| Age | Commit message (Collapse) | Author |
|---|
|
This new variable tracks the total length of the data to be sent,
encompassing both the message body (msgbody) and userdata, which is
collectively called body.
By explicitly defining body_len, the code becomes clearer and easier to
reason about, simplifying offset calculations and improving overall
readability of the function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the introduction of the userdata concept, the term body has become
ambiguous and less intuitive.
To improve clarity, body is renamed to msg_body, making it clear that
the body is not the only content following the header.
In an upcoming patch, the term body_len will also be revised for further
clarity.
The current packet structure is as follows:
release, header, body, [msg_body + userdata]
Here, [msg_body + userdata] collectively forms what is currently
referred to as "body." This renaming helps to distinguish and better
understand each component of the packet.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Following the previous change, where the non-fragmented case was moved
to its own function, this update introduces a new function called
send_msg_fragmented to specifically manage scenarios where message
fragmentation is required.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The send_ext_msg_udp() function has become quite large, currently
spanning 102 lines. Its complexity, along with extensive pointer and
offset manipulation, makes it difficult to read and error-prone.
The function has evolved over time, and it’s now due for a refactor.
To improve readability and maintainability, isolate the case where no
message fragmentation occurs into a separate function, into a new
send_msg_no_fragmentation() function. This scenario covers about 95% of
the messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Variable msg_ready is useless, since it does not represent anything. Get
rid of it, using buf directly instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Greg Thelen <gthelen@google.com>
Diagnosed-by: John Sperbeck <jsperbeck@google.com>
Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC")
Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is meant to use xa_err() to extract the error encoded in the return
value of xa_store().
Fixes: 44c2fbebe18a ("mlxsw: spectrum_router: Share nexthop counters in resilient groups")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241017023223.74180-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Report MDI-X resolved state after link up.
Tested on Linkstreet 88E6193X internal PHYs.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241017015026.255224-1-paul.davey@alliedtelesis.co.nz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently reset state configuration of split header works fine for
non-tagged packets and we see no corruption in payload of any size
We need additional programming sequence with reset configuration to
handle VLAN tagged packets to avoid corruption in payload for packets
of size greater than 256 bytes.
Without this change ping application complains about corruption
in payload when the size of the VLAN packet exceeds 256 bytes.
With this change tagged and non-tagged packets of any size works fine
and there is no corruption seen.
Current configuration which has the issue for VLAN packet
----------------------------------------------------------
Split happens at the position at Layer 3 header
|MAC-DA|MAC-SA|Vlan Tag|Ether type|IP header|IP data|Rest of the payload|
2 bytes ^
|
With the fix we are making sure that the split happens now at
Layer 2 which is end of ethernet header and start of IP payload
Ip traffic split
-----------------
Bits which take care of this are SPLM and SPLOFST
SPLM = Split mode is set to Layer 2
SPLOFST = These bits indicate the value of offset from the beginning
of Length/Type field at which header split should take place when the
appropriate SPLM is selected. Reset value is 2bytes.
Un-tagged data (without VLAN)
|MAC-DA|MAC-SA|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Tagged data (with VLAN)
|MAC-DA|MAC-SA|VLAN Tag|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Non-IP traffic split such AV packet
------------------------------------
Bits which take care of this are
SAVE = Split AV Enable
SAVO = Split AV Offset, similar to SPLOFST but this is for AVTP
packets.
|Preamble|MAC-DA|MAC-SA|VLAN tag|Ether type|IEEE 1722 payload|CRC|
2bytes ^
|
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016234313.3992214-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As preparation for HW Steering support, rename modify header struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As preparation for HW Steering support, rename packet reformat struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, when VFs are created, two flow tables are added for the eswitch:
the "fdb" table, which contains rules for each VF and the "vepa_fdb" table.
In the default VEB mode, the vepa_fdb table is empty. When switching to
VEPA mode, flow steering rules are added to vepa_fdb. Even though the
vepa_fdb table is empty in VEB mode, its presence adds some cost to packet
processing. In some workloads, this leads to drops which are reported by
the rx_discards_phy ethtool counter.
In order to improve performance, only create vepa_fdb when in VEPA mode.
Tests were done on a ConnectX-6 Lx adapter forwarding 64B packets between
both ports using dpdk-testpmd. Numbers are Rx-pps for each port, as
reported by testpmd.
Without changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35257998,35264499
numvfs=1,1
24590124,24590888
testpmd on VF with numvfs=1,1
20434338,20434887
traffic to VF mac
testpmd on VF with numvfs=1,1
30341014,30340749
With changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35404361,35383378
numvfs=1,1
29801247,29790757
testpmd on VF with numvfs=1,1
24310435,24309084
traffic to VF mac
testpmd on VF with numvfs=1,1
34811436,34781706
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On sync reset flow, firmware may request a PF, which already
acknowledged the unload event, to move to drop mode. Drop mode means
that this PF will reduce polling frequency, as this PF is not going to
have another active part in the reset, but only reload back after the
reset.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor QoS normalization and rate calculation functions to operate
on mlx5_esw_sched_node, allowing for generalized handling of both
vports and nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simplify the configuration of QoS scheduling elements by removing the
separate functions `esw_qos_node_config` and `esw_qos_vport_config`.
Instead, directly use the existing `esw_qos_sched_elem_config` function
for both nodes and vports.
This unification helps in generalizing operations on scheduling
elements nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove the `enabled` flag from the `vport->qos` struct, as QoS now
relies solely on the `sched_node` pointer to determine whether QoS
features are in use.
Currently, the vport `qos` struct consists only of the `sched_node`,
introducing an unnecessary two-level reference. However, the qos struct
is retained as it will be extended in future patches to support new QoS
features.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the vport QoS structure by moving group membership and
scheduling details into the `mlx5_esw_sched_node` structure.
This change consolidates the vport into the rate hierarchy by unifying
the handling of different types of scheduling element nodes.
In addition, add a direct reference to the mlx5_vport within the
mlx5_esw_sched_node structure, to ensure that the vport is easily
accessible when a scheduling node is associated with a vport.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Modify the vport scheduling element creation function to get the parent
node directly, aligning it with the group creation function.
This ensures a consistent flow for scheduling elements creation, as the
parent nodes already contain the device and parent element index.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce the `mlx5_esw_sched_node` struct, consolidating all rate
hierarchy related details, including membership and scheduling
parameters.
Since the group concept aligns with the `mlx5_esw_sched_node`, replace
the `mlx5_esw_rate_group` struct with it and rename the "group"
terminology to "node" throughout the rate hierarchy.
All relevant code paths and structures have been updated to use the
"node" terminology accordingly, laying the groundwork for future
patches that will unify the handling of different types of members
within the rate hierarchy.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename the `group` field in the `mlx5_vport` structure to `parent` to
clarify the vport's role as a member of a parent group and distinguish
it from the concept of a general group.
Additionally, rename `group_entry` to `parent_entry` to reflect this
update.
This distinction will be important for handling more complex group
structures and scheduling elements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update the logic for adding rate groups to the E-Switch domain list,
ensuring only groups with the root Transmit Scheduling Arbiter as their
parent are included.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a `parent` field in the `mlx5_esw_rate_group` structure to
support hierarchical group relationships.
The `parent` can reference another group or be set to `NULL`,
indicating the group is connected to the root TSAR.
This change enables the ability to manage groups in a hierarchical
structure for future enhancements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce the `sched_node_type` enum to represent both the group and
its members as scheduling nodes in the rate hierarchy.
Add the `type` field to the rate group structure to specify the type of
the node membership in the rate hierarchy.
Generalize comments to reflect this flexibility within the rate group
structure.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce `esw_qos_create_group_sched_elem` to handle the creation of
group scheduling elements for E-Switch QoS, Transmit Scheduling
Arbiter (TSAR).
This reduces duplication and simplifies code for TSAR setup.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Static analysis on linux-next has detected the following issue
in function virtnet_stats_ctx_init, in drivers/net/virtio_net.c :
if (vi->device_stats_cap & VIRTIO_NET_STATS_TYPE_CVQ) {
queue_type = VIRTNET_Q_TYPE_CQ;
ctx->bitmap[queue_type] |= VIRTIO_NET_STATS_TYPE_CVQ;
ctx->desc_num[queue_type] += ARRAY_SIZE(virtnet_stats_cvq_desc);
ctx->size[queue_type] += sizeof(struct virtio_net_stats_cvq);
}
ctx->bitmap is declared as a u32 however it is being bit-wise or'd with
VIRTIO_NET_STATS_TYPE_CVQ and this is defined as 1 << 32:
include/uapi/linux/virtio_net.h:#define VIRTIO_NET_STATS_TYPE_CVQ (1ULL << 32)
..and hence the bit-wise or operation won't set any bits in ctx->bitmap
because 1ULL < 32 is too wide for a u32.
In fact, the field is read into a u64:
u64 offset, bitmap;
....
bitmap = ctx->bitmap[queue_type];
so to fix, it is enough to make bitmap an array of u64.
Fixes: 941168f8b40e5 ("virtio_net: support device stats")
Reported-by: "Colin King (gmail)" <colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/53e2bd6728136d5916e384a7840e5dc7eebff832.1729099611.git.mst@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue.
Fixes: 88b710532e53 ("wwan: add interface creation support")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015131621.47503-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a Makefile and update Kconfig to build hibmcge driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the .get_drvinfo .get_link .get_link_ksettings to get
the basic information and working status of the driver.
Implement the .set_link_ksettings to modify the rate, duplex,
and auto-negotiation status.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement rx_poll function to read the rx descriptor after
receiving the rx interrupt. Adjust the skb based on the
descriptor to complete the reception of the packet.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused, and .ndo_tx_timeout function to print some
information when the hardware is busy.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the .ndo_open() .ndo_stop() .ndo_set_mac_address()
and .ndo_change_mtu functions().
And .ndo_validate_addr calls the eth_validate_addr function directly
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver supports four interrupts: TX interrupt, RX interrupt,
mdio interrupt, and error interrupt.
Actually, the driver does not use the mdio interrupt.
Therefore, the driver does not request the mdio interrupt.
The error interrupt distinguishes different error information
by using different masks. To distinguish different errors,
the statistics count is added for each error.
To ensure the consistency of the code process, masks are added for the
TX interrupt and RX interrupt.
This patch implements interrupt request, and provides a
unified entry for the interrupt handler function. However,
the specific interrupt handler function of each interrupt
is not implemented currently.
Because of pcim_enable_device(), the interrupt vector
is already device managed and does not need to be free actively.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implements the C22 read and write PHY registers interfaces.
Some hardware interfaces related to the PHY are also implemented
in this patch.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for to read and write registers through the pic bar space.
Some driver parameters, such as mac_id, are determined by the
board form. Therefore, these parameters are initialized
from the register as device specifications.
the device specifications register are initialized and written by bmc.
driver will read these registers when loading.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add pci table supported in this module, and implement pci_driver function
to initialize this driver.
hibmcge is a passthrough network device. Its software runs
on the host side, and the MAC hardware runs on the BMC side
to reduce the host CPU area. The software interacts with the
MAC hardware through the PCIe.
┌─────────────────────────┐
│ HOST CPU network device │
│ ┌──────────────┐ │
│ │hibmcge driver│ │
│ └─────┬─┬──────┘ │
│ │ │ │
│HOST ┌───┴─┴───┐ │
│ │ PCIE RC │ │
└──────┴───┬─┬───┴────────┘
│ │
PCIE
│ │
┌──────┬───┴─┴───┬────────┐
│ │ PCIE EP │ │
│BMC └───┬─┬───┘ │
│ │ │ │
│ ┌────────┴─┴──────────┐ │
│ │ GE │ │
│ │ ┌─────┐ ┌─────┐ │ │
│ │ │ MAC │ │ MAC │ │ │
└─┴─┼─────┼────┼─────┼──┴─┘
│ PHY │ │ PHY │
└─────┘ └─────┘
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mac_probe() there are multiple calls to of_find_device_by_node(),
fman_bind() and fman_port_bind() which takes references to of_dev->dev.
Not all references taken by these calls are released later on error path
in mac_probe() and in mac_remove() which lead to reference leaks.
Add references release.
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mac_probe() there are calls to of_find_device_by_node() which takes
references to of_dev->dev. These references are not saved and not released
later on error path in mac_probe() and in mac_remove().
Add new fields into mac_device structure to save references taken for
future use in mac_probe() and mac_remove().
This is a preparation for further reference leaks fix.
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Seems Alcatel Lucent G-010S-P also have the same problem that it uses
TX_FAULT pin for SOC uart. So apply sfp_fixup_ignore_tx_fault to it.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Link: https://patch.msgid.link/TYCPR01MB84373677E45A7BFA5A28232C98792@TYCPR01MB8437.jpnprd01.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In NC-SI specification, NC-SI is using RMII, not MII.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20241018053331.1900100-1-jacky_chou@aspeedtech.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
There are some spelling mistakes of 'accelaration', 'exprienced' and
'rewritting' in comments which should be 'acceleration', 'experienced'
and 'rewriting'.
Suggested-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20241017162846.GA51712@kernel.org/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <90D42CB167CA0842+20241018021910.31359-1-wangyuli@uniontech.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Register a6d/12 is shadowing register MDIO_AN_EEE_ADV2. So this line
disables advertisement of EEE at 2.5G. Latest vendor driver r8125
doesn't do this (any longer?), so this mode seems to be safe.
EEE saves quite some energy, therefore enable this mode per default.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <95dd5a0c-09ea-4847-94d9-b7aa3063e8ff@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
clear yet whether there's an external version of this PHY and how
Realtek calls it, therefore use the numeric id for now.
Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Run airoha_qdma_cleanup_tx_queue() in ndo_stop callback in order to
unmap pending skbs. Moreover, reset BQL txq state stopping the netdevice,
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Message-ID: <20241017-airoha-en7581-reset-bql-v1-1-08c0c9888de5@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
This patch propagates error code correctly in cal_cycle()
and improve with FIELD_GET().
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
This patch shrinks line wrapping to 80 chars. Also, in
tx_amp_fill_result(), use FIELD_PREP() to prettify code.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
This patch fixes spelling errors, re-arrange vars with
reverse Xmas tree and remove unnecessary parens in
mediatek-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Remove rtl_dash_loop_wait_high/low to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <fb8c490c-2d92-48f5-8bbf-1fc1f2ee1649@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
warn level
In case of a problem with firmware loading we inform at the driver level,
in addition the firmware load code itself issues warnings. Therefore
switch to firmware_request_nowarn() to avoid duplicated error messages.
In addition switch to warn level because the firmware is optional and
typically just fixes compatibility issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <d9c5094c-89a6-40e2-b5fe-8df7df4624ef@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
So far we use a custom flag to define when a task can be scheduled and
when not. Let's use the standard mechanism with disable_work() et al
instead.
Note that in rtl8169_close() we can remove the call to cancel_work()
because we now call disable_work_sync() in rtl8169_down() already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
