| Age | Commit message (Collapse) | Author |
|---|
|
1Hz as used previously was way too long.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i2c-imx can perform bus recovery by temporarily switching I2C pins
into GPIO mode. To do so, it needs GPIO and pinctrl handles to be
provided in the device tree.
Suggested-by: Denis Sergeevich <galilley@gmail.com>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the cmu_dpu clock management unit. It feeds some of the display
IPs. Additionally add the sysreg_dpu node which contains the
BUSCOMPONENT_DRCG_EN and MEMCLK registers required by cmu_dpu to enable
dynamic root clock gating of bus components.
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260113-dpu-clocks-v3-5-cb85424f2c72@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The SPCR provided console on x86 is only available as a boot console when
earlycon is provided on the kernel command line, and will not be present in
/proc/consoles.
While it's possible to retain the boot console with the keep_bootcon
parameter, that leaves the console using the less efficient 8250_early driver.
Users wanting to use the firmware suggested console (to avoid maintaining
unique serial console parameters for different server models in large fleets)
with the conventional driver have to parse the kernel log for the console
parameters and reinsert them.
[ 0.005091] ACPI: SPCR 0x000000007FFB5000 000059 (v04 ALASKA A M I 01072009 INTL 20250404)
[ 0.073387] ACPI: SPCR: console: uart,io,0x3f8,115200
In commit
0231d00082f6 ("ACPI: SPCR: Make SPCR available to x86")¹
the SPCR console was only added as an option for earlycon but not as an
ordinary console so users don't see console output changes.
So users can opt in to an automatic SPCR console, make ACPI init add it if
acpi=spcr is set.
¹https://lore.kernel.org/lkml/20180118150951.28964-1-prarit@redhat.com/
[ bp: Touchups. ]
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260117072827.355360-1-me@shenghaoyang.info
|
|
While pci_read() and pci_write() have returned errno values since their
inception with commit cd24834130ac ("s390/pci: base support") other
config accessors in particular pci_generic_config_read() as well as
pci_generic_config_write() return specific error values which are then
converted to errno by pcibios_err_to_errno(). Since latter does handle
the case where the error value already looks like an errno the previous
behavior is unlikely to cause actual issues.
Still, for consistency and in case any caller explicitly checks error
values align pci_read() and pci_write() with the generic accessors.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On s390 PCI busses and slots with multiple functions may have holes
because PCI functions are passed-through by the hypervisor on a per
function basis and some functions may be in standby or reserved. This
fact is indicated by returning true from the
hypervisor_isolated_pci_functions() helper and triggers common code to
scan all possible devfn values. Via pci_scan_single_device() this in
turn causes config reads for the device and vendor IDs, even for PCI
functions which are in standby and thereofore disabled.
So far these futile config reads, as well as potentially writes, which
can never succeed were handled by the PCI load/store instructions
themselves. This works as the platform just returns an error for
a disabled and thus not usable function handle. It does cause spamming
of error logs and additional overhead though.
Instead check if the used function handle is enabled in zpci_cfg_load()
and zpci_cfg_write() and if not enable directly return -ENODEV. Also
refactor zpci_cfg_load() and zpci_cfg_store() slightly to accommodate
the new logic while meeting modern kernel style guidelines.
Cc: stable@vger.kernel.org
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide an inline assembly using alternatives to avoid the need of a
base register due to relocatable lowcore when adding or subtracting
small constants from preempt_count.
Main user is preempt_enable(), which subtracts one from preempt_count
and tests if the result is zero.
With this the generated code changes from
1000b8: a7 19 00 00 lghi %r1,0
1000bc: eb ff 13 a8 00 6e alsi 936(%r1),-1
1000c2: a7 54 00 05 jnhe 1000cc <__rcu_read_unlock+0x14>
to something like this:
1000b8: eb ff 03 a8 00 6e alsi 936,-1
1000be: a7 54 00 05 jnhe 1000c8 <__rcu_read_unlock+0x10>
Kernel image size is reduced by 45kb (bloat-o-meter -t, defconfig, gcc15).
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With the empty define __is_enabled(__HAVE_ASM_FLAG_OUTPUTS__)
evaluates to false. Therefore let __HAVE_ASM_FLAG_OUTPUTS__ define 1
if it is defined.
This allows to make use of __is_defined(__HAVE_ASM_FLAG_OUTPUTS__)
like expected.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide an inline assembly using alternatives to avoid the need of a
base register due to relocatable lowcore when adding or subtracting
small constants from preempt_count.
Main user is preempt_disable(), which subtracts one from
preempt_count. With this the generated code changes from
10012c: a7 b9 00 00 lghi %r11,0
100130: eb 01 b3 a8 00 6a asi 936(%r11),1
to something like this:
10012c: eb 01 03 a8 00 6a asi 936,1
Kernel image size is reduced by 13kb (bloat-o-meter -t, defconfig, gcc15).
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide an inline assembly using alternatives to avoid the need of
a base register when reading preempt_count() from lowcore. Use the
LLGT instruction, which reads only the least significant 31 bits of
preempt_count. This masks out the encoded PREEMPT_NEED_RESCHED bit.
Generated code is changed from
000000000046e5d0 <vfree>:
46e5d0: c0 04 00 00 00 00 jgnop 46e5d0 <vfree>
46e5d6: a7 39 00 00 lghi %r3,0
46e5da: 58 10 33 a8 l %r1,936(%r3)
46e5de: c0 1b 00 ff ff 00 nilf %r1,16776960
46e5e4: a7 74 00 11 jne 46e606 <vfree+0x36>
to something like this:
000000000046e5d0 <vfree>:
46e5d0: c0 04 00 00 00 00 jgnop 46e5d0 <vfree>
46e5d6: e3 10 03 a8 00 17 llgt %r1,936
46e5dc: ec 41 28 b7 00 55 risbgz %r4,%r1,40,55
46e5e2: a7 74 00 0f jne 46e600 <vfree+0x30>
Overall savings are only 82 bytes according to bloat-o-meter. This
is because of different inlining decisions, and there aren't many
preempt_count() users in the kernel.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
For some reason gcc 8, 9, 10, and 11 generate a dynamic relocation in
vdso.so.dbg if CONFIG_KSTACK_ERASE is enabled:
>> arch/s390/kernel/vdso/vdso.so.dbg: dynamic relocations are not supported
make[3]: *** [arch/s390/kernel/vdso/Makefile:54: arch/s390/kernel/vdso/vdso.so.dbg] Error 1
$ readelf -rW arch/s390/kernel/vdso/vdso.so.dbg
Relocation section '.rela.dyn' at offset 0x15c0 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
00000000000015f0 000000010000000b R_390_JMP_SLOT 0000000000000000 __sanitizer_cov_stack_depth + 0
Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202601070505.xQcLr5KV-lkp@intel.com/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The i.MX ARM v4/v5 defconfig has gone out of sync with some dead options,
some removed and some missing.
1. Add missing options no longer enabled by default:
- CONFIG_I2C=y
- CONFIG_LCD_CLASS_DEVICE=y
2. Remove options enabled by default:
- CONFIG_CS89x0=y
- CONFIG_MEDIA_CAMERA_SUPPORT=y
3. Remove options that have no effect:
- # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
- # CONFIG_INET_XFRM_MODE_TUNNEL is not set
- # CONFIG_INET_XFRM_MODE_BEET is not set
4. Remove options that have been removed completely from the kernel:
- CONFIG_USB_EHCI_MXC=y
Removed by commit e7018751d2e6 ("usb: host: ehci-mxc: Remove the
driver").
- CONFIG_SMC911X=y
Removed by commit a2fd08448f2b ("net: remove smc911x driver").
- -CONFIG_SND_SOC_MX27VIS_AIC32X4=y
Removed by commit 3fbb01fb583f ("ASoC: mx27vis-aic32x4: Remove unused
driver").
- CONFIG_SND_SOC_PHYCORE_AC97=y
Removed by commit 440534a0ecfd ("ASoC: phycore-ac97: Remove unused
driver").
- CONFIG_SND_SOC_IMX_MC13783=y
Removed by commit 83e7e2278680 ("ASoC: imx-mc13783: Remove unused
driver").
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX95 imx-sm introduced new GPU_CGC clock since imx-sm commit
ca5e078833fa ("SM-128: Add clock management via CCM LPCG direct control")
which are downstream clock of GPU clock. These new GPU_CGC clock
gate the existing GPU clock. Currently, without clk_ignore_unused
on kernel command line, those new GPU_CGC clock are unused and the
kernel will disable them. This has no impact on i.MX95 A0/A1, but
does prevent GPU register access from working at all on i.MX95 B0.
The GPU_CGC clock are present on both i.MX95 A0/A1/B0, therefore
update the DT such, that the GPU core clock are the GPU_CGC clock.
When the panthor driver enables the GPU core clock, it enables both
the GPU_CGC as well as its parent GPU clock.
Fixes: 67934f248e64 ("arm64: dts: imx95: Describe Mali G310 GPU")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The binding wants the node to be named "i2c-number", but those are named
"i2c-gpio-number" instead.
Thus rename those to i2c-0, i2c-1 to adhere to the binding and suppress
dtbs_check warnings.
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a3206 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When validating a perf event group, validate_group() unconditionally
attempts to allocate hardware PMU counters for the leader, sibling
events and the new event being added.
This is incorrect for mixed-type groups. If a PERF_TYPE_SOFTWARE event
is part of the group, the current code still tries to allocate a hardware
PMU counter for it, which can wrongly consume hardware PMU resources and
cause spurious allocation failures.
Fix this by only allocating PMU counters for hardware events during group
validation, and skipping software events.
A trimmed down reproducer is as simple as this:
#include <stdio.h>
#include <assert.h>
#include <unistd.h>
#include <string.h>
#include <sys/syscall.h>
#include <linux/perf_event.h>
int main (int argc, char *argv[])
{
struct perf_event_attr attr = { 0 };
int fds[5];
attr.disabled = 1;
attr.exclude_kernel = 1;
attr.exclude_hv = 1;
attr.read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING | PERF_FORMAT_ID | PERF_FORMAT_GROUP;
attr.size = sizeof (attr);
attr.type = PERF_TYPE_SOFTWARE;
attr.config = PERF_COUNT_SW_DUMMY;
fds[0] = syscall (SYS_perf_event_open, &attr, 0, -1, -1, 0);
assert (fds[0] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
fds[1] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[1] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_INSTRUCTIONS;
fds[2] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[2] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_BRANCH_MISSES;
fds[3] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[3] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CACHE_REFERENCES;
fds[4] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[4] >= 0);
printf ("PASSED\n");
return 0;
}
Cc: stable@vger.kernel.org
Fixes: b37042b2bb7c ("LoongArch: Add perf events support")
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add child node nand@0 and move NAND related property under it to align
modern nand-controller.yaml.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtb: nand-controller@1806000 (fsl,imx6q-gpmi-nand): Unevaluated properties are not allowed ('nand-ecc-mode', 'nand-ecc-step-size', 'nand-ecc-strength', 'nand-on-flash-bbt' were unexpected)
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Since 2019 year, commit
(212e496935929 dt-bindings: mtd: Add YAML schemas for the generic NAND options)
NAND related property is preferred located under nand@<n> even though only
one NAND chip supported.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update gpmi #size-cells to 0 to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dtb: nand-controller@1806000 (fsl,imx6sx-gpmi-nand): #size-cells: 0 was expected
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add '#address-cells' and '#size-cells' for gpmi-nand to below CHECK_DTBS
warings:
arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: nand-controller@112000 (fsl,imx6q-gpmi-nand): '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add thermal-sensor and thermal-zone support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
After commit f6bff7827a48 ("riscv: uaccess: use 'asm_goto_output' for
get_user()"), which was the first commit that started using asm goto
with outputs on RISC-V, builds of clang built with assertions enabled
start crashing in certain files that use get_user() with:
clang: llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp:12743: Register FollowCopyChain(MachineRegisterInfo &, Register): Assertion `MI->getOpcode() == TargetOpcode::COPY && "start of copy chain MUST be COPY"' failed.
Internally, LLVM generates an addiw instruction when the output of the
inline asm (which may be any scalar type) needs to be sign extended for
ABI reasons, such as a later function call, so that basic block does not
have to do it.
Use a temporary 64-bit variable as the output of the inline assembly in
__get_user_asm() and explicitly cast it to truncate it if necessary,
avoiding the addiw that triggers the assertion.
Link: https://github.com/ClangBuiltLinux/linux/issues/2092
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260116-riscv-wa-llvm-asm-goto-outputs-assertion-failure-v3-1-55b5775f989b@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add missing nvidia,mipi-calibrate and cells properties to DSI nodes.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The USB2 port on Smaug is configured for OTG operation but lacked the
required 'usb-role-switch' property, leading to a failed probe and a
non-functioning USB port. Add the property along with setting the default
role to host.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Complete the missing properties in the tegra-udc node and enable it for
Smaug.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable both SOR and DPAUX modules allowing the USB-C port to transmit
video in DP altmode. Tested on several monitors with USB-C to HDMI
adapter.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
"arm,armv8" CPU compatible is only for software models and must not be
used in DTS for actual hardware. Replace them with Neoverse V3AE
compatible, based what is written on Wikipedia [1].
Link: https://en.wikipedia.org/wiki/Tegra#Thor [1]
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/59ae6b16-7866-413a-a1d2-4a735024c108@oss.qualcomm.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Device nodes are enabled by default and this DTSI file does not include
anything else, thus it is impossible that nodes were disabled before and
need to be re-enabled. Adding redundant status=okay is just confusing
and suggests some other code flow. Verified with dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Device nodes are enabled by default and this DTSI file does not include
anything else, thus it is impossible that nodes were disabled before and
need to be re-enabled. Adding redundant status=okay is just confusing
and suggests some other code flow. Verified with dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Device nodes are enabled by default and this DTSI file does not include
anything else, thus it is impossible that nodes were disabled before and
need to be re-enabled. Adding redundant status=okay is just confusing
and suggests some other code flow. Verified with dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Device nodes are enabled by default and this DTSI file does not include
anything else, thus it is impossible that nodes were disabled before and
need to be re-enabled. Adding redundant status=okay is just confusing
and suggests some other code flow. Verified with dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Command Queue Virtualization (CMDQV) hardware is part of the
SMMUv3 implementation on NVIDIA Tegra SoCs. It assists in
virtualizing the command queue for the SMMU.
Update SMMU compatible strings to use nvidia,tegra264-smmu to enable
CMDQV support. Add device tree nodes for the CMDQV hardware and enable
them on the tegra264-p3834 platform where SMMUs are enabled. Each SMMU
instance is paired with its corresponding CMDQV instance via the
nvidia,cmdqv property.
Acked-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The DBB clock is used by the EMC to enable the data path from various IP
blocks to external memory.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
partition node
"ranges" is only valid for MMIO addresses as it is used for translating
addresses to CPU address. Even if a partial translation was supported,
the DT is incorrect here as the nvmem-layout node would also need
"ranges". So drop "ranges" and the associated cell size properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260108231558.1422454-2-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The "arm,cci-400-pmu" compatible is not documented as a valid fallback
nor is it used, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-13-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The "clock-names" property is not documented for the "brcm,spi-bcm-qspi"
binding nor in use by the kernel driver, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-12-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
"brcm,pcie-ob-oarr-size" properties
The "brcm,pcie-ob-oarr-size" property is unused and undocumented, so drop
them.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-11-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The nd2-clocks.dtsi is oddly included in the middle of a bus node and is
only included in one place, so collapse it into ns2.dtsi. Move the fixed
and fixed-factor clock nodes to the root as they are not part of the
bus. Rename the node names to use preferred names.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-10-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The at25,* properties have been deprecated since 2012. This board wasn't
upstream until 2014, so it should be safe to switch over to the "new"
properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-9-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Update various node names to use the documented preferred names. Node
names/path aren't considered ABI, so changing them should be safe.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-8-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The 'raid' nodes are not MMIO devices and are not part of a bus, so move
them to the root level. Drop the unit-addresses as they don't have any
address.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-7-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Fix 'simple-bus' node names to follow the defined pattern. Nodes with 'reg'
or 'ranges' addresses should also have a unit-address.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-6-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The stringray-clocks.dtsi is oddly included in the middle of a bus
node and is only included in one place, so collapse it into
stingray.dtsi. Move the fixed and fixed-factor clock nodes to the root
as they are not part of the bus. Rename the node names to use preferred
names.
Drop the unnecessary 1:1 fixed-factor clock providers.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-5-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The "silabs,si3226x" and "brcm,bdc-v0.16" nodes have no documentation
and no driver in the kernel, so remove them. They can be added back with
proper documentation if there is a need for them.
Note that if both USB ports have similar memory maps in relationship to
their USB PHY nodes, it looks like the device controller should have
been at 0x12000, not 0x21000?
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-4-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
This fixes several typos in the filtering of compiler flags for vdso,
discovered by Chris Mason using an AI script:
1. "-fno-PIE" was written as "fno-PIE".
2. "CC_PLUGINS_FLAGS" was written as "CC_PLUGIN_FLAGS"
To the best of my knowledge, none of these actually had any real
impact on the build at this time but they are genuine bugs which could
break things at any point in the future.
Chris's script also found that "CONFIG_X86_USER_SHADOW_STACK" was
missing "CONFIG_", but it needs a different fix.
[ dhansen: remove CONFIG_X86_USER_SHADOW_STACK munging,
add mention in changelog. ]
Closes: https://lore.kernel.org/20260116035807.2307742-1-clm@meta.com
Fixes: 693c819fedcd ("x86/entry/vdso: Refactor the vdso build")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260116204057.386268-3-hpa@zytor.com
|
