summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-11-12can: mcp251xfd: only configure PIN1 when rx_int is setGregor Herburger
When rx_int is used th mcp251xfd_chip_rx_int_enable and mcp251xfd_chip_rx_int_disable function configure both PIN0 and PIN1. To prepare the support of the GPIOS only configure PIN1 with regmap_update_bits. This way PIN0 can be used as GPIO while PIN1 is used as rx_int interrupt. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251001091006.4003841-5-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-11-12can: mcp251xfd: add workaround for errata 5Gregor Herburger
According to Errata DS80000789E 5 writing IOCON register using one SPI write command clears LAT0/LAT1. Errata Fix/Work Around suggests to write registers with single byte write instructions. However, it seems that every write to the second byte causes the overwrite of LAT0/LAT1. Never write byte 2 of IOCON register to avoid clearing of LAT0/LAT1. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251001091006.4003841-4-viken.dadhaniya@oss.qualcomm.com [mkl: add missing MCP251XFD_REG_IOCON_GPIO_MASK] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-11-12Merge tag 'arm64-fpsimd-on-stack-for-v6.19' into libcrypto-fpsimd-on-stackEric Biggers
Pull fpsimd-on-stack changes from Ard Biesheuvel: "Shared tag/branch for arm64 FP/SIMD changes going through libcrypto" Signed-off-by: Eric Biggers <ebiggers@kernel.org>
2025-11-12Merge tag 'wireless-next-2025-11-12' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== More -next material, notably: - split ieee80211.h file, it's way too big - mac80211: initial chanctx work towards NAN - mac80211: MU-MIMO sniffer improvements - ath12k: statistics improvements * tag 'wireless-next-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (26 commits) wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper() wifi: mac80211: make monitor link info check more specific wifi: mac80211: track MU-MIMO configuration on disabled interfaces wifi: cfg80211/mac80211: Add fallback mechanism for INDOOR_SP connection wifi: cfg80211/mac80211: clean up duplicate ap_power handling wifi: cfg80211: use a C99 initializer in wiphy_register wifi: cfg80211: fix doc of struct key_params wifi: mac80211: remove unnecessary vlan NULL check wifi: mac80211: pass frame type to element parsing wifi: mac80211: remove "disabling VHT" message wifi: mac80211: add and use chanctx usage iteration wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() API wifi: mac80211: remove chanctx to link back-references wifi: mac80211: make link iteration safe for 'break' wifi: mac80211: fix EHT typo wifi: cfg80211: fix EHT typo wifi: ieee80211: split NAN definitions out wifi: ieee80211: split P2P definitions out wifi: ieee80211: split S1G definitions out wifi: ieee80211: split EHT definitions out ... ==================== Link: https://patch.msgid.link/20251112115126.16223-4-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-12Merge tag 'wireless-2025-11-12' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Couple more fixes: - mwl8k: work around FW expecting a DSSS element in beacons - ath11k: report correct TX status - iwlwifi: avoid toggling links due to wrong element use - iwlwifi: fix beacon template rate on older devices - iwlwifi: fix loop iterator being used after loop - mac80211: disallow address changes while using the address - mac80211: avoid bad rate warning in monitor/sniffer mode - hwsim: fix potential NULL deref (on monitor injection) * tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mld: always take beacon ies in link grading wifi: iwlwifi: mvm: fix beacon template/fixed rate wifi: iwlwifi: fix aux ROC time event iterator usage wifi: mwl8k: inject DSSS Parameter Set element into beacons if missing wifi: mac80211_hwsim: Fix possible NULL dereference wifi: mac80211: skip rate verification for not captured PSDUs wifi: mac80211: reject address change while connecting wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp() ==================== Link: https://patch.msgid.link/20251112114621.15716-5-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-12net: stmmac: improve ndev->max_mtu setup readabilityRussell King (Oracle)
Improve the readibility of the code setting ndev->max_mtu. This depends on the hardware specific maximum defined by the MAC core, and also a platform provided maximum. The code was originally checking that the platform specific maximum was between ndev->min_mtu..MAC core maximum before reducing ndev->max_mtu, otherwise if the platform specific maximum was less than ndev->min_mtu, issuing a warning. Re-order the code to handle the case where the platform specific max is below ndev->min_mtu, which then means that the subsequent test is simply reducing ndev->max_mtu. Update the comment, and add a few blank lines to separate the blocks of code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vImWA-0000000DrIl-1HZY@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-12r8169: add support for RTL8125Kjaven
This adds support for chip RTL8125K. Its XID is 0x68a. It is basically based on the one with XID 0x688, but with different firmware file. Signed-off-by: javen <javen_xu@realsil.com.cn> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20251111092851.3371-1-javen_xu@realsil.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-12Merge tag 'ath-next-20251111' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git patches for v6.19 (#2) Just one 2-patch series for this PR. Once pulled into wireless-next, ath-next will fast-forward, and that will provide the baseline for merging ath12k-ng into ath-next. ================== Link: https://patch.msgid.link/15a98cae-0274-45f4-9b8e-be6fa9720884@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-12net/mlx5: Switch to more abstract scoped ksimd guard API on arm64Ard Biesheuvel
Instead of calling kernel_neon_begin/end directly, switch to the scoped guard API which encapsulates those calls. This is needed because the prototypes of those APIs are going to be modified and will require a kernel mode FP/SIMD buffer to be provided, which the scoped guard API will do transparently. Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Tariq Toukan <tariqt@nvidia.com> Cc: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-11-12can: mcp251xfd: utilize gather_write function for all non-CRC writesGregor Herburger
This is a preparation patch to add errata workaround for non crc writes. Currently for non-crc writes to the chip can go through the .gather_write, .write or the reg_update_bits callback. To allow the addition of the errata fix at a single location use mcp251xfd_regmap_nocrc_gather_write for all non-CRC write instructions, similar to the crc regmap. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251001091006.4003841-3-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-11-12can: mcp251xfd: move chip sleep mode into runtime pmMarc Kleine-Budde
This is a preparation patch to add GPIO support. Up to now, the Vdd regulator and the clocks have been managed by Runtime-PM (on systems without CONFIG_PM these remain permanently switched on). During the mcp251xfd_open() callback the mcp251xfd is powered, soft-reset and configured. In mcp251xfd_stop() the chip is shut down again. To support the on-chip GPIOs, the chip must be supplied with power while GPIOs are being requested, even if the networking interface is down. To support this, move the functions mcp251xfd_chip_softreset() and mcp251xfd_chip_clock_init() from mcp251xfd_chip_start() to mcp251xfd_runtime_resume(). Instead of setting the controller to sleep mode in mcp251xfd_chip_stop(), bring it into configuration mode. This way it doesn't take part in bus activity and doesn't enter sleep mode. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251001091006.4003841-2-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-11-12wifi: iwlwifi: mld: always take beacon ies in link gradingMiri Korenblit
One of the factors of a link's grade is the channel load, which is calculated from the AP's bss load element. The current code takes this element from the beacon for an active link, and from bss->ies for an inactive link. bss->ies is set to either the beacon's ies or to the probe response ones, with preference to the probe response (meaning that if there was even one probe response, the ies of it will be stored in bss->ies and won't be overiden by the beacon ies). The probe response can be very old, i.e. from the connection time, where a beacon is updated before each link selection (which is triggered only after a passive scan). In such case, the bss load element in the probe response will not include the channel load caused by the STA, where the beacon will. This will cause the inactive link to always have a lower channel load, and therefore an higher grade than the active link's one. This causes repeated link switches, causing the throughput to drop. Fix this by always taking the ies from the beacon, as those are for sure new. Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251110145652.b493dbb1853a.I058ba7309c84159f640cc9682d1bda56dd56a536@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-11-12wifi: iwlwifi: mvm: fix beacon template/fixed rateJohannes Berg
During the development of the rate changes, I evidently made some changes that shouldn't have been there; beacon templates with rate_n_flags are only in old versions, so no changes to them should have been necessary, and evidently broke on some devices. This also would have broken fixed (injection) rates, it would seem. Restore the old handling of this. Fixes: dabc88cb3b78 ("wifi: iwlwifi: handle v3 rates") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220558 Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20251008112044.3bb8ea849d8d.I90f4d2b2c1f62eaedaf304a61d2ab9e50c491c2d@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-11-12wifi: iwlwifi: fix aux ROC time event iterator usageJunjie Cao
The list_for_each_entry() iterator must not be used outside the loop. Even though we break and check for NULL, doing so still violates kernel iteration rules and triggers Coccinelle's use_after_iter.cocci warning. Cache the matched entry in aux_roc_te and use it consistently after the loop. This follows iterator best practices, resolves the warning, and makes the code more maintainable. Signed-off-by: Junjie Cao <junjie.cao@intel.com> Link: https://patch.msgid.link/20251016014919.383565-1-junjie.cao@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-11-11net: sparx5/lan969x: populate netdev of_nodeRobert Marko
Populate of_node for the port netdevs, to make the individual ports of_nodes available in sysfs. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://patch.msgid.link/20251110124342.199216-1-robert.marko@sartura.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11net: stmmac: meson8b: use stmmac_get_phy_intf_sel()Russell King (Oracle)
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the phy_intf_sel value, validate the result and use that to set the control register to select the operating mode for the DWMAC core. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vIT6b-0000000DpPX-1LQ0@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11net: stmmac: meson8b: use phy_intf_sel directlyRussell King (Oracle)
Rearrange meson_axg_set_phy_mode() to use phy_intf_sel directly, converting it to the register field for meson8b_dwmac_mask_bits(). Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vIT6W-0000000DpPR-0tby@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11net: stmmac: meson8b: use PHY_INTF_SEL_xRussell King (Oracle)
Use PHY_INTF_SEL_x definitions for phy_intf_sel bitfield. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vIT6R-0000000DpPL-0Nli@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11net: netcp: ethss: Fix type of first parameter in hwtstamp stubsNathan Chancellor
When building without CONFIG_TI_CPTS, there are a series of errors from -Wincompatible-pointer-types: drivers/net/ethernet/ti/netcp_ethss.c:3831:27: error: initialization of 'int (*)(void *, struct kernel_hwtstamp_config *)' from incompatible pointer type 'int (*)(struct gbe_intf *, struct kernel_hwtstamp_config *)' [-Wincompatible-pointer-types] 3831 | .hwtstamp_get = gbe_hwtstamp_get, | ^~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/netcp_ethss.c:3831:27: note: (near initialization for 'gbe_module.hwtstamp_get') drivers/net/ethernet/ti/netcp_ethss.c:2758:19: note: 'gbe_hwtstamp_get' declared here 2758 | static inline int gbe_hwtstamp_get(struct gbe_intf *gbe_intf, | ^~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/netcp_ethss.c:3832:27: error: initialization of 'int (*)(void *, struct kernel_hwtstamp_config *, struct netlink_ext_ack *)' from incompatible pointer type 'int (*)(struct gbe_intf *, struct kernel_hwtstamp_config *, struct netlink_ext_ack *)' [-Wincompatible-pointer-types] 3832 | .hwtstamp_set = gbe_hwtstamp_set, | ^~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/netcp_ethss.c:3832:27: note: (near initialization for 'gbe_module.hwtstamp_set') drivers/net/ethernet/ti/netcp_ethss.c:2764:19: note: 'gbe_hwtstamp_set' declared here 2764 | static inline int gbe_hwtstamp_set(struct gbe_intf *gbe_intf, | ^~~~~~~~~~~~~~~~ In a recent conversion to ndo_hwtstamp, the type of the first parameter was updated for the CONFIG_TI_CPTS=y implementations of gbe_hwtstamp_get() and gbe_hwtstamp_set() but not the CONFIG_TI_CPTS=n ones. Update the type of the first parameter in the CONFIG_TI_CPTS=n stubs to resolve the errors. Fixes: 3f02b8272557 ("ti: netcp: convert to ndo_hwtstamp callbacks") Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20251110-netcp_ethss-fix-cpts-stubs-clang-wifpts-v2-1-aa6204ec1f43@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11wifi: ath12k: Remove Wi-Fi 7 header dependencies from common ath12k moduleAlok Singh
Remove all remaining Wi-Fi 7 header dependencies from dp_mon.c to finalize separation of Wi-Fi 7 specific monitor mode functionality. Remove these includes from dp_mon.c: - wifi7/hal_desc.h - wifi7/hal_qcn9274.h - wifi7/dp_rx.h Relocate hal_mon_buf_ring from wifi7/hal_desc.h to hal.h. Relocate HAL_RX_UL_OFDMA_USER_INFO_V0_W0_VALID and HAL_RX_FCS_LEN macros from wifi7/hal_rx.h to hal.h or dp_rx.h as appropriate. Move the following functions to the new file wifi7/dp_mon.c and add the ath12k_wifi7 prefix: - ath12k_dp_mon_rx_merg_msdus() - ath12k_dp_mon_update_radiotap() - ath12k_dp_mon_rx_deliver_msdu() - ath12k_dp_mon_get_buf_len() - ath12k_dp_mon_rx_deliver() Export several helper functions needed by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-13-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move MSDU END TLV processing to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific monitor handling from ath12k common code to improve modularity. Move the following MSDU END TLV processing functions into wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix: - ath12k_dp_mon_parse_rx_msdu_end_err() - ath12k_dp_mon_parse_status_msdu_end() - ath12k_dp_mon_next_link_desc_get() Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-12-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move MU user processing to Wi-Fi 7 moduleAlok Singh
Move Wi-Fi 7-specific monitor functionality out of ath12k common code into the Wi-Fi 7 module to improve modularity. Move and rename the following MU user processing functions to wifi7/dp_mon.c with the ath12k_wifi7_ prefix: - ath12k_dp_mon_rx_handle_ofdma_info() - ath12k_dp_mon_rx_populate_mu_user_info() - ath12k_dp_mon_hal_rx_parse_user_info() Move the helper functions hal_rx_mon_hal_ru_size_to_ath12k_ru_size and hal_rx_ul_ofdma_ru_size_to_width to the Wi-Fi 7 module, and export the helpers required by the ath12k_wifi7 code. Isolate the parsing of MU-specific user information within the Wi-Fi 7 module to keep common code generic. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-11-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move remaining SIG TLV parsing to Wi-Fi 7 moduleAlok Singh
The ath12k common monitor path still contains Wi-Fi 7 specific SIG TLV parsing. Move these SIG TLV parsing to the Wi-Fi 7 module to improve modularity. Relocate the following functions into wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix: - ath12k_dp_mon_parse_l_sig_b() - ath12k_dp_mon_parse_l_sig_a() - ath12k_dp_mon_hal_rx_parse_u_sig_cmn() - ath12k_dp_mon_hal_rx_parse_u_sig_tb() - ath12k_dp_mon_hal_rx_parse_u_sig_mu() - ath12k_dp_mon_hal_rx_parse_u_sig_hdr() Export the helper symbols needed by the Wi-Fi 7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-10-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move EHT SIG processing to Wi-Fi 7 moduleAlok Singh
Split Wi-Fi 7 specific EHT SIG parsing out of ath12k common code into the Wi-Fi 7 module to improve modularity. Move the following EHT SIG processing functions to wifi7/dp_mon.c and add the ath12k_wifi7 prefix to each relocated function. - ath12k_dp_mon_hal_aggr_tlv() - ath12k_dp_mon_hal_rx_is_frame_type_ndp() - ath12k_dp_mon_hal_rx_is_non_ofdma() - ath12k_dp_mon_hal_rx_is_ofdma() - ath12k_dp_mon_hal_rx_parse_eht_sig_ndp() - ath12k_dp_mon_hal_rx_parse_usig_overflow() - ath12k_dp_mon_hal_rx_parse_non_ofdma_users() - ath12k_dp_mon_hal_rx_parse_eht_mumimo_user() - ath12k_dp_mon_hal_rx_parse_eht_non_mumimo_user() - ath12k_dp_mon_hal_rx_is_mu_mimo_user() - ath12k_dp_mon_hal_rx_parse_eht_sig_non_ofdma() - ath12k_dp_mon_hal_rx_parse_ru_allocation() - ath12k_dp_mon_hal_rx_parse_eht_sig_ofdma() - ath12k_dp_mon_parse_eht_sig_hdr() Export helper functions needed by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-9-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move HE SIG processing to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific monitor code from ath12k common code to improve modularity. Move following HE SIG processing functions to the wifi7/dp_mon.c and rename the relocated functions with the ath12k_wifi7 prefix: - ath12k_dp_mon_parse_he_sig_b2_ofdma() - ath12k_dp_mon_parse_he_sig_b2_mu() - ath12k_dp_mon_parse_he_sig_b1_mu() - ath12k_dp_mon_parse_he_sig_mu() - ath12k_dp_mon_parse_he_sig_su() Export helper functions required by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-8-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move HT/VHT SIG processing to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific monitor parsing from ath12k common code to improve modularity and keep Wi-Fi 7 logic within the Wi-Fi 7 module. Move following HT/VHT SIG parsing functions to wifi7/dp_mon.c and rename the functions with the ath12k_wifi7 prefix: - ath12k_dp_mon_parse_vht_sig_a() - ath12k_dp_mon_parse_ht_sig() Export helper functions required by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-7-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move TX monitor functionality to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific TX monitor functionality from ath12k common code to improve modularity and maintainability. Move following TX monitor processing functions to wifi7/dp_mon.c and rename the functions with the ath12k_wifi7_ prefix: - ath12k_dp_mon_tx_get_ppdu_info() - ath12k_dp_mon_hal_tx_ppdu_info() - ath12k_dp_mon_tx_alloc_skb() - ath12k_dp_mon_tx_gen_cts2self_frame() - ath12k_dp_mon_tx_gen_rts_frame() - ath12k_dp_mon_tx_gen_3addr_qos_null_frame() - ath12k_dp_mon_tx_gen_4addr_qos_null_frame() - ath12k_dp_mon_tx_gen_ack_frame() - ath12k_dp_mon_tx_gen_prot_frame() - ath12k_dp_mon_tx_parse_status_tlv() - ath12k_dp_mon_tx_status_get_num_user() - ath12k_dp_mon_tx_process_ppdu_info() - ath12k_dp_mon_tx_parse_mon_status() Export helper functions required by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-6-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move RX status TLV parsing to Wi-Fi 7 moduleAlok Singh
Split Wi-Fi 7-specific monitor code out of ath12k common code to improve modularity. Move following RX status TLV parsing functions to the new file wifi7/dp_mon.c and rename the helpers with the ath12k_wifi7_ prefix: - ath12k_dp_mon_rx_parse_status_tlv() - ath12k_dp_mon_parse_rx_dest_tlv() Export helper functions required by the Wi-Fi 7 module. Temporarily include wifi7/hal_rx.h from dp_mon.h to provide HAL structure definitions; remove this dependency in a later patch. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-5-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move MPDU pop functionality to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific monitor code from ath12k common code to improve modularity. Move the following monitor MPDU pop function to the new file wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix: - ath12k_dp_rx_mon_mpdu_pop() Export helper functions required by the ath12k_wifi7 module. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-4-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move monitor status processing to Wi-Fi 7 moduleAlok Singh
Split Wi-Fi 7-specific monitor status processing out of ath12k common code and into the Wi-Fi 7 module to improve modularity. Move the following functions to wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix: - ath12k_dp_mon_rx_parse_mon_status() - ath12k_dp_rx_reap_mon_status_ring() - ath12k_dp_mon_parse_rx_dest() - ath12k_dp_rx_mon_buf_done() - ath12k_dp_rx_mon_dest_process() - ath12k_dp_mon_rx_memset_ppdu_info() Export helper functions required by the Wi-Fi 7 monitor path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-3-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11wifi: ath12k: Move monitor ring processing to Wi-Fi 7 moduleAlok Singh
Separate Wi-Fi 7-specific monitor-mode processing from common ath12k data path code to improve modularity. Move monitor status ring processing to wifi7/dp_mon.c: - ath12k_dp_mon_srng_process() - __ath12k_dp_mon_process_ring() - ath12k_dp_mon_process_ring() Rename the above to use the ath12k_wifi7_ prefix and export helper functions required by the ath12k_wifi7 module. Update the Wi-Fi 7 module Makefile to build dp_mon.o. No functional changes are intended; this is preparatory refactoring to isolate Wi-Fi 7 monitor-mode code from shared ath12k code. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Alok Singh <quic_aloksing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251110103713.3484779-2-quic_aloksing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11mlx5: Fix default values in create CQAkiva Goldberger
Currently, CQs without a completion function are assigned the mlx5_add_cq_to_tasklet function by default. This is problematic since only user CQs created through the mlx5_ib driver are intended to use this function. Additionally, all CQs that will use doorbells instead of polling for completions must call mlx5_cq_arm. However, the default CQ creation flow leaves a valid value in the CQ's arm_db field, allowing FW to send interrupts to polling-only CQs in certain corner cases. These two factors would allow a polling-only kernel CQ to be triggered by an EQ interrupt and call a completion function intended only for user CQs, causing a null pointer exception. Some areas in the driver have prevented this issue with one-off fixes but did not address the root cause. This patch fixes the described issue by adding defaults to the create CQ flow. It adds a default dummy completion function to protect against null pointer exceptions, and it sets an invalid command sequence number by default in kernel CQs to prevent the FW from sending an interrupt to the CQ until it is armed. User CQs are responsible for their own initialization values. Callers of mlx5_core_create_cq are responsible for changing the completion function and arming the CQ per their needs. Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Leon Romanovsky <leon@kernel.org> Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5e: Fix potentially misleading debug messageGal Pressman
Change the debug message to print the correct units instead of always assuming Gbps, as the value can be in either 100 Mbps or 1 Gbps units. Fixes: 5da8bc3effb6 ("net/mlx5e: DCBNL, Add debug messages log") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-6-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5e: Fix wraparound in rate limiting for values above 255 GbpsGal Pressman
Add validation to reject rates exceeding 255 Gbps that would overflow the 8 bits max bandwidth field. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-5-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5e: Fix maxrate wraparound in threshold between unitsGal Pressman
The previous calculation used roundup() which caused an overflow for rates between 25.5Gbps and 26Gbps. For example, a rate of 25.6Gbps would result in using 100Mbps units with value of 256, which would overflow the 8 bits field. Simplify the upper_limit_mbps calculation by removing the unnecessary roundup, and adjust the comparison to use <= to correctly handle the boundary condition. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5e: Trim the length of the num_doorbell errorCosmin Ratiu
When trying to set num_doorbells to a value greater than the max number of channels, the error message was going over the netlink limit of 80 chars, truncating the most important part of the message, the number of channels. Fix that by trimming the length a bit. Fixes: 11bbcfb7668c ("net/mlx5e: Use the 'num_doorbells' devlink param") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-3-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5e: Fix missing error assignment in mlx5e_xfrm_add_state()Carolina Jubran
Assign the return value of mlx5_eswitch_block_mode() to 'err' before checking it to avoid returning an uninitialized error code. Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202510271649.uwsIxD6O-lkp@intel.com/ Closes: http://lore.kernel.org/linux-rdma/aPIEK4rLB586FdDt@stanley.mountain/ Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-2-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5: E-Switch, support eswitch inactive modeSaeed Mahameed
Add support for eswitch switchdev inactive mode Inactive mode: Drop all traffic going to FDB, Remove mpfs l2 rules and disconnect adjacent vports. Active mode: Traffic flows through FDB, mpfs table populated, and adjacent vports are connected. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251108070404.1551708-4-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5: MPFS, add support for dynamic enable/disableSaeed Mahameed
MPFS (Multi PF Switch) is enabled by default in Multi-Host environments, the driver keeps a list of desired unicast mac addresses of all vports (vfs/Sfs) and applied to HW via L2_table FW command. Add API to dynamically apply the list of MACs to HW when needed for next patches, to utilize this new API in devlink eswitch active/in-active uAPI. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251108070404.1551708-3-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11wifi: mwl8k: inject DSSS Parameter Set element into beacons if missingPawel Dembicki
Some Marvell AP firmware used with mwl8k misbehaves when beacon frames do not contain a WLAN_EID_DS_PARAMS element with the current channel. It was reported on OpenWrt Github issues [0]. When hostapd/mac80211 omits DSSS Parameter Set from the beacon (which is valid on some bands), the firmware stops transmitting sane frames and RX status starts reporting bogus channel information. This makes AP mode unusable. Newer Marvell drivers (mwlwifi [1]) hard-code DSSS Parameter Set into AP beacons for all chips, which suggests this is a firmware requirement rather than a mwl8k-specific quirk. Mirror that behaviour in mwl8k: when setting the beacon, check if WLAN_EID_DS_PARAMS is present, and if not, extend the beacon and inject a DSSS Parameter Set element, using the current channel from hw->conf.chandef.chan. Tested on Linksys EA4500 (88W8366). [0] https://github.com/openwrt/openwrt/issues/19088 [1] https://github.com/kaloz/mwlwifi/blob/db97edf20fadea2617805006f5230665fadc6a8c/hif/fwcmd.c#L675 Fixes: b64fe619e371 ("mwl8k: basic AP interface support") Tested-by: Antony Kolitsos <zeusomighty@hotmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://patch.msgid.link/20251111100733.2825970-3-paweldembicki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper()Abdun Nihaal
In one of the error paths, the memory allocated for skb_rx is not freed. Fix that by freeing it before returning. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Link: https://patch.msgid.link/20251110175316.106591-1-nihaal@cse.iitm.ac.in Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11wifi: mac80211_hwsim: Fix possible NULL dereferenceIlan Peer
The 'vif' pointer in the Tx information might be NULL, e.g., in case of injected frames etc. and is not checked in all paths. Fix it. While at it, also directly use the local 'vif' pointer. Fixes: a37a6f54439b ("wifi: mac80211_hwsim: Add simulation support for NAN device") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aNJUlyIiSTW9zZdr@stanley.mountain Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251110140128.ec00ae795a32.I9c65659b52434189d8b2ba06710d482669a3887a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11Merge tag 'ath-current-20251110' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git update for v6.18-rc6 Fix an ath11k transmit status reporting issue. This issue has always been present, but not reported until recently. Bringing this through the current release since there is now a userspace entity that wants to leverage this. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-10net: dsa: loop: use new helper fixed_phy_register_100fd to simplify the codeHeiner Kallweit
Use new helper fixed_phy_register_100fd to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/922f1b45-1748-4dd2-87eb-9d018df44731@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: mdio: fix resource leak in mdiobus_register_device()Buday Csaba
Fix a possible leak in mdiobus_register_device() when both a reset-gpio and a reset-controller are present. Clean up the already claimed reset-gpio, when the registration of the reset-controller fails, so when an error code is returned, the device retains its state before the registration attempt. Link: https://lore.kernel.org/all/20251106144603.39053c81@kernel.org/ Fixes: 71dd6c0dff51 ("net: phy: add support for reset-controller") Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/4b419377f8dd7d2f63f919d0f74a336c734f8fff.1762584481.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11wifi: rtlwifi: rtl8188ee: correct allstasleep in P2P PS H2C commandPing-Ke Shih
The "->allstasleep" variable is a 1 bit bitfield. It can only be 0 or 1. This "= -1" assignement should be "= 0" as other chips and vendor driver. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/5c992936-4e7b-4c0a-abfc-0ec0fb9ef9fd@suswa.mountain/T/#t Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1762390172-21091-1-git-send-email-pkshih@realtek.com
2025-11-11wifi: rtw89: Enable the new rtw89_8852au moduleBitterblue Smith
Tested in station mode and a little in AP mode. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/180a5e77-9297-4ffc-80d5-191dfef47661@gmail.com
2025-11-11wifi: rtw89: Add rtw8852au.cBitterblue Smith
This is the entry point of the new rtw89_8852au module. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/9580e5be-2bd1-45f9-ab75-616b86e25694@gmail.com
2025-11-11wifi: rtw89: 8852a: Accept USB devices and load their MAC addressBitterblue Smith
Make rtw8852a_read_efuse() accept USB devices and load the MAC address from the correct offset. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/97412e2c-ac98-403c-9056-9d9fe1ed9f28@gmail.com
2025-11-11wifi: rtw89: Add rtw8852a_hfc_param_ini_usbBitterblue Smith
"hfc" means "hci fc" which is "Host Control Interface Flow Control". These are some parameters needed for RTL8852AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d1032888-2a53-4c52-a8b9-6e00cd6758dc@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-06 20:53:12 +0000