| Age | Commit message (Collapse) | Author |
|---|
|
The driver currently uses page_pool_put_page() to recycle
page pool pages. Since gve uses split pages, if the fragment
being recycled is not the last fragment in the page, there
is no dma sync operation. When the last fragment is recycled,
dma sync is performed by page pool infra according to the
value passed as dma_sync_size which right now is set to the
size of fragment.
But the correct thing to do is to dma sync the entire page when
the last fragment is recycled. Hence change to using
page_pool_put_full_page().
Link: https://lore.kernel.org/netdev/89d7ce83-cc1d-4791-87b5-6f7af29a031d@huawei.com/
Suggested-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode")
Link: https://patch.msgid.link/20241023221141.3008011-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move mbox, hw resources and interrupt configuration functions to common
header file. So, that they can be used later by the RVU representor driver.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-5-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reuse the maximum support HW MTU value that is fetch during probe.
Instead of fetching through mbox each time mtu is changed as the
value is fixed for interface.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-4-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the queue(RX/TX/CQ) memory allocation and free code to single APIs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-3-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new API "otx2_init_rsrc" and move the HW blocks
NIX/NPA resources configuration code under this API. So, that
it can be used by the RVU representor driver that has similar
resources of RVU NIC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-2-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Debugging certain flows in the offloaded switch data path can be done by
installing two tc-mirred filters for mirroring: one in the hardware data
path, which copies the frames to the CPU, and one which takes the frame
from there and mirrors it to a virtual interface like a dummy device,
where it can be seen with tcpdump.
The effect of having 2 filters run on the same packet can be obtained by
default using tc, by not specifying either the 'skip_sw' or 'skip_hw'
keywords.
Instead of refusing to offload mirroring/redirecting packets towards
interfaces that aren't switch ports, just treat every other destination
for what it is: something that is handled in software, behind the CPU
port.
Usage:
$ ip link add dummy0 type dummy; ip link set dummy0 up
$ tc qdisc add dev swp0 clsact
$ tc filter add dev swp0 ingress protocol ip flower action mirred ingress mirror dev dummy0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes for v6.12-rc6
Another set of fixes, mostly iwlwifi:
* fix infinite loop in 6 GHz scan if more than
255 colocated APs were reported
* revert removal of retry loops for now to work
around issues with firmware initialization on
some devices/platforms
* fix SAR table issues with some BIOSes
* fix race in suspend/debug collection
* fix memory leak in fw recovery
* fix link ID leak in AP mode for older devices
* fix sending TX power constraints
* fix link handling in FW restart
And also the stack:
* fix setting TX power from userspace with the new
chanctx emulation code for old-style drivers
* fix a memory corruption bug due to structure
embedding
* fix CQM configuration double-free when moving
between net namespaces
* tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx
wifi: iwlwifi: mvm: fix 6 GHz scan construction
wifi: cfg80211: clear wdev->cqm_config pointer on free
mac80211: fix user-power when emulating chanctx
Revert "wifi: iwlwifi: remove retry loops in start"
wifi: iwlwifi: mvm: don't add default link in fw restart flow
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
wifi: iwlwifi: mvm: SAR table alignment
wifi: iwlwifi: mvm: Use the sync timepoint API in suspend
wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd
wifi: iwlwifi: mvm: don't leak a link on AP removal
====================
Link: https://patch.msgid.link/20241029093926.13750-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes an inconsistent indenting introduced with e3fc5139bd8f
("r8169: implement additional ethtool stats ops").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410220413.1gAxIJ4t-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20fd6f39-3c1b-4af0-9adc-7d1f49728fad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for new chip version RTL8125D, which can be found on
boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
for this chip version is available in linux-firmware already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024195534.176410-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024195833.176843-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to
clarify the EQE polling logic. This consolidates the next_eqe_sw() calls
for the first and subequent iterations. It also avoids a goto. Turn the
num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023205113.255866-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"enahnced" looks to be a misspelling of "enhanced".
Rename "mlx5_cqwq_get_cqe_enahnced_comp" to
"mlx5_cqwq_get_cqe_enhanced_comp".
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241023164840.140535-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022233203.9670-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
They are the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022203240.391648-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consolidate the handling of dedicated PHY and fixed-link phy by taking
advantage of logic in of_phy_get_and_connect() which handles both of
these cases, rather than open coding the same logic in ftgmac100_probe().
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241022084214.1261174-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a few issues with how SFP PHYs are attached:
a) The phylink_sfp_connect_phy() and phylink_sfp_config_phy() code
validates the configuration three times:
1. To discover the support/advertising masks that the PHY/PCS/MAC
can support in order to select an interface.
2. To validate the selected interface.
3. When the PHY is brought up after being attached, another validation
is done.
This is needlessly complex.
b) The configuration is set prior to the PHY being attached, which
means we don't have the PHY available in phylink_major_config()
for phylink_pcs_neg_mode() to make decisions upon.
We have already added an extra step to validate the selected interface,
so we can now move the attachment and bringup of the PHY earlier,
inside phylink_sfp_config_phy(). This results in the validation at
step 2 above becoming entirely unnecessary, so remove that too.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcb-000c8H-3e@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate that the returned interface from sfp_select_interface() is
supportable by the MAC/PCS. If it isn't, print an error and return
the NA interface type. This is a preparatory step to reorganising
how a PHY on a SFP module is handled.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcV-000c8B-Vz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever we call sfp_select_interface(), we check the returned value
and print an error. There are two cases where this happens with the
same message. Provide a common function to do this.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcQ-000c85-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_parse_fixedlink() wants to preserve the pause, asym_pause and
autoneg bits in pl->supported. Rather than reading the bits into
separate bools, zeroing pl->supported, and then setting them if they
were previously set, use a mask and linkmode_and() to achieve the same
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1t3Fh5-000aQi-Nk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Quectel RG650V which is based on Qualcomm SDX65 chip.
The composition is DIAG / NMEA / AT / AT / QMI.
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0122 Rev=05.15
S: Manufacturer=Quectel
S: Product=RG650V-EU
S: SerialNumber=xxxxxxx
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024151113.53203-1-benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the ring size changes successfully, trigger
netdev_update_features() to enable features in wanted state if
applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ethtool --set-ring eth1 rx 1024
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MTU changes successfully, trigger netdev_update_features() to
enable features in wanted state if applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ip link set dev eth1 mtu 7000
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
E.g. clang-18 says:
drivers/net/wwan/wwan_core.c:442:34: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
442 | return dev_set_name(&port->dev, buf);
| ^~~
drivers/net/wwan/wwan_core.c:442:34: note: treat the string as an argument to avoid this
442 | return dev_set_name(&port->dev, buf);
| ^
| "%s",
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241023-wwan-fmt-v1-1-521b39968639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_nexthop_bucket_activity_write()
This was found by a static analyzer.
We should not forget the trailing zero after copy_from_user()
if we will further do some string operations, sscanf() in this
case. Adding a trailing zero will ensure that the function
performs properly.
Fixes: c6385c0b67c5 ("netdevsim: Allow reporting activity on nexthop buckets")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241022171907.8606-1-zichenxie0106@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing user space applications maintained by the Osmocom project are
breaking since a recent fix that addresses incorrect error checking.
Restore operation for user space programs that specify -1 as file
descriptor to skip GTPv0 or GTPv1 only sockets.
Fixes: defd8b3c37b0 ("gtp: fix a potential NULL pointer dereference")
Reported-by: Pau Espin Pedrol <pespin@sysmocom.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Oliver Smith <osmith@sysmocom.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022144825.66740-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Cc: stable@vger.kernel.org
Reported-by: Dung Cao <dung@os.amperecomputing.com>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022-mctp-i2c-null-dest-v3-1-e929709956c5@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On this Cisco MX60W, u-boot sets the local-mac-address property.
Unfortunately by default, the MAC is wrong and is actually located on a
UBI partition. Which means nvmem needs to be used to grab it.
In the case where that fails, EMAC fails to initialize instead of
generating a random MAC as many other drivers do.
Match behavior with other drivers to have a working ethernet interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It seems since inception that mutex_destroy was never called for these
in _remove. Instead of handling this manually, just use devm for
simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No need for irq_of_parse_and_map since we have platform_device.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No need to have a struct resource. Gets rid of the TODO.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Small rx improvement. Would use napi_gro_receive instead but that's a
lot more involved than netif_receive_skb_list because of how the
function is implemented.
Before:
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 51556 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 559 MBytes 467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 48228 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.03 sec 558 MBytes 467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 47600 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 557 MBytes 466 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 37252 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 559 MBytes 467 Mbits/sec
After:
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 40786 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 572 MBytes 478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 52482 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 571 MBytes 477 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 48370 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 572 MBytes 478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 46086 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 571 MBytes 476 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 46062 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 572 MBytes 478 Mbits/sec
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
<TASK>
? __warn+0x83/0x130
? dpll_pin_get+0x2c4/0x330
? report_bug+0x1b7/0x1d0
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? dpll_pin_get+0x117/0x330
? dpll_pin_get+0x2c4/0x330
? dpll_pin_get+0x117/0x330
ice_dpll_get_pins.isra.0+0x52/0xe0 [ice]
...
The number of dpll pins enabled by LOM vendor is greater than expected
and defined in the driver for Intel designed NICs, which causes the crash.
Prevent the crash and allow generic pin initialization within Linux DPLL
subsystem for DPLL enabled E810 LOM designs.
Newly designed solution for described issue will be based on "per HW
design" pin initialization. It requires pin information dynamically
acquired from the firmware and is already in progress, planned for
next-tree only.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no support for SF in legacy mode. Reflect it in the code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: eda69d654c7e ("ice: add basic devlink subfunctions support")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During testing of SR-IOV, Red Hat QE encountered an issue where the
ip link up command intermittently fails for the igbvf interfaces when
using the PREEMPT_RT variant. Investigation revealed that
e1000_write_posted_mbx returns an error due to the lack of an ACK
from e1000_poll_for_ack.
The underlying issue arises from the fact that IRQs are threaded by
default under PREEMPT_RT. While the exact hardware details are not
available, it appears that the IRQ handled by igb_msix_other must
be processed before e1000_poll_for_ack times out. However,
e1000_write_posted_mbx is called with preemption disabled, leading
to a scenario where the IRQ is serviced only after the failure of
e1000_write_posted_mbx.
To resolve this, we set IRQF_NO_THREAD for the affected interrupt,
ensuring that the kernel handles it immediately, thereby preventing
the aforementioned error.
Reproducer:
#!/bin/bash
# echo 2 > /sys/class/net/ens14f0/device/sriov_numvfs
ipaddr_vlan=3
nic_test=ens14f0
vf=${nic_test}v0
while true; do
ip link set ${nic_test} mtu 1500
ip link set ${vf} mtu 1500
ip link set $vf up
ip link set ${nic_test} vf 0 vlan ${ipaddr_vlan}
ip addr add 172.30.${ipaddr_vlan}.1/24 dev ${vf}
ip addr add 2021:db8:${ipaddr_vlan}::1/64 dev ${vf}
if ! ip link show $vf | grep 'state UP'; then
echo 'Error found'
break
fi
ip link set $vf down
done
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Reported-by: Yuying Ma <yuma@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a
Reported-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Fixes: f748be531d70 ("stmmac: support new GMAC4")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021061023.2162701-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
register values
The high address will display as 0 if the driver does not set the
reg_space[]. To fix this, read the high address registers and
update the reg_space[] accordingly.
Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021054625.1791965-1-leyfoon.tan@starfivetech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The RTL8812AU has a reception problem, maybe only in the 5 GHz band.
Sometimes, in some positions, it stops receiving anything even though
the distance to the AP is only ~3 meters and there are no obstacles.
Moving it a few centimeters fixes it.
Switch the initial gain to maximum coverage when there is beacon loss.
This only helps sometimes. This is similar to what the official driver
does.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/203f5043-4fe1-4f35-8b8f-d3b6f44e1fd9@gmail.com
|
|
The RTL8821AU firmware sends C2H_BT_INFO by itself when bluetooth
headphones are connected, but not when they are disconnected. This leads
to the coexistence code still using the A2DP algorithm long after the
headphones are disconnected, which means the wifi speeds are much lower
than they should be. Work around this by asking for updates every two
seconds if the chip is RTL8821AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/358acdd2-6aae-46c1-9c66-fcce4e700b96@gmail.com
|
|
All the chips currently supported have a "scoreboard": the chip keeps
track of certain things related to bluetooth, for example, whether
bluetooth is active. The information can be read from register 0xaa.
RTL8821AU doesn't have this. Implement bluetooth activity detection in
rtw_coex_monitor_bt_enable() based on the bluetooth TX/RX counters.
This is mostly important for RTL8811AU, the version of RTL8821AU without
bluetooth. Without this change, the driver thinks bluetooth is active
and the wifi speeds are low.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5058f23d-2086-42cd-82ad-eef31a348467@gmail.com
|
|
The driver is supposed to avoid entering LPS (power saving) when there
is beacon loss, but only RTL8822C detects the beacon loss (because it
has beacon filtering in the firmware).
Detect beacon loss with the other chips by checking if we received less
than half the expected number of beacons in the last 2-second interval.
This gets rid of the occasional "failed to get tx report from firmware"
warnings with RTL8821AU. It may also avoid some disconnections.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/f52b2fcf-bf94-48bc-89bd-e55ebc3a2f2d@gmail.com
|
|
"ls" meaning "last segment". Without this RTL8812AU can't upload the
reserved page in USB 2 mode. (Somehow it's fine in USB 3 mode.)
Also tested with RTL8822CU, RTL8812BU, RTL8811CU, RTL8723DU, RTL8811AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e443f5d9-4b53-4f64-985c-64313ec80bef@gmail.com
|
|
RTL8812AU uses one set of TX power tracking tables for RFE 3, and
another set for everything else.
Move pwr_track_tbl from struct rtw_chip_info to struct rtw_rfe_def in
order to load the right set of tables for each RFE (RF front end) type.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/904d0ab1-c046-40cd-a3a3-d4fdcf663c9d@gmail.com
|
|
All the chips supported so far have a TX page size of 128 bytes.
Change the type of the page_size member of struct rtw_chip_info from u8
to u16 in order to support RTL8821AU (page size of 256 bytes) and
RTL8812AU (page size of 512 bytes). Also change the types of several
related variables and function parameters from u8 to u16.
The TX page size is used, among other things, to construct the beacon,
null data, QOS null data, and PS poll templates which are uploaded to
the chip's reserved page. Each template needs to be aligned on a
multiple of the TX page size. Power saving can't work if the TX page
size is wrong.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/acdefbb1-3daf-4349-9e03-9472754d5f1e@gmail.com
|
|
txagc_remnant_ofdm member of struct rtw_dm_info should be different for
each RF path, so make it an array of size RTW_RF_PATH_MAX (4).
Until now all the chips using this had only one RF path, but RTL8812AU
has two, and RTL8814AU has four.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/68571ba9-e504-4b2d-bfa1-62f468753649@gmail.com
|
|
RTL8811AU fails to perform the 4-way handshake when the AP is too far
because it transmits the EAPOL frames at MCS9 and when that doesn't
work it retries 48 times with the same rate, to no avail.
Retrying 48 times with the same rate seems pointless. Set the
appropriate field in the TX descriptor to allow it to use lower rates
when retrying.
Set it for RTL8723D and RTL8703B because they interpret this field the
same way as RTL8811A.
The newer RTL8822C, RTL8822B, RTL8821C seem to interpret this field in
the TX descriptor differently, so leave it alone for those chips.
Tested with RTL8811AU and RTL8723DU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/2b3e3e6f-541b-4a3b-8ca3-65b267e6a95a@gmail.com
|
|
RTL8821AU and RTL8812AU have to do some things differently, so let
them have full control.
The other chips use the same functions as before.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/98ab839f-9100-44ae-9551-9af743a4aa3a@gmail.com
|
