from Ingo Molnar:
- Large series to reorganize the rdmsr/wrmsr APIs to remove
32-bit variants and convert to 64-bit variants (Juergen Gross)
- Fix W=1 warning (HyeongJun An)
* tag 'x86-msr-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/msr: Remove wrmsrl()
x86/msr: Switch wrmsrl() users to wrmsrq()
x86/msr: Remove rdmsrl()
x86/msr: Switch rdmsrl() users to rdmsrq()
x86/msr: Remove wrmsr_safe_on_cpu()
x86/msr: Switch wrmsr_safe_on_cpu() users to wrmsrq_safe_on_cpu()
x86/msr: Remove rdmsr_safe_on_cpu()
x86/msr: Switch rdmsr_safe_on_cpu() users to rdmsrq_safe_on_cpu()
x86/msr: Don't use rdmsr_safe_on_cpu() in rdmsrq_safe_on_cpu()
x86/msr: Remove wrmsr_on_cpu()
x86/msr: Switch wrmsr_on_cpu() users to wrmsrq_on_cpu()
x86/msr: Remove rdmsr_on_cpu()
x86/msr: Switch rdmsr_on_cpu() users to rdmsrq_on_cpu()
x86/msr: Remove rdmsrl_on_cpu()
x86/msr: Switch rdmsrl_on_cpu() user to rdmsrq_on_cpu()
x86/process: Convert rdmsr() to rdmsrq() in arch_post_acpi_subsys_init() to address W=1 warning
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Reveal PMU type in fdinfo (Chun-Tse Shao)
Intel CPU PMU driver updates:
- Fix various inaccurate hard-coded event configurations (Dapeng Mi)
Intel uncore PMU driver updates (Zide Chen):
- Fix discovery unit lookup bug for multi-die systems
- Guard against invalid box control address
- Fix PCI device refcount leak in UPI discovery
- Defer ADL global PMON enable to enable_box() to save power
- Fix uncore_die_to_cpu() for offline dies
- Implement global init callback for GNR uncore
AMD CPU PMU driver updates:
- Always use the NMI latency mitigation (Sandipan Das)
AMD uncore PMU driver updates:
- Use Node ID to identify DF and UMC domains (Sandipan Das)"
* tag 'perf-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (22 commits)
perf/x86/amd/uncore: Use Node ID to identify DF and UMC domains
perf: Reveal PMU type in fdinfo
perf/x86/intel/uncore: Implement global init callback for GNR uncore
perf/x86/intel/uncore: Fix uncore_die_to_cpu() for offline dies
perf/x86/intel/uncore: Move die_to_cpu() to uncore.c
perf/x86/intel/uncore: Defer ADL global PMON enable to enable_box()
perf/x86/intel/uncore: Fix PCI device refcount leak in UPI discovery
perf/x86/intel/uncore: Guard against invalid box control address
perf/x86/intel/uncore: Fix discovery unit lookup for multi-die systems
perf/x86/amd/core: Always use the NMI latency mitigation
perf/x86/intel: Update event constraints and cache_extra_regsfor CWF
perf/x86/intel: Update event constraints and cache_extra_regsfor SRF
perf/x86/intel: Update event constraints and cache_extra_regsfor NVL
perf/x86/intel: Update event constraints for PTL
perf/x86/intel: Update event constraints and cache_extra_regsfor ARL
perf/x86/intel: Update event constraints and cache_extra_regsfor LNL
perf/x86/intel: Update event constraints and cache_extra_regsfor MTL
perf/x86/intel: Update event constraints and cache_extra_regsfor ADL
perf/x86/intel: Update event constraints for DMR
perf/x86/intel: Update event constraints and cache_extra_regsfor SPR
...
|
