summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-05-07gtp: properly parse extension headersPablo Neira Ayuso
Currently GTP packets are dropped if the next extension field is set to non-zero value, but this are valid GTP packets. TS 29.281 provides a longer header format, which is defined as struct gtp1_header_long. Such long header format is used if any of the S, PN, E flags is set. This long header is 4 bytes longer than struct gtp1_header, plus variable length (optional) extension headers. The next extension header field is zero is no extension header is provided. The extension header is composed of a length field which includes total number of 4 byte words including the extension header itself (1 byte), payload (variable length) and next type (1 byte). The extension header size and its payload is aligned to 4 bytes. A GTP packet might come with a chain extensions headers, which makes it slightly cumbersome to parse because the extension next header field comes at the end of the extension header, and there is a need to check if this field becomes zero to stop the extension header parser. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-05-07gtp: remove useless initializationPablo Neira Ayuso
Update b20dc3c68458 ("gtp: Allow to create GTP device without FDs") to remove useless initialization to NULL, sockets are initialized to non-NULL just a few lines of code after this. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-05-06ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: Deduplicate tc action setupMarcin Szycik
ice_tc_setup_redirect_action() and ice_tc_setup_mirror_action() are almost identical, except for setting filter action. Reduce them to one function with an extra param, which handles both cases. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: update E830 device ids and commentsPaul Greenwalt
Update existing E830 device ids and comments to align with new naming 'C' for 100G and 'CC' for 200G. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: add additional E830 device idsPaul Greenwalt
Add support for additional E830 device ids which are supported by the driver: - 0x12D5: Intel(R) Ethernet Controller E830-C for backplane - 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP - 0x12DA: Intel(R) Ethernet Controller E830-C for SFP - 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane - 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP - 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06wifi: iwlwifi: Ensure prph_mac dump includes all addressesDaniel Gabay
In prph_mac_iter, ensure that all required addresses are dumped even if a read fails. Currently, if a read fails, the region dump is stopped, preventing the creation of prph_mac.lst. By dumping all addresses even if a read fails, we can accurately determine which addresses were successfully read and which were not. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.31fa9ce91a1c.Ia0c86f70c7a6874c15ffc6f8235aa88530208546@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't request statistics in restartMiri Korenblit
During restart mac80211 notifies the driver about the association, (if we was associated before the restart) which causes the driver to request statistics from the FW. This causes to an immediate exit from EMLSR after the restart is done, when the statistics notif is handled. (too low TPT). There is no point in requesting statistics wnyway, since the FW just started and don't have any. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.16638dec9f7b.I093514312179bae566ad8d73ffb0355c6eee288a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR if secondary link is not usedMiri Korenblit
Exit EMLSR mode if the secondary link is not used enough for Rx/Tx Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.99ad1d71e9b9.Ide825433488ec809773efdc36937e3089d0012df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add beacon template version 14striebit
In version 14 tim_size became the offset of the broadcast TWT IE. Signed-off-by: striebit <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.76957de93810.I2c718b0d648f2559fe1337df39915c5e772856bc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: align UATS naming with firmwareJohannes Berg
The firmware has different names for this, which is confusing as even the convention of having the firmware name in a comment after the struct definition wasn't met here. Fix the naming, but keep UATS in some of it since that's the BIOS name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.b0dfe17d5f44.I8f5f5a831c7b934ce3140f838315827c018103bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: Force SCU_ACTIVE for specific platformsDaniel Gabay
Firmware 0x2F7 assert observed in Dell platforms when using GL HW. This issue is mitigated by setting SCU_FORCE_ACTIVE during platform low power states. Driver shall indicate firmware to force SCU active by setting bit 29 in context info prph scratch control flags. This mitigation is limited to Dell platforms with GL HW only. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Ofer Kimelman <ofer.kimelman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.3d0c56c2bb1a.I97d9da402890d2085b5698666cceffc417b6b6df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: record and return channel survey informationBenjamin Berg
While doing a passive scan, the firmware will report per-channel survey information. This information is primarily useful for hostapd when doing an ACS (Automatic Channel Selection). Collect this information and add it to the result set when getting the survey information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add the firmware API for channel surveyBenjamin Berg
When requested, the firmware can return per-channel survey information generally used for ACS (automatic channel selection). Add the API for this, which consists of a flag and a new channel survey notification. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1facde532676.I3864ac4bc0fecb7fd5136e85c07585ab7100234b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Fix race in scan completionIlan Peer
The move of the scan complete notification handling to the wiphy worker introduced a race between scan complete notification and scan abort: - The wiphy lock is held, e.g., for rfkill handling etc. - Scan complete notification is received but not handled yet. - Scan abort is triggered, and scan abort is sent to the FW. Once the scan abort command is sent successfully, the flow synchronously waits for the scan complete notification. However, as the scan complete notification was already received but not processed yet, this hangs for a second and continues leaving the scan status in an inconsistent state. - Once scan complete handling is started (when the wiphy lock is not held) since the scan status is not an inconsistent state, a warning is issued and the scan complete notification is not handled. To fix this issue, switch back the scan complete notification to be asynchronously handling, and only move the link selection logic to a worker (which was the original reason for the move to use wiphy lock). While at it, refactor some prints to improve debug data. Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidthYedidya Benshimol
When validating a link pair for EMLSR, add a print for invalid link pair due to bandwidth Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9e57ad898cf4.Id8edfd5e3774ea6475d5f4178ab7ea75a870ef95@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasonsYedidya Benshimol
Add a reading for all active EMLSR blocking reasons for testing purposes. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add active EMLSR blocking reasons printsYedidya Benshimol
Upon adding/removing an EMLSR blocking reason add to the print the EMLSR disabling mask Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1e34fe2c3e51.Ia7db0392d81818ceb70a7b199d3f5fa8a4ad198d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: bump FW API to 90 for BZ/SC devicesMiri Korenblit
Start supporting API version 90 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.4e4b19128b56.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix primary link settingMiri Korenblit
mvmvif::primary link holds the ID and not a bitmap. Fix this Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.779bf6949053.Ia9297991ff2fdc82ae7c730e0069e2dd6e5f2902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: use already determined cmd_idJohannes Berg
In iwl_mvm_rs_fw_rate_init() we have a variable cmd_id that holds the command ID, so we can just use that instead of the various calculations of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.f894ede03b26.I18f03c272b1c0807767f2713f3ffbb2941c57d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't reset link selection during restartJohannes Berg
After restart, we might want to end up with the same config as before, even for multi-link/EMLSR. Therefore, don't reset the stored link selection result in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: Print EMLSR states nameDaniel Gabay
This is useful for debug instead of looking for the hex value. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.f3509cf652f2.Ic086b6b2132ffe249b3c4bdd24c673ce7fd1b614@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix typo in debug printMiri Korenblit
Change EMSLR to EMLSR Fixes: 6cf7df9f013f ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.db629302bfdc.I135e28b89fab3b614ad8758c0305834934f8c0af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: avoid always prefering single-linkMiri Korenblit
The new link selection algorithm uses defaults values for BSS load if the BSS Load element was not published by the AP. For 6 GHz, that value is 0. So if the best link is 6 GHz, the EMLSR grade to always be equal to the grade of the best link, and then the best link grade is getting a bonus of 10 percent, meaning that we will never activate EMLSR. Change the logic to not give a bonus for the best link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4614e6891dbd.Ie40eae0dd99d82ba60dea5b6dbcd42dcdf16b90d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection upon TTLM start/endMiri Korenblit
When non default TTLM is applied, mac80211 may force us to use a specific link (For example, if the only active link becomes a dormant link, mac80211 will pick the first usable link and set it as active). When default TTLM is applied, we have new usable links that we might want to select. Therefore, trigger MLO scan and link selection upon change in TTLM. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: consider FWs recommendation for EMLSRMiri Korenblit
FW sends a notification indicating whether activating EMLSR mode is recommended or not. Support the notification and enter EMLSR only if recommended. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.2fd3387882eb.I7a8a5b24658744ed732bfc03b1872c9298483d62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't always unblock EMLSRMiri Korenblit
When an event occurs to unblock EMLSR, the code attempts to re-enable EMLSR. However, the current implementation always tries to activate EMLSR, regardless of whether the blocker was set before the unblocking event or not. If EMLSR was already unblocked, there is no need to re-activate it. Fixes: 6cf7df9f013f ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.eb861402dac9.I6a1d9f774f5551cfab60ea37b71a62640496af9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Always allow entering EMLSR from debugfsMiri Korenblit
EMLSR can't be activated from mac80211. Except for the debugfs, which is intended for testing purposes. Currently we don't allow entering EMLSR from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is not 0. But we need a way to activate EMLSR regardless of the vif being blocked, for testing. Remove the check of esr_disable_reason Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add a debugfs for (un)blocking EMLSRMiri Korenblit
This is needed for testing purposes. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.eba2b6f0664c.I5f058e02abda11bf2eccfd2bcb59ca26bae87a3a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection after exiting EMLSRMiri Korenblit
If the reason for exiting EMLSR was a blocking reason, wait for the corresponding unblocking event: - if there is an ongoing scan - do nothing. Link selection will be triggered at the end of it. - If more than 30 seconds passed since the exit, trigger MLO scan, which will trigger link selection - If less then 30 seconds passed since exit, reuse the latest link selection result If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*), schedule MLO scan in 30 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06Merge wireless into wireless-nextJohannes Berg
Given how late we are in the cycle, merge the two fixes from wireless into wireless-next as they don't see that urgent. This way, the wireless tree won't need rebasing later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06net: microchip: lan743x: Reduce PTP timeout on HW failureRengarajan S
The PTP_CMD_CTL is a self clearing register which controls the PTP clock values. In the current implementation driver waits for a duration of 20 sec in case of HW failure to clear the PTP_CMD_CTL register bit. This timeout of 20 sec is very long to recognize a HW failure, as it is typically cleared in one clock(<16ns). Hence reducing the timeout to 1 sec would be sufficient to conclude if there is any HW failure observed. The usleep_range will sleep somewhere between 1 msec to 20 msec for each iteration. By setting the PTP_CMD_CTL_TIMEOUT_CNT to 50 the max timeout is extended to 1 sec. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240502050300.38689-1-rengarajan.s@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-06Merge tag 'rtw-next-2024-05-04-v2' of https://github.com/pkshih/rtwKalle Valo
rtw-next patches for v6.10 Major changes are listed as below rtl8xxxu: - remove rtl8xxxu_ prefix from filename - cleanup includes of header files rtlwifi: - adjust code to share with coming support of rtl8192du rtw89: - complete features of new WiFi 7 chip 8922AE including BT-coexistence and WoWLAN - use BIOS ACPI settings to set TX power and channels
2024-05-05gve: Alloc and free QPLs with the ringsShailend Chand
Every tx and rx ring has its own queue-page-list (QPL) that serves as the bounce buffer. Previously we were allocating QPLs for all queues before the queues themselves were allocated and later associating a QPL with a queue. This is avoidable complexity: it is much more natural for each queue to allocate and free its own QPL. Moreover, the advent of new queue-manipulating ndo hooks make it hard to keep things as is: we would need to transfer a QPL from an old queue to a new queue, and that is unpleasant. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Account for stopped queues when reading NIC statsShailend Chand
We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Reset Rx ring state in the ring-stop funcsShailend Chand
This does not fix any existing bug. In anticipation of the ndo queue api hooks that alloc/free/start/stop a single Rx queue, the already existing per-queue stop functions are being made more robust. Specifically for this use case: rx_queue_n.stop() + rx_queue_n.start() Note that this is not the use case being used in devmem tcp (the first place these new ndo hooks would be used). There the usecase is: new_queue.alloc() + old_queue.stop() + new_queue.start() + old_queue.free() Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Avoid rescheduling napi if on wrong cpuShailend Chand
In order to make possible the implementation of per-queue ndo hooks, gve_turnup was changed in a previous patch to account for queues already having some unprocessed descriptors: it does a one-off napi_schdule to handle them. If conditions of consistent high traffic persist in the immediate aftermath of this, the poll routine for a queue can be "stuck" on the cpu on which the ndo hooks ran, instead of the cpu its irq has affinity with. This situation is exacerbated by the fact that the ndo hooks for all the queues are invoked on the same cpu, potentially causing all the napi poll routines to be residing on the same cpu. A self correcting mechanism in the poll method itself solves this problem. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Make gve_turnup work for nonempty queuesShailend Chand
gVNIC has a requirement that all queues have to be quiesced before any queue is operated on (created or destroyed). To enable the implementation of future ndo hooks that work on a single queue, we need to evolve gve_turnup to account for queues already having some unprocessed descriptors in the ring. Say rxq 4 is being stopped and started via the queue api. Due to gve's requirement of quiescence, queues 0 through 3 are not processing their rings while queue 4 is being toggled. Once they are made live, these queues need to be poked to cause them to check their rings for descriptors that were written during their brief period of quiescence. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Make gve_turn(up|down) ignore stopped queuesShailend Chand
Currently the queues are either all live or all dead, toggling from one state to the other via the ndo open and stop hooks. The future addition of single-queue ndo hooks changes this, and thus gve_turnup and gve_turndown should evolve to account for a state where some queues are live and some aren't. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Add adminq funcs to add/remove a single Rx queueShailend Chand
This allows for implementing future ndo hooks that act on a single queue. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-05gve: Make the GQ RX free queue funcs idempotentShailend Chand
Although this is not fixing any existing double free bug, making these functions idempotent allows for a simpler implementation of future ndo hooks that act on a single queue. Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-04wifi: rtlwifi: 8192d: initialize rate_mask in rtl92de_update_hal_rate_mask()Ping-Ke Shih
le32p_replace_bits() only updates partial bits of rate_mask, and GCC warns below. Set initial value to avoid warnings, and prevent random value of missed bits (bit 6 of rate_mask.macid_and_short_gi). In file included from ./include/linux/fortify-string.h:5, from ./include/linux/string.h:369, from ./include/linux/bitmap.h:13, from ./include/linux/cpumask.h:13, from ./include/linux/sched.h:16, from drivers/net/wireless/realtek/rtlwifi/rtl8192d/../wifi.h:9, from drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:4: In function 'le32p_replace_bits', inlined from 'rtl92de_update_hal_rate_mask.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:986:2: ./include/linux/bitfield.h:189:15: warning: 'rate_mask' is used uninitialized [-Wuninitialized] 189 | *p = (*p & ~to(field)) | type##_encode_bits(val, field); \ | ^~ ./include/linux/bitfield.h:196:9: note: in expansion of macro '____MAKE_OP' 196 | ____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \ | ^~~~~~~~~~~ ./include/linux/bitfield.h:201:1: note: in expansion of macro '__MAKE_OP' 201 | __MAKE_OP(32) | ^~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c: In function 'rtl92de_update_hal_rate_mask.isra': drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:863:37: note: 'rate_mask' declared here 863 | struct rtl92d_rate_mask_h2c rate_mask; | ^~~~~~~~~ Compile tested only. Fixes: 014bba73b525 ("wifi: rtlwifi: Adjust rtl8192d-common for USB") Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240504111916.31445-1-pkshih@realtek.com
2024-05-04wifi: rtlwifi: Remove unused structs and avoid multiple -Wfamnae warningsGustavo A. R. Silva
Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. So, remove unused structs and fix the following -Wflex-array-member-not-at-end warnings: drivers/net/wireless/realtek/rtlwifi/btcoexist/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8188ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192c/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192ce/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192cu/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192de/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8192se/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723be/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8723com/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/realtek/rtlwifi/wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/ZjLFIa31BGPVCGh1@neat
2024-05-04wifi: rtw89: correct aSIFSTime for 6GHz bandPing-Ke Shih
aSIFSTime is 10us for 2GHz band and 16us for 5GHz and 6GHz bands. Originally, it doesn't consider 6GHz band and use wrong value, so correct it accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240430020515.8399-1-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-20 08:11:41 +0000