| Age | Commit message (Collapse) | Author |
|---|
|
The DT bindings don't allow the clock and reset names to be specified
since there is only a single entry for each.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The snps,blen property of stmmac-axi-config nodes needs to have 7
entries in total, with unsupported burst lengths listed as 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
While we trap the guest's attempts to read/write the MPAM control
registers, the hardware continues to use them. Guest-EL0 uses KVM's
user-space's configuration, as the value is left in the register, and
guest-EL1 uses either the host kernel's configuration, or in the case of
VHE, the UNKNOWN reset value of MPAM1_EL1.
We want to force the guest-EL1 to use KVM's user-space's MPAM
configuration. On nVHE rely on MPAM0_EL1 and MPAM1_EL1 always being
programmed the same and on VHE copy MPAM0_EL1 into the guest's
MPAM1_EL1. There is no need to restore as this is out of context once TGE
is set.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
Care must be taken when modifying the PARTID and PMG of a task in any
per-task structure as writing these values may race with the task being
scheduled in, and reading the modified values.
Add helpers to set the task properties, and the CPU default value. These
use WRITE_ONCE() that pairs with the READ_ONCE() in mpam_get_regval() to
avoid causing torn values.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The MPAMSM_EL1 sets the MPAM labels, PMG and PARTID, for loads and stores
generated by a shared SMCU. Disable the traps so the kernel can use it and
set it to the same configuration as the per-EL cpu MPAM configuration.
If an SMCU is not shared with other cpus then it is implementation
defined whether the configuration from MPAMSM_EL1 is used or that from
the appropriate MPAMy_ELx. As we set the same, PMG_D and PARTID_D,
configuration for MPAM0_EL1, MPAM1_EL1 and MPAMSM_EL1 the resulting
configuration is the same regardless.
The range of valid configurations for the PARTID and PMG in MPAMSM_EL1 is
not currently specified in Arm Architectural Reference Manual but the
architect has confirmed that it is intended to be the same as that for the
cpu configuration in the MPAMy_ELx registers.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The MPAM system registers will be lost if the CPU is reset during PSCI's
CPU_SUSPEND.
Add a PM notifier to restore them.
mpam_thread_switch(current) can't be used as this won't make any changes if
the in-memory copy says the register already has the correct value. In
reality the system register is UNKNOWN out of reset.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
Requesters need to populate the MPAM fields for any traffic they send on
the interconnect. For the CPUs these values are taken from the
corresponding MPAMy_ELx register. Each requester may have a limit on the
largest PARTID or PMG value that can be used. The MPAM driver has to
determine the system-wide minimum supported PARTID and PMG values.
To do this, the driver needs to be told what each requestor's limit is.
CPUs are special, but this infrastructure is also needed for the SMMU and
GIC ITS. Call the helper to tell the MPAM driver what the CPUs can do.
The return value can be ignored by the arch code as it runs well before the
MPAM driver starts probing.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: requestor->requester as argued by ispell ]
Signed-off-by: James Morse <james.morse@arm.com>
|
|
In anticipation of MPAM being useful remove the CONFIG_EXPERT restriction.
This was done to prevent the driver being enabled before the user-space
interface was wired up.
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Added second paragraph ]
Signed-off-by: James Morse <james.morse@arm.com>
|
|
Now that the MPAM system registers are expected to have values that change,
reprogram them based on the previous value when a CPU is brought online.
Previously MPAM's 'default PARTID' of 0 was always used for MPAM in
kernel-space as this is the PARTID that hardware guarantees to
reset. Because there are a limited number of PARTID, this value is exposed
to user-space, meaning resctrl changes to the resctrl default group would
also affect kernel threads. Instead, use the task's PARTID value for
kernel work on behalf of user-space too. The default of 0 is kept for both
user-space and kernel-space when MPAM is not enabled.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
MPAM allows traffic in the SoC to be labeled by the OS, these labels are
used to apply policy in caches and bandwidth regulators, and to monitor
traffic in the SoC. The label is made up of a PARTID and PMG value. The x86
equivalent calls these CLOSID and RMID, but they don't map precisely.
MPAM has two CPU system registers that is used to hold the PARTID and PMG
values that traffic generated at each exception level will use. These can
be set per-task by the resctrl file system. (resctrl is the defacto
interface for controlling this stuff).
Add a helper to switch this.
struct task_struct's separate CLOSID and RMID fields are insufficient to
implement resctrl using MPAM, as resctrl can change the PARTID (CLOSID) and
PMG (sort of like the RMID) separately. On x86, the rmid is an independent
number, so a race that writes a mismatched closid and rmid into hardware is
benign. On arm64, the pmg bits extend the partid.
(i.e. partid-5 has a pmg-0 that is not the same as partid-6's pmg-0). In
this case, mismatching the values will 'dirty' a pmg value that resctrl
believes is clean, and is not tracking with its 'limbo' code.
To avoid this, the partid and pmg are always read and written as a
pair. This requires a new u64 field. In struct task_struct there are two
u32, rmid and closid for the x86 case, but as we can't use them here do
something else. Add this new field, mpam_partid_pmg, to struct thread_info
to avoid adding more architecture specific code to struct task_struct.
Always use READ_ONCE()/WRITE_ONCE() when accessing this field.
Resctrl allows a per-cpu 'default' value to be set, this overrides the
values when scheduling a task in the default control-group, which has
PARTID 0. The way 'code data prioritisation' gets emulated means the
register value for the default group needs to be a variable.
The current system register value is kept in a per-cpu variable to avoid
writing to the system register if the value isn't going to change. Writes
to this register may reset the hardware state for regulating bandwidth.
Finally, there is no reason to context switch these registers unless there
is a driver changing the values in struct task_struct. Hide the whole thing
behind a static key. This also allows the driver to disable MPAM in
response to errors reported by hardware. Move the existing static key to
belong to the arch code, as in the future the MPAM driver may become a
loadable module.
All this should depend on whether there is an MPAM driver, hide it behind
CONFIG_ARM64_MPAM.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
CC: Amit Singh Tomar <amitsinght@marvell.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The MPAMSM_EL1 register controls the MPAM labeling for an SMCU, Streaming
Mode Compute Unit. As there is no MPAM support in KVM, make sure MPAMSM_EL1
accesses trigger an UNDEF.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
When KVM enables or disables MPAM traps to EL2 it clears all other bits in
MPAM2_EL2. Notably, it clears the partition ids (PARTIDs) and performance
monitoring groups (PMGs). Avoid changing these bits in anticipation of
adding support for MPAM in the kernel. Otherwise, on a VHE system with the
host running at EL2 where MPAM2_EL2 and MPAM1_EL1 access the same register,
any attempt to use MPAM to monitor or partition resources for kernel space
would be foiled by running a KVM guest. Additionally, MPAM2_EL2.EnMPAMSM is
always set to 0 which causes MPAMSM_EL1 to always trap. Keep EnMPAMSM set
to 1 when not in a guest so that the kernel can use MPAMSM_EL1.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The MPAMSM_EL1 register determines the MPAM configuration for an SMCU. Add
the register definition.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
|
|
Caller of pcibios_align_resource() (__find_resource_space()) already aligns
the start address by 'alignment' so aligning is only necessary if align >
alignment.
Change also to use ALIGN() instead of open-coding.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-8-ilpo.jarvinen@linux.intel.com
|
|
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-7-ilpo.jarvinen@linux.intel.com
|
|
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/20260324165633.4583-6-ilpo.jarvinen@linux.intel.com
|
|
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-5-ilpo.jarvinen@linux.intel.com
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
Add External Memory Controller node to the device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add support for ACTMON on Tegra114. This is used to monitor activity from
different components. Based on the collected statistics, the rate at which
the external memory needs to be clocked can be derived.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When FRED was added to the mainline kernel, it was set up as an explicit
opt-in due to the risk of regressions before hardware was available publicly.
Now, Panther Lake (Core Ultra 300 series) has been released, and benchmarking
by Phoronix has shown that it provides a significant performance benefit on
most workloads:
https://www.phoronix.com/review/intel-fred-panther-lake
Accordingly, enable FRED by default if the CPU supports it. FRED can of
course still be disabled via the fred=off command line option.
Touch up Kconfig help too.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://patch.msgid.link/20260325230151.1898287-2-hpa@zytor.com
|
|
Both smartphones have capacitive buttons but only P895 supports RMI4
function 1A (0D touch), while P880 exposes buttons area as a region of the
touchscreen.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing charger, MUIC and ADC sensor nodes. Reconfigure USB, set one
of the ADC channels as the fuel gauge temperature sensor and add a battery
thermal zone.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add RGB-DSI bridge and panel nodes to LG Optimus 4X and Vu device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Adjust panel node in Tegra Note 7 according to the updated schema.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add SOCTHERM and thermal zones nodes into common Tegra 4 device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When a guest invokes SBI_EXT_PMU_COUNTER_FW_READ or
SBI_EXT_PMU_COUNTER_FW_READ_HI on a firmware counter that has not been
configured via SBI_EXT_PMU_COUNTER_CFG_MATCH, the pmc->event_idx remains
SBI_PMU_EVENT_IDX_INVALID (0xFFFFFFFF). get_event_code() extracts the
lower 16 bits, yielding 0xFFFF (65535), which is then used to index into
kvpmu->fw_event[]. Since fw_event is only RISCV_KVM_MAX_FW_CTRS (32)
entries, this triggers an array-index-out-of-bounds:
UBSAN: array-index-out-of-bounds in arch/riscv/kvm/vcpu_pmu.c:255:37
index 65535 is out of range for type 'kvm_fw_event [32]'
Add a check for the known unconfigured case (SBI_PMU_EVENT_IDX_INVALID)
and a WARN_ONCE guard for any unexpected out-of-bounds event codes,
returning -EINVAL in both cases.
Fixes: badc386869e2c ("RISC-V: KVM: Support firmware events")
Fixes: 08fb07d6dcf71 ("RISC-V: KVM: Support 64 bit firmware counters on RV32")
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260316014533.2312254-2-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The macros are easier to read when the values are sorted numerically.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://patch.msgid.link/20260327141513.1250499-3-linux@rasmusvillemoes.dk
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Currently, there's a mix of spaces and tabs used for aligning the
bodies of the macros, even within the same block. Use tabs throughout
for consistency.
No functional change; 'git diff -w' produces no output.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://patch.msgid.link/20260327141513.1250499-2-linux@rasmusvillemoes.dk
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
When attach to PC Type-A port, the USB device controller does not function
at all. Because it is configured as source-only and a Type-A port doesn't
support PD capability, a data role swap is impossible.
Actually, PTN5110THQ is configured for Source role only at POR, but after
POR it can operate as a DRP (Dual-Role Power). By switching the power-role
to dual, the port can operate as a sink and enter device mode when attach
to Type-A port.
Since the board design uses EN_SRC to control the 5V VBUS path and EN_SNK
to control the 12V VBUS output, to avoid outputting a higher VBUS when in
sink role, we set the operation current limit to 0mA so that SW will not
control EN_SNK at all.
Fixes: 2faf4ebcee2e5 ("arm64: dts: freescale: imx8qxp-mek: enable cadence usb3")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
When attach to PC Type-A port, the USB device controller does not function
at all. Because it is configured as source-only and a Type-A port doesn't
support PD capability, a data role swap is impossible.
Actually, PTN5110THQ is configured for Source role only at POR, but after
POR it can operate as a DRP (Dual-Role Power). By switching the power-role
to dual, the port can operate as a sink and enter device mode when attach
to Type-A port.
Since the board design uses EN_SRC to control the 5V VBUS path and EN_SNK
to control the 12V VBUS output, to avoid outputting a higher VBUS when in
sink role, we set the operation current limit to 0mA so that SW will not
control EN_SNK at all.
Fixes: b237975b2cd58 ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
LX2162A Clearfog has four LEDs attached physically to the 4-port SFP
connector. They are intended to show information relating to network
interface status.
Select "netdev" as default trigger for each LED, and link each one to
the respective dpmac instance as trigger-source.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add aliases for crypto accelerator and rtc0 ensuring that on-SoM RTC and
the SoC A72 domain crypto accelerator are assigned first index.
Further set model and compatible strings which are informative but
overridden by actual boards.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add alias for rtc0 ensuring that on-COM RTC is assigned first index.
Note that fsl-lx2160a.dtsi already defines an alias for rtc1 which
implicitly achieved the same result.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Commit 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to
support bus recovery") introduced pinmux nodes for lx2160 i2c
interfaces, allowing runtime change between i2c and gpio functions
implementing bus recovery.
However, the dynamic configuration area (overwrite MUX) used by the
pinctrl-single driver initially reads as zero and does not reflect the
actual hardware state set by the Reset Configuration Word (RCW) at
power-on.
Because multiple groups of pins are configured from a single 32-bit
register, the first write from the pinctrl driver unintentionally clears
all other bits to zero.
Add description for all bits of RCWSR12 register, allowing boards to
explicitly define and restore their intended hardware state.
This includes i2c, gpio, flextimer, spi, can and sdhc functions.
Other configuration words, i.e. RCWSR13 & RCWSR14 may be added in the
future for boards setting non-zero values there.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Replace some stray zeros from decimal to hexadecimal format within
pinmux nodes.
No functional change intended.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
LX2160A pinmux is done in groups by various length bitfields within
configuration registers.
In particular i2c sda/scl pins are always configured together. Therefore
bus recovery may control both sda and scl.
When pinmux nodes and bus recovery was enabled originally for LX2160,
only the scl-gpios were added to the i2c controller nodes.
Add references to sda-gpios for each i2c controller.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
LX2160A pinmux is done in groups by various length bitfields within
configuration registers.
Each group of pins is named in the reference manual after a primary
function using soc-specific naming, e.g. IIC1 (for i2c0).
Hardware block numbering starts from zero in device-tree but one in the
reference manual.
Rename the already defined pinmux nodes originally added for changing
i2c pins between i2c and gpio functions reflecting the reference manual
name (IIC) in the node name, and the device-tree name (i2c, gpio) in the
label.
Specifically, drop the "_scl" suffix from the I2C labels because the
nodes actually configure both SDA and SCL pins together. Instead add
"_pins" suffix to avoid conflicts with I2C controller labels.
For GPIO functions, include the specific controller and pin numbers in
the label to clarify they are generic GPIOs and help spot mistakes.
No functional change intended.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
LX2160A pinmux is done in groups by various length bitfields within
configuration registers.
The pinmux nodes i2c7-scl-pins and i2c7-scl-gpio-pins are duplicates of
i2c6-scl-gpio and i2c6-scl-gpio-pins, writing to the same register and
bits.
These two i2c buses i2c6/i2c7 (IIC7/IIC8) are configured together in
register RCWSR13 bits 3-0.
Drop the duplicate node name and change references to the i2c6 node.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
LX2160A pinmux is done in groups by various length bitfields within
configuration registers.
The first i2c bus (called IIC1 in reference manual) is configured through
field IIC1_PMUX in register RCWSR14 bit 10 which is described in the
reference manual as a single bit, unlike the other i2c buses.
Change the bitmask for the pinmux nodes from 0x7 to 0x1 to ensure only
single bit is modified.
Further change the zero in the same line to hexadecimal format for
consistency.
Align with documentation by avoiding writes to reserved bits. No functional
change, as writing the extra two reserved bits is not known to cause
issues.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Commit 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to
support bus recovery") introduced pinmux nodes for lx2160 i2c
interfaces, allowing runtime change between i2c and gpio functions
implementing bus recovery.
However, the dynamic configuration area (overwrite MUX) used by the
pinctrl-single driver initially reads as zero and does not reflect the
actual hardware state set by the Reset Configuration Word (RCW) at
power-on.
Because multiple groups of pins are configured from a single 32-bit
register, the first write from the pinctrl driver unintentionally clears
all other bits to zero.
For example, on the LX2162A Clearfog, RCWSR12 is initialized to
0x08000006. When any i2c pinmux is applied, it clears all other fields.
This inadvertently disables SD card-detect (IIC2_PMUX) and some GPIOs
(SDHC1_DIR_PMUX):
LX2162-CF RCWSR12: 0b0000100000000000 0000000000000110
IIC2_PMUX ||| ||| || | ||| |||XXX : I2C/GPIO/CD-WP
SDHC1_DIR_PMUX XXX ||| || | ||| ||| : SDHC/GPIO/SPI
Reverting the commit in question was considered but bus recovery is an
important feature.
Instead add pinmux nodes for those pins that were unintentionally
reconfigured on SolidRun LX2160A Clearfog-CX and LX2162A Clearfog
boards.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
property
Add typec-power-opmode property to avoid dtbs_check warning.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Armbian installs DT overlays using dtbs_install. For it to work all
the overlays have to be added to dtb-y explicitly.
Add the overlays for platforms supported by Armbian.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
MIPI DSI to HDMI bridge ADV7535 CEC default register address is 0x3c
on an I2C bus. And, OV5640 camera uses the same address on the same
I2C bus. To resolve this conflict, use 0x3b as ADV7535 CEC register
address by specifying all ADV7535 register addresses.
Fixes: 6f6c18cba16f ("arm64: dts: imx8mp-evk: add camera ov5640 and related nodes")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The sound card wm8960-2 and wm8960-3 only support capture mode for the
reason of connection on the EVK board. But fsl-asoc-card don't support
capture_only setting, the sound card creation will fail.
fsl-sai 59060000.sai: Missing dma channel for stream: 0
fsl-sai 59060000.sai: ASoC error (-22): at snd_soc_pcm_component_new() on 59060000.sai
fsl-sai 59070000.sai: Missing dma channel for stream: 0
fsl-sai 59070000.sai: ASoC error (-22): at snd_soc_pcm_component_new() on 59070000.sai
so switch to use audio-graph-card2 which supports 'capture_only'
property for wm8960-2 and wm8960-3 cards.
Fixes: b41c45eb990a ("arm64: dts: imx8dxl-evk: add audio nodes")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add PF09 and PF53 thermal nodes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add pwm fan node and use it for A55 cooling.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add nxp,ctrl-ids for scmi_misc to support wakeup from the peripherals.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add A55 and ANA thermal including cooling-maps.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
