| Age | Commit message (Collapse) | Author |
|---|
|
syzbot reported a crash [1] in dql_completed() after recent usbnet
BQL adoption.
The reason for the crash is that netdev_reset_queue() is called too soon.
It should be called after cancel_work_sync(&dev->bh_work) to make
sure no more TX completion can happen.
[1]
kernel BUG at lib/dynamic_queue_limits.c:99 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99
Call Trace:
<IRQ>
netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline]
netdev_completed_queue include/linux/netdevice.h:3894 [inline]
usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
bh_worker+0x2b1/0x600 kernel/workqueue.c:3611
tasklet_action+0xc/0x70 kernel/softirq.c:952
handle_softirqs+0x27d/0x850 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
invoke_softirq kernel/softirq.c:496 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723
irq_exit_rcu+0x9/0x30 kernel/softirq.c:739
Fixes: 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)")
Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20251219144459.692715-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a crash issue when running zero copy XDP_TX action, the crash
log is shown below.
[ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000
[ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP
[ 216.301694] Call trace:
[ 216.304130] dcache_clean_poc+0x20/0x38 (P)
[ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0
[ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400
[ 216.317701] __stmmac_xdp_run_prog+0x164/0x368
[ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00
[ 216.326576] __napi_poll+0x40/0x218
[ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt
For XDP_TX action, the xdp_buff is converted to xdp_frame by
xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame
depends on the memory type of the xdp_buff. For page pool based xdp_buff
it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy
XSK pool based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the
memory type and always uses the page pool type, this leads to invalid
mappings and causes the crash. Therefore, check the xdp_buff memory type
in stmmac_xdp_xmit_back() to fix this issue.
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20251204071332.1907111-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Various fixes all over, most are recent regressions but
also some long-standing issues:
- cfg80211:
- fix an issue with overly long SSIDs
- mac80211:
- long-standing beacon protection issue on some devices
- for for a multi-BSSID AP-side issue
- fix a syzbot warning on OCB (not really used in practice)
- remove WARN on connections using disabled channels,
as that can happen due to changes in the disable flag
- fix monitor mode list iteration
- iwlwifi:
- fix firmware loading on certain (really old) devices
- add settime64 to PTP clock to avoid a warning and clock
registration failure, but it's not actually supported
- rtw88:
- remove WQ_UNBOUND since it broke USB adapters
(because it can't be used with WQ_BH)
- fix SDIO issues with certain devices
- rtl8192cu: fix TID array out-of-bounds (since 6.9)
- wlcore (TI): add missing skb push headroom increase
* tag 'wireless-2025-12-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP
wifi: iwlwifi: Fix firmware version handling
wifi: mac80211: ocb: skip rx_no_sta when interface is not joined
wifi: mac80211: do not use old MBSSID elements
wifi: mac80211: don't WARN for connections on invalid channels
wifi: wlcore: ensure skb headroom before skb_push
wifi: cfg80211: sme: store capped length in __cfg80211_connect_result()
wifi: mac80211: fix list iteration in ieee80211_add_virtual_monitor()
wifi: mac80211: Discard Beacon frames to non-broadcast address
Revert "wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users"
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
wifi: rtw88: limit indirect IO under powered off for RTL8822CS
====================
Link: https://patch.msgid.link/20251217201441.59876-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G.
Fixes: d45d8979840d ("octeontx2-pf: Add basic ethtool support")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Link: https://patch.msgid.link/20251219062226.524844-1-agaur@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from
mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan().
mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can
invoke the driver's remove path and free the gdma_context associated
with the device. After returning, mana_serv_reset() currently jumps to
the out label and attempts to clear gc->in_service, dereferencing a
freed gdma_context.
The issue was observed with the following call logs:
[ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d
[ 698.943121] #PF: supervisor write access in kernel mode
[ 698.943423] #PF: error_code(0x0002) - not-present page
[S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0
0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI
tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1
...
[Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16
000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000
[Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405
[Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000
[Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0
[Sat Dec 6 07:50:56 2025] Call Trace:
[Sat Dec 6 07:50:56 2025] <TASK>
[Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana]
[Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350
[Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0
[Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200
[Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250
[Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10
[Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30
[Sat Dec 6 07:50:56 2025] </TASK>
Fix this by returning immediately after mana_serv_rescan() to avoid
accessing GC state that may no longer be valid.
Fixes: 9bf66036d686 ("net: mana: Handle hardware recovery events when probing the device")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20251218131054.GA3173@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ASIX driver reads the PHY address from the USB device via
asix_read_phy_addr(). A malicious or faulty device can return an
invalid address (>= PHY_MAX_ADDR), which causes a warning in
mdiobus_get_phy():
addr 207 out of range
WARNING: drivers/net/phy/mdio_bus.c:76
Validate the PHY address in asix_read_phy_addr() and remove the
now-redundant check in ax88172a.c.
Reported-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3d43c9066a5b54902232
Tested-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com
Fixes: 7e88b11a862a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return")
Link: https://lore.kernel.org/all/20251217085057.270704-1-kartikey406@gmail.com/T/ [v1]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251218011156.276824-1-kartikey406@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently in the return path, fwnode_handle_put calls are missing. Just use
_scoped to avoid the issue.
Fixes: 24e31e474769 ("net: mdio: Add RTL9300 MDIO driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20251217210153.14641-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
port_fdb_dump() is supposed to only add fdb entries, but we iterate over
the full ARL table, which also includes multicast entries.
So check if the entry is a multicast entry before passing it on to the
callback().
Additionally, the port of those entries is a bitmask, not a port number,
so any included entries would have even be for the wrong port.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-12-17 (i40e, iavf, idpf, e1000)
For i40e:
Przemyslaw immediately schedules service task following changes to
filters to ensure timely setup for PTP.
Gregory Herrero adjusts VF descriptor size checks to be device specific.
For iavf:
Kohei Enju corrects a couple of condition checks which caused off-by-one
issues.
For idpf:
Larysa fixes LAN memory region call to follow expected requirements.
Brian Vazquez reduces mailbox wait time during init to avoid lengthy
delays.
For e1000:
Guangshuo Li adds validation of data length to prevent out-of-bounds
access.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: fix OOB in e1000_tbi_should_accept()
idpf: reduce mbx_task schedule delay to 300us
idpf: fix LAN memory regions command on some NVMs
iavf: fix off-by-one issues in iavf_config_rss_reg()
i40e: validate ring_len parameter against hardware-specific values
i40e: fix scheduling in set_rx_mode
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Broadcom BCM57708/800G NIC family is branded as ThorUltra.
Update the driver description accordingly.
Fixes: 74715c4ab0fa0 ("bng_en: Add PCI interface")
Signed-off-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20251217104748.3004706-1-rajashekar.hudumula@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Internally wiphy writes to individual channels in this structure,
so we must not share one static definition of channel list between
multiple device instances, because that causes hard to debug
breakage.
For example, with two rtw88 driven devices in the system, channel
information may get incoherent, preventing channel use.
Copied from commit 0ae36391c804 ("wifi: rtw89: Fix inadverent sharing
of struct ieee80211_supported_band data").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e94ad653-2b6d-4284-a33c-8c694f88955b@gmail.com
|
|
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1aa7fdef-2d5b-4a31-a4e9-fac8257ed30d@gmail.com
|
|
rtw_core_enable_beacon() reads 4 bytes from an address that is not a
multiple of 4. This results in a crash on some systems.
Do 1 byte reads/writes instead.
Unable to handle kernel paging request at virtual address ffff8000827e0522
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000
[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13
Internal error: Oops: 0000000096000021 [#1] SMP
Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]
CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY
Tainted: [W]=WARN
Hardware name: FriendlyElec NanoPC-T6 LTS (DT)
Workqueue: phy0 rtw_c2h_work [rtw88_core]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]
lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]
sp : ffff800080cc3ca0
x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828
x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00
x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001
x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522
Call trace:
rtw_pci_read32+0x18/0x40 [rtw88_pci] (P)
rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core]
rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core]
rtw_c2h_work+0x50/0x98 [rtw88_core]
process_one_work+0x178/0x3f8
worker_thread+0x208/0x418
kthread+0x120/0x220
ret_from_fork+0x10/0x20
Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Fixes: ad6741b1e044 ("wifi: rtw88: Stop high queue during scan")
Cc: stable@vger.kernel.org
Closes: https://github.com/lwfinger/rtw88/issues/418
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/6345300d-8c93-464c-9b05-d0d9af3c97ad@gmail.com
|
|
The driver reduces the RX gain while connected to a network located
close by. In this condition scans return few results because the more
distant networks can't be heard.
Temporarily increase the RX gain before scanning in order to detect
all available networks. Reset the RX gain back to the last recorded
value once the scan finishes.
Link: https://github.com/lwfinger/rtw88/issues/337
Signed-off-by: Martin Hrůza <martin.hruza123@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c2e72aff-190d-4f59-9914-2588de756385@gmail.com
|
|
For BE chips, needs to transmit QoS null data periodically to ensure
the connection with AP in GC+STA mode. However, in environments
with interference, the Qos null data might fail to transmit
successfully. Therefore, when receive the beacon from AP will
reset the QoS null data failure counter to avoid unnecessary
disconnection.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-13-pkshih@realtek.com
|
|
When initializing mac port, needs to set TBTT AGG number to trigger TBTT
related interrupts. Otherwise, after sending join info H2C command with
disconnection mode, firmware will clear TBTT AGG number. Without the
setting from mac port initialization after that, this port will not be
able to transmit beacons.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-12-pkshih@realtek.com
|
|
XTAL SI is an indirect serial interface to access registers in another
hardware domain. When BT driver initializes UART interface, firmware might
rarely control XTAL SI at the same time causing access racing.
Current is to adjust initialization flow to avoid the racing. To make
the racing visible if it still presents, add a message to address this.
USB adapters might be unplugged suddenly, causing flooding messages. Check
RTW89_FLAG_UNPLUGGED flag to avoid them.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-11-pkshih@realtek.com
|
|
The each of C2H reg event have different polling timeout. Refine the
LPS C2H reg event polling timeout. Otherwise, during SER, the FW has
already crashed, the leave LPS check will wait until timeout expires,
causing the SER recovery to take too long.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-10-pkshih@realtek.com
|
|
Original methods of SER (system error recovery) L0/L1 simulations need
to leave PS mode before working. Introduce new methods to simulate SER
L0/L1 and they can work under PS. Since new methods require FW support,
so add a FW feature flag and configure the supported chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-9-pkshih@realtek.com
|
|
Dump counters of SER (system error recoery) L0/L1 related cases.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-8-pkshih@realtek.com
|
|
Originally, polling FW status was required during recovering from L1.
Now, because newer FW support event mode, the polling can be skipped.
Add a FW feature flag and configure the supported chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-7-pkshih@realtek.com
|
|
After recovering from L1, explicitly enable error IMR to ensure next
L1 SER (system error recovery) can work normally.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-6-pkshih@realtek.com
|
|
To run power on function properly, reset power states (off/on/PS) to
initial state. Otherwise, it might be unusable due to fail to power on.
Since a USB adapter might play as USB mass storage with driver and then
switch to WiFi adapter, causing it stays on power-on state when doing WiFi
USB probe. Exclude this case.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-5-pkshih@realtek.com
|
|
Deauth frames used wrong link address after switching from default link
to another, causing AP to reject subsequent auth frames. This affected
not only deauth but all management frames. Fixed by setting correct
mac_id to let header conversion references correct address CAM.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-4-pkshih@realtek.com
|
|
Fix missing null-data 1 when switching links. The FW should send a
null-data 1 to notify AP before disabling the old link. Adjust the
position of the H2C rtw89_fw_h2c_mlo_link_cfg to ensure proper FW
behavior during link transition.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-3-pkshih@realtek.com
|
|
Intermittent beacon loss from a specific AP can lead to
disconnections. Increasing the beacon loss threshold
helps stabilize the connection.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-2-pkshih@realtek.com
|
|
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave().
Fixes: 342a93247e08 ("locking/spinlock: Provide RT variant header: <linux/spinlock_rt.h>")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251217085115.1730036-1-yeoreum.yun@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The LIBWX library code is what calls into phylink, so any user of
it has to select CONFIG_PHYLINK at the moment, with NGBEVF missing this:
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':
wx_ethtool.c:(.text+0x613): undefined reference to `phylink_ethtool_nway_reset'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_link_ksettings':
wx_ethtool.c:(.text+0x62b): undefined reference to `phylink_ethtool_ksettings_get'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_link_ksettings':
wx_ethtool.c:(.text+0x643): undefined reference to `phylink_ethtool_ksettings_set'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_pauseparam':
wx_ethtool.c:(.text+0x65b): undefined reference to `phylink_ethtool_get_pauseparam'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_pauseparam':
wx_ethtool.c:(.text+0x677): undefined reference to `phylink_ethtool_set_pauseparam'
Add the 'select PHYLINK' line in the libwx option directly so this will
always be enabled for all current and future wangxun drivers, and remove
the now duplicate lines.
Fixes: a0008a3658a3 ("net: wangxun: add ngbevf build")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251216213547.115026-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails.
Reported-by: syzbot+8dd915c7cb0490fc8c52@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52
Fixes: 4d12997a9bb3 ("drivers: net: usb: rtl8150: concurrent URB bugfix")
Signed-off-by: Deepakkumar Karn <dkarn@redhat.com>
Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the stress tests, early RX adaptation handshakes can fail, such
as missing the RX_ADAPT ACK or not receiving a coefficient update before
block lock is established. Continuing to retry RX adaptation in this
state is often ineffective if the current mode selection is not viable.
Resetting the RX adaptation retry counter when an RX_ADAPT request fails
to receive ACK or a coefficient update prior to block lock, and clearing
mode_set so the next bring-up performs a fresh mode selection rather
than looping on a likely invalid configuration.
Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251215151728.311713-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since airoha_probe() is not executed under rtnl lock, there is small race
where a given device is configured by user-space while the remaining ones
are not completely loaded from the dts yet. This condition will allow a
hw device misconfiguration since there are some conditions (e.g. GDM2 check
in airoha_dev_init()) that require all device are properly loaded from the
device tree. Fix the issue moving net_devices registration at the end of
the airoha_probe routine.
Fixes: 9cd451d414f6e ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251214-airoha-fix-dev-registration-v1-1-860e027ad4c6@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There has been a syzkaller bug reported recently with the following
trace:
list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:59!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59
Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ff
RSP: 0018:ffffc9000d49f370 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000
RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005
RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230
R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480
FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:132 [inline]
__list_del_entry include/linux/list.h:223 [inline]
list_del_rcu include/linux/rculist.h:178 [inline]
__team_queue_override_port_del drivers/net/team/team_core.c:826 [inline]
__team_queue_override_port_del drivers/net/team/team_core.c:821 [inline]
team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline]
team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534
team_option_set drivers/net/team/team_core.c:376 [inline]
team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653
genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2630
___sys_sendmsg+0x134/0x1d0 net/socket.c:2684
__sys_sendmsg+0x16d/0x220 net/socket.c:2716
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The problem is in this flow:
1) Port is enabled, queue_id != 0, in qom_list
2) Port gets disabled
-> team_port_disable()
-> team_queue_override_port_del()
-> del (removed from list)
3) Port is disabled, queue_id != 0, not in any list
4) Priority changes
-> team_queue_override_port_prio_changed()
-> checks: port disabled && queue_id != 0
-> calls del - hits the BUG as it is removed already
To fix this, change the check in team_queue_override_port_prio_changed()
so it returns early if port is not enabled.
Reported-by: syzbot+422806e5f4cce722a71f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=422806e5f4cce722a71f
Fixes: 6c31ff366c11 ("team: remove synchronize_rcu() called during queue override change")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251212102953.167287-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix typo received -> received by review.
Signed-off-by: Rohit Chourasia <chourasiarohit27@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251211161911.30611-1-chourasiarohit27@gmail.com
|
|
As ieee80211_tx_info is used to assist filling TX descriptor, and layout of
IEEE80211_SKB_CB(skb)->driver_data (accessing by RTW89_TX_SKB_CB()) is
union, so driver_data must be used by/after rtw89_hci_tx_write() or just
before calling rtw89_hci_tx_write(). Otherwise, ieee80211_tx_info::control
data is overwritten.
Found this by using injected packets which uses ieee80211_tx_info::control,
but always sending incorrect data rate.
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Fixes: d5da3d9fb05f ("wifi: rtw89: process TX wait skbs for USB via C2H handler")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251217072646.43209-1-pkshih@realtek.com
|
|
the device shows up like this and everything seams to work:
Bus 004 Device 003: ID 3625:010d Realtek 802.11ax WLAN Adapter
Signed-off-by: Jan Gerber <j@mailb.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251212005515.2059533-1-j@mailb.org
|
|
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251210101209.47176-1-marco.crivellari@suse.com
|
|
I have some rtl8922ae devices with no permanent mac stored in efuse.
It could be properly saved and/or configured from user tools like
NetworkManager, but it would be desirable to be able to initialize it
somehow to get the device working by default.
So, in the same way as with other devices, if the mac address read from
efuse contains zeros, a random mac address is assigned to at least allow
operation, and the user is warned about this in case any action needs to
be considered.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251126091905.217951-1-jtornosm@redhat.com
|
|
Add support for Mercusys MU6H AC650 High Gain Wireless Dual Band USB
Adapter V1.30. It is based on RTL8811CU, usb device ID is 2c4e:0105.
Signed-off-by: Hsiu-Ming Chang <cges30901@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251205003245.5762-1-cges30901@gmail.com
|
|
rtw8822b_set_antenna() can be called from userspace when the chip is
powered off. In that case a WARNING is triggered in
rtw8822b_config_trx_mode() because trying to read the RF registers
when the chip is powered off returns an unexpected value.
Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when
the chip is powered on.
------------[ cut here ]------------
write RF mode table fail
WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
Call Trace:
<TASK>
rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b]
rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb]
ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3]
nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? netdev_run_todo+0x63/0x550
genl_family_rcv_msg_doit+0xfc/0x160
genl_rcv_msg+0x1aa/0x2b0
? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
? refill_obj_stock+0x12e/0x240
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? do_syscall_64+0x81/0x970
? ksys_read+0x73/0xf0
? do_syscall_64+0x81/0x970
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
Link: https://github.com/lwfinger/rtw88/issues/366
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/fb9a3444-9319-4aa2-8719-35a6308bf568@gmail.com
|
|
The function rtw_set_dtim_period() accepted an 'int' dtim_period parameter,
while mac80211 provides dtim_period as 'u8' in struct ieee80211_bss_conf.
In IBSS (ad-hoc) mode mac80211 may set dtim_period to 0.
The driver unconditionally wrote (dtim_period - 1) to
REG_DTIM_COUNTER_ROOT, which resulted in 0xFF when dtim_period was 0. This
caused delays in broadcast/multicast traffic processing and issues with
ad-hoc operation.
Convert the function parameter to u8 to match ieee80211_bss_conf and avoid
the underflow by writing 0 when dtim_period is 0.
Link: https://github.com/lwfinger/rtw88/issues/406
Signed-off-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251125180937.22977-1-roman.peshkichev@gmail.com
|
|
When nvmem_cell_read() fails in mt798x_phy_calibration(), the function
returns without calling nvmem_cell_put(), leaking the cell reference.
Move nvmem_cell_put() right after nvmem_cell_read() to ensure the cell
reference is always released regardless of the read result.
Found via static analysis and code review.
Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251211081313.2368460-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In error paths, add fjes_hw_iounmap() to release the
resource acquired by fjes_hw_iomap(). Add a goto label
to do so.
Fixes: 8cdc3f6c5d22 ("fjes: Hardware initialization routine")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211073756.101824-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Aspeed MDIO controller may return incorrect data when a read operation
follows immediately after a write. Due to a controller bug, the subsequent
read can latch stale data, causing the polling logic to terminate earlier
than expected.
To work around this hardware issue, insert a dummy read after each write
operation. This ensures that the next actual read returns the correct
data and prevents premature polling exit.
This workaround has been verified to stabilize MDIO transactions on
affected Aspeed platforms.
Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251211-aspeed_mdio_add_dummy_read-v3-1-382868869004@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some SR9700 devices have an SPI flash chip containing a virtual driver
CD, in which case they appear as a device with two interfaces and
product ID 0x9702. Interface 0 is the driver CD and interface 1 is the
Ethernet device.
Link: https://github.com/name-kurniawan/usb-lan
Link: https://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=2185
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20251211062451.139036-1-enelsonmoore@gmail.com
[pabeni@redhat.com: fixes link tags]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-12-18
this is a pull request of 3 patches for net/main.
Tetsuo Handa contributes 2 patches to fix race windows in the j1939
protocol to properly handle disappearing network devices.
The last patch is by me, it fixes a build dependency with the CAN
drivers, that got introduced while fixing a dependency between the CAN
protocol and CAN device code.
linux-can-fixes-for-6.19-20251218
* tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: fix build dependency
can: j1939: make j1939_sk_bind() fail if device is no longer registered
can: j1939: make j1939_session_activate() fail if device is no longer registered
====================
Link: https://patch.msgid.link/20251218123132.664533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
when vf get ring info from mbx
Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps
equals rss_size. However, if the tc_num is greater than 1, then rss_size
will be less than num_tqps, causing the tqp_index check for subsequent TCs
using rss_size to always fail.
This patch uses the num_tqps to check whether tqp_index is out of range,
instead of rss_size.
Fixes: 326334aad024 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
