| Age | Commit message (Collapse) | Author |
|---|
|
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K
buffers for incoming messages shared by all (currently up to eight)
channels. While the driver processes messages in one buffer, new
incoming messages are stored in the other and so on.
The design of KCAN is such that a buffer must be fully read and then
released. Releasing a buffer will make the FPGA switch buffers. If the
other buffer contains at least one incoming message the FPGA will also
instantly issue a new interrupt, if not the interrupt will be issued
after receiving the first new message.
With IRQx interrupts, it takes a little time for the interrupt to
happen, enough for any previous ISR call to do it's business and
return, but MSI interrupts are way faster so this time is reduced to
almost nothing.
So with MSI, releasing the buffer HAS to be the very last action of
the ISR before returning, otherwise the new interrupt might be
"masked" by the kernel because the previous ISR call hasn't returned.
And the interrupts are edge-triggered so we cannot loose one, or the
ping-pong reading process will stop.
This is why this patch modifies the driver to use a single write to
the SRB_CMD register before returning.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
dev_err_probe() is used to log an error message during the probe process
of a device.
It can simplify the error path and unify a message template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240830110651.519119-1-yanzhen@vivo.com
mkl: fix indention
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the IS_ENABLED() macro to check kernel config defines instead of
ifdef. Use upper_32_bits() to avoid warnings about "right shift count
>= width of type" on systems with CONFIG_ARCH_DMA_ADDR_T_64BIT not
set. In kvaser_pciefd_write_dma_map_altera() use lower_32_bits() for
symmetry.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://patch.msgid.link/20240830141038.1402217-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_priv::ctrlmode
This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].
This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.
In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].
This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX
cards. According to the IEEE standard report the EEE ability and the
EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure
and report EEE link modes.
Example:
dmesg | grep 'NIC Link is'
ethtool --show-eee <device>
Before:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
Supported EEE link modes: Not reported
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Occasionally when the system goes into pm_suspend, the suspend might fail
due to a PHY access error on the network adapter. Previously, this would
have caused the whole system to fail to go to a low power state.
An example of this was reported in the following Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=205015
[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP
[ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error
[ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs
and then the system never recovers from it, and all the following suspend failed due to this
[22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2
[22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2
[22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2
This can be avoided by changing the return values of __e1000_shutdown and
e1000e_pm_suspend functions so that they always return 0 (success). This
is consistent with what other drivers do.
If the e1000e driver encounters a hardware error during suspend, potential
side effects include slightly higher power draw or non-working wake on
LAN. This is preferred to a system-level suspend failure, and a warning
message is written to the system log, so that the user can be aware that
the LAN controller experienced a problem during suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240829072538.33195-1-shenlichuan@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240829021253.3066-1-shenlichuan@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MULTI GBT AN Control Register is IEEE Standard Register 7.32 (not a mask).
The right place should be in igc_reg.h file. In accordance with the
registers naming convention added IGC_' prefix.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
According to the IEEE standard report the EEE ability (registers 7.60 and
7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the
kernel's 'ethtool_keee' structure and report EEE link modes.
Example:
ethtool --show-eee <device>
Before:
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When running the igc with XDP/ZC in busy polling mode with deferral of hard
interrupts, interrupts still happen from time to time. That is caused by
the igc task watchdog which triggers Rx interrupts periodically.
That mechanism has been introduced to overcome skb/memory allocation
failures [1]. So the Rx clean functions stop processing the Rx ring in case
of such failure. The task watchdog triggers Rx interrupts periodically in
the hope that memory became available in the mean time.
The current behavior is undesirable for real time applications, because the
driver induced Rx interrupts trigger also the softirq processing. However,
all real time packets should be processed by the application which uses the
busy polling method.
Therefore, only trigger the Rx interrupts in case of real allocation
failures. Introduce a new flag for signaling that condition.
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for offloading MQPRIO. The hardware has four priorities as well
as four queues. Each queue must be a assigned with a unique priority.
However, the priorities are only considered in TSN Tx mode. There are two
TSN Tx modes. In case of MQPRIO the Qbv capability is not required.
Therefore, use the legacy TSN Tx mode, which performs strict priority
arbitration.
Example for mqprio with hardware offload:
|tc qdisc replace dev ${INTERFACE} handle 100 parent root mqprio num_tc 4 \
| map 0 0 0 0 0 1 2 3 0 0 0 0 0 0 0 0 \
| queues 1@0 1@1 1@2 1@3 \
| hw 1
The mqprio Qdisc also allows to configure the `preemptible_tcs'. However,
frame preemption is not supported yet.
Tested on Intel i225 and implemented by following data sheet section 7.5.2,
Transmit Scheduling.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-28 (igb, ice)
This series contains updates to igb and ice drivers.
Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause)
register on 82850 devices to workaround a hardware issue for igb.
Dawid detaches netdev device for reset to avoid ethtool accesses during
reset causing NULL pointer dereferences on ice.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add netif_device_attach/detach into PF reset flow
igb: Fix not clearing TimeSync interrupts for 82580
====================
Link: https://patch.msgid.link/20240828225444.645154-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A range of MSIX vectors are allocated at initialization for the number
needed for RocE and L2. During run-time, if the user increases or
decreases the number of L2 rings, all the MSIX vectors have to be
freed and a new range has to be allocated. This is not optimal and
causes disruptions to RoCE traffic every time there is a change in L2
MSIX.
If the system supports dynamic MSIX allocations, use dynamic
allocation to add new L2 MSIX vectors or free unneeded L2 MSIX
vectors. RoCE traffic is not affected using this scheme.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20240828183235.128948-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If dynamic MSIX allocation is supported, additional MSIX can be
allocated at run-time without reinitializing the existing MSIX entries.
The first step to support this dynamic scheme is to allocate a large
enough bp->irq_tbl if dynamic allocation is supported.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new pci_alloc_irq_vectors() and pci_free_irq_vectors() to
replace the deprecated pci_enable_msix_range() and pci_disable_msix().
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In legacy INTX mode, a register is mapped so that the INTX handler can
read it to determine if the NIC is the source of the interrupt. This
and all the related macros are no longer needed now that INTX is no
longer supported.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we only support MSIX, the BNXT_FLAG_USING_MSIX is always true.
Remove it and any if conditions checking for it. Remove the INTX
handler and associated logic.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware has deprecated support for legacy INTX in 2022 (since v2.27)
and INTX hasn't been tested for many years before that. INTX was
only used as a fallback mechansim in case MSIX wasn't available. MSIX
is always supported by all firmware. If MSIX capability in PCI config
space is not found during probe, abort.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With recent changes in the .ndo_set_vf_*() guidelines, resubmitting
this patch that was reverted eariler in 2023:
c27153682eac ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN")
Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.
Remove the unused BNXT_VF_QOS flag.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for retrieving crash dump using ethtool -w on the
supported interface.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Newer firmware supports automatic DMA of crash dump to host memory
when it crashes. If the feature is supported, allocate the required
memory using the existing context memory infrastructure. Communicate
the page table containing the DMA addresses to the firmware.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au
No adjacent changes.
Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
use dev_err_probe() instead of dev_err() to simplify the error path and
standardize the format of the error code.
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122650.1324246-1-11162571@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122336.3697176-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240828121805.3696631-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240828121551.3696520-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is already a define for minimum Ethernet frame length without FCS.
So used this instead of the magic number.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-6-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This message is a leftover from initial development. It's
unnecessary now and can be dropped.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time of MAC address assignment the netdev is not registered yet,
so netdev log functions won't work as expected. While we are at this
downgrade the log level to a warning, because a random MAC address is
not a real error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As long as the MSE102x is not operational, every packet transmission
will run into a TX timeout and flood the kernel log. So log only the
first TX timeout and a user is at least informed about this issue.
The amount of timeouts are still available via netstat.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't
have to care about when the functions are actually used.
Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
stuff if CONFIG_PM_SLEEP isn't enabled.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge thermal core updates for 6.12 which, among other things, rework
the thermal driver interface for binding cooling devices to thermal
zones and add a thermal core testing module:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki).
- Update the thermal sysfs code to store trip point attributes in trip
descriptors and get to trip points via attribute pointers (Rafael
Wysocki).
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano).
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki).
- Replace the thermal zone .bind() and .unbind() callbacks for binding
cooling devices to thermal zones with one .should_bind() callback
used for deciding whether or not a given cooling devices should be
bound to a given trip point in a given thermal zone (Rafael Wysocki).
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki).
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki).
* thermal-core: (31 commits)
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
thermal: core: Fix rounding of delay jiffies
thermal: core: Clean up trip bind/unbind functions
thermal: core: Drop unused bind/unbind functions and callbacks
thermal/of: Use the .should_bind() thermal zone callback
thermal: imx: Use the .should_bind() thermal zone callback
mlxsw: core_thermal: Use the .should_bind() thermal zone callback
platform/x86: acerhdf: Use the .should_bind() thermal zone callback
thermal: core: Unexport thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
thermal: ACPI: Use the .should_bind() thermal zone callback
thermal: core: Introduce .should_bind() thermal zone callback
thermal: core: Move thermal zone locking out of bind/unbind functions
thermal: sysfs: Use the dev argument in instance-related show/store
thermal: core: Drop redundant thermal instance checks
thermal: core: Rearrange checks in thermal_bind_cdev_to_trip()
thermal: core: Fold two functions into their respective callers
thermal: Introduce a debugfs-based testing facility
thermal/core: Compute low and high boundaries in thermal_zone_device_update()
...
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
|
|
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in hns_mac_get_info().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GPIOF_DIR_* definitions are legacy and subject to remove.
Taking this into account, remove stale comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240827171005.2301845-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change VMBus channels macro (VRSS_CHANNEL_DEFAULT) in
Linux netvsc from 8 to 16 to align with Azure Windows VM
and improve networking throughput.
For VMs having less than 16 vCPUS, the channels depend
on number of vCPUs. For greater than 16 vCPUs,
set the channels to maximum of VRSS_CHANNEL_DEFAULT and
number of physical cores / 2 which is returned by
netif_get_num_default_rss_queues() as a way to optimize CPU
resource utilization and scale for high-end processors with
many cores.
Maximum number of channels are by default set to 64.
Based on this change the channel creation would change as follows:
-----------------------------------------------------------------
| No. of vCPU | dev_info->num_chn | channels created |
-----------------------------------------------------------------
| 1-16 | 16 | vCPU |
| >16 | max(16,#cores/2) | min(64 , max(16,#cores/2)) |
-----------------------------------------------------------------
Performance tests showed significant improvement in throughput:
- 0.54% for 16 vCPUs
- 0.83% for 32 vCPUs
- 0.86% for 48 vCPUs
- 9.72% for 64 vCPUs
- 13.57% for 96 vCPUs
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/1724735791-22815-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool of this driver uses the phy API of ethtool
to get the link information from PHY driver.
Because the NC-SI is forced on 100Mbps and full duplex,
the driver connect a fixed-link phy driver for NC-SI.
The ethtool will get the link information from the
fixed-link phy driver.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240827030513.481469-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the list_for_each_entry_rcu iteration call of xenvif_flush_hash,
kfree_rcu does not exist inside the rcu read critical section, so if
kfree_rcu is called when the rcu grace period ends during the iteration,
UAF occurs when accessing head->next after the entry becomes free.
Therefore, to solve this, you need to change it to list_for_each_entry_safe.
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Regressions:
* wfx: fix for open network connection
* iwlwifi: fix for hibernate (due to fast resume feature)
* iwlwifi: fix for a few warnings that were recently added
(had previously been messages not warnings)
Previously broken:
* mwifiex: fix static structures used for per-device data
* iwlwifi: some harmless FW related messages were tagged
too high priority
* iwlwifi: scan buffers weren't checked correctly
* mac80211: SKB leak on beacon error path
* iwlwifi: fix ACPI table interop with certain BIOSes
* iwlwifi: fix locking for link selection
* mac80211: fix SSID comparison in beacon validation
* tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: clear trans->state earlier upon error
wifi: wfx: repair open network AP mode
wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap()
wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead
wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan
wifi: iwlwifi: mvm: pause TCM when the firmware is stopped
wifi: iwlwifi: fw: fix wgds rev 3 exact size
wifi: iwlwifi: mvm: take the mutex before running link selection
wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room()
wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation
wifi: iwlwifi: lower message level for FW buffer destination
wifi: iwlwifi: mvm: fix hibernation
wifi: mac80211: fix beacon SSID mismatch handling
wifi: mwifiex: duplicate static structs used in driver instances
====================
Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ethtool callbacks can be executed while reset is in progress and try to
access deleted resources, e.g. getting coalesce settings can result in a
NULL pointer dereference seen below.
Reproduction steps:
Once the driver is fully initialized, trigger reset:
# echo 1 > /sys/class/net/<interface>/device/reset
when reset is in progress try to get coalesce settings using ethtool:
# ethtool -c <interface>
BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7
RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice]
RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206
RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000
R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40
FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0
Call Trace:
<TASK>
ice_get_coalesce+0x17/0x30 [ice]
coalesce_prepare_data+0x61/0x80
ethnl_default_doit+0xde/0x340
genl_family_rcv_msg_doit+0xf2/0x150
genl_rcv_msg+0x1b3/0x2c0
netlink_rcv_skb+0x5b/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x19c/0x290
netlink_sendmsg+0x222/0x490
__sys_sendto+0x1df/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7faee60d8e27
Calling netif_device_detach() before reset makes the net core not call
the driver when ethtool command is issued, the attempt to execute an
ethtool command during reset will result in the following message:
netlink error: No such device
instead of NULL pointer dereference. Once reset is done and
ice_rebuild() is executing, the netif_device_attach() is called to allow
for ethtool operations to occur again in a safe manner.
Fixes: fcea6f3da546 ("ice: Add stats and ethtool support")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
82580 NICs have a hardware bug that makes it
necessary to write into the TSICR (TimeSync Interrupt Cause) register
to clear it:
https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/
Add a conditional so only for 82580 we write into the TSICR register,
so we don't risk losing events for other models.
Without this change, when running ptp4l with an Intel 82580 card,
I get the following output:
> timed out while polling for tx timestamp increasing tx_timestamp_timeout or
> increasing kworker priority may correct this issue, but a driver bug likely
> causes it
This goes away with this change.
This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events").
Fixes: ee14cc9ea19b ("igb: Fix missing time sync events")
Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/
Tested-by: Daiwei Li <daiweili@google.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Daiwei Li <daiweili@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We do embedd struct fown_struct into struct file letting it take up 32
bytes in total. We could tweak struct fown_struct to be more compact but
really it shouldn't even be embedded in struct file in the first place.
Instead, actual users of struct fown_struct should allocate the struct
on demand. This frees up 24 bytes in struct file.
That will have some potentially user-visible changes for the ownership
fcntl()s. Some of them can now fail due to allocation failures.
Practically, that probably will almost never happen as the allocations
are small and they only happen once per file.
The fown_struct is used during kill_fasync() which is used by e.g.,
pipes to generate a SIGIO signal. Sending of such signals is conditional
on userspace having set an owner for the file using one of the F_OWNER
fcntl()s. Such users will be unaffected if struct fown_struct is
allocated during the fcntl() call.
There are a few subsystems that call __f_setown() expecting
file->f_owner to be allocated:
(1) tun devices
file->f_op->fasync::tun_chr_fasync()
-> __f_setown()
There are no callers of tun_chr_fasync().
(2) tty devices
file->f_op->fasync::tty_fasync()
-> __tty_fasync()
-> __f_setown()
tty_fasync() has no additional callers but __tty_fasync() has. Note
that __tty_fasync() only calls __f_setown() if the @on argument is
true. It's called from:
file->f_op->release::tty_release()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
tty_release() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of tty_release() are safe as well.
file->f_op->release::tty_open()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
__tty_hangup() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of __tty_hangup() are safe as well.
From the callchains it's obvious that (1) and (2) end up getting called
via file->f_op->fasync(). That can happen either through the F_SETFL
fcntl() with the FASYNC flag raised or via the FIOASYNC ioctl(). If
FASYNC is requested and the file isn't already FASYNC then
file->f_op->fasync() is called with @on true which ends up causing both
(1) and (2) to call __f_setown().
(1) and (2) are the only subsystems that call __f_setown() from the
file->f_op->fasync() handler. So both (1) and (2) have been updated to
allocate a struct fown_struct prior to calling fasync_helper() to
register with the fasync infrastructure. That's safe as they both call
fasync_helper() which also does allocations if @on is true.
The other interesting case are file leases:
(3) file leases
lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
Which in turn is called from:
generic_add_lease()
-> lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
So here again we can simply make generic_add_lease() allocate struct
fown_struct prior to the lease_manager_ops->lm_setup::lease_setup()
which happens under a spinlock.
With that the two remaining subsystems that call __f_setown() are:
(4) dnotify
(5) sockets
Both have their own custom ioctls to set struct fown_struct and both
have been converted to allocate a struct fown_struct on demand from
their respective ioctls.
Interactions with O_PATH are fine as well e.g., when opening a /dev/tty
as O_PATH then no file->f_op->open() happens thus no file->f_owner is
allocated. That's fine as no file operation will be set for those and
the device has never been opened. fcntl()s called on such things will
just allocate a ->f_owner on demand. Although I have zero idea why'd you
care about f_owner on an O_PATH fd.
Link: https://lore.kernel.org/r/20240813-work-f_owner-v2-1-4e9343a79f9f@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-26 (ice)
This series contains updates to ice driver only.
Jake implements and uses rd32_poll_timeout to replace a jiffies loop for
calling ice_sq_done. The rd32_poll_timeout() function is designed to allow
simplifying other places in the driver where we need to read a register
until it matches a known value.
Jake, Bruce, and Przemek update ice_debug_cq() to be more robust, and more
useful for tracing control queue messages sent and received by the device
driver.
Jake rewords several commands in the ice_control.c file which previously
referred to the "Admin queue" when they were actually generic functions
usable on any control queue.
Jake removes the unused and unnecessary cmd_buf array allocation for send
queues. This logic originally was going to be useful if we ever implemented
asynchronous completion of transmit messages. This support is unlikely to
materialize, so the overhead of allocating a command buffer is unnecessary.
Sergey improves the log messages when the ice driver reports that the NVM
version on the device is not supported by the driver. Now, these messages
include both the discovered NVM version and the requested/expected NVM
version.
Aleksandr Mishin corrects overallocation of memory related to adding
scheduler nodes.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()
ice: Report NVM version numbers on mismatch during load
ice: remove unnecessary control queue cmd_buf arrays
ice: reword comments referring to control queues
ice: stop intermixing AQ commands/responses debug dumps
ice: do not clutter debug logs with unused data
ice: improve debug print for control queue messages
ice: implement and use rd32_poll_timeout for ice_sq_done timeout
====================
Link: https://patch.msgid.link/20240826224655.133847-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
