summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-05-17wifi: wilc1000: read MAC address from fuse at probeAjay Singh
The default netdev interface exposed by WILC1000 is registered at probe, but the chip mac address is not known until ndo_open, which will load and start chip firmware and then retrieve stored MAC address from it. As a consequence, the interface has uninitialized value (00:00:00:00:00) until a user brings up the interface. Fix MAC address at probe by setting the following steps: - at probe, read MAC address directly from fuse - whenever a new netdevice is created, apply saved mac address (which can be a user-provided address, or the eFuse Mac address if no address has been passed by user) - whenever an interface is brought up for the first time (and so the firmware is loaded and started), enforce netdevice mac address to the chip (in case user has changed it) Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-6-afef09f1cd10@bootlin.com
2024-05-17wifi: wilc1000: make sdio deinit function really deinit the sdio cardAlexis Lothoré
In order to be able to read raw registers (eg the nv mac address) in wilc1000 during probe before the firmware is loaded and running, we need to run the basic sdio functions initialization, but then we also need to properly deinitialize those right after, to preserve the current driver behavior (keeping the chip idle/unconfigured until the corresponding interface is brought up). Calling wilc_sdio_deinit in its current form is not enough because it merely resets an internal flag. Implement a deinit sequence which symmetrically reset all steps performed in wilc_sdio_init (only for parts activating/deactivating features, for the sake of simplicity, let's ignore blocks size configuration reset) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-5-afef09f1cd10@bootlin.com
2024-05-17wifi: wilc1000: add function to read mac address from eFuseAlexis Lothoré
wilc driver currently reads and sets mac address by firmware calls. It means that we can not access mac address if no interface has been brought up (so firmware is up and running). Another way to get mac address is to read it directly from eFUSE. Add a function helper to read the mac address written in eFuse, without firmware assistance Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-4-afef09f1cd10@bootlin.com
2024-05-17wifi: wilc1000: set wilc_set_mac_address parameter as constAlexis Lothoré
Any attempt to provide a const mac address to wilc_set_mac_address results in the following warning: warning: passing argument 2 of 'wilc_set_mac_address' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [...] drivers/net/wireless/microchip/wilc1000/hif.h:170:52: note: expected 'u8 *' {aka 'unsigned char *'} but argument is of type 'const unsigned char *'a int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr); Instead of using an explicit cast each time we need provide a MAC address, set the function parameter as const Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-3-afef09f1cd10@bootlin.com
2024-05-17wifi: wilc1000: register net device only after bus being fully initializedAlexis Lothoré
SDIO/SPI probes functions automatically add a default wlan interface on top of registered wiphy, through wilc_cfg80211_init which in turn calls wilc_netdev_ifc_init. However, bus is still not fully initialized when we register corresponding net device (for example we still miss some private driver data pointers), which for example makes it impossible to retrieve MAC address from chip (which is supposed to be set on net device before its registration) before registering net device. More generally, net device registration should not be done until driver has fully initialized everything and is ready to handle any operation on the net device. Prevent net device from being registered so early by doing it at the end of probe functions. Apply this logic to both sdio and spi buses. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-2-afef09f1cd10@bootlin.com
2024-05-17wifi: wilc1000: set net device registration as last step during interface ↵Alexis Lothoré
creation net device registration is currently done in wilc_netdev_ifc_init but other initialization operations are still done after this registration. Since net device is assumed to be usable right after registration, it should be the very last step of initialization. Move netdev registration at the very end of wilc_netdev_ifc_init to let this function completely initialize netdevice before registering it. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-1-afef09f1cd10@bootlin.com
2024-05-17wifi: ath12k: fix ack signal strength calculationLingbo Kong
Currently, the calculation of ack signal strength is incorrect. This is because before calculating the ack signal strength, ath12k need to determine whether the hardware and firmware support db2dbm. If the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Besides, the value of ack_rssi passed by firmware to ath12k should be a signed number, so change its type to s8. This patch affects QCN9274 and WCN7850 because they have the same issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240511030917.65811-1-quic_lingbok@quicinc.com
2024-05-17wifi: ath11k: Fix error path in ath11k_pcic_ext_irq_configBreno Leitao
If one of the dummy allocation fails in ath11k_pcic_ext_irq_config(), the previous allocated devices might leak due to returning without deallocating the devices. Instead of returning on the error path, deallocate all the previously allocated net_devices and then return. Fixes: bca592ead825 ("wifi: ath11k: allocate dummy net_device dynamically") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508185902.70975-1-leitao@debian.org
2024-05-16virtio_net: Fix missed rtnl_unlockDaniel Jurgens
The rtnl_lock would stay locked if allocating promisc_allmulti failed. Also changed the allocation to GFP_KERNEL. Fixes: ff7c7d9f5261 ("virtio_net: Remove command data from control_buf") Reported-by: Eric Dumazet <edumaset@google.com> Link: https://lore.kernel.org/netdev/CANn89iLazVaUCvhPm6RPJJ0owra_oFnx7Fhc8d60gV-65ad3WQ@mail.gmail.com/ Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20240515163125.569743-1-danielj@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-16idpf: don't skip over ethtool tcp-data-split settingMichal Schmidt
Disabling tcp-data-split on idpf silently fails: # ethtool -G $NETDEV tcp-data-split off # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: on But it works if you also change 'tx' or 'rx': # ethtool -G $NETDEV tcp-data-split off tx 256 # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: off The bug is in idpf_set_ringparam, where it takes a shortcut out if the TX and RX sizes are not changing. Fix it by checking also if the tcp-data-split setting remains unchanged. Only then can the soft reset be skipped. Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam") Reported-by: Xu Du <xudu@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-36182 Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-16bonding: fix oops during rmmodTony Battersby
"rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. Fixes: cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function") Cc: stable@vger.kernel.org Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-16wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-16Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Increase the timeout period of the ACMD41 command - Add card entry for quirks to debugfs - Add mmc_gpiod_set_cd_config() function - Store owner from SDIO modules with sdio_register_driver() MMC host: - atmel-mci: Some cleanups and a switch to use dev_err_probe() - renesas_sdhi: - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants - Set the SDBUF after reset - sdhci: Add support for "Tuning Error" interrupts - sdhci-acpi: - Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA - Disable write protect detection on Toshiba WT10-A - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working - sdhci_am654: - Re-work and fix the tuning support for multiple speed-modes - Add tuning algorithm for delay chain - sdhci-esdhc-imx: Add NXP S32G3 support - sdhci-of-dwcmshc: - Add tuning support for Sophgo CV1800B and SG200X - Implement SDHCI CQE support - sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes" MEMSTICK: - Convert a couple of drivers to use the ->remove_new() callback" * tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list mmc: renesas_sdhi: Set the SDBUF after reset mmc: core: Increase the timeout period of the ACMD41 command mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too mmc: atmel-mci: Switch to use dev_err_probe() mmc: atmel-mci: Incapsulate used to be a platform data into host structure mmc: atmel-mci: Replace platform device pointer by generic one mmc: atmel-mci: Use temporary variable for struct device mmc: atmel-mci: Get rid of platform data leftovers mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning mmc: sdhci-s3c: Choose sdhci_ops based on variant mmc: sdhci_am654: Constify struct sdhci_ops mmc: sdhci-sprd: Constify struct sdhci_ops mmc: sdhci-omap: Constify struct sdhci_ops mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops mmc: slot-gpio: Use irq_handler_t type mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA ...
2024-05-16net: lan966x: remove debugfs directory in probe() error pathHerve Codina
A debugfs directory entry is create early during probe(). This entry is not removed on error path leading to some "already present" issues in case of EPROBE_DEFER. Create this entry later in the probe() code to avoid the need to change many 'return' in 'goto' and add the removal in the already present error path. Fixes: 942814840127 ("net: lan966x: Add VCAP debugFS support") Cc: <stable@vger.kernel.org> Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-16wifi: ath12k: use correct MAX_RADIOSKarthikeyan Periyasamy
The current value of the MAX_RADIOS definition is 3. This is incorrect because no device supports more than 2 radios. An incorrect MAX_RADIOS value can lead to: - unnecessary memory allocation for pdev related entities. - invalid pdev id validation. - Misconceptions for code readers. Therefore, modify the MAX_RADIOS definition as 2. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240514063412.3483723-3-quic_periyasa@quicinc.com
2024-05-16wifi: ath12k: remove duplicate definition of MAX_RADIOSKarthikeyan Periyasamy
Remove the duplicate definition of MAX_RADIOS from the core header file. No functional changes, compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240514063412.3483723-2-quic_periyasa@quicinc.com
2024-05-16wifi: ath12k: remove redundant peer delete for WCN7850Kang Yang
ath12k_mac_op_unassign_vif_chanctx() will do peer delete for WCN7850's monitor interface. But for host no need to do peer create/delete for monitor interface because firmware doesn't require it, QCN9274 is the same. Also, the first judgement is true only for WCN7850, so this logic won't affect QCN9274 at any time. So remove this peer delete. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240510111238.1113-1-quic_kangyang@quicinc.com
2024-05-16wifi: ath12k: Fix tx completion ring (WBM2SW) setup failureNithyanantham Paramasivam
We observe intermittent ping failures from the access point (AP) to station (STA) in any mode (AP-STA or Mesh) configured. Specifically, the transmission completion status is not received at tx completion ring id 4 (WBM2SW ring4) for the packets transmitted via TCL DATA ring id 3. This prevents freeing up tx descriptors and leads to buffer exhaustion. Currently, during initialization of the WBM2SW ring, we are directly mapping the ring number to the ring mask to obtain the ring mask group index. This approach is causing setup failures for WBM2SW ring 4. Similarly, during runtime, when receiving incoming transmission completion status, the validation of the ring number by mapping the interrupted ring mask. This is resulting in validation failure. Thereby preventing entry into the completion handler ath12k_dp_tx_completion_handler(). The existing design assumed that the ring numbers would always be sequential and could be directly mapped with the ring mask. However, this assumption does not hold true for WBM2SW ring 4. Therefore, modify the design such that, instead of mapping the ring number, the ring ID is mapped with the ring mask. According to this design: 1. During initialization of the WBM2SW ring, mapping the ring ID to the ring mask will ensure obtaining the correct ring mask group ID. 2. During runtime, validating the interrupted ring mask group ID within the transmission completion group is sufficient. This approach allows the ring ID to be derived from the interrupted ring mask and enables entry into the completion handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240510070427.206152-1-quic_nithp@quicinc.com
2024-05-16wifi: ath12k: skip sending vdev down for channel switchAloka Dixit
Remove the unnecessary WMI vdev down operation as firmware internally does so already as part of WMI vdev restart. Repeated vdev down results in a firmware crash during channel switch operation when multiple BSSID advertisements are enabled: ath12k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 5 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 5 ath12k_pci 0000:06:00.0: failed to restart vdev 5: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 4 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 4 ath12k_pci 0000:06:00.0: failed to restart vdev 4: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-10-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: add EMA beacon supportAloka Dixit
Add new function ath12k_mac_setup_bcn_tmpl_ema() which retrieves a list of EMA (Enhanced Multi-BSSID Advertisements) beacon templates from mac80211 and sends all to firmware. Add support to send EMA configurations to firmware by adding a new parameter 'ema_params' in struct wmi_bcn_tmpl_cmd. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-9-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: add MBSSID beacon supportAloka Dixit
- A single beacon template is used for one multiple BSSID group as only one interface from group transmits the beacons. But firmware requires the host to send this template each time a nontransmitted interface is brought up. Hence, modify existing logic to retrieve the template from vif context of the transmitting interface. Also, firmware crashes if host sends a template for a nontransmitted interface which is already up, add a check to avoid this. - Set rsnie_present and wpaie_present fields for nontransmitted VAPs. - Send offset to the multiple BSSID element in the beacon template firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-8-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: refactor arvif security parameter configurationAloka Dixit
Configure security parameters in a separate function to make it easier to support setting the same for nontransmitted profiles. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-7-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID parameters in AP modeAloka Dixit
Include MBSSID parameters in WMI vdev up operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-6-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: create a structure for WMI vdev up parametersAloka Dixit
Host needs to send multiple BSSID configurations to firmware for each vdev in ath12k_wmi_vdev_up() for AP mode. This function accepts individual input parameters hence any new argument will require changes to all callers. Most of these will use default value (0 or NULL). Create a structure for the function arguments and include objects with all members initialized to zero to minimize future changes. Tested-on : QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-5-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: rename MBSSID fields in wmi_vdev_up_cmdAloka Dixit
Rename trans_bssid to tx_vdev_bssid to make it similar to vdev_bssid. Rename profile_num to nontx_profile_cnt, and profile_idx to nontx_profile_idx which make it clear that these configurations correspond to nontransmitted MBSSID profiles. These members are currently unused in the driver. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-4-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID params in vdev create/startAloka Dixit
Configure multiple BSSID flags and vdev_id of the transmited profile in vdev create/start commands depending on the service bit WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-3-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: advertise driver capabilities for MBSSID and EMAAloka Dixit
Advertise the driver support for multiple BSSID (MBSSID) and enhanced multi-BSSID advertisements (EMA) by setting extended capabilities. Configure mbssid_max_interfaces and ema_max_profile_periodicity fields in structure wiphy which are used to advertise maximum number of interfaces and profile periodicity supported by the driver. Add new WMI fields to configure maximum vdev count supported for MBSSID and profile periodicity in case of EMA. Set WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET flag to allow firmware to track and update the DTIM counts for each nontransmitted profile. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-2-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: support SMPS configuration for 6 GHzPradeep Kumar Chitrapu
Parse SMPS configuration from IEs and configure. Without this, SMPS is not enabled for 6 GHz band. This is disabled for WCN7850 as hardware does not support it. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-7-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: refactor SMPS configurationPradeep Kumar Chitrapu
Move fetching SMPS value to a new function and use u16_get_bits to extract it from capabilities. This will help in extending the functionality when SMPS support in 6 GHz band gets added in subsequent patches. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-6-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: add 6 GHz params in peer assoc commandPradeep Kumar Chitrapu
Currently A-MPDU aggregation parameters are not being configured during peer association for 6 GHz band. Hence, extract these parameters from station's capabilities received in association request and send to firmware. Without this, A-MPDU aggregation is not happening in 6 GHz band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-5-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: fix survey dump collection in 6 GHzPradeep Kumar Chitrapu
When ath12k receives survey request, choose the 6 GHz band when enabled. Without this, survey requests do not include any 6 GHz band results, leading to failures in auto channel selection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-4-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: Correct 6 GHz frequency value in rx statusPradeep Kumar Chitrapu
The frequency in the rx status is currently being filled incorrectly for the 6 GHz band. The channel number received is invalid in this case, resulting in packet drops. Fix this issue by correcting the frequency calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-3-quic_pradeepc@quicinc.com
2024-05-16wifi: ath12k: add channel 2 into 6 GHz channel listPradeep Kumar Chitrapu
Add support for the 6 GHz channel 2 with center frequency 5935 MHz and operating class 136 per IEEE Std 802.11ax-2021, Table E-4. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-2-quic_pradeepc@quicinc.com
2024-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski
Cross merge. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-15net: ks8851: Fix another TX stall caused by wrong ISR flag handlingRonald Wahl
Under some circumstances it may happen that the ks8851 Ethernet driver stops sending data. Currently the interrupt handler resets the interrupt status flags in the hardware after handling TX. With this approach we may lose interrupts in the time window between handling the TX interrupt and resetting the TX interrupt status bit. When all of the three following conditions are true then transmitting data stops: - TX queue is stopped to wait for room in the hardware TX buffer - no queued SKBs in the driver (txq) that wait for being written to hw - hardware TX buffer is empty and the last TX interrupt was lost This is because reenabling the TX queue happens when handling the TX interrupt status but if the TX status bit has already been cleared then this interrupt will never come. With this commit the interrupt status flags will be cleared before they are handled. That way we stop losing interrupts. The wrong handling of the ISR flags was there from the beginning but with commit 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun") the issue becomes apparent. Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-15wifi: ath10k: add LED and GPIO controlling support for various chipsetsSebastian Gottschall
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based chipsets with on chipset connected led's using WMI Firmware API. The LED device will get available named as "ath10k-phyX" at sysfs and can be controlled with various triggers. Adds also debugfs interface for gpio control. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Reviewed-by: Steve deRosier <derosier@cal-sierra.com> [kvalo: major reorg and cleanup] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [ansuel: rebase and small cleanup] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
2024-05-14Merge tag 'net-next-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
2024-05-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
2024-05-14Merge tag 'gpio-updates-for-v6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski "This was a quiet release cycle for the GPIO tree and so this pull-request is relatively small. We have one new driver, some minor improvements to the GPIO core code and across several drivers, some DT and documentation updates but in general nothing stands out or is controversial. All changes have spent time in next with no reported issues (or ones that were quickly fixed). GPIO core: - remove more unused legacy interfaces (after converting the last remaining users to better alternatives) - update kerneldocs - improve error handling and log messages in GPIO ACPI code - remove dead code (always true checks) from GPIOLIB New drivers: - add a driver for Intel Granite Rapids-D vGPIO Driver improvements: - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24 - provide an ID table for gpio-cros-ec to avoid a driver name fallback check - add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks - switch to using dynamic GPIO base in gpio-brcmstb - fix irq handling in gpio-npcm-sgpio - switch to memory mapped IO accessors in gpio-sch DT bindings: - add support for gpio-ranges to gpio-brcmstb - add support for a new model and the gpio-line-names property to gpio-mpfs Documentation: - replace leading tabs with spaces in code blocks - fix typos" * tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits) gpio: nuvoton: Fix sgpio irq handle error gpiolib: Discourage to use formatting strings in line names gpio: brcmstb: add support for gpio-ranges gpio: of: support gpio-ranges for multiple gpiochip devices dt-bindings: gpio: brcmstb: add gpio-ranges gpio: Add Intel Granite Rapids-D vGPIO driver gpio: brcmstb: Use dynamic GPIO base numbers gpiolib: acpi: Set label for IRQ only lines gpiolib: acpi: Add fwnode name to the GPIO interrupt label gpiolib: Get rid of never false gpio_is_valid() calls gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() gpiolib: acpi: Simplify error handling in __acpi_find_gpio() gpiolib: acpi: Extract __acpi_find_gpio() helper gpio: sch: Utilise temporary variable for struct device gpio: sch: Switch to memory mapped IO accessors gpio: regmap: Use -ENOTSUPP consistently gpio: pcie-idio-24: Use -ENOTSUPP consistently Documentation: gpio: Replace leading TABs by spaces in code blocks gpiolib: acpi: Check for errors first in acpi_find_gpio() ...
2024-05-14Merge tag 'acpi-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates coming from the 20240322 release upstream, an ACPI DPTF driver update adding new platform support for it, some new quirks and some assorted fixes and cleanups. Specifics: - Add EINJ CXL error types to actbl1.h (Ben Cheatham) - Add support for RAS2 table to ACPICA (Shiju Jose) - Fix various spelling mistakes in text files and code comments in ACPICA (Colin Ian King) - Fix spelling and typos in ACPICA (Saket Dumbre) - Modify ACPI_OBJECT_COMMON_HEADER (lijun) - Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu) - Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam) - Add missin increment of registered GPE count to ACPICA (Daniil Tatianin) - Mark new ACPICA release 20240322 (Saket Dumbre) - Add support for the AEST V2 table to ACPICA (Ruidong Tian) - Disable -Wstringop-truncation for some ACPICA code in the kernel to avoid a compiler warning that is not very useful (Arnd Bergmann) - Make the kernel indicate support for several ACPI features that are in fact supported to the platform firmware through _OSC and fix the Generic Initiator Affinity _OSC bit (Armin Wolf) - Make the ACPI core set the owner value for ACPI drivers, drop the owner setting from a number of drivers and eliminate the owner field from struct acpi_driver (Krzysztof Kozlowski) - Rearrange fields in several structures to effectively eliminate computations from container_of() in some cases (Andy Shevchenko) - Do some assorted cleanups of the ACPI device enumeration code (Andy Shevchenko) - Make the ACPI device enumeration code skip devices with _STA values clearly identified by the specification as invalid (Rafael Wysocki) - Rework the handling of the NHLT table to simplify and clarify it and drop some obsolete pieces (Cezary Rojewski) - Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV, TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter Schafranek, Tamim Khan, Christoffer Sandberg) - Add reference to UEFI DSD Guide to the documentation related to the ACPI handling of device properties (Sakari Ailus) - Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove lefover architecture-dependent code from the ACPI NUMA handling code and simplify it on top of that (Robert Richter) - Add a num-cs device property to specify the number of chip selects for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a nested CONFIG_PM #ifdef from it (Andy Shevchenko) - Move three x86-specific ACPI files to the x86 directory (Andy Shevchenko) - Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede) - Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy Sathyanarayanan) - Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar) - Mark the einj_driver driver's remove callback as __exit because it cannot get unbound via sysfs (Uwe Kleine-König) - Fix a typo in the ACPI documentation regarding the layout of sysfs subdirectory representing the ACPI namespace (John Watts) - Make the ACPI pfrut utility print the update_cap field during capability query (Chen Yu) - Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)" * tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity() ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit() ACPI/NUMA: Remove architecture dependent remainings x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7 ACPI: scan: Avoid enumerating devices with clearly invalid _STA values ACPI: Move acpi_blacklisted() declaration to asm/acpi.h ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV ACPICA: AEST: Add support for the AEST V2 table ACPI: tools: pfrut: Print the update_cap field during capability query ACPI: property: Add reference to UEFI DSD Guide Documentation: firmware-guide: ACPI: Fix namespace typo PNP: add HAS_IOPORT dependencies ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23) ACPICA: Update acpixf.h for new ACPICA release 20240322 ACPICA: events/evgpeinit: don't forget to increment registered GPE count ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure ACPICA: SRAT: Add RISC-V RINTC affinity structure ...
2024-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only deviceSamasth Norway Ananda
The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
2024-05-14wifi: iwlegacy: do not skip frames with bad FCSAndrii Batyiev
Monitor/sniffer mode benefits from all types of frames, even if FCS check fails. But we must mark frames as such. Tested on iwl3945 only. Signed-off-by: Andrii Batyiev <batyiev@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240509101140.32664-1-batyiev@gmail.com
2024-05-14net: micrel: Fix receiving the timestamp in the frame for lan8841Horatiu Vultur
The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. Fixes: cc7554954848 ("net: micrel: Change to receive timestamp in the frame for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-13net: revert partially applied PHY topology seriesJakub Kicinski
The series is causing issues with PHY drivers built as modules. Since it was only partially applied and the merge window has opened let's revert and try again for v6.11. Revert 6916e461e793 ("net: phy: Introduce ethernet link topology representation") Revert 0ec5ed6c130e ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY") Revert e75e4e074c44 ("net: phy: add helpers to handle sfp phy connect/disconnect") Revert fdd353965b52 ("net: sfp: Add helper to return the SFP bus name") Revert 841942bc6212 ("net: ethtool: Allow passing a phy index for some commands") Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/ Link: https://lore.kernel.org/all/20240507102822.2023826-1-maxime.chevallier@bootlin.com/ Link: https://lore.kernel.org/r/20240513154156.104281-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: stmmac: move the EST structure to struct stmmac_privXiaolei Wang
Move the EST structure to struct stmmac_priv, because the EST configs don't look like platform config, but EST is enabled in runtime with the settings retrieved for the TC TAPRIO feature also in runtime. So it's better to have the EST-data preserved in the driver private data instead of the platform data storage. Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240513014346.1718740-3-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: stmmac: move the EST lock to struct stmmac_privXiaolei Wang
Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c Fixes: b2aae654a479 ("net: stmmac: add mutex lock to protect est parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240513014346.1718740-2-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14wifi: rtw89: support mac_id number according to chipZong-Zhe Yang
On 802.11be chips, to consider MLO, HW doesn't design number of support mac_id as large as before. And, it might be various according to chip. For example, old chips support mac_id up to 128, but RTL8922a only supports mac_id up to 32. Besides, the mac_id acquiring function will be extended when impending MLO support. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-5-pkshih@realtek.com
2024-05-14wifi: rtw89: switch to register vif_cfg_changed and link_info_changedZong-Zhe Yang
For impending MLO support, we drop bss_info_changed callback ahead and switch to register new callbacks, vif_cfg_changed and link_info_changed, which are introduced by mac80211 for multi-link point of view. Besides, there is a place where we called ieee80211_find_sta() under station mode. To work on both non-MLD and MLD connection, we should call ieee80211_find_sta() with vif->cfg.ap_addr. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-4-pkshih@realtek.com
2024-05-14wifi: rtw89: cam: tweak relation between sec CAM and addr CAMZong-Zhe Yang
In original code architecture, sec CAM is a component of addr CAM. Hence, sec CAM could not be shared. After MLO, each link has its own addr CAM. However, one MLD PTK takes only one sec CAM but it needs to work on multiple links' addr CAMs. So, we now manage sec CAMs in global pool, and each of them is not bound to a single addr CAM now. before: +-----------------+ +--------------------+ | rtw89_{vif/sta} | ... | ieee80211_key_conf | +-----------------+ +--------------------+ ^ | V | hw_key_idx | | | V | +-- +----------+ addr_cam::key_idx | \ +---------+ | addr_cam |<>---------------------| |-------| sec_cam | +----------+ | / +---------+ +-- after: +----------------------+ +--------------------+ | rtw89_{vif/sta}_link | ... | ieee80211_key_conf | +----------------------+ +--------------------+ ^ | V | hw_key_idx | | | V | --+ +---------+ | +---------+ / | sec_cam_idx | global | | | sec_cam |-------| |----------------<>| sec_cam | | +---------+ \ | | pool | | ^ --+ +---------+ | | | (*) | +----------+ | | addr_cam |-------------+ +----------+ Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-3-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-19 17:56:56 +0000