| Age | Commit message (Collapse) | Author |
|---|
|
Corrected the dev_warn format string:
- "Vlan id %d\n is not added" -> "Vlan id %d is not added\n"
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Corrected function reference:
- "proc_autoc_read_82599" -> "prot_autoc_read_82599"
Fixed spelling of:
- "big-enian" -> "big-endian"
- "Virtualiztion" -> "Virtualization"
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove duplicate defines from the OR operation when defining IDPF_CAP_RSS.
Duplicate definitions were introduced when IDPF_CAP_RSS was originally
defined and were left behind and went unnoticed during a previous commit
that renamed them. Review of the original out-of-tree code confirms these
duplicates were the result of a typing error.
Remove the duplicates to clean up the code and avoid potential confusion.
Also verify no other duplicate occurrences of these defines exist
elsewhere in the codebase.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Multiple sources can request VF link state changes with identical
parameters. For example, OpenStack Neutron may request to set the VF link
state to IFLA_VF_LINK_STATE_AUTO during every initialization or user can
issue: `ip link set <ifname> vf 0 state auto` multiple times. Currently,
the i40e driver processes each of these requests, even if the requested
state is the same as the current one. This leads to unnecessary VF resets
and can cause performance degradation or instability in the VF driver,
particularly in environment using Data Plane Development Kit (DPDK).
With this patch i40e will skip VF link state change requests when the
desired link state matches the current configuration. This prevents
unnecessary VF resets and reduces PF-VF communication overhead.
To reproduce the problem run following command multiple times
on the same interface: 'ip link set <ifname> vf 0 state auto'
Every time command is executed, PF driver will trigger VF reset.
Co-developed-by: Robert Malz <robert.malz@canonical.com>
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add E825C 10GbE SGMII device to the list of devices supporting 100Mbit
link mode. Without that change, 100Mbit link mode is ignored in ethtool
interface. This change was missed while adding the support for E825C
devices family.
Testing hints (please note, for previous version, 100baseT/Full entry
was missing):
[root@localhost]# ethtool eth3
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: None
Advertised link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
...
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add second page_pool for header buffers to each Rx queue and ability
to toggle the header split on/off using Ethtool (default to off to
match the current behaviour).
Unlike idpf, all HW backed up by ice doesn't require any W/As and
correctly splits all types of packets as configured: after L4 headers
for TCP/UDP/SCTP, after L3 headers for other IPv4/IPv6 frames, after
the Ethernet header otherwise (in case of tunneling, same as above,
but after innermost headers).
This doesn't affect the XSk path as there are no benefits of having
it there.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch completes the transition of the ice driver to use the Page Pool
and libeth APIs, following the same direction as commit 5fa4caff59f2
("iavf: switch to Page Pool"). With the legacy page splitting and recycling
logic already removed, the driver is now in a clean state to adopt the
modern memory model.
The Page Pool integration simplifies buffer management by offloading
DMA mapping and recycling to the core infrastructure. This eliminates
the need for driver-specific handling of headroom, buffer sizing, and
page order. The libeth helper is used for CPU-side processing, while
DMA-for-device is handled by the Page Pool core.
Additionally, this patch extends the conversion to cover XDP support.
The driver now uses libeth_xdp helpers for Rx buffer processing,
and optimizes XDP_TX by skipping per-frame DMA mapping. Instead, all
buffers are mapped as bi-directional up front, leveraging Page Pool's
lifecycle management. This significantly reduces overhead in virtualized
environments.
Performance observations:
- In typical scenarios (netperf, XDP_PASS, XDP_DROP), performance remains
on par with the previous implementation.
- In XDP_TX mode:
* With IOMMU enabled, performance improves dramatically - over 5x
increase - due to reduced DMA mapping overhead and better memory reuse.
* With IOMMU disabled, performance remains comparable to the previous
implementation, with no significant changes observed.
- In XDP_DROP mode:
* For small MTUs, (where multiple buffers can be allocated on a single
memory page), a performance drop of approximately 20% is observed.
According to 'perf top' analysis, the bottleneck is caused by atomic
reference counter increments in the Page Pool.
* For normal MTUs, (where only one buffer can be allocated within a
single memory page), performance remains comparable to baseline
levels.
This change is also a step toward a more modular and unified XDP
implementation across Intel Ethernet drivers, aligning with ongoing
efforts to consolidate and streamline feature support.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As part of the transition toward Page Pool integration, remove the
legacy page splitting and recycling logic from the ice driver. This
mirrors the approach taken in commit 920d86f3c552 ("iavf: drop page
splitting and recycling").
The previous model attempted to reuse partially consumed pages by
splitting them and tracking their usage across descriptors. While
this was once a memory optimization, it introduced significant
complexity and overhead in the Rx path, including:
- Manual refcount management and page reuse heuristics;
- Per-descriptor buffer shuffling, which could involve moving dozens
of `ice_rx_buf` structures per NAPI cycle;
- Increased branching and cache pressure in the hotpath.
This change simplifies the Rx logic by always allocating fresh pages
and letting the networking stack handle their lifecycle. Although this
may temporarily reduce performance (up to ~98% in some XDP cases), it
greatly improves maintainability and paves the way for Page Pool,
which will restore and exceed previous performance levels.
The `ice_rx_buf` array is retained for now to minimize diffstat and
ease future replacement with a shared buffer abstraction.
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 53844673d555 ("iavf: kill 'legacy-rx' for good") removed
the legacy Rx path in the iavf driver. This change applies the same
rationale to the ice driver.
The legacy Rx path relied on manual skb allocation and header copying,
which has become increasingly inefficient and difficult to maintain.
With the stabilization of build_skb() and the growing adoption of
features like XDP, page_pool, and multi-buffer support, the legacy
approach is no longer viable.
Key drawbacks of the legacy path included:
- Higher memory pressure due to direct page allocations and splitting;
- Redundant memcpy() operations for packet headers;
- CPU overhead from eth_get_headlen() and Flow Dissector usage;
- Compatibility issues with XDP, which imposes strict headroom and
tailroom requirements.
The ice driver, like iavf, does not benefit from the minimal headroom
savings that legacy Rx once offered, as it already splits pages into
fixed halves. Removing this path simplifies the Rx logic, eliminates
unnecessary branches in the hotpath, and prepares the driver for
upcoming enhancements.
In addition to removing the legacy Rx path, this change also eliminates
the custom construct_skb() functions from both the standard and
zero-copy (ZC) Rx paths. These are replaced with the build_skb()
and standardized xdp_build_skb_from_zc() helpers, aligning the driver
with the modern XDP infrastructure and reducing code duplication.
This cleanup also reduces code complexity and improves maintainability
as we move toward a more unified and modern Rx model across drivers.
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This reverts commit 4b66d18918f8e4d85e51974a9e3ce9abad5c7c3d.
In [1], Ross Brown reports poor performance of WCN7850 after enabling
power save. Temporarily revert the fix; it will be re-enabled once
the issue is resolved.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 4b66d18918f8 ("wifi: ath12k: Fix missing station power save configuration")
Reported-by: Ross Brown <true.robot.ross@gmail.com>
Closes: https://lore.kernel.org/all/CAMn66qZENLhDOcVJuwUZ3ir89PVtVnQRq9DkV5xjJn1p6BKB9w@mail.gmail.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028060744.897198-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
current, driver will call netif_device_detach() in
pci_error_handlers.error_detected() and do reset in
pci_error_handlers.slot_reset().
However, if pci_error_handlers.slot_reset() is not called
after pci_error_handlers.error_detected(),
driver will be detached and unable to recover.
drivers/pci/pcie/err.c/report_error_detected() says:
If any device in the subtree does not have an error_detected
callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
error callbacks of any device in the subtree, and will
exit in the disconnected error state.
Therefore, when the hibmcge device and other devices that do not
support the error_detected callback are under the same subtree,
hibmcge will be unable to do slot_reset even for non-fatal errors.
This path move netif_device_detach() from error_detected() to slot_reset(),
ensuring that detach and reset are always executed together.
Fixes: fd394a334b1c ("net: hibmcge: Add support for abnormal irq handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20251025014642.265259-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy.
hibmcge driver uses fixed_phy to configure scenarios without PHY,
where the driver is always in a linked state. However,
there might be no link in hardware, so the np_link error
is detected in hbg_hw_adjust_link(), which can cause abnormal logs.
Therefore, in scenarios without a PHY, the driver no longer
checks the np_link status.
Fixes: 1d7cd7a9c69c ("net: hibmcge: support scenario without PHY")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20251025014642.265259-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq initialized with the macro HBG_ERR_IRQ_I will automatically
be re-enabled, whereas those initialized with the macro HBG_IRQ_I
will not be re-enabled.
Since the rx buf avl irq is initialized using the macro HBG_IRQ_I,
it needs to be actively re-enabled;
otherwise priv->stats.rx_fifo_less_empty_thrsld_cnt cannot be
correctly incremented.
Fixes: fd394a334b1c ("net: hibmcge: Add support for abnormal irq handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251025014642.265259-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LED registers on YT8531 are exactly same as YT8521, so simply
reuse yt8521_led_hw_* functions.
Tested on OrangePi R1 Plus LTS and Zero3.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20251026133652.1288732-1-cnsztl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ch_ipsec_xfrm_add_state() callback
In ch_ipsec_xfrm_add_state() there is not check of try_module_get
return value. It is very unlikely, but try_module_get() could return
false value, which could cause use-after-free error.
Conditions: The module count must be zero, and a module unload in
progress. The thread doing the unload is blocked somewhere.
Another thread makes a callback into the module for some request
that (for instance) would need to create a kernel thread.
It tries to get a reference for the thread.
So try_module_get(THIS_MODULE) is the right call - and will fail here.
This fix adds checking the result of try_module_get call
Fixes: 6dad4e8ab3ec ("chcr: Add support for Inline IPSec")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251024161304.724436-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8224 can detect open pairs and short types (in same pair or some
other pair). The distance to this problem can be estimated. This is done
for each of the 4 pairs separately.
It is not meant to be run while there is an active link partner because
this interferes with the active test pulses.
Output with open 50 m cable:
Pair A code Open Circuit, source: TDR
Pair A, fault length: 51.79m, source: TDR
Pair B code Open Circuit, source: TDR
Pair B, fault length: 51.28m, source: TDR
Pair C code Open Circuit, source: TDR
Pair C, fault length: 50.46m, source: TDR
Pair D code Open Circuit, source: TDR
Pair D, fault length: 51.12m, source: TDR
Terminated cable:
Pair A code OK, source: TDR
Pair B code OK, source: TDR
Pair C code OK, source: TDR
Pair D code OK, source: TDR
Shorted cable (both short types are at roughly the same distance)
Pair A code Short to another pair, source: TDR
Pair A, fault length: 2.35m, source: TDR
Pair B code Short to another pair, source: TDR
Pair B, fault length: 2.15m, source: TDR
Pair C code OK, source: TDR
Pair D code Short within Pair, source: TDR
Pair D, fault length: 1.94m, source: TDR
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251024-rtl8224-cable-test-v1-1-e3cda89ac98f@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: postpone service task disabling
Przemek Kitszel says:
Move service task shutdown to the very end of driver teardown procedure.
This is needed (or at least beneficial) for all unwinding functions that
talk to FW/HW via Admin Queue (so, most of top-level functions, like
ice_deinit_hw()).
Most of the patches move stuff around (I believe it makes it much easier
to review/proof when kept separate) in preparation to defer stopping the
service task to the very end of ice_remove() (and other unwinding flows).
Then last patch fixes duplicate call to ice_init_hw() (actual, but
unlikely to encounter, so -next, given the size of the changes).
First patch is not much related, only by that it was developed together
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove duplicate call to ice_deinit_hw() on error paths
ice: move ice_deinit_dev() to the end of deinit paths
ice: extract ice_init_dev() from ice_init()
ice: move ice_init_pf() out of ice_init_dev()
ice: move udp_tunnel_nic and misc IRQ setup into ice_init_pf()
ice: ice_init_pf: destroy mutexes and xarrays on memory alloc failure
ice: move ice_init_interrupt_scheme() prior ice_init_pf()
ice: move service task start out of ice_init_pf()
ice: enforce RTNL assumption of queue NAPI manipulation
====================
Link: https://patch.msgid.link/20251024204746.3092277-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the requested PTP feature is not supported,
ixgbe_ptp_feature_enable() returns -ENOTSUPP, causing userland programs
to get "Unknown error 524".
Since EOPNOTSUPP should be used when error is propagated to userland,
return -EOPNOTSUPP instead of -ENOTSUPP.
Fixes: 3a6a4edaa592 ("ixgbe: Hardware Timestamping + PTP Hardware Clock (PHC)")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
igc_ethtool_get_sset_count() returns -ENOTSUPP when a given stringset is
not supported, causing userland programs to get "Unknown error 524".
Since EOPNOTSUPP should be used when error is propagated to userland,
return -EOPNOTSUPP instead of -ENOTSUPP.
Fixes: 36b9fea60961 ("igc: Add support for statistics")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
igb_get_sset_count() returns -ENOTSUPP when a given stringset is not
supported, causing userland programs to get "Unknown error 524".
Since EOPNOTSUPP should be used when error is propagated to userland,
return -EOPNOTSUPP instead of -ENOTSUPP.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current implementation of the igc driver doesn't power up the PHY
before the link test in igc_ethtool_diag_test(), causing the link test
to always report FAIL when admin state is down and the PHY is
consequently powered down.
To test the link state regardless of admin state, power up the PHY
before the link test in the offline test path. After the link test, the
original PHY state is restored by igc_reset(), so additional code which
explicitly restores the original state is not necessary.
Note that this change is applied only for the offline test path. This is
because in the online path we shouldn't interrupt normal networking
operation and powering up the PHY and restoring the original state would
interrupt that.
This implementation also uses igc_power_up_phy_copper() without checking
the media type, since igc devices are currently only copper devices and
the function is called in other places without checking the media type.
Furthermore, the powering up is on a best-effort basis, that is, we
don't handle failures of powering up (e.g. bus error) and just let the
test report FAIL.
Tested on Intel Corporation Ethernet Controller I226-V (rev 04) with
cable connected and link available.
Set device down and do ethtool test.
# ip link set dev enp0s5 down
Without patch:
# ethtool --test enp0s5
The test result is FAIL
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 1
With patch:
# ethtool --test enp0s5
The test result is PASS
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 0
Fixes: f026d8ca2904 ("igc: add support to eeprom, registers and link self-tests")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The error path of ixgbe_recovery_probe() has two memory bugs.
For non-E610 adapters, the function jumps to clean_up_probe without
calling devlink_free(), leaking the devlink instance and its embedded
adapter structure.
For E610 adapters, devlink_free() is called at shutdown_aci, but
clean_up_probe then accesses adapter->state, sometimes triggering
use-after-free because adapter is embedded in devlink. This UAF is
similar to the one recently reported in ixgbe_remove(). (Link)
Fix both issues by moving devlink_free() after adapter->state access,
aligning with the cleanup order in ixgbe_probe().
Link: https://lore.kernel.org/intel-wired-lan/20250828020558.1450422-1-den@valinux.co.jp/
Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In some devices, the function numbers used are non-contiguous. For
example, here is such configuration for E825 device:
root@/home/root# lspci -v | grep Eth
0a:00.0 Ethernet controller: Intel Corporation Ethernet Connection
E825-C for backplane (rev 04)
0a:00.1 Ethernet controller: Intel Corporation Ethernet Connection
E825-C for backplane (rev 04)
0a:00.4 Ethernet controller: Intel Corporation Ethernet Connection
E825-C 10GbE (rev 04)
0a:00.5 Ethernet controller: Intel Corporation Ethernet Connection
E825-C 10GbE (rev 04)
When distributing RSS and FDIR masks, which are global resources across
the active devices, it is required to have a contiguous PF id, which can
be described as a logical PF id. In the case above, function 0 would
have a logical PF id of 0, function 1 would have a logical PF id
of 1, and functions 4 and 5 would have a logical PF ids 2 and 3
respectively.
Using logical PF id can properly describe which slice of resources can
be used by a particular PF.
The 'function id' to 'logical id' mapping has been introduced with the
commit 015307754a19 ("ice: Support VF queue rate limit and quanta size
configuration"). However, the usage of 'logical_pf_id' field was
unintentionally skipped for profile mask configuration.
Fix it by using 'logical_pf_id' instead of 'pf_id' value when configuring
masks.
Without that patch, wrong indexes, i.e. out of range for given PF, can
be used while configuring resources masks, which might lead to memory
corruption and undefined driver behavior.
The call trace below is one of the examples of such error:
[ +0.000008] WARNING: CPU: 39 PID: 3830 at drivers/base/devres.c:1095
devm_kfree+0x70/0xa0
[ +0.000002] RIP: 0010:devm_kfree+0x70/0xa0
[ +0.000001] Call Trace:
[ +0.000002] <TASK>
[ +0.000002] ice_free_hw_tbls+0x183/0x710 [ice]
[ +0.000106] ice_deinit_hw+0x67/0x90 [ice]
[ +0.000091] ice_deinit+0x20d/0x2f0 [ice]
[ +0.000076] ice_remove+0x1fa/0x6a0 [ice]
[ +0.000075] pci_device_remove+0xa7/0x1d0
[ +0.000010] device_release_driver_internal+0x365/0x530
[ +0.000006] driver_detach+0xbb/0x170
[ +0.000003] bus_remove_driver+0x117/0x290
[ +0.000007] pci_unregister_driver+0x26/0x250
Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration")
Suggested-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On dual complex E825, only complex 0 has functional CGU (Clock
Generation Unit), powering all the PHYs.
SBQ (Side Band Queue) destination device 'cgu' in current implementation
points to CGU on current complex and, in order to access primary CGU
from the secondary complex, the driver should use 'cgu_peer' as
a destination device in read/write CGU registers operations.
Define new 'cgu_peer' (15) as RDA (Remote Device Access) client over
SB-IOSF interface and use it as device target when accessing CGU from
secondary complex.
This problem has been identified when working on recovery clock
enablement [1]. In existing implementation for E825 devices, only PF0,
which is clock owner, is involved in CGU configuration, thus the
problem was not exposed to the user.
[1] https://lore.kernel.org/intel-wired-lan/20250905150947.871566-1-grzegorz.nitka@intel.com/
Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E82X adapters do not have sequential IDs, lane number is PF ID.
Add check for ICE_MAC_GENERIC and skip checking port options.
Also, adjust logical port number for specific E825 device with external
PHY support (PCI device id 0x579F). For this particular device,
with 2x25G (PHY0) and 2x10G (PHY1) port configuration, modification of
pf_id -> lane_number mapping is required. PF IDs on the 2nd PHY start
from 4 in such scenario. Otherwise, the lane number cannot be
determined correctly, leading to PTP init errors during PF initialization.
Fixes: 258f5f9058159 ("ice: Add correct PHY lane assignment")
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The DWMAC1000 supports 2 timestamping configurations to configure how
frequency adjustments are made to the ptp_clock, as well as the reported
timestamp values.
There was a previous attempt at upstreaming support for configuring this
mode by Olivier Dautricourt and Julien Beraud a few years back [1]
In a nutshell, the timestamping can be either set in fine mode or in
coarse mode.
In fine mode, which is the default, we use the overflow of an accumulator to
trigger frequency adjustments, but by doing so we lose precision on the
timetamps that are produced by the timestamping unit. The main drawback
is that the sub-second increment value, used to generate timestamps, can't be
set to lower than (2 / ptp_clock_freq).
The "fine" qualification comes from the frequent frequency adjustments we are
able to do, which is perfect for a PTP follower usecase.
In Coarse mode, we don't do frequency adjustments based on an
accumulator overflow. We can therefore have very fine subsecond
increment values, allowing for better timestamping precision. However
this mode works best when the ptp clock frequency is adjusted based on
an external signal, such as a PPS input produced by a GPS clock. This
mode is therefore perfect for a Grand-master usecase.
Introduce a driver-specific devlink parameter "ts_coarse" to enable or
disable coarse mode, keeping the "fine" mode as a default.
This can then be changed with:
devlink dev param set <dev> name ts_coarse value true cmode runtime
The associated documentation is also added.
[1] : https://lore.kernel.org/netdev/20200514102808.31163-1-olivier.dautricourt@orolia.com/
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251024070720.71174-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for fine/coarse support, let's move the subsecond increment
and addend configuration in a dedicated helper.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251024070720.71174-2-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the two GEM instances inside Mobileye EyeQ5 SoCs, using
compatible "mobileye,eyeq5-gem". With it, add a custom init sequence
that must grab a generic PHY and initialise it.
We use bp->phy in both RGMII and SGMII cases. Tell our mode by adding a
phy_set_mode_ext() during macb_open(), before phy_power_on(). We are
the first users of bp->phy that use it in non-SGMII cases.
The phy_set_mode_ext() call is made unconditionally. It cannot cause
issues on platforms where !bp->phy or !bp->phy->ops->set_mode as, in
those cases, the call is a no-op (returning zero). From reading
upstream DTS, we can figure out that no platform has a bp->phy and a
PHY driver that has a .set_mode() implementation:
- cdns,zynqmp-gem: no DTS upstream.
- microchip,mpfs-macb: microchip/mpfs.dtsi, &mac0..1, no PHY attached.
- xlnx,versal-gem: xilinx/versal-net.dtsi, &gem0..1, no PHY attached.
- xlnx,zynqmp-gem: xilinx/zynqmp.dtsi, &gem0..3, PHY attached to
drivers/phy/xilinx/phy-zynqmp.c which has no .set_mode().
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251023-macb-eyeq5-v3-5-af509422c204@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bp->sgmii_phy field is initialised at probe by init_reset_optional()
if bp->phy_interface == PHY_INTERFACE_MODE_SGMII. It gets used by:
- zynqmp_config: "cdns,zynqmp-gem" or "xlnx,zynqmp-gem" compatibles.
- mpfs_config: "microchip,mpfs-macb" compatible.
- versal_config: "xlnx,versal-gem" compatible.
Make name more generic as EyeQ5 requires the PHY in SGMII & RGMII cases.
Drop "for ZynqMP SGMII mode" comment that is already a lie, as it gets
used on Microchip platforms as well. And soon it won't be SGMII-only.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251023-macb-eyeq5-v3-4-af509422c204@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
LSO is runtime-detected using the PBUF_LSO field inside register DCFG6.
Allow disabling that feature if it is broken by using bp->caps coming
from match data.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251023-macb-eyeq5-v3-3-af509422c204@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If HW is RSC capable, it cannot add dummy bytes at the start of IP
packets. Alignment (ie number of dummy bytes) is configured using the
RBOF field inside the NCFGR register.
On the software side, the skb_reserve(skb, NET_IP_ALIGN) call must only
be done if those dummy bytes are added by the hardware; notice the
skb_reserve() is done AFTER writing the address to the device.
We cannot do the skb_reserve() call BEFORE writing the address because
the address field ignores the low 2/3 bits. Conclusion: in some cases,
we risk not being able to respect the NET_IP_ALIGN value (which is
picked based on unaligned CPU access performance).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251023-macb-eyeq5-v3-2-af509422c204@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing NULL pointer check after kzalloc() in
iwl_mld_send_proto_offload(). Without this check, a failed
allocation could lead to a NULL dereference.
Fixes: d1e879ec600f9 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251017041128.1379715-1-liqiang01@kylinos.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Coverity complained that we didn't add a NULL check for the link we
allocate.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.d1f958160c5a.Icc891c14c633c3b8625372680fdc67ca33c83cc7@changeid
|
|
There are going to be some devices called BN203 instead of
BN201, adjust the names accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.2ad0f42ffb57.I2c7864d33f0d7d3dc49381949571c4ce620a9723@changeid
|
|
Modify EMLSR debug prints to use IWL_DL_EHT instead
of IWL_DL_INFO. This will allow better communication
with validation as they might enable only IWL_DL_EHT
or IWL_DL_INFO as required.
Add prints to log attempt to switch links when
missed beacons exceed threshold.
Print both link ids and missed beacons when in EMLSR
mode.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.3bfc2bc8f410.I405ab2aa81af1ba0ea5eaff343eae1778f2035d9@changeid
|
|
We have a few devices that don't allow EHT. Make sure we reflect this
towards mac80211 so that we won't try to enable it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.71121f4e5557.I49e2329d4121f9e52d0889156d0c3e8778e27d88@changeid
|
|
Start supporting Core 101 FW on these devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.23300d52cd8b.I6aad50aed469d7734c165086796dfa9cdf9d81bd@changeid
|
|
If the firmware sends a ROC notification after the driver
cancelled it, we can get into this WARN_ON(). Don't do that,
use IWL_FW_CHECK() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.48aff2c8922e.Ie27b21eb26b67c8010d13ce9590751cad417d1ad@changeid
|
|
Non-HT frames can only be encoded in 20 MHz, however, they
could be duplicated on all/some of the subchannels (mostly
used for RTS/CTS), in which case the firmware will report
and estimate of the overall used bandwidth based on energy
detected. This could be confusing so don't report it that
way, always use 20 MHz for non-HT/legacy frames instead.
Note that currently the value doesn't appear to be used by
mac80211, it never checks the bandwidth field for legacy
encodings.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.23e6695039ca.I3da7c542bde6de4362755f200248dbcc12aa246e@changeid
|
|
Start supporting Core 100 FW on those devices.
In addition, the move to the new Core scheme (instead of API scheme)
will start Core 100 and not 99, as planned. Adjust for that as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.00c28b4259da.Idd6281cd647f1b33f2572a8c107c3a3228e03665@changeid
|
|
When neither mvm nor mld are configured, we don't have the
iwl_bz_mac_cfg symbol and thus cannot check for it. But in
that case the relevant device entries aren't and cannot be
present, so just ifdef the test code for that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509170625.BAJBe7Bi-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.615810979e7b.I9a215f955bb3208d99239be8496d19e0f186b4d0@changeid
|
|
Validate iwl_probe_resp_data_notif::noa_attr::len_low since we are using
its value to determine the noa_len, which is later used for the NoA
attribute.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.b127a2b57e8c.I7ccaf118d236fb39da5da351b95ad9b37b825bc2@changeid
|
|
It is not very clear what values we put in min_umac_error_event_table.
For Ma (Meteor Lake), this value is wrong and we get the print:
Not valid error log pointer ...
Just remove the check.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.a64d0803150f.Ie2db385f68e17fb0adcdcb16e5bf0125289e177d@changeid
|
|
All wifi7 devices need CONFIG_IWLMLD to be enabled.
If we can't support the wifi7 device and the module is not enabled,
complain to the user.
The check in iwl_req_fw_callback is then no longer required.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.071dae9a5de2.I1603085bac5a796442faa75982f8675647becfec@changeid
|
|
We only need versions 1, 6, 8 and 12.
Remove versions 2, 3, 4, 5, 7, 9, 10, 11.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.5c3de58594e8.I6e6f8707eb66a2b540fb19303c06393f13e1f68e@changeid
|
|
This is useful for debugging and can also be used to see
anything that isn't encoded in radiotap (yet.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.5fe26e9061f2.Iefb45e3a6a2a62ff3247db4de3777059d390af95@changeid
|
|
This will break current sniffer functionality for firmware
versions that don't have the new API, but supporting both
would be very complex. Convert the code to use only the new
sniffer notification.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.85b75a084a2f.I4a18b2043703c1f9a8f55c108dcaaeca7891e19c@changeid
|
|
Instead of having a static const array for each possible combination of
features, build the extended capabilities dynamically.
With this we will also stop setting EHT capabilities when it might
actually be disabled.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.b3c03b56d5a3.I38eaf8ebaf3256e78b4643bef7e3a54aeb4989df@changeid
|
|
This allows to set the antennas from user space.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.5a45baf9513c.I5912e6b6d9a9ae6530d0ac45e9517d07f98b8d05@changeid
|
|
The iwlmvm op mode is used for pre EHT HWs. Those HWs doesn't have wider
OFDMA, so phy command versions 5+ (that added support for wider OFDMA)
are not supported. Remove support for them.
This means that we also don't need to set the
IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW, as we don't care about the ap
chandef anyway.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.e7e26fe71132.I8ec95ff86521661118782ecee1be20ef6e8e48e1@changeid
|
