summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2026-02-24arm64: dts: imx93-tqma9352: improve eMMC pad configurationMarkus Niebel
Use DSE x4 an PullUp for CMD an DAT, DSE x4 and PullDown for CLK to improve stability and detection at low temperatures under -25°C. Fixes: 0b5fdfaa8e45 ("arm64: dts: freescale: imx93-tqma9352: set SION for cmd and data pad of USDHC") Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx91-tqma9131: improve eMMC pad configurationMarkus Niebel
Use DSE x4 an PullUp for CMD an DAT, DSE x4 and PullDown for CLK to improve stability and detection at low temperatures under -25°C. Fixes: e71db39f0c7c ("arm64: dts: freescale: add initial device tree for TQMa91xx/MBa91xxCA") Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93-11x11-evk: change usdhc tuning step for eMMC and SDLuke Wang
During system resume, the following errors occurred: [ 430.638625] mmc1: error -84 writing Cache Enable bit [ 430.643618] mmc1: error -84 doing runtime resume For eMMC and SD, there are two tuning pass windows and the gap between those two windows may only have one cell. If tuning step > 1, the gap may just be skipped and host assumes those two windows as a continuous windows. This will cause a wrong delay cell near the gap to be selected. Set the tuning step to 1 to avoid selecting the wrong delay cell. For SDIO, the gap is sufficiently large, so the default tuning step does not cause this issue. Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support") Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx91-11x11-evk: change usdhc tuning step for eMMC and SDLuke Wang
During system resume, the following errors occurred: [ 430.638625] mmc1: error -84 writing Cache Enable bit [ 430.643618] mmc1: error -84 doing runtime resume For eMMC and SD, there are two tuning pass windows and the gap between those two windows may only have one cell. If tuning step > 1, the gap may just be skipped and host assumes those two windows as a continuous windows. This will cause a wrong delay cell near the gap to be selected. Set the tuning step to 1 to avoid selecting the wrong delay cell. For SDIO, the gap is sufficiently large, so the default tuning step does not cause this issue. Fixes: 6772c4cffd87 ("arm64: dts: freescale: add i.MX91 11x11 EVK basic support") Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx95-evk: update the dma-channel-mask propertyJoy Zou
Have reserved eDMA2 channels 0 and 1 for V2X fast hash in imx95.dtsi. So update the dma-channel-mask from 0xc0000000 to 0xc0000003 to mark channels 0, 1, 30, and 31 as reserved. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx95: Reserve eDMA channels 0-1 for V2XJoy Zou
Reserve eDMA channels 0 and 1 on the AXI eDMA controller for exclusive use by V2X (Vehicle-to-Everything) fast hash operations. Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Tested-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93: Add i.MX93 Wireless EVK board supportSherry Sun
i.MX93 Wireless SiP is created by integrating i.MX93 and IW610 WLCSP (Wi-Fi + BLE + 802.15.4). And i.MX93 Wireless EVK board with the i.MX93 Wireless SiP basically reuse the i.MX93 11x11 EVK board, with some minor functional and pin connection differences. Reuse the new imx93-11x11-evk-common.dtsi and add the board-specific changes here. Here are the detailed differences between i.MX93 Wireless EVK and i.MX93 11x11 EVK board. Function differences: Function i.MX93W EVK i.MX93 EVK WIFI/BT IW610 in i.MX93W IW612 M.2 module MQS N Y PDM MIC N Y M.2 N Y RPi 40-pin HDR Limited support(pin conflict) Y Pin connection differences: Function Signal name i.MX93W EVK i.MX93 EVK WIFI/BT SPI_FRM SAI1_TXFS (spi1.PCS0) GPIO_IO08 (spi3.PCS0) SPI_TXD SAI1_TXC (spi1.SIN) GPIO_IO09 (spi3.SIN) SPI_RXD SAI1_RXD0 (spi1.SOUT) GPIO_IO10 (spi3.SOUT) SPI_CLK SAI1_TXD0 (spi1.SCK) GPIO_IO11 (spi3.SCK) SPI_INT CCM_CLKO1 on-board IO expander NB_WAKE_IN PDM_CLK on-module IO expander WL_WAKE_IN PDM_BIT_STREAM0 on-module IO expander IND_RST_WL PDM_BIT_STREAM1 on-module IO expander IND_RST_NB GPIO_IO28 on-module IO expander PDn GPIO_IO29 on-module IO expander NB_WAKE_OUT GPIO_IO14 on-board IO expander WL_WAKE_OUT GPIO_IO15 CCM_CLKO1 I2C3 I2C3_SDA GPIO_IO00 GPIO_IO28 I2C3_SCL GPIO_IO01 GPIO_IO29 Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93: Add imx93w.dtsi for i.MX93 Wireless SiPSherry Sun
Introduce imx93w.dtsi to describe the new NXP i.MX93 Wireless SiP, which integrates the i.MX93 application processor with the NXP IW610 WLCSP (Wi-Fi + Bluetooth LE + 802.15.4) connectivity device. The new imx93w.dtsi is based on imx93.dtsi and adds the pieces required for the internal connection between i.MX93 and IW610 inside the SiP. This includes USDHC3 which is used as the host interface to the IW610 and the required GPIO settings(e.g. WL_RST, WL_REG_ON, etc.). These nodes reflect internal SiP wiring and are not board specific, so they are placed in a dedicated imx93w.dtsi file that can be reused by multiple boards adopting the i.MX93 Wireless SiP. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93: Move 11x11 EVK specific parts back to imx93-11x11-evk.dtsSherry Sun
The previous patch renamed imx93-11x11-evk.dts to imx93-11x11-evk-common.dtsi to prepare for adding the i.MX93 Wireless EVK, which shares most of its design with the 11x11 EVK. Move the board specific differences out of imx93-11x11-evk-common.dtsi and back into imx93-11x11-evk.dts, ensuring that the common dtsi only contains the truly shared parts between the two EVK boards. No functional changes intended. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93: Extract common EVK description into shared dtsiSherry Sun
The i.MX93 Wireless EVK reuses most of the 11x11 EVK design. To avoid duplication and DTS-to-DTS includes, extract the common parts into a new imx93-11x11-evk-common.dtsi shared by both boards. Rename imx93-11x11-evk.dts to imx93-11x11-evk-common.dtsi and include it from imx93-11x11-evk.dts. Only structural changes are introduced, with no intended functional impact. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93-9x9-qsb: change usdhc tuning step for eMMC and SDLuke Wang
During system resume, the following errors occurred: [ 430.638625] mmc1: error -84 writing Cache Enable bit [ 430.643618] mmc1: error -84 doing runtime resume For eMMC and SD, there are two tuning pass windows and the gap between those two windows may only have one cell. If tuning step > 1, the gap may just be skipped and host assumes those two windows as a continuous windows. This will cause a wrong delay cell near the gap to be selected. Set the tuning step to 1 to avoid selecting the wrong delay cell. For SDIO, the gap is sufficiently large, so the default tuning step does not cause this issue. Fixes: 0565d20cd8c2 ("arm64: dts: freescale: Support i.MX93 9x9 Quick Start Board") Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx95-15x15-frdm: support AONMIX MQSLaurentiu Mihalcea
Add support for AONMIX MQS (i.e. MQS1). Reviewed-by: Chancel Liu <chancel.liu@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx95: add AONMIX MQS nodeLaurentiu Mihalcea
Add DT node for AONMIX MQS (i.e. MQS1). Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: freescale: imx95-toradex-smarc: fix PMIC_SD2_VSEL label positionEmanuele Ghidoli
Fix the PMIC_SD2_VSEL gpio-line-name position. It should be on line 19 of gpio3, not line 20. Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24ARM: dts: imx51-babbage: rename at45db321d@1 to flash@1Frank Li
Rename at45db321d@1 to flash@1 to fix below CHECK_DTBS warnings: at45db321d@1 (atmel,at45db321d): $nodename:0: 'at45db321d@1' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/atmel,dataflash.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24ARM: dts: imx51-ts4800: rename fpga@0 to fpga@0,0Frank Li
Change node name fpga@0 to fpga@0,0 to fix below CHECK_DTBS warnings: memory-controller@83fda000 (fsl,imx51-weim): 'fpga@0' does not match any of the regexes: '^.*@[0-7],[0-9a-f]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yam Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24ARM: dts: imx35: remove simple-bus 'usbphy'Frank Li
Remove simple bus 'usbphy' and move chip nodes to up layers to fix below CHECK_DTBS warnings. arch/arm/boot/dts/nxp/imx/imx35-pdk.dtb: usbphy (simple-bus): usb-phy@1:reg:0: [1] is too short from schema $id: http://devicetree.org/schemas/simple-bus.yaml Remove property 'reg' because it is never used at driver. Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24ARM: dts: imx35: rename i2c clock-names to ipgFrank Li
Rename the i2c clock-names from "ipg_per" to "ipg" to match the binding documentation. Fix the following CHECK_DTBS warning: i2c@43f80000 (fsl,imx35-i2c): clock-names:0: 'ipg' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24ARM: dts: imx35: rename emi to emi-bus to fix CHECK_DTBS warningFrank Li
Rename emi to emi-bus to fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/imx/imx31-bug.dtb: emi@b8000000 (simple-bus): $nodename:0: 'emi@b8000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx8mq: Set the correct gpu_ahb clock frequencySebastian Krzyszkowiak
According to i.MX 8M Quad Reference Manual, GPU_AHB_CLK_ROOT's maximum frequency is 400MHz. Fixes: 45d2c84eb3a2 ("arm64: dts: imx8mq: add GPU node") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24s390/bpf: Do not increment tailcall count when prog is NULLIlya Leoshkevich
Currently tail calling a non-existent prog results in tailcall count increment. This is what the interpreter is doing, but this is clearly wrong, so replace load-and-increment and compare-and-jump with load and compare-and-jump, conditionally followed by increment and store. Reported-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20260217161058.101346-1-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-02-24x86/hyperv: print out reserved vectors in hexadecimalWei Liu
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-24arm64: dts: imx8-apalis: Fix LEDs name collisionFrancesco Dolcini
Ixora boards have multiple instances of status leds, to avoid a name collision add the function-enumerator property. This fixes the following Linux kernel warnings: leds-gpio leds: Led green:status renamed to green:status_1 due to name collision leds-gpio leds: Led red:status renamed to red:status_1 due to name collision Fixes: c083131c9021 ("arm64: dts: freescale: add apalis imx8 aka quadmax carrier board support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx8-apalis: Remove obsolete TODO commentFrancesco Dolcini
The GPU is supported since Linux v6.9, with changes in the SoC dtsi file. Remove the related obsolete TODO comment. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx943-evk: enable lpuart6 for BluetoothSherry Sun
Enable lpuart6 for Bluetooth support. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93-14x14-evk: enable lpuart5 for BluetoothSherry Sun
Enable lpuart5 for Bluetooth support. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx8-apalis: Disable the audmixFrancesco Dolcini
The audmix is not used on apalis imx8, disable it. This solves the following warning message imx-audmix imx-audmix.0: failed to find SAI platform device imx-audmix imx-audmix.0: probe with driver imx-audmix failed with error -22 Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx95-19x19-evk: enable lpuart5 for Bluetooth supportSherry Sun
Enable lpuart5 on imx95-19x19-evk board for Bluetooth support. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93-evk/qsb: add m2-pcm-level-shifter-hog to enable BT HFPSherry Sun
For i.MX93 11x11 EVK and 9x9 QSB boards, add the gpio-hog to enable the M.2 PCM pins level shifter connected between soc sai1 interface and M.2 PCM pins so that HFP feature can be supported. Since the HFP is only used at a later stage — after the BT firmware has been downloaded and the BT connection with the remote device has been established — both the pcal6524 expander and sai1 interface are already fully initialized and available by that time. Therefore, using a gpio-hog here will not introduce any probe ordering or dependency issues for the HFP use case. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: imx93: Add parallel display output nodesMarco Felsch
Add required OF nodes to support the i.MX93 parallel output (DPI) path. On the i.MX93 a single LCDIF is connected to three bridges: DPI, LVDS LDB and the MIPI-DSI whereas the i.MX91 support only the DPI bridge. Map endpoint@0 as DPI bridge output since the i.MX93 TRM (Figure 485. MEDIAMIX block diagram) doesn't mention any port-number <-> bridge combination. Set the MEDIA-AXI and MEDIA-APB clocks to the overdrive (OD) values since the i.MX93 and i.MX91 use the overdrive (OD) clk settings per default. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-24arm64: dts: axis: artpec9: Fix missing soc unit addressKrzysztof Kozlowski
Fix W=1 build warning to comply with Samsuung SoC maintainer profile: artpec9.dtsi:121.11-268.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name Fixes: 3ae2b7442cb8 ("arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260224122739.95168-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-24ARM: dts: arm: Use lowercase hexKrzysztof Kozlowski
The DTS code coding style expects lowercase hex for values and unit addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://patch.msgid.link/20251223152457.155392-4-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-24arm64: dts: axis: Add ARTPEC-9 Alfred board supportRavi Patel
Add initial devcie tree for the ARTPEC-9 Alfred board. The ARTPEC-9 Alfred is a board developed by Axis, based on the Axis ARTPEC-9 SoC. Signed-off-by: SungMin Park <smn1196@coasia.com> Signed-off-by: Ravi Patel <ravi.patel@samsung.com> Link: https://patch.msgid.link/20251119131302.79088-4-ravi.patel@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-24arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC supportSungMin Park
Add initial device tree support for Axis ARTPEC-9 SoC. This SoC contains 6 Cortex-A55 CPUs and several other peripheral IPs. Signed-off-by: SungMin Park <smn1196@coasia.com> Signed-off-by: Ravi Patel <ravi.patel@samsung.com> Link: https://patch.msgid.link/20251119131302.79088-3-ravi.patel@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-24ARM: dts: mediatek: mt7623: fix efuse fallback compatibleRafał Miłecki
Fix following validation error: arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: efuse@10206000: compatible: 'oneOf' conditional failed, one must be fixed: ['mediatek,mt7623-efuse', 'mediatek,mt8173-efuse'] is too long 'mediatek,mt8173-efuse' was expected 'mediatek,efuse' was expected from schema $id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml# arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: efuse@10206000: Unevaluated properties are not allowed ('compatible' was unexpected) from schema $id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml# Fixes: 43c7a91b4b3a ("arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mt8167: Reorder nodes according to mmio addressLuca Leonardo Scorcia
In preparation for adding display nodes. No other changes. Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt6359: give regulators unique namesDavid Lechner
Change the regulator-name properties to be unique for all regulators. U-Boot cannot handle duplicate names. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure sysconNícolas F. R. A. Prado
The infracfg-nao register space at 0x1020e000 has different registers than the infracfg space at 0x10001000, and most importantly, doesn't contain any clock controls. Therefore it shouldn't use the same compatible used for the mt8365 infracfg clocks driver: mediatek,mt8365-infracfg. Since it currently does, probe errors are reported in the kernel logs: [ 0.245959] Failed to register clk ifr_pmic_tmr: -EEXIST [ 0.245998] clk-mt8365 1020e000.infracfg: probe with driver clk-mt8365 failed with error -17 This register space is used only as a syscon for bus control by the power domain controller, so in order to properly describe it and fix the errors, set its compatible to a distinct compatible used exclusively as a syscon, drop the clock-cells, and while at it rename the node to 'syscon' following the naming convention. Fixes: 6ff945376556 ("arm64: dts: mediatek: Initial mt8365-evk support") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt8365-evk: add mmc aliasesLouis-Alexis Eyraud
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers get enumerated in a consistent order for the Mediatek Genio 350-EVK board. Also, reorder serial0 so all aliases are sorted alphanumerically. Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt8395-radxa-nio-12l: add mmc aliasesLouis-Alexis Eyraud
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers get enumerated in a consistent order for the Radxa NIO-12L board. Also, reorder ethernet0 so all aliases are sorted alphanumerically. Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt8395-genio-common: add mmc aliasesLouis-Alexis Eyraud
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers get enumerated in a consistent order for the Mediatek Genio 1200-EVK board. Also, reorder serial0 so all aliases are sorted alphanumerically. Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24arm64: dts: mediatek: mt8195-cherry: Disable xhci1 completelyChen-Yu Tsai
There is nothing connected to xhci1 in this design, nor in the actual end devices. Disable xhci1. Keep the USB PHY enabled, as it is a shared PHY and used for pcie1. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-02-24irqchip/irq-pic32-evic: Allow driver to be compiled with COMPILE_TESTBrian Masney
This driver currently only supports builds against a PIC32 target. To avoid future breakage in the future update Kconfig so that it can be built with COMPILE_TEST enabled. [ tglx: Drop the now pointless select in the pic32 Kconfig ] Signed-off-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-5-37f50d1f14af@redhat.com
2026-02-23arm64: dts: freescale: imx93-phy{core,board}: Add i2c bus recoveryPrimoz Fiser
Add bus recovery feature for I2C buses on the PHYTEC phyCORE-i.MX93 SoM based boards (that is phyBOARD-Nash-i.MX93 and phyBOARD-Segin-i.MX93). This enables the i2c-imx-lpi2c driver to recover the stuck I2C bus by switching the SCL and SDA pinmuxing and do the I2C bus bit-banging. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-23ubd: Use pointer-to-pointers for io_thread_req arraysKees Cook
Having an unbounded array for irq_req_buffer and io_req_buffer doesn't provide any bounds safety, and confuses the needed allocation type, which is returning a pointer to pointers. Instead of the implicit cast, switch the variable types. Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/all/b04b6c13-7d0e-4a89-9e68-b572b6c686ac@roeck-us.net Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types") Acked-by: Richard Weinberger <richard@nod.at> Link: https://patch.msgid.link/20260223214341.work.846-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-23ARM: dts: imx6ull-engicam-microgea-bmm: set touchscreen glitch thresholdDario Binacchi
This way the detected signal is valid only if it lasts longer than 62 µs, otherwise it is not sampled. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-23arm64: dts: imx8mp-evk: add bluetooth dts nodeSherry Sun
Add bluetooth dts node. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-23arm64: dts: imx8mp-evk: replace space with tabFrank Li
Replace spaces with tabs to follow the coding style. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-23arm64: dts: imx8mn-evk: add bluetooth dts nodeSherry Sun
Add bluetooth dts node. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-02-23arm64: dts: imx8mm-evk: add uart3 portFugang Duan
Add uart3 port. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-20 10:19:26 +0000