| Age | Commit message (Collapse) | Author |
|---|
|
Flatten usb controller nodes and update to using latest bindings and
flattened driver approach.
Tested this patch on CRD platform. For testing purpose, modified dr_mode
property and added usb-role-switch property to the 3 super speed capable
DRD controllers and valdiated both host and device mode. Also validated
host mode on the multiport controller.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323103119.1801139-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SD Card host controller for purwa iot evk board.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323110017.2527956-1-sarthak.garg@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The pinctrl nodes from sm6350.dtsi already contain a bias-* property, so
that needs to be deleted, otherwise the dtb will contain two conflicting
bias-* properties.
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/r/20260310-maritime-silly-05e7b7e03aa6@spud/
Fixes: c4ef464b24c5 ("arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260319-fp4-uart1-fix-v1-1-f6b3fedef583@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Monaco-evk has LT8713sx which act as DP to 3 DP output
converter. Edp PHY from monaco soc is connected to lt8713sx
as input and output of lt8713sx is connected to 3 mini DP ports.
Two ports are available in mainboard and one port
is available on Mezz board.
lt8713sx is connected to soc over i2c0 and with reset gpio
connected to pin6 of ioexpander5.
Enable the edp nodes from monaco and enable lontium lt8713sx
bridge node.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260319-lt8713sx-bridge-linux-for-next-v4-1-da886ec78fe3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the LPASS LPI pinctrl found on the Milos SoC and define a
few pinctrl states that will be used in the future.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260306-milos-pinctrl-lpi-v1-4-086946dbb855@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the bluetooth interface on the uart6
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260120-akatsuki-uart-v2-2-867ee7f042d0@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Change the uart instances:
- uart6 is for bluetooth
- uart9 is for serial console (available on the uSD pinout)
Most OSes assume serial0 is for console UART. Bluetooth interface uses
UART interface. uart6 is standard debug console and uart9 bluetooth on
SDM845 devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Link: https://lore.kernel.org/r/20260120-akatsuki-uart-v2-1-867ee7f042d0@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The alert-slider is a tri-state sound profile switch found on the
OnePlus 6, Android maps the states to "silent", "vibrate" and "ring".
Expose them as ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct ones.
Co-developed-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20251113-op6-tri-state-v8-2-54073f3874bc@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On CRD, the keyboard, trackpad and touchscreen are connected over I2C
and all share a 3.3V regulator.
So describe the regulator and each input device along with their
pinctrl states.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260320-glymur-dts-crd-enable-kbd-tp-ts-v6-1-626d008534d9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the MDSS (Mobile Display SubSystem), the third DisplayPort
controller, and its PHY to drive the onboard eDP panel on the Glymur
CRD platform. Also describe the regulator supplying panel power.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-2-ca415560447e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The MDSS (Mobile Display SubSystem) on Glymur provides four DisplayPort
controllers. Describe them together with the display controller and eDP
PHY. Also add the combo PHY link and vco_div clocks to the display clock
controller, and connect the PHYs and DP endpoints in the graph.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-1-ca415560447e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm Glymur Compute Reference Device comes with two Type-C ports,
one USB Type-A port, and a fingerprint reader connected over USB. Each
Type-C port is connected to one USB combo PHY and one M31 eUSB2 PHY. The
Type-A port is connected to the USB multi-port controller through one M31
eUSB2 PHY and one USB3 UNI PHY. The fingerprint reader is connected to the
USB_2 controller.
All M31 eUSB2 PHYs have associated eUSB2-to-USB 2.0 repeaters, which are
either integrated in SMB2370 PMICs or provided by dedicated NXP PTN3222
devices.
Enable all required controllers, PHYs, and repeaters, while specifying
their supplies. Also describe the PMIC GLINK graph for the Type-C
connectors.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-2-ba367eda6010@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Glymur USB subsystem contains three USB 3.2 Gen 2 controllers,
one USB 3.2 multi-port controller, and one USB 2.0-only controller.
This includes five SS USB QMP PHYs (three combo and two UNI) and six M31
eUSB2 PHYs.
All controllers are based on SNPS DWC3, so describe them as Qualcomm
flattened DWC3 nodes.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-1-ba367eda6010@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the CPU BWMON nodes for glymur SoCs.
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Pragnesh Papaniya <pragnesh.papaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260302-glymur_bwmon_dt-v1-1-f4939d75bd47@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable MDSS/DPU/DSI0 and add Novatek NT37801 panel on Kaanapali MTP
board.
NT37801 Spec V1.0 chapter "5.7.1 Power On Sequence" states VDDI ranges
1.65V~1.95V, but ldo12 ranges 1.2V~1.8V, so change ldo12 range to
1.65V~1.8V.
pmh0110_d_e0_gpios and pmh0110_f_e0_gpios are configured for
level shifters. Kaanapali need configure these pinctrl for panel
function.
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-6-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add MDSS/MDP/DSI controllers and DSI PHYs for Kaanapali. DP controllers
are not included.
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-5-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable bluetooth WCN785x and Wi-Fi on Kaanapali MTP board.
Co-developed-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-4-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Include PMIC files used on Kaanapali QRD boards. Add configurations for
keys (volume up and volume down), RGB LEDs and flash LEDs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-3-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Include PMIC files used on Kaanapali MTP boards. Add configurations for
keys (volume up and volume down), RGB LEDs and flash LEDs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-2-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a spmi-pmic-arb device for the SPMI PMIC arbiter found on Kaanapali.
It has two subnodes corresponding to the SPMI0 bus controller and the
SPMI1 bus controller.
Also add dtsi files for PMH0104, PMH0110, PMD8028, PMIH0108, PMR735D
and PM8010 along with temp-alarm and GPIO nodes under them, which are
needed on Kaanapali.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-1-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the device nodes for the multimedia clock controllers (cambistmclkcc,
camcc, dispcc, videocc, gpucc and gxclkctl).
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-9-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for audio on the Kaanapali MTP platform by introducing device
tree nodes for WSA8845 smart speaker amplifier for playback, DMIC
microphone for capture, and sound card routing. The WCD9395 codec is add
to supply MIC-BIAS, for enabling onboard microphone capture.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-8-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ADSP and CDSP on Kaanapali QRD board.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-7-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ADSP and CDSP on Kaanapali MTP board.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-6-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce audio support for Kaanapali SoC by adding LPASS macro codecs,
TLMM pin controller and SoundWire controller with similar hardware
implementation to SM8750 platform. Also add GPR (Generic Pack Router) node
along with support for APM (Audio Process Manager) and PRM
(Proxy Resource Manager) audio services.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-5-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add remoteproc PAS loader for ADSP and CDSP with its SMP2P and fastrpc
nodes.
Co-developed-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com>
Signed-off-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-4-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Kaanapali includes seven TSENS instances, with a total of 55 thermal
sensors distributed across various locations on the SoC.
The TSENS max/reset threshold is configured to 130°C in the hardware.
Enable all TSENS instances, and define the thermal zones with a hot trip
at 120°C and critical trip at 125°C.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-3-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree support for QUPv3 serial engine protocols on Kaanapali.
Kaanapali has 24 QUP serial engines across 4 QUP wrappers, each with
support of GPI DMA engines, and it also includes 5 I2C hubs.
Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-2-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add CoreSight nodes to enable trace paths such as TPDM->ETF and STM->ETF.
These devices are part of the AOSS, CDSP, QDSS, modem and some small
subsystems, such as DCC, GCC, ipcc and so on.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-1-79d20dab8a60@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable UFS for HAMOA-IOT-EVK board.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260211132926.3716716-4-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add UFS host controller and PHY nodes for x1e80100 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260211132926.3716716-3-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree support for the Arduino VENTUNO Q board,
based on the Qualcomm QCS8300 (Monaco) SoC.
The board features a Qualcomm Monza SoM and integrates various
peripherals, including:
- USB Type‑C connector with dual‑role support
- ADV7535 DSI‑to‑HDMI bridge
- MAX98091 audio codec
- 2.5G Ethernet PHY (HSGMII)
- PCIe0 (to onboard WiFi chipset and USB bridge)
- PCIe1 (to M2/nvme)
- Button (via GPIO‑keys)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Monaco Monza SoM is a compact computing module that integrates a
Monaco/QCS8300 System on Chip (SoC), along with essential components
optimized for IoT applications. It is designed to be mounted on
carrier boards, enabling the development of complete embedded systems.
The following components are described:
- Fixed S2S 1.8V rail
- PMM8654AU RPMh regulators (PMIC A and PMIC C)
- Display subsystem/phy supplies (DSI, DP)
- Enable GPU, GPI DMA, IRIS
- PCIe Gen4 for both controllers and PHY supply hookups
- QUPv3 firmware declarations
- REFGEN always-on workaround for USB2 HS PHY
- Remoteproc firmware names for ADSP, CDSP and GPDSP
- Ethernet SERDES supplies
- USB HS/SS PHY regulators
- On-SoM eMMC
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add LPASS LPI pinctrl node used for setting MI2S and soundwire pin
configs.
Co-developed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing usb-role-switch property to usb controller node.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a port node exposing the High‑Speed and Super‑Speed endpoints,
allowing the USB controller to be linked through the device‑tree
graph.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an initial device tree for Wiko PULP 4G.
Includes support for:
- UART
- USB (no OTG)
- Internal storage
- MicroSD
- Volume keys + Power button
- Touchscreen
- Backlight
- Accelerometer: Invensense MPU6880
- Magnetometer: Asahi Kasei AK09911
- Hall sensor: Rohm BU52021HFV
- Proximity sensor
- Vibrator
- Earpiece
- Microphone 1
- Headphones
- Wifi
- Bluetooth
- GPU
Signed-off-by: Paul Adam <adamp@posteo.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-wiko-chuppito-v5-3-0a8656cca1b3@posteo.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
PCIe switch node for PCIe1
Add a node for the second TC9563 PCIe switch on PCIe1, which is connected
in cascade to the first TC9563 switch via the former's downstream port.
Two embedded Ethernet devices are present on one of the downstream
ports of this second switch as well. All the ports present in the
node represent the downstream ports and embedded endpoints.
The second TC9563 is powered up via the same LDO regulators as the first
one, and these can be controlled via two GPIOs, which are already present
as fixed regulators. This TC9563 can also be configured through I2C.
Signed-off-by: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-industrial-mezzanine-pcie-v5-2-1358978517fe@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
switch node for PCIe0
Add a node for the TC9563 PCIe switch connected to PCIe0. The switch
has three downstream ports.Two embedded Ethernet devices are present
on one of the downstream ports. The other downstream ports route to
M.2 E key and PCIe x4 connector respectively. All the ports present
in the node represent the downstream ports and embedded endpoints.
Power to the TC9563 is supplied through two LDO regulators, which
are on by default and are added as fixed regulators. TC9563 can be
configured through I2C.
Since PCIe0 now routes to TC9563 instead of WCN6750, disable the
WCN6750 and WPSS device tree nodes to reflect the actual hardware
configuration and avoid probing issues.
Signed-off-by: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-industrial-mezzanine-pcie-v5-1-1358978517fe@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The restriction on UHS-I speed modes was added to all SM8650 platforms
by copying it from SM8450 and SM8550 dtsi files, and it was an actually
reproducible problem due to the overclocking of SD cards. Since the latter
issue has been fixed in the SM8650 GCC driver, UHS-I speed modes are
working fine on SM8650 boards, below is the test performed on SM8650-HDK:
SDR50 speed mode:
mmc0: new UHS-I speed SDR50 SDHC card at address 0001
mmcblk0: mmc0:0001 00000 14.6 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 24.8086 s, 43.3 MB/s
SDR104 speed mode:
mmc0: new UHS-I speed SDR104 SDHC card at address 59b4
mmcblk0: mmc0:59b4 USDU1 28.3 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.9448 s, 82.9 MB/s
Unset the UHS-I speed mode restrictions from the SM8550 platform dtsi
file, there is no indication that the SDHC controller is broken.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The restriction on UHS-I speed modes was added to all SM8550 platforms
by copying it from SM8450 dtsi file, and due to the overclocking of SD
cards it was an actually reproducible problem. Since the latter issue
has been fixed, UHS-I speed modes are working fine on SM8550 boards,
below is the test performed on SM8550-HDK:
SDR50 speed mode:
mmc0: new UHS-I speed SDR50 SDHC card at address 0001
mmcblk0: mmc0:0001 00000 14.6 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 23.5468 s, 45.6 MB/s
SDR104 speed mode:
mmc0: new UHS-I speed SDR104 SDHC card at address 59b4
mmcblk0: mmc0:59b4 USDU1 28.3 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 11.9819 s, 89.6 MB/s
Unset the UHS-I speed mode restrictions from the SM8550 platform dtsi
file, there is no indication that the SDHC controller is broken.
Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The reported problem of some non-working UHS-I speed modes on SM8450
originates in commit 0a631a36f724 ("arm64: dts: qcom: Add device tree
for Sony Xperia 1 IV"), and then it was spread to all SM8450 powered
platforms by commit 9d561dc4e5cc ("arm64: dts: qcom: sm8450: disable
SDHCI SDR104/SDR50 on all boards").
The tests show that the rootcause of the problem was related to an
overclocking of SD cards, and it's fixed later on by commit a27ac3806b0a
("clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs").
Since then both SDR50 and SDR104 speed modes are working fine on SM8450,
tested on SM8450-HDK:
SDR50 speed mode:
mmc0: new UHS-I speed SDR50 SDHC card at address 0001
mmcblk0: mmc0:0001 00000 14.6 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 24.6254 s, 43.6 MB/s
SDR104 speed mode:
mmc0: new UHS-I speed SDR104 SDHC card at address 59b4
mmcblk0: mmc0:59b4 USDU1 28.3 GiB
mmcblk0: p1
% dd if=/dev/mmcblk0p1 of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.3266 s, 87.1 MB/s
Remove the restrictions on SD card speed modes from the SM8450 platform
dtsi file and enable UHS-I speed modes.
Fixes: 9d561dc4e5cc ("arm64: dts: qcom: sm8450: disable SDHCI SDR104/SDR50 on all boards")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The expected frequency of SD host controller core supply clock is 19.2MHz,
while RPMH_CXO_CLK clock frequency on SM8650 platform is 38.4MHz.
Apparently the overclocked supply clock could be good enough on some
boards and even with the most of SD cards, however some low-end UHS-I
SD cards in SDR104 mode of the host controller produce I/O errors in
runtime, fortunately this problem is gone, if the "xo" clock frequency
matches the expected 19.2MHz clock rate.
Fixes: ffb21c1e19b1 ("arm64: dts: qcom: x1e80100: Describe the SDHC controllers")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The expected frequency of SD host controller core supply clock is 19.2MHz,
while RPMH_CXO_CLK clock frequency on SM8650 platform is 38.4MHz.
Apparently the overclocked supply clock could be good enough on some
boards and even with the most of SD cards, however some low-end UHS-I
SD cards in SDR104 mode of the host controller produce I/O errors in
runtime, fortunately this problem is gone, if the "xo" clock frequency
matches the expected 19.2MHz clock rate.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The expected frequency of SD host controller core supply clock is 19.2MHz,
while RPMH_CXO_CLK clock frequency on SM8650 platform is 38.4MHz.
Apparently the overclocked supply clock could be good enough on some
boards and even with the most of SD cards, however some low-end UHS-I
SD cards in SDR104 mode of the host controller produce I/O errors in
runtime, fortunately this problem is gone, if the "xo" clock frequency
matches the expected 19.2MHz clock rate.
Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20260314023715.357512-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the GITS_SGIR register is cut off. Fix it up.
Fixes: 068c3d3c83be ("arm64: dts: qcom: Add base SM8750 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-6-49be8076adb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the GITS_SGIR register is cut off. Fix it up.
Fixes: d2350377997f ("arm64: dts: qcom: add initial SM8650 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-5-49be8076adb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the GITS_SGIR register is cut off. Fix it up.
Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-4-49be8076adb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the GITS_SGIR register is cut off. Fix it up.
Fixes: fc8b0b9b630d ("arm64: dts: qcom: sm8450 add ITS device tree node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-3-49be8076adb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the GITS_SGIR register is cut off. Fix it up.
Fixes: d9d59d105f98 ("arm64: dts: qcom: Add initial Milos dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-topic-its_range_fixup-v1-2-49be8076adb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
