| Age | Commit message (Collapse) | Author |
|---|
|
The A523/T527 SoCs have a new MCU PRCM, which has more clocks and reset
controls for the RISC-V MCU and other peripherals. There is a second
audio PLL, but no bus clock dividers. The BSP driver uses the 24MHz main
oscillator as the parent for all the bus clocks. But the diagram
suggests busses from the other PRCM are used in this block as well.
Add a driver to support this part. Unlike the BSP driver, the SoC's main
MBUS clock is chosen as the parent for the MCU MBUS clock, and the
latter then serves as the parent of the MCU DMA controller's MBUS clock.
The bus gate clocks also use their respective bus clocks as parents
according to the system bus tree diagram. In cases where a block does
not appear in that diagram, an educated guess is made.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Some clocks (for timers) on the A523 are mux-divider-gate types
with the divider being values of power-of-two.
Add a macro for these types of clocks so that we can use the divider
types instead of the M-P types without an M divider.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Also, merge the private header back into the driver code itself. The
header only contains a macro containing the total number of clocks.
This has to be updated every time a missing clock gets added. Having
it in a separate file doesn't help the process. Instead just drop the
macro, and thus the header no longer has any reason to exist.
Also move the .num value to after the list of clks to make it obvious
that it should be updated when new clks are added.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When runtime PM is used for clock providers that are part of a power
domain, the power domain supply is cut off during runtime suspend. This
causes all BLK CTL registers belonging to that power domain to reset. To
prevent this, save the state of the registers before entering suspend
and restore them on resume. Additionally, disable the APB clock during
suspend to minimize power consumption.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250804131450.3918846-3-laurentiu.palcu@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Add a platform data (pdata) member to struct imx95_blk_ctl to store the
result of of_device_get_match_data() during probe to avoid redundant
calls in suspend and resume functions.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250804131450.3918846-2-laurentiu.palcu@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The clock drivers for RZ/V2H and RZ/V2N are very similar.
Reduce the differences between them by:
- Moving and reformatting the PLLCM33_GEAR clock definitions,
- Replacing spaces by TABs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/2246d2263e8a24d1aaf653db2004cbf2263c9048.1757606097.git.geert+renesas@glider.be
|
|
Add USB3.0 clock and reset entries.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250909180803.140939-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
In case of krealloc_array() failure, the current error handling just
returns from the function without freeing the original array.
Fix this memory leak by freeing the original array.
Fixes: 6aa1754764901668 ("clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system")
Signed-off-by: Yuan CHen <chenyuan@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250908012810.4767-1-chenyuan_fl@163.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Drop an obsolete comment about keeping the PCIe GDSCs always-on,
something which is no longer the case since commit db382dd55bcb ("clk:
qcom: gcc-sc8280xp: Allow PCIe GDSCs to enter retention state").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250910134737.19381-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
Cc: stable@vger.kernel.org # v6.9
Fixes: 06aff116199c ("clk: qcom: Add TCSR clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250730-clk-qcom-tcsrcc-x1e80100-parent-edp-refclk-v1-1-7a36ef06e045@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add module clock entries for the I3C controller on the RZ/V2N
(R9A09G056) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250904155507.245744-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add module clock entries for the I3C controller on the RZ/V2H(P)
(R9A09G057) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250904155507.245744-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The DVCO present in the DFLL IP block has a separate reset line, exposed
via the CAR IP block. This reset line is asserted upon SoC reset.
Unless something (such as the DFLL driver) deasserts this line, the DVCO
will not oscillate, although reads and writes to the DFLL IP block will
complete.
Based on a3c83ff2 ("clk: tegra: Add DFLL DVCO reset control for Tegra124")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra30 has CSI pad clock enable bits embedded into PLLD/PLLD2 registers.
Add ids for these clocks. Additionally, move TEGRA30_CLK_CLK_MAX into
clk-tegra30 source.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation.
Fixes: 45717804b75e ("clk: sunxi-ng: mp: introduce dual-divider clock")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250830170901.1996227-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250909-constify-dispcc-glymur-desc-fix-v1-1-6cb59730863f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops.
The existing scmi_clk_determine_rate() is a noop implementation that
lets the firmware round the rate as appropriate. Drop the existing
determine_rate implementation and convert the existing round_rate()
implementation over to determine_rate().
scmi_clk_determine_rate() was added recently when the clock parent
support was added, so it's not expected that this change will regress
anything.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95-19x19-EVK
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate(). Part of these changes were done
using the Coccinelle semantic patch on the cover letter of this
series, and the rest of the changes were manually done.
omap4_dpll_regm4xen_round_rate() is now only called by
omap4_dpll_regm4xen_determine_rate(), so let's merge that functionality
into one function. This is needed for another cleanup to completely
remove the round_rate() clk ops from the clk core.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
When the requested rate cannot be achieved, omap2_dpll_round_rate()
will return ~0. Let's change this to -EINVAL to make the code a little
cleaner to read. This is no functional change.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate().
Note that this change also requires the same migration to
drivers/clk/tegra/clk-divider.c.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate().
Note that this change also requires the same migration to
drivers/clk/tegra/clk-divider.c.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops. Also all clk drivers that directly calls
fixed-factor's round_rate() have been migrated over to determine_rate().
So let's remove the round_rate() clk ops.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops. Also all clk drivers that directly calls
divider's round_rate() have been migrated over to determine_rate(). So
let's remove the round_rate() clk ops.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Note that prior to running the Coccinelle, div_round_ro_rate() was
renamed to div_ro_round_rate().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
