| Age | Commit message (Collapse) | Author |
|---|
|
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty.
Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260702-macb-drop-tx-v4-1-1c833eebdbc8@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted.
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-07-01 (igc, igb)
Kohei Enju adds ethtool support for get/set hash key on igc and adds
setting of skb hash type based on values from Rx descriptor on igb.
Takashi Kozu adds ethtool support for get/set hash key on igb.
Faizal adds support for forcing link speed via ethtool when
autonegotiation is disabled on the igc driver.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: add support for forcing link speed without autonegotiation
igc: replace goto out with direct returns in igc_config_fc_after_link_up()
igc: move autoneg-enabled settings into igc_handle_autoneg_enabled()
igc: remove unused autoneg_failed field
igb: set skb hash type from RSS_TYPE
igb: allow configuring RSS key via ethtool set_rxfh
igb: expose RSS key via ethtool get_rxfh
igb: prepare for RSS key get/set support
igc: allow configuring RSS key via ethtool set_rxfh
igc: expose RSS key via ethtool get_rxfh
igc: prepare for RSS key get/set support
====================
Link: https://patch.msgid.link/20260701210303.1745310-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bytes_sent and bytes_rcvd members of structs asyncppp and syncppp
are not used. Drop them.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260702060420.95023-1-jirislaby@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf98 ("octeontx2-pf: Add support for SR-IOV management functions")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Satellite PFs are local to the DPU and are not on an external host.
Set their devlink port external attribute to false to reflect this.
For satellite PF SFs, distinguish them from host PF SFs by comparing
the SF controller number against the host PF controller
(hpf_host_number + 1). Only SFs whose controller matches the host PF
are marked external, since their PF resides on an external host.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260702111726.816985-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The drive strength configuration is done during the setup of all
switches through a common function that then has specific behavior
depending on the switch identity.
Split the common configuration in two functions: one is dedicated to the
KSZ8 family, the other is dedicated to the KSZ9477 family.
Remove the drive strength configuration from the lan937x_setup since
the LAN937x family doesn't support it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-10-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz9477_drive_strength_write() isn't used for the KSZ9477-family only.
It's also used for the KSZ87xx chip variants. This function name is
misleading.
Rename it ksz_drive_strength_write().
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-9-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz9477_set_default_prio_queue_mapping() dictates a KSZ9477-specific
behavior but is defined in the common section of the code.
Move its definition to the KSZ9477-specific area.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-8-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The setup of QDISC_ETS isn't the same for the KSZ8 switches than for
the other switches. It leads to is_ksz8() branches in the common code.
Move the KSZ8-specific portions into ksz8.c by creating two setup_tc()
functions, one dedicated to the KSZ87xx family that only handles the
TC_SETUP_QDISC_CBS case, one for the rest of the KSZ8 that handles both
TC_SETUP_QDISC_CBS and TC_SETUP_QDISC_ETS cases.
It remains some is_kszXXXX() branches because inside the ksz88xx family,
only the ksz88x3 switches support QDISC_ETS.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-7-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 PHY errata is handled from the common ksz_r_mib_stat64().
This errata clearly belongs to the KSZ9477 family so it should be handled
from the ksz9477-specific portion of the driver.
Create a ksz9477-specific r_mib_stat64() implementation that handles
this errata.
Remove the errata handling from the common ksz_r_mib_stat64().
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-6-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz_get_gbit() and ksz_get_xmii() are defined in the ksz_common while
they are only used by the ksz9477 driver.
Move their definition into ksz9477.c
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-5-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz88xx_r_mib_stats64() is defined in ksz_common while it's clearly
ksz88xx-specific.
Move its definition in ksz8.c
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-4-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz_is_port_mac_global_usable() is exposed in ksz_common.h while it's
only used internally.
Make ksz_is_port_mac_global_usable() static.
Move its definition above its first call.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-3-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ksz_max_mtu() is a bit cluttered. It would be good for developers and
reviewers if they didn't need to look at a common function for hardware
they likely don't have, and which is vastly different, when they are
interested in only a specific chip.
Benefit from the fact that all families listed here have their own
dsa_switch_ops, and provide separate implementations for the
port_max_mtu() method.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-2-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Even among the ksz8 family, there are big differences in the MTU change
procedure between KSZ87xx and KSZ88xx (KSZ8463 is like KSZ88xx here).
Since we have 3 separate dsa_switch_ops for what constitutes "KSZ8", we
can split those procedures into separate functions.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260702-clean-ksz-4th-v1-1-93441e695fa4@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
efx_mcdi_init() allocates a logging buffer for MCDI firmware
communication diagnostics.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260701-b4-drivers-ethernet-v1-4-58776615db6e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
efx_siena_mcdi_init() allocates a logging buffer for MCDI firmware
communication diagnostics.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260701-b4-drivers-ethernet-v1-3-58776615db6e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ice_gnss_read() uses get_zeroed_page() to allocate a staging buffer for
reading GNSS module data via I2C bus.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260701-b4-drivers-ethernet-v1-2-58776615db6e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bnx2x_mcast_enqueue_cmd() allocates memory for mac filtering list using
__get_free_pages().
This memory can be allocated with kzalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-ethernet-v1-1-58776615db6e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rmnet_get_endpoint() is shared by packet receive paths and
RTNL-protected control paths. The receive paths already run under RCU/BH
context through the RX handler, while the control paths reach
rmnet_get_endpoint() after obtaining the rmnet port with
rmnet_get_port_rtnl().
The helper walks port->muxed_ep[] with hlist_for_each_entry_rcu(). Pass
lockdep_rtnl_is_held() as the non-RCU protection condition so
CONFIG_PROVE_RCU_LIST can see the RTNL-protected control-path calls
while preserving the existing RCU-reader behavior for data paths.
This was found by our static analysis tool and then manually reviewed
against the current tree. The dynamic triage evidence is a
target-matched CONFIG_PROVE_RCU_LIST warning; the change is limited
to documenting the existing protection contract.
This is a lockdep annotation cleanup. It does not change endpoint
lifetime or hash updates.
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701124017.3205729-1-runyu.xiao@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The GTP PDP lookup helpers are shared by RCU-protected data and report
paths and RTNL-protected control paths such as gtp_genl_new_pdp(). The
helpers walk RCU hlists, but they do not currently pass the RTNL
condition for the control-path lookups.
Pass lockdep_rtnl_is_held() to the PDP hlist iterators. Existing
RCU-reader callers remain valid because the RCU-list macros also accept
an active RCU read-side section; the added condition only documents the
non-RCU protection already used by RTNL control paths.
This was found by our static analysis tool and then manually reviewed
against the current tree. The dynamic triage evidence is a
target-matched CONFIG_PROVE_RCU_LIST warning; the change is limited
to documenting the existing protection contract.
This is a lockdep annotation cleanup. It does not change PDP lifetime or
hash updates.
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260701123925.3193089-1-runyu.xiao@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
REGMAP_MMIO is a hidden (non-user-visible) tristate symbol. Using
depends on it is incorrect because there is no way for the user to
enable it directly. Change to select, which is the convention used
by every other driver in the tree that needs REGMAP_MMIO.
Fixes: 8057cbb8335c ("net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260702032653.1580616-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mm81x is the first Wi-Fi HaLow driver to support the Morse Micro mm81x
chip family via USB and SDIO.
S1G support in the kernel is only new, and as a result this driver has
been scoped to be simple and only support station and AP interface.
The Wi-Fi specific features only cover the minimum required for basic
use such as powersave, aggregation, rate control and so on. The driver
will be extended into the future as S1G support for operations such as
ACS, channel switching and so on are added into the wireless stack.
The driver has been build tested on a long list of architectures and
compilers via Intels LKP.
The driver currently supports IEEE80211-2024 US channels only, with
AU 2020 also available. In order for this to be expanded additional
non-trivial kernel work is required which will begin once the
driver is upstream.
The driver has had many authors who are listed below in
alphabetical order:
Co-developed-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Co-developed-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Co-developed-by: Ayman Grais <ayman.grais@morsemicro.com>
Signed-off-by: Ayman Grais <ayman.grais@morsemicro.com>
Co-developed-by: Bassem Dawood <bassem@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Co-developed-by: Chetan Mistry <chetan.mistry@morsemicro.com>
Signed-off-by: Chetan Mistry <chetan.mistry@morsemicro.com>
Co-developed-by: Dan Callaghan <dan.callaghan@morsemicro.com>
Signed-off-by: Dan Callaghan <dan.callaghan@morsemicro.com>
Co-developed-by: James Herbert <james.herbert@morsemicro.com>
Signed-off-by: James Herbert <james.herbert@morsemicro.com>
Co-developed-by: Sahand Maleki <sahand.maleki@morsemicro.com>
Signed-off-by: Sahand Maleki <sahand.maleki@morsemicro.com>
Co-developed-by: Simon Wadsworth <simon@morsemicro.com>
Signed-off-by: Simon Wadsworth <simon@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
|
|
netif_close_many will soon assert ops lock (for locked DOWN/GOING_DOWN).
Update mtk_eth_set_dma_device to manually grab and release the ops lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260702224150.3730033-4-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The hardware VLAN filter (RFE_CTL_VLAN_FILTER_) drops VLAN-tagged frames
whose VID has not been registered via lan78xx_vlan_rx_add_vid(). It is
left enabled in promiscuous mode, so packet capture (e.g. tcpdump or
Wireshark) does not see tagged frames for unregistered VIDs.
Clear the filter while the interface is promiscuous and restore it from
NETIF_F_HW_VLAN_CTAG_FILTER otherwise. Enforce the same condition in
lan78xx_set_features() so netdev_update_features() cannot re-enable the
filter while promiscuous.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Enrico Pozzobon <enrico.pozzobon@dissecto.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260701-lan78xx-vlan-promisc-v3-1-232266d32743@dissecto.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Lucero Palau, Alejandro says:
====================
pull request: sfc 2026-07-01
here are the last CXL core changes for enabling CXL Type2 drivers to
initialize a CXL-capable device plus the netdev sfc driver changes using
this new CXL core Type2 support.
Please pull or let me know of any problem!
SFC changes for CXL type2 enabling
* tag 'sfc-net-pullrequest-20260630' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
sfc: support pio mapping based on cxl
sfc: obtain and map cxl range using devm_cxl_probe_mem
sfc: Initialize cxl dpa
sfc: Map cxl regs
sfc: add cxl support
cxl: Support dpa without a mailbox
cxl: Support Type2 cxl regs mapping
====================
Link: https://patch.msgid.link/20260701113805.14072-1-alejandro.lucero-palau@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"queue_map" is a pointer to "u32" and is not modified by the
ppe_ring_queue_map_set() function, thus can be made a pointer to const to
indicate that function is treating the pointed value read-only. This in
general makes the code easier to follow and a bit safer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702094908.79859-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no benefit in marking "const" a pass-by-value (not a pointer)
function argument, because it is passed as a copy on the stack. No code
readability improvements, no additional compiler-time safety for misuse.
Drop such redundant "const".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702094908.79859-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Up to now, rate groups could only contain vports from the same E-Switch.
This patch relaxes that restriction if the device supports it
(HCA_CAP.esw_cross_esw_sched == true) and the right conditions are met:
- Link Aggregation (LAG) is enabled.
- The E-Switches are from the same shared devlink device.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-13-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
E-Switch QoS domains were added with the intention of eventually
implementing shared qos domains to support cross-esw scheduling in the
previous approach ([1]), but they are no longer necessary in the new
approach.
Remove QoS domains and switch to using the shd lock for protecting
against concurrent QoS modifications.
Enable the supported_cross_device_rate_nodes devlink ops attribute so
that all calls originating from devlink rate acquire the shd lock. Only
the additional entry points into QoS need to acquire the shd lock.
The wrinkle is that since shd can be NULL (e.g. on older HW without
serial number available), there needs to be a fallback locking
mechanism. The devlink instance lock cannot be used, as some code paths
into QoS (get, set & modify vport rate) happen with RTNL held, and the
existing devlink -> RTNL order prevents devlink lock usage there.
The other two options are either esw->state_lock or a new lock as
fallback when shd is NULL. This patch adds esw->state_lock, which
implies:
- 3 new lock/unlock helper pairs to acquire/release the missing lock:
- esw_qos_{,un}lock: acquire/release esw->state_lock when shd is NULL.
- esw_qos_shd_{,un}lock: when esw->state_lock is already held.
- esw_qos_devlink_{,un}lock: when shd is already held.
- esw_assert_qos_lock_held now asserts esw->state_lock is held when shd
is NULL.
Use the corresponding lock/unlock function in all places where either
shd or state_lock would need to be acquired.
Document all of this trickery next to esw_assert_qos_lock_held.
Enabling supported_cross_device_rate_nodes now is safe, because
mlx5_esw_qos_vport_update_parent rejects cross-esw parent updates.
This will change in the next patch.
[1]
https://lore.kernel.org/netdev/20250213180134.323929-1-tariqt@nvidia.com/
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-12-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit [1] the concept of the root node in the qos hierarchy was
removed due to a bug with how tx_share worked. The side effect is that
in many places, there are now corner cases related to parent handling.
However, since that change, support for tc_bw was added and now, with
upcoming cross-esw support, the code is about to become even more
complicated, increasing the number of such corner cases.
Bring back the concept of the root node, to which all esw vports and
nodes are connected to. This benefits multiple operations which can
assume there's always a valid parent and don't have to do ternary
gymnastics to determine the correct esw to talk to.
As side effect, there's no longer a need to store the groups in the
qos domain, since normalization can simply iterate over all children of
the root node. Normalization gets simplified as a result.
There should be no functionality changes as a result of this change.
[1] commit 330f0f6713a3 ("net/mlx5: Remove default QoS group and attach
vports directly to root TSAR")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-11-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Qos cleanup is a complex affair, because of the two modes of operation
(legacy and switchdev).
Leaf QoS is removed:
1. In legacy mode by esw_vport_cleanup() -> mlx5_esw_qos_vport_disable()
2. In switchdev mode by mlx5_esw_offloads_devlink_port_unregister() ->
mlx5_esw_qos_vport_update_parent(). A little later in the same flow, the
calls in 1 happen but they are noops.
Zooming out a bit, from both mlx5_eswitch_disable_locked() and
mlx5_eswitch_disable_sriov() the leaves are destroyed before the nodes,
which is the reverse of what should be.
For SFs there's no devl_rate_nodes_destroy() call to unparent the
affected leaf.
Sanitize all of this by:
1. Destroying nodes before leaves in both legacy and switchdev mode.
2. Only removing vport qos from esw_vport_cleanup(), reachable from both
legacy and switchdev and also reachable by SF removal.
3. Unexpose mlx5_esw_qos_vport_update_parent(), which becomes internal
to qos.
4. Remove the WARN in mlx5_esw_qos_vport_disable().
This also takes care of a theoretical corner case, when
mlx5_esw_qos_vport_update_parent() tried to reattach the vport to
the original parent on failure, which can fail as well, leaving the
vport in a broken state.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-10-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously, the master device of the uplink netdev was queried for its
maximum link speed from the QoS layer, requiring the uplink_netdev mutex
and possibly the RTNL (if the call originated from the TC matchall
layer).
Acquiring these locks here is risky, as lock cycles could form. The
locking for the QoS layer is about to change, so to avoid issues,
replace the code querying the LAG's max link speed with the existing
infrastructure added in commit [1].
This simplifies this part and avoids potential lock cycles.
One caveat is that there's a new edge case, when the bond device is not
fully formed to represent the LAG device, the speed isn't calculated and
is left at 0. This now handled explicitly.
[1] commit f0b2fde98065 ("net/mlx5: Add support for querying bond
speed")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup.
Fixes: ca6139ffc67ee ("liquidio CN23XX: sysfs VF config support")
Fixes: 8c978d059224 ("liquidio CN23XX: Mailbox support")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260701040847.1897845-1-dbgh9129@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rnpgbe mailbox exchanges data through 32-bit MMIO registers in
little-endian wire format. The original code had two problems:
1. FW structs (with __le16/__le32 fields) were cast to (u32 *)
before reaching the mailbox transport, hiding the endian
annotations from sparse.
2. No cpu_to_le32()/le32_to_cpu() conversion was done between
CPU-endian MMIO values and the little-endian payload, causing
data corruption on big-endian systems.
Fix by adding the missing byte-order conversions in the transport
layer and introducing union wrappers (mbx_fw_cmd_req_u,
mbx_fw_cmd_reply_u) that overlay each FW struct with a __le32
dwords[] array. Callers fill named fields using cpu_to_le16/32(),
then pass dwords[] to the transport, which now takes explicit
__le32 * instead of u32 *. This eliminates all pointer casts on
the mailbox data path and lets sparse verify the conversions.
Fixes: 4543534c3ef5 ("net: rnpgbe: Add basic mbx ops support")
Signed-off-by: Dong Yibo <dong100@mucse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260701032208.1843156-2-dong100@mucse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy.
Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Link: https://lore.kernel.org/r/178214417708.2368577.16740907093694208834@maoyixie.com
Cc: stable@vger.kernel.org
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260627131313.3878893-1-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211_hwsim_stop() drops any frames left in data->pending. The loop
currently checks skb_queue_empty() and then dequeues separately.
That split is racy with TX status handling, which can remove a pending
frame under the queue lock. If the last entry is removed after the empty
check, skb_dequeue() returns NULL and the stop path passes that NULL skb
to ieee80211_free_txskb().
Use skb_dequeue() as the loop condition instead. The dequeue result is the
object that stop owns and frees, and a concurrent status completion that
empties the queue simply makes the loop terminate.
Fixes: bd18de517923 ("mac80211_hwsim: drop pending frames on stop")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260706161822.921039-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211_hwsim_free() removes each radio from hwsim_radios before calling
mac80211_hwsim_del_radio(), but leaves the matching hwsim_radios_rht entry
in place until the whole table is destroyed.
Other radio removal paths remove both the list entry and data->rht while
holding hwsim_radio_lock, before dropping the lock and deleting the radio.
Do the same here so the all-radio cleanup path follows the same object
visibility ordering.
This helper is used while all radios are being torn down, either after
callback users have already been unregistered or while module init is
unwinding, so no hwsim_radios_generation update is needed.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260706123756.343818-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack.
Fixes: 9982464379e8 ("brcmfmac: make sdio suspend wait for threads to freeze")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260619064401.1048976-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rsi_prepare_beacon() copies the mac80211 beacon frame after
FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller
than MAX_MGMT_PKT_SIZE after alignment.
Validate the beacon length against the actual tailroom before the copy
and skb_put(). Leave ownership of the management skb with the caller on
error, matching the existing rsi_send_beacon() cleanup path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705084824.68105-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in
both the software-decrypt key selection path and the hardware-decrypted
IV/ICV strip path. In both places the existing guard only checks
skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the
byte at hdrlen + 3.
Require hdrlen + 4 bytes before reading that item in both paths. This is
a local source-boundary check only; it does not change the key index
semantics.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705083519.23567-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rsi_send_bgscan_probe_req() allocates room for struct
rsi_bgscan_probe plus MAX_BGSCAN_PROBE_REQ_LEN bytes, but copies the
entire mac80211-generated probe request skb after the fixed header.
The probe request length depends on scan IEs and is not checked
against the fixed firmware buffer.
Reject generated probe requests that do not fit the firmware command
buffer before copying them into the skb.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011231.45593-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011140.37639-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
I have an hostapd setup with a
01:00.0 Network controller: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
The setup work fine on 6.18.26-gentoo
It breaks on 6.18.33-gentoo (and still broken on 6.18.37)
I found an hint in dmesg:
On 6.18.26-gentoo I see:
May 31 15:48:45 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
On 6.18.33-gentoo I see:
May 31 15:22:57 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0006 detected
The RF chipset seems badly detected.
The problem was the EEPROM which was badly initialized.
Probably the origin was in some PCI change but unfortunately I couldn't play
to bisect/reboot often the board with this card to do it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260703134932.3786771-1-clabbe@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and
data[24] whenever key data is present. Those offsets are only part of
the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as
CCMP, do not provide those bytes, so the unconditional copies can read
past the supplied key buffer.
Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are
shorter than the expected 32-byte layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260701053414.34015-1-pengpeng@iscas.ac.cn
[drop useless length check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying.
Fixes: 7cb770729ba8 ("p54: move eeprom code into common library")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260628000510.4152481-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Injected HT and VHT rates store an MCS value in rates[0].idx rather
than an index into the legacy bitrate table. hwsim nevertheless passes
these rates to ieee80211_get_tx_rate() while generating monitor frames
and timestamps.
A crafted injected frame can therefore read beyond the bitrate table.
If the resulting bitrate is zero, mac80211_hwsim_write_tsf() also
divides by zero, as observed by syzbot.
Use ieee80211_get_tx_rate() only for legacy rates. The existing fallback
continues to supply a conservative bitrate where hwsim does not yet
calculate MCS rates.
Reported-by: syzbot+21629c14aa749636db9d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=21629c14aa749636db9d
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628002537.23550-1-alhouseenyousef@gmail.com
[drop wrong Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed.
Fixes: 1dfba3060fe7 ("libertas: move firmware lifetime handling to firmware.c")
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260624085343.575508-1-dawei.feng@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
