| Age | Commit message (Collapse) | Author |
|---|
|
Since function ops wx->setup_tc() is set in txgbe and ngbe,
ethtool_ops.set_channels can be implemented in libwx to reduce
duplicated code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-6-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the busy-wait loop using test_and_set_bit(WX_STATE_RESETTING)
with a proper per-device mutex to serialize reset operations.
The reset flag is reserved for other code paths (like watchdog), which
need tocheck if a reset is in process.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NGBE_NCSI_SUP and NGBE_NCSI_MASK are duplicate-defined, they can be
replaced by the macros defined in libwx. Just remove them.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove duplicate-defined register macros, move the WOL implementation to
the library module. So that the WOL functions can be reused in txgbe
later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev->ethtool->wol_enabled is set in ethtool core code, so remove the
redundant setting in ngbe_set_wol().
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII.
Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Link: https://patch.msgid.link/6118e81358d47f455e4c1dbddf3ece6f3329e184.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iavf_ethtool.c contains 31 kernel-doc comment blocks using the legacy
`**/` terminator instead of the correct single `*/`. Two function
headers also use a colon separator (`iavf_get_channels:`,
`iavf_set_channels:`) instead of the ` - ` dash required by kernel-doc.
Additionally several comments embed their return-value descriptions in
the body paragraph, producing `scripts/kernel-doc -Wreturn` warnings.
Void functions that incorrectly say "Returns ..." are also rephrased.
Fix all issues across the full file:
- Replace every `**/` terminator with `*/`.
- Change `function_name:` doc headers to `function_name -`.
- Move inline "Returns ..." sentences into dedicated `Return:` sections
for non-void functions (iavf_get_msglevel, iavf_get_rxnfc,
iavf_set_channels, iavf_get_rxfh_key_size, iavf_get_rxfh_indir_size,
iavf_get_rxfh, iavf_set_rxfh).
- Rephrase body descriptions in void functions that incorrectly said
"Returns ..." (iavf_get_drvinfo, iavf_get_ringparam, iavf_get_coalesce).
- Remove boilerplate body text for iavf_get_rxfh_key_size and
iavf_get_rxfh_indir_size; the `Return:` line now conveys the same
information without the vague "Returns the table size." sentence.
Suggested-by: Anthony L. Nguyen <anthony.l.nguyen@intel.com>
Suggested-by: Leszek Pepiak <leszek.pepiak@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260409093020.3808687-1-aleksandr.loktionov@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_fe_set routine is used to set specified bits to 1 in the selected
register. In the FE_PSE_BUF_SET case this can due to a overestimation of
the required buffers for I/O queues since we can miss to set some bits
of PSE_ALLRSV_MASK subfield to 0. Fix the issue relying on airoha_fe_rmw
routine instead.
Fixes: 8e38e08f2c560 ("net: airoha: fix PSE memory configuration in airoha_fe_pse_ports_init()")
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408-airoha-reg_fe_pse_buf_set-v1-1-0c4fa8f4d1d9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add VLAN support using both the Extended VLAN (EVLAN) engine and the
VLAN Filter (VF) engine in a hybrid architecture that allows a higher
number of VIDs than either engine could achieve alone.
The VLAN Filter engine handles per-port VID membership checks with
discard-unmatched semantics. The Extended VLAN engine handles PVID
insertion on ingress (via fixed catchall rules) and tag stripping on
egress (2 rules per untagged VID). Tagged-only VIDs need no EVLAN
egress rules at all, so they consume only a VF entry.
Both engines draw from shared 1024-entry hardware pools. The VF pool
is divided equally among user ports for VID membership, while the
EVLAN pool is partitioned into small fixed-size ingress blocks (7
entries of catchall rules per port) and fixed-size egress blocks for
tag stripping.
With 5 user ports this yields up to 204 VIDs per port (limited by VF),
of which up to 98 can be untagged (limited by EVLAN egress budget).
With 9 user ports the numbers are 113 total and 53 untagged.
Wire up .port_vlan_add, .port_vlan_del, and .port_vlan_filtering.
Reprogram all EVLAN rules when the PVID or filtering mode changes.
Detach blocks from the bridge port before freeing them on bridge leave
to satisfy the firmware's internal refcount.
Future optimizations could increase VID capacity by dynamically sizing
the egress EVLAN blocks based on actual per-port untagged VID counts
rather than worst-case pre-allocation, or by sharing EVLAN egress and
VLAN Filter blocks across ports with identical VID sets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9be29637675342b109a85fa08f5378800d9f7b78.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mxl862xx_bridge_port_set() is currently guarded by the
mxl8622_port->setup_done flag, as the early call to
mxl862xx_bridge_port_set() from mxl862xx_port_stp_state_set() would
otherwise cause a NULL-pointer dereference on unused ports which don't
have dp->cpu_dp despite not being a CPU port.
Using the setup_done flag (which is never set for unused ports),
however, also prevents mxl862xx_bridge_port_set() from configuring
user ports' single-port bridges early, which was unintended.
Fix this by returning early from mxl862xx_bridge_port_set() in case
dsa_port_is_unused().
Fixes: 340bdf984613c ("net: dsa: mxl862xx: implement bridge offloading")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/15962aac29ebe0a6eb77565451acff880c41ef33.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DSA links aren't supported by the mxl862xx driver.
Instead of returning early from .port_setup when called for
DSA_PORT_TYPE_DSA ports rather return -EOPNOTSUPP and show an error
message.
The desired side-effect is that the framework will switch the port to
DSA_PORT_TYPE_UNUSED, so we can stop caring about DSA_PORT_TYPE_DSA in
all other places.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b686f3a22d8a6e7d470e7aa98da811a996a229b9.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sixpack_receive_buf() does not properly skip bytes with TTY error flags.
The while loop iterates through the flags buffer but never advances the
data pointer (cp), and passes the original count (including error bytes)
to sixpack_decode(). This causes sixpack_decode() to process bytes that
should have been skipped due to TTY errors. The TTY layer does not
guarantee that cp[i] holds a meaningful value when fp[i] is set, so
passing those positions to sixpack_decode() results in KMSAN reporting
an uninit-value read.
Fix this by processing bytes one at a time, advancing cp on each
iteration, and only passing valid (non-error) bytes to sixpack_decode().
This matches the pattern used by slip_receive_buf() and
mkiss_receive_buf() for the same purpose.
Reported-by: syzbot+ecdb8c9878a81eb21e54@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecdb8c9878a81eb21e54
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260407173101.107352-1-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On each WMI message received from the hardware, we alloc a temporary array
of WMI_TAG_MAX entries of type void *. This array is then populated with
pointers of parsed structs depending on the WMI type, and then freed. This
alloc can fail when memory pressure in the system is high enough.
Given the fact that it is scheduled in softirq with the system_bh_wq, we
should not be able to parse more than one WMI message per CPU at any time.
So instead lets move to a per cpu allocated array, that is reused across
calls. This memory is allocated as needed and refcounted to exist only
as long as one struct ath12k_base lives.
ath12k_wmi_tlv_parse_alloc() and ath12k_wmi_tlv_parse() are merged
together as it no longer allocs mem but returns the existing per-cpu one.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407095426.3285574-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
fbnic_up() calls netif_tx_start_all_queues(), which only clears
__QUEUE_STATE_DRV_XOFF. If qdisc backlog has accumulated on any TX
queue before the reconfiguration (e.g. ring resize via ethtool -G),
start does not call __netif_schedule() to kick the qdisc, so the
pending backlog is never drained and the queue stalls.
Switch to netif_tx_wake_all_queues(), which clears DRV_XOFF and also
calls __netif_schedule() on every queue, ensuring any backlog that
built up before the down/up cycle is promptly dequeued.
Fixes: bc6107771bb4 ("eth: fbnic: Allocate a netdevice and napi vectors with queues")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260408002415.2963915-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing dma_rmb() in airoha_qdma_rx_process routine to make sure the
DMA read operations are completed when the NIC reports the processing on
the current descriptor is done. Moreover, add missing READ_ONCE() in
airoha_qdma_rx_process() for DMA descriptor control fields in order to
avoid any compiler reordering.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260407-airoha_qdma_rx_process-fix-reordering-v3-1-91c36e9da31f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the copper NIC with external PHY, the driver called
phylink_connect_phy() during probe and phylink_disconnect_phy() during
remove. It caused an RTNL assertion warning in phylink_disconnect_phy()
upon module remove.
To fix this, add rtnl_lock() and rtnl_unlock() around the
phylink_disconnect_phy() in remove function.
------------[ cut here ]------------
RTNL: assertion failed at drivers/net/phy/phylink.c (2351)
WARNING: drivers/net/phy/phylink.c:2351 at
phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464
Modules linked in: ...
CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+
Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING
PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink]
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7
48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a
e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000
RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020
RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000
R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348
FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
txgbe_remove_phy+0xbb/0xd0 [txgbe]
txgbe_remove+0x4c/0xb0 [txgbe]
pci_device_remove+0x41/0xb0
device_remove+0x43/0x80
device_release_driver_internal+0x206/0x270
driver_detach+0x4a/0xa0
bus_remove_driver+0x83/0x120
driver_unregister+0x2f/0x60
pci_unregister_driver+0x40/0x90
txgbe_driver_exit+0x10/0x850 [txgbe]
__do_sys_delete_module.isra.0+0x1c3/0x2f0
__x64_sys_delete_module+0x12/0x20
x64_sys_call+0x20c3/0x2390
do_syscall_64+0x11c/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x15a/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_fault+0x312/0x580
? srso_alias_return_thunk+0x5/0xfbef5
? __handle_mm_fault+0x9d5/0x1040
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events+0x101/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1e8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x2f8/0x820
? srso_alias_return_thunk+0x5/0xfbef5
? irqentry_exit+0xb2/0x600
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 02b2a6f91b90 ("net: txgbe: support copper NIC with external PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/8B47A5872884147D+20260407094041.4646-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bcmgenet_timeout handler tries to take down all tx queues when
a single queue times out. This is over zealous and causes many race
conditions with queues that are still chugging along. Instead lets
only restart the timed out queue.
Fixes: 13ea657806cf ("net: bcmgenet: improve TX timeout")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-4-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While reclaiming the tx queue we fast forward the write pointer to
drop any data in flight. These dropped frames are not added back
to the pool of free bds. We also need to tell the netdev that we
are dropping said data.
Fixes: f1bacae8b655 ("net: bcmgenet: support reclaiming unsent Tx packets")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The write_ptr points to the next open tx_cb. We want to return the
tx_cb that gets rewinded, so we must rewind the pointer first then
return the tx_cb that it points to. That way the txcb can be correctly
cleaned up.
Fixes: 876dbadd53a7 ("net: bcmgenet: Fix unmapping of fragments in bcmgenet_xmit()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For non-PREEMPT_RT kernels, the IRQ handler runs with interrupts
disabled, allowing the use of napi_schedule_irqoff() to save a pair of
local_irq_{save,restore} operations. For PREEMPT_RT kernels,
napi_schedule_irqoff() behaves identically to napi_schedule().
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260407-macb-napi-irqoff-v1-1-61bec60047d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ppp_destroy_{channel,interface} are always called after
refcount_dec_and_test().
To reduce boilerplate code, consolidate the decrements by moving them
into the two functions. To reflect this change in semantics, rename the
functions to ppp_release_*.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260407094058.257246-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. The implementation
follows EMI improvement application note Rev. 1.2 for these PHYs.
The current implementation enables SSC for both RXC and SYSCLK clock
signals. Introduce DT properties 'realtek,clkout-ssc-enable',
'realtek,rxc-ssc-enable' and 'realtek,sysclk-ssc-enable' which control
CLKOUT, RXC and SYSCLK SSC spread spectrum clocking enablement on these
signals.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-3-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VLAN-filtering is done through two netdev features
(NETIF_F_HW_VLAN_CTAG_FILTER and NETIF_F_HW_VLAN_STAG_FILTER) and two
netdev ops (ndo_vlan_rx_add_vid and ndo_vlan_rx_kill_vid).
Implement these and advertise the features if the lower device supports
them. This allows proper VLAN filtering to work on top of MACsec
devices, when the lower device is capable of VLAN filtering.
As a concrete example, having this chain of interfaces now works:
vlan_filtering_capable_dev(1) -> macsec_dev(2) -> macsec_vlan_dev(3)
Before the mentioned commit this used to accidentally work because the
MACsec device (and thus the lower device) was put in promiscuous mode
and the VLAN filter was not used. But after commit [1] correctly made
the macsec driver expose the IFF_UNICAST_FLT flag, promiscuous mode was
no longer used and VLAN filters on dev 1 kicked in. Without support in
dev 2 for propagating VLAN filters down, the register_vlan_dev ->
vlan_vid_add -> __vlan_vid_add -> vlan_add_rx_filter_info call from dev
3 is silently eaten (because vlan_hw_filter_capable returns false and
vlan_add_rx_filter_info silently succeeds).
For MACsec, VLAN filters are only relevant for offload, otherwise
the VLANs are encrypted and the lower devices don't care about them. So
VLAN filters are only passed on to lower devices in offload mode.
Flipping between offload modes now needs to offload/unoffload the
filters with vlan_{get,drop}_rx_*_filter_info().
To avoid the back-and-forth filter updating during rollback, the setting
of macsec->offload is moved after the add/del secy ops. This is safe
since none of the code called from those requires macsec->offload.
In case adding the filters fails, the added ones are rolled back and an
error is returned to the operation toggling the offload state.
Fixes: 0349659fd72f ("macsec: set IFF_UNICAST_FLT priv flag")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260408115240.1636047-5-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for storing the list of VLANs in nsim devices, together with
ops for adding/removing them and a debug file to show them.
This will be used in upcoming tests.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260408115240.1636047-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Skipped sites writing into __be16 (netdevsim) and __le64
(ceph) fields where a direct assignment would trigger
sparse endianness warnings.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150758.5889-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable support for AF_XDP applications to operate on a netkit device.
The goal is that AF_XDP applications can natively consume AF_XDP
from network namespaces. The use-case from Cilium side is to support
Kubernetes KubeVirt VMs through QEMU's AF_XDP backend. KubeVirt is a
virtual machine management add-on for Kubernetes which aims to provide
a common ground for virtualization. KubeVirt spawns the VMs inside
Kubernetes Pods which reside in their own network namespace just like
regular Pods.
Raw QEMU AF_XDP backend example with eth0 being a physical device with
16 queues where netkit is bound to the last queue (for multi-queue RSS
context can be used if supported by the driver):
# ethtool -X eth0 start 0 equal 15
# ethtool -X eth0 start 15 equal 1 context new
# ethtool --config-ntuple eth0 flow-type ether \
src 00:00:00:00:00:00 \
src-mask ff:ff:ff:ff:ff:ff \
dst $mac dst-mask 00:00:00:00:00:00 \
proto 0 proto-mask 0xffff action 15
[ ... setup BPF/XDP prog on eth0 to steer into shared xsk map ... ]
# ip netns add foo
# ip link add numrxqueues 2 nk type netkit single
# ynl --family netdev --output-json --do queue-create \
--json "{"ifindex": $(ifindex nk), "type": "rx", \
"lease": { "ifindex": $(ifindex eth0), \
"queue": { "type": "rx", "id": 15 } } }"
{'id': 1}
# ip link set nk netns foo
# ip netns exec foo ip link set lo up
# ip netns exec foo ip link set nk up
# ip netns exec foo qemu-system-x86_64 \
-kernel $kernel \
-drive file=${image_name},index=0,media=disk,format=raw \
-append "root=/dev/sda rw console=ttyS0" \
-cpu host \
-m $memory \
-enable-kvm \
-device virtio-net-pci,netdev=net0,mac=$mac \
-netdev af-xdp,ifname=nk,id=net0,mode=native,queues=1,start-queue=1,inhibit=on,map-path=$dir/xsks_map \
-nographic
We have tested the above against a dual-port Nvidia ConnectX-6 (mlx5)
100G NIC with successful network connectivity out of QEMU. An earlier
iteration of this work was presented at LSF/MM/BPF [0] and more
recently at LPC [1].
For getting to a first starting point to connect all things with
KubeVirt, bind mounting the xsk map from Cilium into the VM launcher
Pod which acts as a regular Kubernetes Pod while not perfect, is not
a big problem given its out of reach from the application sitting
inside the VM (and some of the control plane aspects are baked in
the launcher Pod already), so the isolation barrier is still the VM.
Eventually the goal is to have a XDP/XSK redirect extension where
there is no need to have the xsk map, and the BPF program can just
derive the target xsk through the queue where traffic was received
on.
The exposure through netkit is because Cilium should not act as a
proxy handing out xsk sockets. Existing applications expect a netdev
from kernel side and should not need to rewrite just to implement
against a CNI's protocol. Also, all the memory should not be accounted
against Cilium but rather the application Pod itself which is consuming
AF_XDP. Further, on up/downgrades we expect the data plane to being
completely decoupled from the control plane; if Cilium would own the
sockets that would be disruptive. Another use-case which opens up and
is regularly asked from users would be to have DPDK applications on
top of AF_XDP in regular Kubernetes Pods.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://lpc.events/event/19/contributions/2275/ [1]
Link: https://patch.msgid.link/20260402231031.447597-14-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement rtnl_link_ops->alloc that allows the number of rx queues to be
set when netkit is created. By default, netkit has only a single rxq (and
single txq). The number of queues is deliberately not allowed to be changed
via ethtool -L and is fixed for the lifetime of a netkit instance.
For netkit device creation, numrxqueues with larger than one rxq can be
specified. These rxqs are leasable to real rxqs in physical netdevs:
ip link add type netkit peer numrxqueues 64 # for device pair
ip link add numrxqueues 64 type netkit single # for single device
The limit of numrxqueues for netkit is currently set to 1024, which allows
leasing multiple real rxqs from physical netdevs.
The implementation of ndo_queue_create() adds a new rxq during the queue
lease operation. We allow to create queues either in single device mode
or for the case of dual device mode for the netkit peer device which gets
placed into the target network namespace. For dual device mode the lease
against the primary device does not make sense for the targeted use cases,
and therefore gets rejected.
We also need to add a lockdep class for netkit, such that lockdep does
not trip over us, similarly done as in commit 0bef512012b1 ("net: add
netdev_lockdep_set_classes() to virtual drivers").
This is also the last missing bit to netkit for supporting io_uring with
zero-copy mode [0]. Up until this point it was not possible to consume the
latter out of containers or Kubernetes Pods where applications are in their
own network namespace.
io_uring example with eth0 being a physical device with 16 queues where
netkit is bound to the last queue, iou-zcrx.c is binary from selftests;
ethtool configuration (tcp-data-split, hds_thresh, RSS, flow steering)
is done on the physical device by the control plane; here, flow steering
to that queue is based on the service VIP:port of the server utilizing
io_uring:
# ethtool -X eth0 start 0 equal 15
# ethtool -X eth0 start 15 equal 1 context new
# ethtool --config-ntuple eth0 flow-type tcp4 dst-ip 1.2.3.4 dst-port 5000 action 15
# ip netns add foo
# ip link add type netkit peer numrxqueues 2
# ynl --family netdev --output-json --do queue-create \
--json "{"ifindex": $(ifindex nk0), "type": "rx", \
"lease": { "ifindex": $(ifindex eth0), \
"queue": { "type": "rx", "id": 15 } } }"
{'id': 1}
# ip link set nk0 netns foo
# ip link set nk1 up
# ip netns exec foo ip link set lo up
# ip netns exec foo ip link set nk0 up
# ip netns exec foo ip addr add 1.2.3.4/32 dev nk0
[ ... setup routing etc to get external traffic into the netns ... ]
# ip netns exec foo ./iou-zcrx -s -p 5000 -i nk0 -q 1
Remote io_uring client:
# ./iou-zcrx -c -h 1.2.3.4 -p 5000 -l 12840 -z 65536
We have tested the above against a Broadcom BCM957504 (bnxt_en) 100G NIC,
supporting TCP header/data split.
Similarly, this also works for devmem which we tested using ncdevmem:
# ip netns exec foo ./ncdevmem -s 1.2.3.4 -l -p 5000 -f nk0 -t 1 -q 1
And on the remote client:
# ./ncdevmem -s 1.2.3.4 -p 5000 -f eth0
For Cilium, the plan is to open up support for the various memory providers
for regular Kubernetes Pods when Cilium is configured with netkit datapath
mode.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://kernel-recipes.org/en/2024/schedule/efficient-zero-copy-networking-using-io_uring [0]
Link: https://patch.msgid.link/20260402231031.447597-12-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a single device mode for netkit instead of netkit pairs. The primary
target for the paired devices is to connect network namespaces, of course,
and support has been implemented in projects like Cilium [0]. For the rxq
leasing the plan is to support two main scenarios related to single device
mode:
* For the use-case of io_uring zero-copy, the control plane can either
set up a netkit pair where the peer device can perform rxq leasing which
is then tied to the lifetime of the peer device, or the control plane
can use a regular netkit pair to connect the hostns to a Pod/container
and dynamically add/remove rxq leasing through a single device without
having to interrupt the device pair. In the case of io_uring, the memory
pool is used as skb non-linear pages, and thus the skb will go its way
through the regular stack into netkit. Things like the netkit policy when
no BPF is attached or skb scrubbing etc apply as-is in case the paired
devices are used, or if the backend memory is tied to the single device
and traffic goes through a paired device.
* For the use-case of AF_XDP, the control plane needs to use netkit in the
single device mode. The single device mode currently enforces only a
pass policy when no BPF is attached, and does not yet support BPF link
attachments for AF_XDP. skbs sent to that device get dropped at the
moment. Given AF_XDP operates at a lower layer of the stack tying this
to the netkit pair did not make sense. In future, the plan is to allow
BPF at the XDP layer which can: i) process traffic coming from the AF_XDP
application (e.g. QEMU with AF_XDP backend) to filter egress traffic or
to push selected egress traffic up to the single netkit device to the
local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the
single netkit into the AF_XDP application (e.g. DHCP replies). Also,
the control-plane can dynamically manage rxq leasing for the single
netkit device without having to interrupt (e.g. down/up cycle) the main
netkit pair for the Pod which has traffic going in and out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0]
Link: https://patch.msgid.link/20260402231031.447597-11-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bitmap_empty() is more verbose and efficient, as it stops traversing
{r,t}xq_ena as soon as the 1st set bit found.
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Use the right helper and save one bitmaps traverse.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind.
Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Cc: stable@vger.kernel.org # 4.19
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Fixes: 89ba464fcf54 ("net: lan966x: refactor buffer reload function")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-4-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-3-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-2-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The RTL8157 uses a different packet descriptor format compared to the
previous generation of chips. Add support for this format by adding a
descriptor format structure into the r8152 structure and corresponding
desc_ops functions which abstract the vlan-tag, tx/rx len and
tx/rx checksum algorithms.
Also, add support for the ADV indirect access interface of the RTL8157
and PHY setup.
For initialization of the RTL8157, combine the existing RTL8156B and
RTL8156 init functions and add RTL8157-specific functinality in order
to improve code readability and maintainability.
r8156_init() is now called with RTL_VER_10 and RTL_VER_11 for the RTL8156,
with RTL_VER_12, RTL_VER_13 and RTL_VER_15 for the RTL8156B and with
RTL_VER_16 for the RTL8157 and checks the version for chip-specific code.
Also add USB power control functions for the RTL8157.
Add support for the USB device ID of Realtek RTL8157-based adapters. Detect
the RTL8157 as RTL_VER_16 and set it up.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-2-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The RTL8157 supports 5GBit Link speeds. Add support for this speed
in the setup and setting/getting through ethtool. Also add 5GBit EEE.
Add functionality for setup and ethtool get/set methods.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-1-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260403-milos-ipa-v1-2-01e9e4e03d3e@fairphone.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the field masks to match the hardware layout documented in
downstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*).
Notably this fixes a WARN I was seeing when I tried to send "stop"
to the MPSS remoteproc while IPA was up.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260403-milos-ipa-v1-1-01e9e4e03d3e@fairphone.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-04-06 (idpf, ice, ixgbe, ixgbevf, igb, e1000)
Emil converts to use spinlock_t for virtchnl transactions to make
consistent use of the xn_bm_lock when accessing the free_xn_bm bitmap,
while also avoiding nested raw/bh spinlock issue on PREEMPT_RT kernels.
He also sets payload size before calling the async handler, to make sure
it doesn't error out prematurely due to invalid size check for idpf.
Kohei Enju changes WARN_ON for missing PTP control PF to a dev_info() on
ice as there are cases where this is expected and acceptable.
Petr Oros fixes conditions in which error paths failed to call
ice_ptp_port_phy_restart() breaking PTP functionality on ice.
Alex significantly reduces reporting of driver information, and time
under RTNL locl, on ixgbe e610 devices by reducing reads of flash info
only on events that could change it.
Michal Schmidt adds missing Hyper-V op on ixgbevf.
Alex Dvoretsky removes call to napi_synchronize() in igb_down() to
resolve a deadlock.
Agalakov Daniil adds error check on e1000 for failed EEPROM read.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: check return value of e1000_read_eeprom
igb: remove napi_synchronize() in igb_down()
ixgbevf: add missing negotiate_features op to Hyper-V ops table
ixgbe: stop re-reading flash on every get_drvinfo for e610
ice: fix PTP timestamping broken by SyncE code on E825C
ice: ptp: don't WARN when controlling PF is unavailable
idpf: set the payload size before calling the async handler
idpf: improve locking around idpf_vc_xn_push_free()
idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
====================
Link: https://patch.msgid.link/20260406213038.444732-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register port-level resources for netdevsim ports to enable testing
of the port resource infrastructure.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device-level "resource show" displays max_local_SFs and
max_external_SFs without indicating which port each resource belongs
to. Users cannot determine the controller number and pfnum associated
with each SF pool.
Register max_SFs resource on the host PF representor port to expose
per-port SF limits. Users can correlate the port resource with the
controller number and pfnum shown in 'devlink port show'.
Future patches will introduce an ECPF that manages multiple PFs,
where each PF has its own SF pool.
Example usage:
$ devlink resource show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608:
name max_SFs size 20 unit entry
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev pf0hpf flavour pcipf
controller 1 pfnum 0 external true splittable false
function:
hw_addr b8:3f:d2:e1:8f:dc roce enable max_io_eqs 120
We can create up to 20 SFs over devlink port pci/0000:03:00.0/196608,
with pfnum 0 and controller 1.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no reason at all to export these data types to the global
include directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This shows an improvement of 1.9% in reducing the CPU cycles and data
cache misses.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260408001813.635679-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipvlan and macvlan use queues to process broadcast/multicast packets
from a work queue.
Under attack these queues can drop packets.
Add MACVLAN_BROADCAST_BACKLOG drop_reason for macvlan broadcast queue.
Add IPVLAN_MULTICAST_BACKLOG drop_reason for ipvlan multicast queue.
Use different reasons as some deployments use both ipvlan and macvlan.
Also change ipvlan_rcv_frame() to use SKB_DROP_REASON_DEV_READY
when the device is not UP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150710.1640747-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
