| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
|
|
if-else is more readable than goto here.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/d3306fa4e92dc9cc614edc8f1802686096bafef2.1667356813.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use goto-style error handling like we do elsewhere in the kernel.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/bbbc2d9b17b137798c7fb92042141ca4cbbc58cc.1667356813.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drivers that have shared tagsets may need to quiesce potentially a lot
of request queues that all share a single tagset (e.g. nvme). Add an
interface to quiesce all the queues on a given tagset. This interface is
useful because it can speedup the quiesce by doing it in parallel.
Because some queues should not need to be quiesced (e.g. the nvme
connect_q) when quiescing the tagset, introduce a
QUEUE_FLAG_SKIP_TAGSET_QUIESCE flag to allow this new interface to
ski quiescing a particular queue.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: simplify for the per-tag_set srcu_struct]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nothing in blk_mq_wait_quiesce_done needs the request_queue now, so just
pass the tagset, and move the non-mq check into the only caller that
needs it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All I/O submissions have fairly similar latencies, and a tagset-wide
quiesce is a fairly common operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-12-hch@lst.de
[axboe: fix whitespace]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For submit_bio based queues there is no (S)RCU critical section during
I/O submission and thus nothing to wait for in blk_mq_wait_quiesce_done,
so skip doing any synchronization. No non-mq driver should be calling
this, but for now we have core callers that unconditionally call into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme and xen-blkfront are already doing this to stop buffered writes from
creating dirty pages that can't be written out later. Move it to the
common code.
This also removes the comment about the ordering from nvme, as bd_mutex
not only is gone entirely, but also hasn't been used for locking updates
to the disk size long before that, and thus the ordering requirement
documented there doesn't apply any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prevent unnecessary format conversion for bfqg->bfqd in multiple
places.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Such code are not even compiled since they are inside marco "#if 0".
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just make the code a litter cleaner by removing the unnecessary
variable 'sd'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current code is a bit ugly and hard to read.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After the patch "block, bfq: cleanup bfq_weights_tree add/remove apis"),
the local variable 'bfqd' is not used anymore, thus remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221102022542.3621219-2-yukuai1@huaweicloud.com
Fixes: afdba1461262 ("block, bfq: cleanup bfq_weights_tree add/remove apis")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only need a max queue depth for every iolatency to limit the inflight io
number. Replace struct rq_depth with unsigned int to simplfy "struct
iolatency_grp" and save memory.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20221018111240.22612-4-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Default queue depth of iolatency_grp is unlimited, so we scale down
quickly(once by half) in scale_cookie_change. Remove the "subtract
1/16th" part which is not the truth and add the actual way we
scale down.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221018111240.22612-3-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Function blkcg_iolatency_throttle will make sure blkg->parent is not
NULL before calls check_scale_change. And function check_scale_change
is only called in blkcg_iolatency_throttle.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20221018111240.22612-2-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split an elevator_disable helper from elevator_switch for the case where
we want to switch to no scheduler at all. This includes removing the
pointless elevator_switch_mq helper and removing the switch to no
schedule logic from blk_mq_init_sched.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Checking for the required features in the callers simplifies the code
quite a bit, so do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-7-hch@lst.de
[axboe: adjust for dropping patch 1, use __elevator_find()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just compare the pointers instead of using the string based
elevator_match.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use eq for the elevator_queue as done elsewhere. This frees e to be used
for the loop iterator instead of the odd __ prefix. In addition rename
elv to cur to make it more clear it is the currently selected elevator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the tag_set has BLK_MQ_F_NO_SCHED flag set we will never show any
scheduler, so exit early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Do the request_module and repeated lookup in the only caller that cares,
pick a saner name that explains where are actually doing a lookup and
use a sane calling conventions that passes the queue first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's the same with bfq_weights_tree_remove() now.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'bfq_data' and 'rb_root_cached' can both be accessed through
'bfq_queue', thus only pass 'bfq_queue' as parameter.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that root group is counted into 'num_groups_with_pending_reqs',
'num_groups_with_pending_reqs > 0' is always true in
bfq_asymmetric_scenario(). Thus change the condition to '> 1'.
On the other hand, this change can enable concurrent sync io if only
one group is activated.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, bfq can't handle sync io concurrently as long as they
are not issued from root group. This is because
'bfqd->num_groups_with_pending_reqs > 0' is always true in
bfq_asymmetric_scenario().
The way that bfqg is counted into 'num_groups_with_pending_reqs':
Before this patch:
1) root group will never be counted.
2) Count if bfqg or it's child bfqgs have pending requests.
3) Don't count if bfqg and it's child bfqgs complete all the requests.
After this patch:
1) root group is counted.
2) Count if bfqg have pending requests.
3) Don't count if bfqg complete all the requests.
With this change, the occasion that only one group is activated can be
detected, and next patch will support concurrent sync io in the
occasion.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare to refactor the counting of 'num_groups_with_pending_reqs'.
Add a counter in bfq_group, update it while tracking if bfqq have pending
requests and when bfq_bfqq_move() is called.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If entity belongs to bfqq, then entity->in_groups_with_pending_reqs
is not used currently. This patch use it to track if bfqq has pending
requests through callers of weights_tree insertion and removal.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there
before that call is gone; in any case, we are not dealing with a mix
of requests for different queues now - there's no requests left in the
plug.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a kmemleak caused by modprobe null_blk.ko
unreferenced object 0xffff8881acb1f000 (size 1024):
comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S......
backtrace:
[<000000004a10c249>] kmalloc_node_trace+0x22/0x60
[<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350
[<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0
[<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440
[<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0
[<00000000d10c98c3>] 0xffffffffc450d69d
[<00000000b9299f48>] 0xffffffffc4538392
[<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0
[<00000000b389383b>] do_init_module+0x1a4/0x680
[<0000000087cf3542>] load_module+0x6249/0x7110
[<00000000beba61b8>] __do_sys_finit_module+0x140/0x200
[<00000000fdcfff51>] do_syscall_64+0x35/0x80
[<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
xa_for_each_start(&q->hctx_table, j, hctx, j)
blk_mq_exit_hctx(q, set, hctx, j); [2]
if (!q->nr_hw_queues) [3]
goto err_hctxs;
err_exit:
q->mq_ops = NULL; [4]
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path.
Fixes: 2f8f1336a48b ("blk-mq: always free hctx after request queue is freed")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The calling relationship in blk_mq_destroy_queue() is as follows:
blk_mq_destroy_queue()
...
-> blk_queue_start_drain()
-> blk_freeze_queue_start() <- called
...
-> blk_freeze_queue()
-> blk_freeze_queue_start() <- called again
-> blk_mq_freeze_queue_wait()
...
So there is a redundant call to blk_freeze_queue_start().
Replace blk_freeze_queue() with blk_mq_freeze_queue_wait() to avoid the
redundant call.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030083212.1251255-1-nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kmemleak reported memory leaks in device_add_disk():
kmemleak: 3 new suspected memory leaks
unreferenced object 0xffff88800f420800 (size 512):
comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s)
hex dump (first 32 bytes):
04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................
00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d3662699>] kmalloc_trace+0x26/0x60
[<00000000edc7aadc>] wbt_init+0x50/0x6f0
[<0000000069601d16>] wbt_enable_default+0x157/0x1c0
[<0000000028fc393f>] blk_register_queue+0x2a4/0x420
[<000000007345a042>] device_add_disk+0x6fd/0xe40
[<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd]
...
It is because the memory allocated in wbt_enable_default() is not
released in device_add_disk() error path.
Normally, these memory are freed in:
del_gendisk()
rq_qos_exit()
rqos->ops->exit(rqos);
wbt_exit()
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Add rq_qos_exit() to the error path to fix it.
Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221029071355.35462-1-chenzhongjin@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only caller that needs queue_is_mq check is del_gendisk, so move the
check into it.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030094730.1275463-1-nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
David Jeffery found one double ->queue_rq() issue, so far it can
be triggered in VM use case because of long vmexit latency or preempt
latency of vCPU pthread or long page fault in vCPU pthread, then block
IO req could be timed out before queuing the request to hardware but after
calling blk_mq_start_request() during ->queue_rq(), then timeout handler
may handle it by requeue, then double ->queue_rq() is caused, and kernel
panic.
So far, it is driver's responsibility to cover the race between timeout
and completion, so it seems supposed to be solved in driver in theory,
given driver has enough knowledge.
But it is really one common problem, lots of driver could have similar
issue, and could be hard to fix all affected drivers, even it isn't easy
for driver to handle the race. So David suggests this patch by draining
in-progress ->queue_rq() for solving this issue.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221026051957.358818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
|
|
Function blk_mq_alloc_request_hctx() is missing zeroing/init of rq->bio,
biotail, __sector, and __data_len members, which blk_mq_alloc_request()
has, so duplicate what we do in blk_mq_alloc_request().
Fixes: 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1666780513-121650-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch removes a conditional jump from get_max_segment_size(). The
x86-64 assembler code for this function without this patch is as follows:
206 return min_not_zero(mask - offset + 1,
0x0000000000000118 <+72>: not %rax
0x000000000000011b <+75>: and 0x8(%r10),%rax
0x000000000000011f <+79>: add $0x1,%rax
0x0000000000000123 <+83>: je 0x138 <bvec_split_segs+104>
0x0000000000000125 <+85>: cmp %rdx,%rax
0x0000000000000128 <+88>: mov %rdx,%r12
0x000000000000012b <+91>: cmovbe %rax,%r12
0x000000000000012f <+95>: test %rdx,%rdx
0x0000000000000132 <+98>: mov %eax,%edx
0x0000000000000134 <+100>: cmovne %r12d,%edx
With this patch applied:
206 return min(mask - offset, (unsigned long)lim->max_segment_size - 1) + 1;
0x000000000000003f <+63>: mov 0x28(%rdi),%ebp
0x0000000000000042 <+66>: not %rax
0x0000000000000045 <+69>: and 0x8(%rdi),%rax
0x0000000000000049 <+73>: sub $0x1,%rbp
0x000000000000004d <+77>: cmp %rbp,%rax
0x0000000000000050 <+80>: cmova %rbp,%rax
0x0000000000000054 <+84>: add $0x1,%eax
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-4-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document which functions do not modify the queue limits.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-3-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_start_io_acct_time is not actually used anywhere, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221025155916.270303-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference. Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current reference management logic of io scheduler modules contains
refcnt problems. For example, blk_mq_init_sched may fail before or after
the calling of e->ops.init_sched. If it fails before the calling, it does
nothing to the reference to the io scheduler module. But if it fails after
the calling, it releases the reference by calling kobject_put(&eq->kobj).
As the callers of blk_mq_init_sched can't know exactly where the failure
happens, they can't handle the reference to the io scheduler module
properly: releasing the reference on failure results in double-release if
blk_mq_init_sched has released it, and not releasing the reference results
in ghost reference if blk_mq_init_sched did not release it either.
The same problem also exists in io schedulers' init_sched implementations.
We can address the problem by adding releasing statements to the error
handling procedures of blk_mq_init_sched and init_sched implementations.
But that is counterintuitive and requires modifications to existing io
schedulers.
Instead, We make elevator_alloc get the io scheduler module references
that will be released by elevator_release. And then, we match each
elevator_get with an elevator_put. Therefore, each reference to an io
scheduler module explicitly has its own getter and releaser, and we no
longer need to worry about the refcnt problems.
The bugs and the patch can be validated with tools here:
https://github.com/nickyc975/linux_elv_refcnt_bug.git
[hch: split out a few bits into separate patches, use a non-try
module_get in elevator_alloc]
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to find the actual elevator_type struct for this comparism,
the name is all that is needed.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The stripped name should also be used for the none check. To do so
strip it in the caller and pass in the sanitized name. Drop the pointless
__ prefix in the function name while we're at it.
Based on a patch from Jinlong Chen <nickyc975@zju.edu.cn>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure we have helpers for all relevant module refcount operations on
the elevator_type in elevator.h, and use them. Move the call to the get
helper in blk_mq_elv_switch_none a bit so that it is obvious with a less
verbose comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b5dc5d4d1f4f ("block,bfq: Disable writeback throttling") tries to
disable wbt for bfq, it's done by calling wbt_disable_default() in
bfq_init_queue(). However, wbt is still enabled if default elevator is
bfq:
device_add_disk
elevator_init_mq
bfq_init_queue
wbt_disable_default -> done nothing
blk_register_queue
wbt_enable_default -> wbt is enabled
Fix the problem by adding a new flag ELEVATOR_FLAG_DISBALE_WBT, bfq
will set the flag in bfq_init_queue, and following wbt_enable_default()
won't enable wbt while the flag is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are only one flag to indicate that elevator is registered currently,
prepare to add a flag to disable wbt if default elevator is bfq.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, if wbt is initialized and then disabled by
wbt_disable_default(), sysfs will still show valid wbt_lat_usec, which
will confuse users that wbt is still enabled.
This patch shows wbt_lat_usec as zero if it's disabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reported-and-tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, if user disable wbt through sysfs, 'enable_state' will be
'WBT_STATE_ON_MANUAL', which will be confusing. Add a new state
'WBT_STATE_OFF_MANUAL' to cover that case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If CONFIG_BLK_WBT_MQ is disabled, wbt_init() won't do anything.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
"elevator_queue *e" is already declared and initialized in the beginning
of elv_unregister_queue().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221019121518.3865235-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
