| Age | Commit message (Collapse) | Author |
|---|
|
Since commit eaacfeaca7ad ("can: m_can: Call the RAM init directly from
m_can_chip_config") m_can_init_ram() is not used outside of m_can.c.
Mark as static and remove the EXPORT_SYMBOL_GPL().
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-1-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
TI AM62x SoC requires a wakeup flag being set in pinctrl when mcan pins
act as a wakeup source. Add support to select the wakeup state if WOL
is enabled.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-4-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We have more detailed error values available, return them in the core
driver and the calling drivers to return proper errors to callers.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-3-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In some devices the pins of the m_can module can act as a wakeup source.
This patch helps do that by connecting the PHY_WAKE WoL option to
device_set_wakeup_enable. By marking this device as being wakeup
enabled, this setting can be used by platform code to decide which
sleep or poweroff mode to use.
Also this prepares the driver for the next patch in which the pinctrl
settings are changed depending on the desired wakeup source.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-2-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_change_mtu() became obsolete by commit 23049938605b ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch has been split from the original series [1].
In some SoCs (observed on the STM32MP15) the M_CAN IP core keeps the CAN
state and CAN error counters over an internal reset cycle. The STM32MP15
SoC provides an external reset, which is shared between both M_CAN cores.
Add support for an optional external reset. Take care of shared resets,
de-assert reset during the probe phase in m_can_class_register() and while
the interface is up, assert the reset otherwise.
[1] https://lore.kernel.org/all/20250923-m_can-fix-state-handling-v3-0-06d8baccadbf@pengutronix.de
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20251008-m_can-add-reset-v1-1-49f0bbf820c4@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On all platforms set_clock_selection() writes to a GRF register. This
requires certain clocks running and thus should happen before the
clocks are disabled.
This has been noticed on RK3576 Sige5, which hangs during system suspend
when trying to suspend the second network interface. Note, that
suspending the first interface works, because the second device ensures
that the necessary clocks for the GRF are enabled.
Cc: stable@vger.kernel.org
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251014-rockchip-network-clock-fix-v1-1-c257b4afdf75@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort #include preprocessor directives.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-15-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The arguments grew over time; follow conventions and apply reverse
christmas tree (RCT).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-14-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Local variable `count` is useless: it counts number of DMA descriptors
used and returns it. But the return value is only checked for error.
Drop counting the number of DMA descriptors and return a usual
negative-if-error integer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-13-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pattern:
entry = macb_tx_ring_wrap(bp, i);
tx_skb = &queue->tx_skb[entry];
is the exact definition of:
macb_tx_skb(queue, i);
The pattern:
entry = macb_tx_ring_wrap(bp, i);
desc = macb_tx_desc(queue, entry);
is redundant because macb_tx_desc() calls macb_tx_ring_wrap().
One explicit call to macb_tx_ring_wrap() is still required for checking
if it is the last buffer (TX_WRAP case).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-12-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever min(a, b) is used with a and b unsigned variables or literals,
`make W=2` complains. Change four min() calls into umin().
stderr extract (GCC 11.2.0, MIPS Codescape):
./include/linux/minmax.h:68:57: warning: comparison is always true due
to limited range of data type [-Wtype-limits]
68 | #define __is_nonneg(ux) statically_true((long long)(ux) >= 0)
| ^~
drivers/net/ethernet/cadence/macb_main.c:2299:26: note: in expansion of
macro ‘min’
2299 | hdrlen = min(skb_headlen(skb), bp->max_tx_length);
| ^~~
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-11-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The low 16 bits of GEM_DCFG6 tell us which queues are enabled in HW. In
theory, there could be holes in the bitfield. In practice, the macb
driver would fail if there were holes as most loops iterate upon
bp->num_queues. Only macb_init() iterated correctly.
- Drop bp->queue_mask field.
- Error out at probe if a hole is in the queue mask.
- Rely upon bp->num_queues for iteration.
- As we drop the queue_mask probe local variable, fix RCT.
- Compute queue_mask on the fly for TAPRIO using bp->num_queues.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-10-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce macb_dma64() and macb_dma_ptp() helper functions.
Many codepaths are made simpler by dropping conditional compilation.
This implies two additional changes:
- Always compile related structure definitions inside <macb.h>.
- MACB_EXT_DESC can be dropped as it is useless now.
The common case:
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
struct macb_dma_desc_64 *desc_64;
if (bp->hw_dma_cap & HW_DMA_CAP_64B) {
desc_64 = macb_64b_desc(bp, desc);
// ...
}
#endif
Is replaced by:
if (macb_dma64(bp)) {
struct macb_dma_desc_64 *desc_64 = macb_64b_desc(bp, desc);
// ...
}
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-9-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop bp->hw_dma_cap field and put its two flags into bp->caps.
On my specific config (eyeq5_defconfig), bloat-o-meter indicates:
- macb_main.o: Before=56251, After=56359, chg +0.19%
- macb_ptp.o: Before= 3976, After= 3952, chg -0.60%
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-8-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function body uses a switch statement on bp->hw_dma_cap and handles
its four possible values: 0, is_64b, is_ptp, is_64b && is_ptp.
Instead, refactor by noticing that the return value is:
desc_size * MULT
with MULT = 3 if is_64b && is_ptp,
2 if is_64b || is_ptp,
1 otherwise.
MULT can be expressed as:
1 + is_64b + is_ptp
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-7-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
macb_dma_desc_get_size() does a switch on bp->hw_dma_cap and covers all
four cases: 0, 64B, PTP, 64B+PTP. It also covers the #ifndef
MACB_EXT_DESC separately, making it four codepaths.
Instead, notice the descriptor size grows with enabled features and use
plain if-statements on 64B and PTP flags.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-6-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove NULL checks on macb_config as it is always valid:
- either it is its default value &default_gem_config,
- or it got overridden using match data.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-5-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove local variables clk_init and init. Those function pointers are
always equivalent to macb_config->clk_init and macb_config->init.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-4-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACB_CAPS_* are bit constants that get used in bp->caps. They occupy
bits 0..12 + 24..31. Remove 11..23 gap by moving bits 24..31 to 13..20.
Occupation bitfields:
31 29 27 25 23 21 19 17 15 13 11 09 07 05 03 01
30 28 26 24 22 20 18 16 14 12 10 08 06 04 02 00
-- Before ------------------------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0
-- After -------------------------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-3-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace all capabilities values by calls to the BIT() macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-2-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Ethernet controller support for Eswin's eic7700 SoC. The driver
implements hardware initialization, clock configuration, delay
adjustment functions based on DWC Ethernet controller, and supports
device tree configuration and platform driver integration.
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Signed-off-by: Shangjuan Wei <weishangjuan@eswincomputing.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251015114101.1218-1-weishangjuan@eswincomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_phy_setup() does not set up any PHY, but does setup phylink.
Rename this function to stmmac_phylink_setup() to reflect more what
it is doing.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945d-0000000Ameh-3Bs7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make future changes easier, rearrange the use of dma_cap->l3l4fnum
vs priv->flow_entries_max.
Always initialise priv->flow_entries_max from dma_cap->l3l4fnum, then
use priv->flow_entries_max to determine whether we allocate
priv->flow_entries and set it up.
This change is safe because tc_init() is only called once from
stmmac_dvr_probe().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1v945Y-0000000Ameb-2gDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no need to do the speed-down, speed-up dance when changing
the MTU as there is little power saving that can be gained from such
a brief interval between these, and the autonegotiation they cause
takes much longer.
Move the calls to phylink_speed_up() and phylink_speed_down() into
stmmac_open() and stmmac_release() respectively, reducing the work
done in the __-variants of these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945T-0000000AmeV-2BvU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Place the .mac_finish() initialiser and implementation after the
.mac_config() initialiser and method which reflects the order that
they appear in struct phylink_mac_ops, and the order in which they
are called. This keeps logically similar code together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945O-0000000AmeP-1k0t@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than dwc-qos-eth manipulating the MDIO bus lock directly, add
helpers to the stmmac MDIO layer and use them in dwc-qos-eth. This
improves my commit 87f43e6f06a2 ("net: stmmac: dwc-qos: calibrate tegra
with mdio bus idle").
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945J-0000000AmeJ-1GOb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In cgx_probe() when pci_alloc_irq_vectors() fails the error value will
be negative and that check is sufficient.
err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSIX);
if (err < 0 || err != nvec) {
...
}
When pci_alloc_irq_vectors() fail to allocate nvec number of vectors,
-ENOSPC is returned, so it would be safe to remove the check that
compares err with nvec.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251015090117.1557870-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, netdevsim only sets dev->features, which makes the ESP features
fixed. For example:
# ethtool -k eni0np1 | grep esp
tx-esp-segmentation: on [fixed]
esp-hw-offload: on [fixed]
esp-tx-csum-hw-offload: on [fixed]
This patch adds the ESP features to hw_features, allowing them to be
changed manually. For example:
# ethtool -k eni0np1 | grep esp
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251015083649.54744-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'accel' parameter of mlx5e_txwqe_build_eseg_csum() and the similar
'state' parameter of mlx5e_accel_tx_ids_len() were NULL when called
from mlx5i_sq_xmit() and were causing kernel panics from that context.
Fix that by passing in a local empty mlx5e_accel_tx_state variable, thus
guaranteeing that 'accel' is never NULL. Also remove an unnecessary
check from mlx5e_tx_wqe_inline_mode().
Fixes: e5a1861a298e ("net/mlx5e: Implement PSP Tx data path")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1760511923-890650-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MDIO read callback xgbe_phy_mii_read_c45() can propagate its return
value up through phylink_mii_ioctl() to user space via netdev ioctls such
as SIOCGMIIREG. Returning ENOTSUPP results in user space seeing
"Unknown error", since ENOTSUPP is not a standard errno value.
Replace ENOTSUPP with EOPNOTSUPP to align with the MDIO core’s
usage and ensure user space receives a proper "Operation not supported"
error instead of an unknown code.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251015025751.1532149-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building with Clang 20 or newer, there are some objtool warnings
from unexpected fallthroughs to other functions:
vmlinux.o: warning: objtool: mlx5e_mpwrq_mtts_per_wqe() falls through to next function mlx5e_mpwrq_max_num_entries()
vmlinux.o: warning: objtool: mlx5e_mpwrq_max_log_rq_size() falls through to next function mlx5e_get_linear_rq_headroom()
LLVM 20 contains an (admittedly problematic [1]) optimization [2] to
convert divide by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior and destroys code generation when it is
encountered in a control flow graph.
mlx5e_mpwrq_umr_entry_size() returns 0 in the default case of an
unrecognized mlx5e_mpwrq_umr_mode value. mlx5e_mpwrq_mtts_per_wqe(),
which is inlined into mlx5e_mpwrq_max_log_rq_size(), uses the result of
mlx5e_mpwrq_umr_entry_size() in a divide operation without checking for
zero, so LLVM is able to infer there will be a divide by zero in this
case and invokes undefined behavior. While there is some proposed work
to isolate this undefined behavior and avoid the destructive code
generation that results in these objtool warnings, code should still be
defensive against divide by zero.
As the WARN_ONCE() implies that an invalid value should be handled
gracefully, return 1 instead of 0 in the default case so that the
results of this division operation is always valid.
Fixes: 168723c1f8d6 ("net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters")
Link: https://lore.kernel.org/CAGG=3QUk8-Ak7YKnRziO4=0z=1C_7+4jF+6ZeDQ9yF+kuTOHOQ@mail.gmail.com/ [1]
Link: https://github.com/llvm/llvm-project/commit/37932643abab699e8bb1def08b7eb4eae7ff1448 [2]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2131
Closes: https://github.com/ClangBuiltLinux/linux/issues/2132
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20251014-mlx5e-avoid-zero-div-from-mlx5e_mpwrq_umr_entry_size-v1-1-dc186b8819ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TX frames aren't padded and unknown memory is sent into the ether.
Theoretically, it isn't even guaranteed that the extra memory exists
and can be sent out, which could cause further problems. In practice,
I found that plenty of tailroom exists in the skb itself (in my test
with ping at least) and skb_padto() easily succeeds, so use it here.
In the event of -ENOMEM drop the frame like other drivers do.
The use of one more padding byte instead of a USB zero-length packet
is retained to avoid regression. I have a dodgy Etron xHCI controller
which doesn't seem to support sending ZLPs at all.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251014203528.3f9783c4.michal.pecio@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function txgbe_get_phy_link() is more appropriately named
txgbe_get_mac_link(), since it reads the link status from the MAC
register.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251014061726.36660-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To adapt to new firmware for AML devices, the driver should send the
"SET_LINK_CMD" to the firmware only once when switching PHY interface
mode, and no longer needs to re-trigger PHY configuration based on the
RX signal interrupt (TXGBE_GPIOBIT_3).
In previous firmware versions, the PHY was configured only after receiving
"SET_LINK_CMD", and might remain incomplete if the RX signal was lost.
To handle this case, the driver used TXGBE_GPIOBIT_3 interrupt to resend
the command. This workaround is no longer necessary with the new firmware.
And the unknown link speed is permitted in the mailbox buffer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251014061726.36660-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Recent firmware updates introduce additional fields in the mailbox message
to provide more information for identifying 40G and 100G QSFP modules.
To accommodate these new fields, expand the mailbox buffer size by 4 bytes.
Without this change, drivers built against the updated firmware cannot
properly identify modules due to mismatched mailbox message lengths.
The old firmware version that used the smaller mailbox buffer has never
been publicly released, so there are no backward-compatibility concerns.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251014061726.36660-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This enables aarch64 testing, but there's no reason we cannot support other
architectures.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-3-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The HW always works on a 4K page size. When the OS supports larger
pages, we fragment them across multiple BDQ descriptors.
We were not properly incrementing the descriptor, which resulted in us
specifying the last chunks id/addr and then 15 zero descriptors. This
would cause packet loss and driver crashes. This is not a fix since the
Kconfig prevents use outside of x86.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lan78xx_reset
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id")
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Link: https://patch.msgid.link/20251014122140.990472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support for Airoha 7583 SoC NPU selecting proper firmware images.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-airoha-npu-7583-v3-3-00f748b5a0c7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce airoha_npu_soc_data structure in order to generalize per-SoC
NPU firmware info. Introduce airoha_npu_load_firmware utility routine.
This is a preliminary patch in order to introduce AN7583 NPU support.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-airoha-npu-7583-v3-2-00f748b5a0c7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Detect when PSE hardware is already configured (user byte == 42) and
skip hardware initialization to prevent power interruption to connected
devices during system reboots.
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-3-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cache the port matrix configuration in driver private data to enable
PSE controller reconfiguration. This refactoring separates device tree
parsing from hardware configuration application, allowing settings to be
reapplied without reparsing the device tree.
This refactoring is a prerequisite for preserving PSE configuration
across reboots to prevent power disruption to connected devices.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-2-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace __free(kfree) with explicit kfree() calls to follow the net
subsystem policy of avoiding automatic cleanup macros as described in
the documentation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-1-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If available, interrogate the PHY to find out whether we can use it for
Wake-on-LAN. This can be a more power efficient way of implementing that
feature, especially when the MAC is powered off in low power states.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251013172306.2250223-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bringing a linked netdevsim device down and then up causes communication
failure because both interfaces lack carrier. Basically a ifdown/ifup on
the interface make the link broken.
Commit 3762ec05a9fbda ("netdevsim: add NAPI support") added supported
for NAPI, calling netif_carrier_off() in nsim_stop(). This patch
re-enables the carrier symmetrically on nsim_open(), in case the device
is linked and the peer is up.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9fbda ("netdevsim: add NAPI support")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251014-netdevsim_fix-v2-1-53b40590dae1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some execution paths that jump to the fiber_setup_done label
could leave the remote_adv and local_adv variables uninitialized
and then use it.
Initialize this variables at the point of definition to avoid this.
Fixes: 85730a631f0c ("tg3: Add SGMII phy support for 5719/5718 serdes")
Co-developed-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20251014164736.5890-1-bigalex934@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the TX and RX MCS rate configurations per peer are
reversed when sent to the firmware. As a result, RX MCS rates
are configured for TX, and vice versa. This commit rectifies
the configuration to match what the firmware expects.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-3-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
