| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for migration to use of standard MIB API, generalize the
read port stats logic to a dedicated function.
This will permit to manually provide the offset and size of the MIB
counter to directly access specific counter.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-2-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add coverage for the TX Extension (TEI) Interface (TTI) stats. We are
tracking packets and control message drops because of credit exhaustion
on the TX interface.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-6-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch add coverage for TMI stats including PTP stats and drop
stats.
PTP stats include illegal requests, bad timestamp and good timestamps.
The bad timestamp and illegal request counters are reported under as
`error` via `ethtool -T` Both these counters are individually being
reported via `ethtool -S`
The good timestamp stats are being reported as `pkts` via `ethtool -T`
ethtool -S eth0 | grep "ptp"
ptp_illegal_req: 0
ptp_good_ts: 0
ptp_bad_ts: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats
are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue
stats.
The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the
input/output counters whereas, the RXB fifo stats are indexed from 0-7.
The RXB also supports pause frame stats counters which we are leaving
for a later patch.
ethtool -S eth0 | grep rxb
rxb_integrity_err0: 0
rxb_mac_err0: 0
rxb_parser_err0: 0
rxb_frm_err0: 0
rxb_drbo0_frames: 1433543
rxb_drbo0_bytes: 775949081
---
---
rxb_intf3_frames: 1195711
rxb_intf3_bytes: 739650210
rxb_pbuf3_frames: 1195711
rxb_pbuf3_bytes: 765948092
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch provides support for hardware queue stats and covers
packet errors for RX-DMA engine, RCQ drops and BDQ drops.
The packet errors are also aggregated with the `rx_errors` stats in the
`rtnl_link_stats` as well as with the `hw_drops` in the queue API.
The RCQ and BDQ drops are aggregated with `rx_over_errors` in the
`rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API.
ethtool -S eth0 | grep -E 'rde'
rde_0_pkt_err: 0
rde_0_pkt_cq_drop: 0
rde_0_pkt_bdq_drop: 0
---
---
rde_127_pkt_err: 0
rde_127_pkt_cq_drop: 0
rde_127_pkt_bdq_drop: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds lock protection for the hardware statistics for fbnic.
The hardware statistics access via ndo_get_stats64 is not protected by
the rtnl_lock(). Since these stats can be accessed from different places
in the code such as service task, ethtool, Q-API, and net_device_ops, a
lock-less approach can lead to races.
Note that this patch is not a fix rather, just a prep for the subsequent
changes in this series.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a driver for the MDIO controller on the RTL9300 family of Ethernet
switches with integrated SoC. There are 4 physical SMI interfaces on the
RTL9300 however access is done using the switch ports. The driver takes
the MDIO bus hierarchy from the DTS and uses this to configure the
switch ports so they are associated with the correct PHY. This mapping
is also used when dealing with software requests from phylib.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409231554.3943115-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix niu_try_msix() to not cause a fatal trap on sparc systems.
Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to
work around a bug in the hardware or firmware.
For each vector entry in the msix table, niu chips will cause a fatal
trap if any registers in that entry are read before that entries'
ENTRY_DATA register is written to. Testing indicates writes to other
registers are not sufficient to prevent the fatal trap, however the value
does not appear to matter. This only needs to happen once after power up,
so simply rebooting into a kernel lacking this fix will NOT cause the
trap.
NON-RESUMABLE ERROR: Reporting on cpu 64
NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0>
NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff
NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000]
NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff]
NON-RESUMABLE ERROR: type [precise nonresumable]
NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv >
NON-RESUMABLE ERROR: raddr [0xffffffffffffffff]
NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c]
NON-RESUMABLE ERROR: size [0x8]
NON-RESUMABLE ERROR: asi [0x00]
CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63
Workqueue: events work_for_cpu_fn
TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted
TPC: <msix_prepare_msi_desc+0x90/0xa0>
g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100
g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000
o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620
o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128
RPC: <__pci_enable_msix_range+0x3cc/0x460>
l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020
l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734
i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d
i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0
I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]>
Call Trace:
[<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu]
[<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu]
[<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu]
[<00000000005ef3e4>] local_pci_probe+0x28/0x74
[<0000000000469240>] work_for_cpu_fn+0x8/0x1c
[<000000000046b008>] process_scheduled_works+0x144/0x210
[<000000000046b518>] worker_thread+0x13c/0x1c0
[<00000000004710e0>] kthread+0xb8/0xc8
[<00000000004060c8>] ret_from_fork+0x1c/0x2c
[<0000000000000000>] 0x0
Kernel panic - not syncing: Non-resumable error.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-3-dullfire@yahoo.com
|
|
qcom-ethqos doesn't need to implement the speed_mode_2500() method as
it is only setting priv->plat->phy_interface to 2500BASE-X, which is
already a pre-condition for assigning speed_mode_2500 in
qcom_ethqos_probe(). So, qcom_ethqos_speed_mode_2500() has no effect.
Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYa-000EcW-H1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylink will already limit the MAC speed according to the interface,
so if 2500BASE-X is selected, the maximum speed will be 2.5G. It is,
therefore, not necessary to set a speed limit. Remove setting
plat_dat->max_speed from this glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYV-000EcQ-Cv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than ethqos_fix_mac_speed() storing the speed in struct
qcom_ethqos and then functions that are only called from here reading
that speed, pass the speed to the called functions instead.
This removes all readers of this struct member, which then allows the
removal of the two places that set its value and the struct member.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYQ-000EcK-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethqos->serdes_speed represents the current speed the serdes was
configured for, which should be the same as ethqos->speed. Since we
wish to remove ethqos->speed to simplify the code, switch to using the
serdes_speed instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYL-000EcE-5c@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new type of dump object and dump all action STE tables,
along with information on their RTCs and STEs.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Hamdan Agbariya <hamdani@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-13-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Periodically check for unused action STE tables and free their
associated resources. In order to do this safely, add a per-queue lock
to synchronize the garbage collect work with regular operations on
steering rules.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-12-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the matcher action STE implementation now that the code uses
per-queue action STE pools. This also allows simplifying matcher code
because it is now only handling a single type of RTC/STE.
The matcher resize data is also going away. Matchers were saving old
action STE data because the rules still used it, but now that data lives
in the action STE pool and is no longer coupled to a matcher.
Furthermore, matchers no longer need to rehash a due to action template
addition. If a new action template needs more action STEs, we simply
update the matcher's num_of_action_stes and future rules will allocate
the correct number. Existing rules are unaffected by such an operation
and can continue to use their existing action STEs.
The range action was using the matcher action STE implementation, but
there was no reason to do this other than the container fitting the
purpose. Extract that information to a separate structure.
Finally, stop dumping per-matcher information about action RTCs,
because they no longer exist. A later patch in this series will add
support for dumping action STE pools.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-11-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the central action STE pool when creating / updating rules.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-10-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement a per-queue pool of action STEs that match STEs can link to,
regardless of matcher.
The code relies on hints to optimize whether a given rule is added to
rx-only, tx-only or both. Correspondingly, action STEs need to be added
to different RTC for ingress or egress paths. For rx-and-tx rules, the
current rule implementation dictates that the offsets for a given rule
must be the same in both RTCs.
To avoid wasting STEs, each action STE pool element holds 3 pools:
rx-only, tx-only, and rx-and-tx, corresponding to the possible values of
the pool optimization enum. The implementation then chooses at rule
creation / update which of these elements to allocate from.
Each element holds multiple action STE tables, which wrap an RTC, an STE
range, the logic to buddy-allocate offsets from the range, and an STC
that allows match STEs to point to this table. When allocating offsets
from an element, we iterate through available action STE tables and, if
needed, create a new table.
Similar to the previous implementation, this iteration does not free any
resources. This is implemented in a subsequent patch.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-9-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The optimization to create a size-one STE range for the unused direction
was broken. The hardware prevents us from creating RTCs over unallocated
STE space, so the only reason this has worked so far is because the
optimization was never used.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Future users will need to query whether a pool is empty.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove members which are now no longer used. In fact, many of the
`struct mlx5hws_pool_chunk` were not even written to beyond being
initialized, but they were used in various internals.
Also cleanup some local variables which made more sense when the API was
thicker.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the pool implementation to remove unused flags and clarify its
usage. A pool represents a single range of STEs or STCs which are
allocated at pool creation time.
Pools are used under three patterns:
1. STCs are allocated one at a time from a global pool using a bitmap
based implementation.
2. Action STEs are allocated in power-of-two blocks using a buddy
algorithm.
3. Match STEs do not use allocation, since insertion into these tables
is based on hashes or direct addressing. In such cases we use a pool
only to create the STE range.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pool implementation claimed to support multiple resources, but this
does not really make sense in context. Callers always allocate a single
STC or STE chunk of exactly the size provided.
The code that handled multiple resources was unused (and likely buggy)
due to the combination of flags passed by callers.
Simplify the pool by having it handle a single resource. As a result of
this simplification, chunks no longer contain a resource offset (there
is now only one resource per pool), and the get_base_id functions no
longer take a chunk parameter.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the array of elements wrapped in a struct because in reality only
the first element was ever used.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The procedure of attaching an action template to an existing matcher had
a few issues:
1. Attaching accidentally overran the `at` array in bwc_matcher, which
would result in memory corruption. This bug wasn't triggered, but it
is possible to trigger it by attaching action templates beyond the
initial buffer size of 8. Fix this by converting to a dynamically
sized buffer and reallocating if needed.
2. Similarly, the `at` array inside the native matcher was never
reallocated. Fix this the same as above.
3. The bwc layer treated any error in action template attach as a signal
that the matcher should be rehashed to account for a larger number of
action STEs. In reality, there are other unrelated errors that can
arise and they should be propagated upstack. Fix this by adding a
`need_rehash` output parameter that's orthogonal to error codes.
Fixes: 2111bb970c78 ("net/mlx5: HWS, added backward-compatible API handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1744312662-356571-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement Enhanced Transmission Selection scheduler (ETS) support for
KSZ88x3 devices, which support two fixed egress scheduling modes:
Strict Priority and Weighted Fair Queuing (WFQ).
Since the switch does not allow remapping priorities to queues or
adjusting weights, this implementation only supports enabling
strict priority mode. If strict mode is not explicitly requested,
the switch falls back to its default WFQ mode.
This patch introduces KSZ88x3-specific handlers for ETS add and
delete operations and uses TXQ Split Control registers to toggle
the WFQ enable bit per queue. Corresponding macros are also added
for register access.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250410124249.2728568-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GMAC_1US_TIC_COUNTER is now no longer used, so remove the definition.
This was duplicated by GMAC4_MAC_ONEUS_TIC_COUNTER further down in the
same file.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u3Vv0-000E87-DQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the write to GMAC_1US_TIC_COUNTER for two reasons:
1. during initialisation or reinitialisation of the DWMAC core, the
core is reset, which sets this register back to its default value.
Writing it prior to stmmac_dvr_probe() has no effect.
2. Since commit 8efbdbfa9938 ("net: stmmac: Initialize
MAC_ONEUS_TIC_COUNTER register"), GMAC4/5 core code will set
this register based on the rate of plat->stmmac_clk. This clock
is fetched by devm_stmmac_probe_config_dt(), and plat->clk_ptp_rate
will be set to its rate profided a "ptp_ref" clock is not provided.
In any case, Marek's commit will set the effectual value of this
register.
Therefore, dwmac-intel-plat.c writing GMAC_1US_TIC_COUNTER serves no
useful purpose and can be removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u3Vuq-000E7s-5Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the write to GMAC_1US_TIC_COUNTER for two reasons:
1. during initialisation or reinitialisation of the DWMAC core, the
core is reset, which sets this register back to its default value.
Writing it prior to stmmac_dvr_probe() has no effect.
2. Since commit 8efbdbfa9938 ("net: stmmac: Initialize
MAC_ONEUS_TIC_COUNTER register"), GMAC4/5 core code will set
this register based on the rate of plat->stmmac_clk. This clock
is created by the same code which initialises plat->eee_usecs_rate,
which is also created to run at this same rate. Since Marek's
commit, this will set this register appropriately using the
rate of this clock.
Therefore, dwmac-intel.c writing GMAC_1US_TIC_COUNTER serves no
useful purpose and can be removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u3Vul-000E7m-1j@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tegra_eqos_init() initialises the 1US TIC counter for the EEE timers.
However, the DWGMAC core is reset after this write, which clears
this register to its default.
However, dwmac4_core_init() configures this register using the same
clock, which happens after reset - thus this is the write which
ensures that the register is correctly configured.
Therefore, tegra_eqos_init() is not required and is removed. This also
means eqos->clk_slave can also be removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u3Vuf-000E7g-U4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
geneve_exit_batch_rtnl() iterates the dying netns list and
performs the same operation for each.
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-14-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bareudp_exit_batch_rtnl() iterates the dying netns list and performs the
same operation for each.
Let's use ->exit_rtnl().
While at it, we replace unregister_netdevice_queue() with
bareudp_dellink() for better cleanup. It unlinks the device
from net_generic(net, bareudp_net_id)->bareudp_list, but there
is no real issue as both the dev and the list are freed later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-13-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gtp_net_exit_batch_rtnl() iterates the dying netns list
and performs the same operations for each.
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_net_exit_batch_rtnl() iterates the dying netns list and
performs the same operation for each.
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vxlan_exit_batch_rtnl() iterates the dying netns list and
performs the same operations for each.
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we are about to stash some more information into the pp_magic
field, let's move the magic signature checks into a pair of helper
functions so it can be changed in one place.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-1-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-11 (ice, i40e, ixgbe, igc, e1000e)
For ice:
Mateusz and Larysa add support for LLDP packets to be received on a VF
and transmitted by a VF in switchdev mode. Additional information:
https://lore.kernel.org/intel-wired-lan/20250214085215.2846063-1-larysa.zaremba@intel.com/
Karol adds timesync support for E825C devices using 2xNAC (Network
Acceleration Complex) configuration. 2xNAC mode is the mode in which
IO die is housing two complexes and each of them has its own PHY
connected to it.
Martyna adds messaging to clarify filter errors when recipe space is
exhausted.
Colin Ian King adds static modifier to a const array to avoid stack
usage.
For i40e:
Kyungwook Boo changes variable declaration types to prevent possible
underflow.
For ixgbe:
Rand Deeb adjusts retry values so that retries are attempted.
For igc:
Rui Salvaterra sets VLAN offloads to be enabled as default.
For e1000e:
Piotr Wejman converts driver to use newer hardware timestamping API.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net: e1000e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igc: enable HW vlan tag insertion/stripping by default
ixgbe: Fix unreachable retry logic in combined and byte I2C write functions
i40e: fix MMIO write access to an invalid page in i40e_clear_hw
ice: make const read-only array dflt_rules static
ice: improve error message for insufficient filter space
ice: enable timesync operation on 2xNAC E825 devices
ice: refactor ice_sbq_msg_dev enum
ice: remove SW side band access workaround for E825
ice: enable LLDP TX for VFs through tc
ice: support egress drop rules on PF
ice: remove headers argument from ice_tc_count_lkups
ice: receive LLDP on trusted VFs
ice: do not add LLDP-specific filter if not necessary
ice: fix check for existing switch rule
====================
Link: https://patch.msgid.link/20250411204401.3271306-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix PTM timeout
Christopher S M Hall says:
There have been sporadic reports of PTM timeouts using i225/i226 devices
These timeouts have been root caused to:
1) Manipulating the PTM status register while PTM is enabled
and triggered
2) The hardware retrying too quickly when an inappropriate response
is received from the upstream device
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
The first patch in this series also resolves an issue reported by Corinna
Vinschen relating to kdump:
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not zero, but extremly reduced.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: add lock preventing multiple simultaneous PTM transactions
igc: cleanup PTP module if probe fails
igc: handle the IGC_PTP_ENABLED flag correctly
igc: move ktime snapshot into PTM retry loop
igc: increase wait time before retrying PTM
igc: fix PTM cycle trigger logic
====================
Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 8fa7292fee5c ("treewide: Switch/rename to timer_delete[_sync]()")
switched del_timer_sync to timer_delete_sync, but did not modify the
comment for bnad_dim_timeout(). Now fix it.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/61DDCE7AB5B6CE82+20250411101736.160981-1-wangyuli@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When operating with multiple devices grouped together, the firmware stores
data related to the state machine of each partner device in the MLO global
memory region. If the firmware crashes, it updates the state to 'crashed'.
During recovery, this memory is shared with the firmware again, and upon
detecting the 'crashed' state, it reasserts. This leads to a loop of
firmware asserts and it never recovers.
Hence to fix this issue, once all devices in the group have been asserted
and powered down, reset the MLO global memory region.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-9-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in ath12k_core_reset(), the device is powered up immediately
after a power down. However, with hardware grouping, when one device
asserts, all partner devices also asserts. If there is a delay in
processing these asserts, by the time this device powers up, other devices
might still be asserting, leading to an overall recovery failure.
To prevent this issue, ensure all asserts for a group are processed before
initiating the power-up sequence.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-8-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, when ath12k_core_restart() is called and the ab->is_reset flag
is set, it invokes ieee80211_restart_hw() for all hardware in the same
group. However, other hardware might still be in the recovery process,
making this call inappropriate with grouping into picture.
To address this, add a condition to check if the group is ready. If the
group is not ready, do not call ieee80211_restart_hw().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-7-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_core_pre_reconfigure_recovery() reconfigures all radios
within the same group. During grouping and driver going for a recovery,
this function is called as many times as there are devices in the group.
Consequently, it performs the same reconfiguration multiple times, which
is unnecessary.
To prevent this, add a check to continue if the action has already been
taken.
To simplify the management of various flags, the reason for hardware queues
being stopped is used as a check instead of introducing a new flag.
While at it, also add missing wiphy locks. Wiphy lock is required since
ath12k_mac_drain_tx() which is called by
ath12k_core_pre_reconfigure_recovery() needs this lock to be held by the
caller.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-6-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
At present, during PCI shutdown, the power down is only executed for a
single device. However, when operating in a group, all devices need to be
powered down simultaneously. Failure to do so will result in a firmware
assertion.
Hence, introduce a new ath12k_pci_hw_group_power_down() and call it during
power down. This will ensure that all partner devices are properly powered
down.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-5-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a5686ae820fa ("wifi: ath12k: move ATH12K_FLAG_REGISTERED handling to
ath12k_mac_register()") relocated the setting of the ATH12K_FLAG_REGISTERED
flag to the ath12k_mac_register() function. However, this function only
accesses the first device (ab) via ag->ab[0], resulting in the flag being
set only for the first device in the group. Similarly,
ath12k_mac_unregister() only unsets the flag for the first device. The flag
should actually be set for all devices in the group to avoid issues during
recovery.
Hence, move setting and clearing of this flag in the function
ath12k_core_hw_group_start() and ath12k_core_hw_group_stop() respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: a5686ae820fa ("wifi: ath12k: move ATH12K_FLAG_REGISTERED handling to ath12k_mac_register()")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-4-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
grouping
With hardware grouping, during reboot, whenever a device is removed, it
powers down itself and all its partner devices in the same group. Now this
is done by all devices and hence there is multiple power down for devices
and hence the following error messages can be seen:
ath12k_pci 0002:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0002:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0003:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0003:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0004:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0004:01:00.0: failed to set mhi state: POWER_OFF(3)
To prevent this, check if the ATH12K_PCI_FLAG_INIT_DONE flag is already
set before powering down. If it is set, it indicates that another partner
device has already performed the power down, and this device can skip this
step.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-3-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, driver does not manage reference counting for attaching and
detaching cores to/from hardware groups. This can lead to issues when
multiple cores are involved. Or with same core, attach/detach is called
multiple times back to back.
Fix this issue by using reference counting.
With that, it is now ensured that the core is properly attached or detached
from the hardware group and even back to back calls will not alter the
count.
Additionally, add some debug logs during the attachment and detachment
events for better debugging and tracking.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-2-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
During rmmod of ath12k module with SLUB debug enabled, following print is
seen -
=============================================================================
BUG kmalloc-1k (Not tainted): Object already free
-----------------------------------------------------------------------------
Allocated in ath12k_reg_build_regd+0x94/0xa20 [ath12k] age=10470 cpu=0 pid=0
__kmalloc_noprof+0xf4/0x368
ath12k_reg_build_regd+0x94/0xa20 [ath12k]
ath12k_wmi_op_rx+0x199c/0x2c14 [ath12k]
ath12k_htc_rx_completion_handler+0x398/0x554 [ath12k]
ath12k_ce_per_engine_service+0x248/0x368 [ath12k]
ath12k_pci_ce_workqueue+0x28/0x50 [ath12k]
process_one_work+0x14c/0x28c
bh_worker+0x22c/0x27c
workqueue_softirq_action+0x80/0x90
tasklet_action+0x14/0x3c
handle_softirqs+0x108/0x240
__do_softirq+0x14/0x20
Freed in ath12k_reg_free+0x40/0x74 [ath12k] age=136 cpu=2 pid=166
kfree+0x148/0x248
ath12k_reg_free+0x40/0x74 [ath12k]
ath12k_core_hw_group_destroy+0x68/0xac [ath12k]
ath12k_core_deinit+0xd8/0x124 [ath12k]
ath12k_pci_remove+0x6c/0x130 [ath12k]
pci_device_remove+0x44/0xe8
device_remove+0x4c/0x80
device_release_driver_internal+0x1d0/0x22c
driver_detach+0x50/0x98
bus_remove_driver+0x70/0xf4
driver_unregister+0x30/0x60
pci_unregister_driver+0x24/0x9c
ath12k_pci_exit+0x18/0x24 [ath12k]
__arm64_sys_delete_module+0x1a0/0x2a8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
Slab 0xfffffdffc0033600 objects=10 used=6 fp=0xffff000000cdcc00 flags=0x3fffe0000000240(workingset|head|node=0|zone=0|lastcpupid=0x1ffff)
Object 0xffff000000cdcc00 @offset=19456 fp=0xffff000000cde400
[...]
This issue arises because in ath12k_core_hw_group_destroy(), each device
calls ath12k_core_soc_destroy() for itself and all its partners within the
same group. Since ath12k_core_hw_group_destroy() is invoked for each
device, this results in a double free condition, eventually causing the
SLUB bug.
To resolve this, set the freed pointers to NULL. And since there could be
a race condition to read these pointers, guard these with the available
mutex lock.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-1-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If the user tries to write more than 32 bytes then it results in memory
corruption. Fortunately, this is debugfs so it's limited to root users.
Fixes: 3f73c24f28b3 ("wifi: ath12k: Add support to enable debugfs_htt_stats")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/35daefbd-d493-41d9-b192-96177d521b40@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The devm_memremap() function returns error pointers on error and the
ioremap() function returns NULL on error. The error checking here got
those flipped around.
Fixes: c01d5cc9b9fe ("wifi: ath12k: Power up userPD")
Fixes: 6cee30f0da75 ("wifi: ath12k: add AHB driver support for IPQ5332")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/937abc74-9648-4c05-a2c3-8db408b3ed9e@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The use of of_property_read_u32() isn't really correct as
"memory-region" contains phandles (though those happen to be u32s. As
it is just testing for property presence, use of_property_present()
instead.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250408190211.2505737-2-robh@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
