| Age | Commit message (Collapse) | Author |
|---|
|
Eric Dumazet says:
====================
net: reduce sk_filter() (and friends) bloat
Some functions return an error by value, and a drop_reason
by an output parameter. This extra parameter can force stack canaries.
A drop_reason is enough and more efficient.
This series reduces bloat by 678 bytes on x86_64:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.final
add/remove: 0/0 grow/shrink: 3/18 up/down: 79/-757 (-678)
Function old new delta
vsock_queue_rcv_skb 50 79 +29
ipmr_cache_report 1290 1315 +25
ip6mr_cache_report 1322 1347 +25
tcp_v6_rcv 3169 3167 -2
packet_rcv_spkt 329 327 -2
unix_dgram_sendmsg 1731 1726 -5
netlink_unicast 957 945 -12
netlink_dump 1372 1359 -13
sk_filter_trim_cap 889 858 -31
netlink_broadcast_filtered 1633 1595 -38
tcp_v4_rcv 3152 3111 -41
raw_rcv_skb 122 80 -42
ping_queue_rcv_skb 109 61 -48
ping_rcv 215 162 -53
rawv6_rcv_skb 278 224 -54
__sk_receive_skb 690 632 -58
raw_rcv 591 527 -64
udpv6_queue_rcv_one_skb 935 869 -66
udp_queue_rcv_one_skb 919 853 -66
tun_net_xmit 1146 1074 -72
sock_queue_rcv_skb_reason 166 76 -90
Total: Before=29722890, After=29722212, chg -0.00%
Future conversions from sock_queue_rcv_skb() to sock_queue_rcv_skb_reason()
can be done later.
====================
Link: https://patch.msgid.link/20260409145625.2306224-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_filter_trim_cap will soon return the reason by value,
do the same for sk_filter_reason().
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-21 (-21)
Function old new delta
sock_queue_rcv_skb_reason 128 126 -2
tun_net_xmit 1146 1127 -19
Total: Before=29722661, After=29722640, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MDIO bus controllers are not required to wait for write transactions to
complete before returning as synchronization is often achieved by polling
status bits.
This can cause issues when disabling interrupts since an interrupt could
fire before the interrupt handler is unregistered and there's no status
bit to poll.
Add a phy_write_barrier() function and use it in phy_disable_interrupts()
to fix this issue. The write barrier just reads an MII register and
discards the value, which is enough to guarantee that previous writes have
completed.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-4-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds an MDIO driver for PIC64-HPSC/HX. The hardware supports C22
and C45 but only C22 is implemented in this commit.
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely
different with pic64hpsc, hence the need for a separate driver.
The documentation recommends an input clock of 156.25MHz and a prescaler
of 39, which yields an MDIO clock of 1.95MHz.
The hardware supports an interrupt pin or a "TRIGGER" bit that can be
polled to signal transaction completion. This commit uses polling.
This was tested on Microchip HB1301 evalkit with a VSC8574 and a
VSC8541.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260408131821.1145334-3-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The return value of phy_c45_probe_present() is stored in "ret", not
"phy_reg", fix this. "phy_reg" always has a positive value if we reach
this return path (since it would have returned earlier otherwise), which
means that the original goal of the patch of not considering -ENODEV
fatal wasn't achieved.
Fixes: 17b447539408 ("net: phy: c45 scanning: Don't consider -ENODEV fatal")
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260409133654.3203336-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove unnecessary semicolons in octep_oq_drop_rx().
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Link: https://patch.msgid.link/1775711291-13938-1-git-send-email-nobuhiro.iwamatsu.x90@mail.toshiba
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initially 'reg' and 'val' are assigned from HW_PARAM_2.
But since IPA v5.0+ takes EV_PER_EE from HW_PARAM_4 (instead of
NUM_EV_PER_EE from HW_PARAM_2), we not only need to re-assign 'reg' but
also read the register value of that register into 'val' so that
reg_decode() works on the correct value.
Fixes: f651334e1ef5 ("net: ipa: add HW_PARAM_4 GSI register")
Link: https://sashiko.dev/#/patchset/20260403-milos-ipa-v1-0-01e9e4e03d3e%40fairphone.com?part=2
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-ipa-fixes-v1-2-a817c30678ac@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'val' variable gets overwritten multiple times, discarding previous
values. Looking at the git log shows these should be combined with |=
instead.
Fixes: 9265a4f0f0b4 ("net: ipa: define even more IPA register fields")
Link: https://sashiko.dev/#/patchset/20260403-milos-ipa-v1-0-01e9e4e03d3e%40fairphone.com?part=4
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-ipa-fixes-v1-1-a817c30678ac@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
/dev/ppp open is currently authorized against file->f_cred->user_ns,
while unattached administrative ioctls operate on current->nsproxy->net_ns.
As a result, a local unprivileged user can create a new user namespace
with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,
and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against
an inherited network namespace.
Require CAP_NET_ADMIN in the user namespace that owns the target network
namespace before handling unattached PPP administrative ioctls.
This preserves normal pppd operation in the network namespace it is
actually privileged in, while rejecting the userns-only inherited-netns
case.
Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Link: https://patch.msgid.link/20260409071117.4354-1-hataegu0826@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SIOCSCCSMEM ioctl copies a scc_mem_config from user space and
assigns its bufsize field directly to scc->stat.bufsize without any
range validation:
scc->stat.bufsize = memcfg.bufsize;
If a privileged user (CAP_SYS_RAWIO) sets bufsize to 0, the receive
interrupt handler later calls dev_alloc_skb(0) and immediately writes
a KISS type byte via skb_put_u8() into a zero-capacity socket buffer,
corrupting the adjacent skb_shared_info region.
Reject bufsize values smaller than 16; this is large enough to hold
at least one KISS header byte plus useful data.
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Acked-by: Joerg Reuter <jreuter@yaina.de>
Link: https://patch.msgid.link/20260409024927.24397-3-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BPQ length field is decoded as:
len = skb->data[0] + skb->data[1] * 256 - 5;
If the sender sets bytes [0..1] to values whose combined value is
less than 5, len becomes negative. Passing a negative int to
skb_trim() silently converts to a huge unsigned value, causing the
function to be a no-op. The frame is then passed up to AX.25 with
its original (untrimmed) payload, delivering garbage beyond the
declared frame boundary.
Additionally, a negative len corrupts the 64-bit rx_bytes counter
through implicit sign-extension.
Add a bounds check before pulling the length bytes: reject frames
where len is negative or exceeds the remaining skb data.
Acked-by: Joerg Reuter <jreuter@yaina.de>
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Link: https://patch.msgid.link/20260409024927.24397-2-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like ENETC v1, ENETC v4 also has many non-standard counters, so these
counters are added to improve statistical coverage.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260408055849.1314033-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENETC v1 has two MACs (eMAC and pMAC) to support preemption. The
existing unstructured counters include the eMAC counters, but not the
pMAC counters. So add pMAC counters to improve statistical coverage.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260408055849.1314033-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The standardized counters are already exposed via the get_pause_stats(),
get_rmon_stats(), get_eth_ctrl_stats() and get_eth_mac_stats()
interfaces. Keeping the same counters in enetc_pm_counters results in
redundant output.
Remove these standardized counters from enetc_pm_counters and rely on
the existing statistics interfaces to report them.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260408055849.1314033-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For ENETC v1, each SI provides 16 RBDCR registers for RX ring drop
counters, but this does not imply that an SI actually owns 16 RX rings.
The ENETC hardware supports a total of 16 RX rings, which are assigned
to 3 SIs (1 PSI and 2 VSIs), so each SI is assigned fewer than 16 RX
rings.
The current implementation always reports 16 RX drop counters per SI,
leading to redundant output for SIs with fewer RX rings. Update the
logic to display drop counters only for the RX rings that are actually
assigned to the SI.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260408055849.1314033-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC v4 provides 64-bit counters for IEEE 802.3 basic and mandatory
managed objects, the IETF Management Information Database (MIB) package
(RFC2665), and Remote Network Monitoring (RMON) statistics. In addition,
some ENETCs support preemption, so these ENETCs have two MACs: MAC 0 is
the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). Both MACs
support these statistics.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260408055849.1314033-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8211F previously unconditionally disabled PHY-mode EEE in
config_init. Convert this to use the new .disable_autonomous_eee
callback so it is only disabled when the MAC indicates EEE support
via phy_support_eee().
This preserves PHY-autonomous EEE for MACs that do not support EEE,
while still disabling it when the MAC manages LPI.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-3-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the .disable_autonomous_eee callback for the BCM54210E.
In AutogrEEEn mode the PHY manages EEE autonomously. Clearing the
AutogrEEEn enable bit in MII_BUF_CNTL_0 switches the PHY to Native
EEE mode.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-2-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PHYs (e.g. Broadcom BCM54xx, Realtek RTL8211F) implement
autonomous EEE where the PHY manages LPI signaling without forwarding
it to the MAC. This conflicts with MAC drivers that implement their own
LPI control.
Add a .disable_autonomous_eee callback to struct phy_driver and call it
from phy_support_eee(). When a MAC driver indicates it supports EEE via
phy_support_eee(), the PHY's autonomous EEE is automatically disabled so
the MAC can manage LPI entry/exit.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-1-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_qdma_cleanup_rx_queue()
When the descriptor index written in REG_RX_CPU_IDX() is equal to the one
stored in REG_RX_DMA_IDX(), the hw will stop since the QDMA RX ring is
empty.
Add missing REG_RX_CPU_IDX() configuration in airoha_qdma_cleanup_rx_queue
routine during QDMA RX ring cleanup.
Fixes: 514aac359987 ("net: airoha: Add missing cleanup bits in airoha_qdma_cleanup_rx_queue()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408-airoha-cpu-idx-airoha_qdma_cleanup_rx_queue-v1-1-8efa64844308@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the current_speed debugfs file creation from mana_probe_port() to
mana_init_port(). The file was previously created only during initial
probe, but mana_cleanup_port_context() removes the entire vPort debugfs
directory during detach/attach cycles. Since mana_init_port() recreates
the directory on re-attach, moving current_speed here ensures it survives
these cycles.
Fixes: 75cabb46935b ("net: mana: Add support for net_shaper_ops")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260408081224.302308-3-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use pci_name(pdev) for the per-device debugfs directory instead of
hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The
previous approach had two issues:
1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs
in environments like generic VFIO passthrough or nested KVM,
causing a NULL pointer dereference.
2. Multiple PFs would all use "0", and VFs across different PCI
domains or buses could share the same slot name, leading to
-EEXIST errors from debugfs_create_dir().
pci_name(pdev) returns the unique BDF address, is always valid, and is
unique across the system.
Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260408081224.302308-2-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the legacy ethtool statistics interface (get_sset_count,
get_strings, get_ethtool_stats) to expose hardware counters not
available through standard kernel stats APIs.
Ex:
a) Per-queue ring stats
rxq0_ucast_packets: 2
rxq0_mcast_packets: 0
rxq0_bcast_packets: 15
rxq0_ucast_bytes: 120
rxq0_mcast_bytes: 0
rxq0_bcast_bytes: 900
txq0_ucast_packets: 0
txq0_mcast_packets: 0
txq0_bcast_packets: 0
txq0_ucast_bytes: 0
txq0_mcast_bytes: 0
txq0_bcast_bytes: 0
b) Per-queue TPA(LRO/GRO) stats
rxq4_tpa_eligible_pkt: 0
rxq4_tpa_eligible_bytes: 0
rxq4_tpa_pkt: 0
rxq4_tpa_bytes: 0
rxq4_tpa_errors: 0
rxq4_tpa_events: 0
c) Port level stats
rxp_good_vlan_frames: 0
rxp_mtu_err_frames: 0
rxp_tagged_frames: 0
rxp_double_tagged_frames: 0
rxp_pfc_ena_frames_pri0: 0
rxp_pfc_ena_frames_pri1: 0
rxp_pfc_ena_frames_pri2: 0
rxp_pfc_ena_frames_pri3: 0
rxp_pfc_ena_frames_pri4: 0
rxp_pfc_ena_frames_pri5: 0
rxp_pfc_ena_frames_pri6: 0
rxp_pfc_ena_frames_pri7: 0
rxp_eee_lpi_events: 0
rxp_eee_lpi_duration: 0
rxp_runt_bytes: 0
rxp_runt_frames: 0
txp_good_vlan_frames: 0
txp_jabber_frames: 0
txp_fcs_err_frames: 0
txp_pfc_ena_frames_pri0: 0
txp_pfc_ena_frames_pri1: 0
txp_pfc_ena_frames_pri2: 0
txp_pfc_ena_frames_pri3: 0
txp_pfc_ena_frames_pri4: 0
txp_pfc_ena_frames_pri5: 0
txp_pfc_ena_frames_pri6: 0
txp_pfc_ena_frames_pri7: 0
txp_eee_lpi_events: 0
txp_eee_lpi_duration: 0
txp_xthol_frames: 0
d) Per-priority stats
rx_bytes_pri0: 4182650
rx_bytes_pri1: 4182650
rx_bytes_pri2: 4182650
rx_bytes_pri3: 4182650
rx_bytes_pri4: 4182650
rx_bytes_pri5: 4182650
rx_bytes_pri6: 4182650
rx_bytes_pri7: 4182650
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-11-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stat_ops to provide standardized per-queue
statistics via the Netlink API.
Below is the description of the hardware drop counters:
rx-hw-drop-overruns: Packets dropped by HW due to resource limitations
(e.g., no BDs available in the host ring).
rx-hw-drops: Total packets dropped by HW (sum of overruns and error
drops).
tx-hw-drop-errors: Packets dropped by HW because they were invalid or
malformed.
tx-hw-drops: Total packets dropped by HW (sum of resource limitations
and error drops).
The implementation was verified using the ynl tool:
./tools/net/ynl/pyynl/cli.py --spec \
Documentation/netlink/specs/netdev.yaml --dump qstats-get --json \
'{"ifindex":14, "scope":"queue"}'
[{'ifindex': 14, 'queue-id': 0, 'queue-type': 'rx', 'rx-bytes': 758,
'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 11},
{'ifindex': 14, 'queue-id': 1, 'queue-type': 'rx', 'rx-bytes': 0,
'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 0},
{'ifindex': 14, 'queue-id': 0, 'queue-type': 'tx', 'tx-bytes': 0,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 0},
{'ifindex': 14, 'queue-id': 1, 'queue-type': 'tx', 'tx-bytes': 0,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 0},
{'ifindex': 14, 'queue-id': 2, 'queue-type': 'tx', 'tx-bytes': 810,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 10},]
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-10-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ndo_get_stats64 callback to report aggregate network
statistics. The driver gathers these by accumulating the per-ring
counters into the provided rtnl_link_stats64 structure.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the timer to schedule periodic stats collection via
the workqueue when the link is up. Fetch fresh counters from
hardware via DMA and accumulate them into 64-bit software
shadows, handling wrap-around for counters narrower than
64 bits.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-8-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the hardware-level statistics foundation and modern structured
ethtool operations.
1. Infrastructure: Add HWRM firmware wrappers (FUNC_QSTATS_EXT,
PORT_QSTATS_EXT, and PORT_QSTATS) to query ring and port counters.
2. Structured ops: Implement .get_eth_phy_stats, .get_eth_mac_stats,
.get_eth_ctrl_stats, .get_pause_stats, and .get_rmon_stats.
Stats are initially reported as 0; accumulation logic is added
in a subsequent patch.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register for firmware asynchronous events, including link-status,
link-speed, and PHY configuration changes. Upon event reception,
re-query the PHY and update ethtool settings accordingly.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-6-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement .get_pauseparam and .set_pauseparam to support flow control
configuration. This allows reporting and setting of autoneg, RX pause,
and TX pause states.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add get/set_link_ksettings, get_link, and nway_reset support.
Report supported, advertised, and link-partner speeds across NRZ,
PAM4, and PAM4-112 signaling modes. Enable lane count reporting.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Query PHY capabilities and supported speeds from firmware,
retrieve current link state (speed, duplex, pause, FEC),
and log the information. Seed initial link state during probe.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a dedicated single-thread workqueue and a timer for each PF
to drive deferred slow-path work such as link event handling and
stats collection. The timer is stopped via timer_delete_sync()
when interrupts are disabled and restarted on open.
While the close path stops the timer to prevent new tasks from
being scheduled, the sp_task and workqueue are preserved to
maintain state continuity. Final draining and destruction of
the workqueue are handled during PCI remove.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-2-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wire in the SW USO path added in preceding commits when hardware USO is
not possible.
When a GSO skb with SKB_GSO_UDP_L4 arrives and the NIC lacks HW USO
capability, redirect to bnxt_sw_udp_gso_xmit() which handles software
segmentation into individual UDP frames submitted directly to the TX
ring.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-10-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update __bnxt_tx_int and bnxt_free_one_tx_ring_skbs to handle SW GSO
segments:
- MID segments: adjust tx_pkts/tx_bytes accounting and skip skb free
(the skb is shared across all segments and freed only once)
- LAST segments: call tso_dma_map_complete() to tear down the IOVA
mapping if one was used. On the fallback path, payload DMA unmapping
is handled by the existing per-BD dma_unmap_len walk.
Both MID and LAST completions advance tx_inline_cons to release the
segment's inline header slot back to the ring.
is_sw_gso is initialized to zero, so the new code paths are not run.
Add logic for feature advertisement and guardrails for ring sizing.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-9-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement bnxt_sw_udp_gso_xmit() using the core tso_dma_map API and
the pre-allocated TX inline buffer for per-segment headers.
The xmit path:
1. Calls tso_start() to initialize TSO state
2. Stack-allocates a tso_dma_map and calls tso_dma_map_init() to
DMA-map the linear payload and all frags upfront.
3. For each segment:
- Copies and patches headers via tso_build_hdr() into the
pre-allocated tx_inline_buf (DMA-synced per segment)
- Counts payload BDs via tso_dma_map_count()
- Emits long BD (header) + ext BD + payload BDs
- Payload BDs use tso_dma_map_next() which yields (dma_addr,
chunk_len, mapping_len) tuples.
Header BDs set dma_unmap_len=0 since the inline buffer is pre-allocated
and unmapped only at ring teardown.
Completion state is updated by calling tso_dma_map_completion_save() for
the last segment.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-8-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bnxt_gso.c and bnxt_gso.h with a stub bnxt_sw_udp_gso_xmit()
function, SW USO constants (BNXT_SW_USO_MAX_SEGS,
BNXT_SW_USO_MAX_DESCS), and the is_sw_gso field in bnxt_sw_tx_bd
with BNXT_SW_GSO_MID/LAST markers.
The full SW USO implementation will be added in a future commit.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-7-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add per-ring pre-allocated inline buffer fields (tx_inline_buf,
tx_inline_dma, tx_inline_size) to bnxt_tx_ring_info and helpers to
allocate and free them. A producer and consumer (tx_inline_prod,
tx_inline_cons) are added to track which slot(s) of the inline buffer
are in-use.
The inline buffer will be used by the SW USO path for pre-allocated,
pre-DMA-mapped per-segment header copies. In the future, this
could be extended to support TX copybreak.
Allocation helper is marked __maybe_unused in this commit because it
will be wired in later.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-6-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the DMA mapping length in each TX buffer descriptor via
dma_unmap_len_set at submit time, and use dma_unmap_len at completion
time.
This is a no-op for normal packets but prepares for software USO,
where header BDs set dma_unmap_len to 0 because the header buffer
is unmapped collectively rather than per-segment.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-5-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Factor out some code to setup tx_bd_exts into a helper function. This
helper will be used by SW USO implementation in the following commits.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-4-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Export bnxt_xmit_get_cfa_action so that it can be used in future commits
which add software USO support to bnxt.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-3-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace reads a single mode netkit device via RTM_GETLINK,
it receives IFLA_NETKIT_SCRUB=NETKIT_SCRUB_DEFAULT attribute from
netkit_fill_info(). If that attribute is echoed back to recreate
the device, the seen_scrub presence check in netkit_new_link()
causes creation to fail with -EOPNOTSUPP. Since it has no meaning
for single devices at this point, just don't dump it.
Fixes: 481038960538 ("netkit: Add single device mode for netkit")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410072334.548232-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable chip_rev stores the value read from the FPGA_REV
register and represents the FPGA revision. Rename it to fpga_rev
to better reflect its meaning.
No functional change intended.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260410085710.9246-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-04-09
Johan Hovold's patch fixes the a devres lifetime in the ucan driver.
The last patch is by Samuel Page and fixes a use-after-free in
raw_rcv() in the CAN_RAW protocol.
* tag 'linux-can-fixes-for-7.0-20260409' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix ro->uniq use-after-free in raw_rcv()
can: ucan: fix devres lifetime
====================
Link: https://patch.msgid.link/20260409165942.588421-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under high stress, we spend a lot of time cloning skbs,
then acquiring a spinlock, then freeing the clone because
the queue is full.
Add a shortcut to avoid these costs under pressure, as we did
in macvlan with commit 0d5dc1d7aad1 ("macvlan: avoid spinlock
contention in macvlan_broadcast_enqueue()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce indentation level, and add a likely() clause
as we expect to process more unicast packets than multicast ones.
No functional change, this eases the following patch review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Save the current mode of flow control, and enhance the statistics of
pause frames.
The received pause frames are divided into XON and XOFF to be counted.
And due to the hardware defect of SP devices, XON packets cannot be
trasmitted correctly, so Tx XON pause is disabled by default for those
devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-10-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The WX_PX_MPRC registers are not clear-on-read hardware counters. The
previous implementation directly read and accumulated these 32-bit values
into a 64-bit software counter. Now implement a rd32_wrap() helper
function to calculate the delta counter to correct the statistic.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-9-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware statistics should be updated periodically in the watchdog to
prevent 32-bit registers from overflowing. This is also required for the
upcoming pause frame accounting logic, which relies on regular statistics
sampling.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-8-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing the device, timer_delete_sync(&wx->service_timer) is
called in .ndo_stop() after cancel_work_sync(&wx->service_task). This
may cause new work to be queued after device down.
Move unregister_netdev() before cancel_work_sync(), and use
timer_shutdown_sync() to prevent the timer from being re-armed.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-7-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
