| Age | Commit message (Collapse) | Author |
|---|
|
Refactor RX TID deletion handling by moving the REO command
setup and send sequence into a new helper function:
ath12k_dp_rx_tid_delete_handler().
This improves code readability and modularity, and prepares
the codebase for potential reuse of the REO command logic in
other contexts where RX TID deletion is required.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-3-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Increase DP_REO_CMD_RING_SIZE from 128 to 256 to avoid
queuing failures observed during stress test scenarios.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-2-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
While most of the statistics functions (emac_get_stats64() and such) are
called with softirqs enabled, emac_stats_timer() is, as its name
suggests, also called from a timer, i.e. called in softirq context.
All of these take stats_lock. Therefore, make stats_lock softirq-safe by
changing spin_lock() into spin_lock_bh() for the functions that get
statistics.
Also, instead of directly calling emac_stats_timer() in emac_up() and
emac_resume(), set the timer to trigger instead, so that
emac_stats_timer() is only called from the timer. It will keep using
spin_lock().
This fixes a lockdep warning, and potential deadlock when stats_timer is
triggered in the middle of getting statistics.
Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/a52c0cf5-0444-41aa-b061-a0a1d72b02fe@samsung.com/
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20250919-k1-ethernet-fix-lock-v1-1-c8b700aa4954@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 61f132ca8c46 ("ptp: add helpers to get the phc_index by
of_node or dev") has added two generic interfaces to get the phc_index
of the PTP clock. This eliminates the need for PTP device drivers to
provide custom APIs for consumers to retrieve the phc_index. This has
already been implemented for ENETC v4 and is also applicable to ENETC
v1. Therefore, the global variable enetc_phc_index is removed from the
driver. ENETC v1 now uses the same interface as v4 to get phc_index.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250919084509.1846513-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rcu_read_lock() has been introduced in __ethtool_get_ts_info() since
the commit 4c61d809cf60 ("net: ethtool: Fix suspicious rcu_dereference
usage"). Therefore, the device drivers cannot use any sleeping functions
when implementing the callback of ethtool_ops::get_ts_info(). Currently,
pci_get_slot() is used in enetc_get_ts_info(), but it calls down_read()
which might sleep, so this is a potential issue. Therefore, to fix this
issue, pci_get_domain_bus_and_slot() is used to replace pci_get_slot()
in enetc_get_ts_info().
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/netdev/20250918124823.t3xlzn7w2glzkhnx@skbuf/
Fixes: f5b9a1cde0a2 ("net: enetc: add PTP synchronization support for ENETC v4")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250919084509.1846513-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7c571ac57d9d ("net: ptp: introduce .supported_extts_flags to
ptp_clock_info") modified the PTP core kernel logic to validate the
supported flags for the PTP_EXTTS_REQUEST ioctls, rather than relying on
each individual driver correctly checking its flags.
The bcm_ptp_enable() function implements support for PTP_CLK_REQ_EXTTS, but
does not check the flags, and does not forward the request structure into
bcm_ptp_extts_locked().
When originally converting the bcm-phy-ptp.c code, it was unclear what
edges the hardware actually timestamped. Thus, no flags were initialized in
the .supported_extts_flags field. This results in the kernel automatically
rejecting all userspace requests for the PTP_EXTTS_REQUEST2 ioctl.
This occurs because the PTP_STRICT_FLAGS is always assumed when operating
under PTP_EXTTS_REQUEST2. This has been the case since the flags
introduction by commit 6138e687c7b6 ("ptp: Introduce strict checking of
external time stamp options.").
The bcm-phy-ptp.c logic never properly supported strict flag validation,
as it previously ignored all flags including both PTP_STRICT_FLAGS and the
PTP_FALLING_EDGE and PTP_RISING_EDGE flags.
Reports from users in the field prove that the hardware timestamps the
rising edge. Encode this in the .supported_extts_flags field. This
re-enables support for the PTP_EXTTS_REQUEST2 ioctl.
Reported-by: James Clark <jjc@jclark.com>
Fixes: 7c571ac57d9d ("net: ptp: introduce .supported_extts_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-2-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bcm_ptp_perout_locked() function has support for handling
PTP_PEROUT_DUTY_CYCLE, but its not listed in the supported_perout_flags.
Attempts to use the duty cycle support will be rejected since commit
d9f3e9ecc456 ("net: ptp: introduce .supported_perout_flags to
ptp_clock_info"), as this flag accidentally missed while doing the
conversion.
Drop the unnecessary supported flags check from the bcm_ptp_perout_locked()
function and correctly set the supported_perout_flags. This fixes use of
the PTP_PEROUT_DUTY_CYCLE support for the broadcom driver.
Reported-by: James Clark <jjc@jclark.com>
Fixes: d9f3e9ecc456 ("net: ptp: introduce .supported_perout_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-1-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ping-Ke Shih says:
==================
rtw-next patches for v6.18
Some small fixes and features are listed:
rtw88:
* correct LED function
rtw89:
* fix wait/completion racing of sending NULL data
* implement beacon tracking feature
* implement report channel noise function supported by RTL8852A
* correct RTL8851B RF calibration
* preparation of PCI TX/RX ring and interrupts for coming RTL8922DE
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Lockdep gives a splat [1] when ser_hdl_work item is executed. It is
scheduled at mac80211 workqueue via ieee80211_queue_work() and takes a
wiphy lock inside. However, this workqueue can be flushed when e.g.
closing the interface and wiphy lock is already taken in that case.
Choosing wiphy_work_queue() for SER is likely not suitable. Back on to
the global workqueue.
[1]:
WARNING: possible circular locking dependency detected
6.17.0-rc2 #17 Not tainted
------------------------------------------------------
kworker/u32:1/61 is trying to acquire lock:
ffff88811bc00768 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ser_state_run+0x5e/0x180 [rtw89_core]
but task is already holding lock:
ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}:
process_one_work+0x7c6/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
-> #1 ((wq_completion)phy0){+.+.}-{0:0}:
touch_wq_lockdep_map+0x8e/0x180
__flush_workqueue+0x129/0x10d0
ieee80211_stop_device+0xa8/0x110
ieee80211_do_stop+0x14ce/0x2880
ieee80211_stop+0x13a/0x2c0
__dev_close_many+0x18f/0x510
__dev_change_flags+0x25f/0x670
netif_change_flags+0x7b/0x160
do_setlink.isra.0+0x1640/0x35d0
rtnl_newlink+0xd8c/0x1d30
rtnetlink_rcv_msg+0x700/0xb80
netlink_rcv_skb+0x11d/0x350
netlink_unicast+0x49a/0x7a0
netlink_sendmsg+0x759/0xc20
____sys_sendmsg+0x812/0xa00
___sys_sendmsg+0xf7/0x180
__sys_sendmsg+0x11f/0x1b0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&rdev->wiphy.mtx){+.+.}-{4:4}:
__lock_acquire+0x124c/0x1d20
lock_acquire+0x154/0x2e0
__mutex_lock+0x17b/0x12f0
ser_state_run+0x5e/0x180 [rtw89_core]
rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
process_one_work+0x82d/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&rdev->wiphy.mtx --> (wq_completion)phy0 --> (work_completion)(&ser->ser_hdl_work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&ser->ser_hdl_work));
lock((wq_completion)phy0);
lock((work_completion)(&ser->ser_hdl_work));
lock(&rdev->wiphy.mtx);
*** DEADLOCK ***
2 locks held by kworker/u32:1/61:
#0: ffff888103835148 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0xefa/0x1450
#1: ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450
stack backtrace:
CPU: 0 UID: 0 PID: 61 Comm: kworker/u32:1 Not tainted 6.17.0-rc2 #17 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
Workqueue: phy0 rtw89_ser_hdl_work [rtw89_core]
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_circular_bug.cold+0x178/0x1be
check_noncircular+0x14c/0x170
__lock_acquire+0x124c/0x1d20
lock_acquire+0x154/0x2e0
__mutex_lock+0x17b/0x12f0
ser_state_run+0x5e/0x180 [rtw89_core]
rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
process_one_work+0x82d/0x1450
worker_thread+0x49e/0xd00
kthread+0x313/0x640
ret_from_fork+0x221/0x300
ret_from_fork_asm+0x1a/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org).
Fixes: ebfc9199df05 ("wifi: rtw89: add wiphy_lock() to work that isn't held wiphy_lock() yet")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-5-pchelkin@ispras.ru
|
|
If there is no rtwsta_link found in rtw89_core_send_nullfunc(), allocated
skb is leaked. Free it on the error handling path.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a8ba4acab7db ("wifi: rtw89: send nullfunc based on the given link")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-4-pchelkin@ispras.ru
|
|
The value of skb_data->wait indicates whether skb is passed on to the
core mac80211 stack or released by the driver itself. Make sure that by
the time skb is added to txwd queue and becomes visible to the completing
side, it has already allocated and initialized TX wait related data (in
case it's needed).
This is found by code review and addresses a possible race scenario
described below:
Waiting thread Completing thread
rtw89_core_send_nullfunc()
rtw89_core_tx_write_link()
...
rtw89_pci_txwd_submit()
skb_data->wait = NULL
/* add skb to the queue */
skb_queue_tail(&txwd->queue, skb)
/* another thread (e.g. rtw89_ops_tx) performs TX kick off for the same queue */
rtw89_pci_napi_poll()
...
rtw89_pci_release_txwd_skb()
/* get skb from the queue */
skb_unlink(skb, &txwd->queue)
rtw89_pci_tx_status()
rtw89_core_tx_wait_complete()
/* use incorrect skb_data->wait */
rtw89_core_tx_kick_off_and_wait()
/* assign skb_data->wait but too late */
Found by Linux Verification Center (linuxtesting.org).
Fixes: 1ae5ca615285 ("wifi: rtw89: add function to wait for completion of TX skbs")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-3-pchelkin@ispras.ru
|
|
There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries to
access already freed skb_data:
BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
Use-after-free write at 0x0000000020309d9d (in kfence-#251):
rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache
allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago):
__alloc_skb net/core/skbuff.c:659
__netdev_alloc_skb net/core/skbuff.c:734
ieee80211_nullfunc_get net/mac80211/tx.c:5844
rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago):
ieee80211_tx_status_skb net/mac80211/status.c:1117
rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564
rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651
rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676
rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238
__napi_poll net/core/dev.c:7495
net_rx_action net/core/dev.c:7557 net/core/dev.c:7684
handle_softirqs kernel/softirq.c:580
do_softirq.part.0 kernel/softirq.c:480
__local_bh_enable_ip kernel/softirq.c:407
rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927
irq_thread_fn kernel/irq/manage.c:1133
irq_thread kernel/irq/manage.c:1257
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
It is a consequence of a race between the waiting and the signaling side
of the completion:
Waiting thread Completing thread
rtw89_core_tx_kick_off_and_wait()
rcu_assign_pointer(skb_data->wait, wait)
/* start waiting */
wait_for_completion_timeout()
rtw89_pci_tx_status()
rtw89_core_tx_wait_complete()
rcu_read_lock()
/* signals completion and
* proceeds further
*/
complete(&wait->completion)
rcu_read_unlock()
...
/* frees skb_data */
ieee80211_tx_status_ni()
/* returns (exit status doesn't matter) */
wait_for_completion_timeout()
...
/* accesses the already freed skb_data */
rcu_assign_pointer(skb_data->wait, NULL)
The completing side might proceed and free the underlying skb even before
the waiting side is fully awoken and run to execution. Actually the race
happens regardless of wait_for_completion_timeout() exit status, e.g.
the waiting side may hit a timeout and the concurrent completing side is
still able to free the skb.
Skbs which are sent by rtw89_core_tx_kick_off_and_wait() are owned by the
driver. They don't come from core ieee80211 stack so no need to pass them
to ieee80211_tx_status_ni() on completing side.
Introduce a work function which will act as a garbage collector for
rtw89_tx_wait_info objects and the associated skbs. Thus no potentially
heavy locks are required on the completing side.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 1ae5ca615285 ("wifi: rtw89: add function to wait for completion of TX skbs")
Cc: stable@vger.kernel.org
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-2-pchelkin@ispras.ru
|
|
In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because
rxcb->peer_id is not updated with a valid value. This is expected
in monitor mode, where RX frames bypass the regular RX
descriptor path that typically sets rxcb->peer_id.
As a result, the peer is NULL, and link_id and link_valid fields
in the RX status are not populated. This leads to a WARN_ON in
mac80211 when it receives data frame from an associated station
with invalid link_id.
Fix this potential issue by using ppduinfo->peer_id, which holds
the correct peer id for the received frame. This ensures that the
peer is correctly found and the associated link metadata is updated
accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: bd00cc7e8a4c ("wifi: ath12k: replace the usage of rx desc with rx_info")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250724040552.1170642-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
mac_interface has served little purpose, and has only caused confusion.
Now that we have cleaned up all platform glue drivers which should not
have been using mac_interface, there are no users remaining. Remove
mac_interface.
This results in the special dwmac specific "mac-mode" DT property
becoming redundant, and an in case, no DTS files in the kernel make use
of this property. Add a warning if the property is set, and it is
different from the "phy-mode".
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/E1uytpv-00000006H2x-196h@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-thead supports either MII or RGMII interface modes only.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-thead to use phy_interface when determining the
interface mode rather than mac_interface.
Also convert the error prints to use phy_modes() so that we get a
meaningful string rather than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpq-00000006H2q-0ajY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-sun8i supports MII, RMII and RGMII interface modes only. It
is unclear whether the dwmac core interface is different from the
one presented to the outside world.
However, as none of the DTS files set "mac-mode", mac_interface will
be identical to phy_interface.
Convert dwmac-sun8i to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/E1uytpl-00000006H2k-08pH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-stm32 supports MII, RMII, GMII and RGMII interface modes,
selecting the dwmac core interface mode via bits 23:21 of the
SYSCFG register. The bit combinations are identical to the
dwmac phy_intf_sel_i signals.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-stm32 to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpf-00000006H2c-3hiU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-starfive uses RMII or RGMII interface modes without any PCS,
and selects the dwmac core accordingly using a register field with
the same bit encoding as the core's phy_intf_sel_i signals.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-starfive to use phy_interface when determining the
interface mode rather than mac_interface. Also convert the error
prints to use phy_modes() so that we get a meaningful string rather
than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpa-00000006H2X-3GWx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-socfpga uses MII, RMII, GMII, RGMII, SGMII and 1000BASE-X
interface modes, and supports the Lynx PCS. The Lynx PCS will only be
used for SGMII and 1000BASE-X modes, with the MAC programmed to use
GMII or MII mode to talk to the PCS. This suggests that the Synopsys
optional dwmac PCS is not present.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-socfpga to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpV-00000006H2R-2nA6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac-ingenic uses only MII, RMII, GMII or RGMII interface modes, none
of which require any kind of conversion between the MAC and external
world. Thus, mac_interface and phy_interface will be the same.
Convert dwmac-ingenic to use phy_interface when determining the
interface mode that the dwmac core should be configured to at reset,
rather than mac_interface.
Also convert the error prints to use phy_modes() and terminate with a
newline so that we get a human readable string rather than a number for
the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpQ-00000006H2L-2Jzb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Checking the IMX8MP documentation, there is no requirement for a
separate mac_interface mode definition. As mac_interface and
phy_interface will be the same, use phy_interface internally rather
than mac_interface.
Also convert the error prints to use phy_modes() so that we get a
meaningful string rather than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpL-00000006H2F-1o6b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the majority, if not all cases, mac_interface and phy_interface
are the same with the exception of some drivers that I have suggested
only use phy_interface and set mac_interface to PHY_INTERFACE_MODE_NA.
The only two that currently set mac_interface to PHY_INTERFACE_MODE_NA
are dwmac-loongson and dwmac-lpc18xx, neither of which use RGMII nor
SGMII.
In order to phase out the use of mac_interface, we need to have a path
for existing drivers so they can update to only using phy_interface
without causing regressions.
Therefore, in order to keep the "pcs" code working, we need to choose
the STMMAC integrated PCS mode based on phy_interface if mac_interface
is PHY_INTERFACE_MODE_NA.
This will allow more drivers to set mac_interface to
PHY_INTERFACE_MODE_NA without risking regressions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpG-00000006H29-1Ltk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mlx5_devlink_total_vfs_set function branches based on per_pf_support
twice. Remove the second branch as the first one exits the function when
per_pf_support is false.
Accidentally added as part of commit a4c49611cf4f ("net/mlx5: Implement
devlink total_vfs parameter").
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-rdma/aMQWenzpdjhAX4fm@stanley.mountain/
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/a6142a60-1948-439a-b0ae-ff1df26a37f8@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New cocci check complains:
drivers/net/phy/micrel.c:4308:6-13: WARNING: Consider using %pe to print PTR_ERR()
drivers/net/phy/micrel.c:5742:6-13: WARNING: Consider using %pe to print PTR_ERR()
Link: https://lore.kernel.org/1758192227-701925-1-git-send-email-tariqt@nvidia.com
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250918183119.2396019-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having a slash in the driver name leads to EIO being returned while
reading /sys/module/rvu_af/drivers content.
Remove DRV_STRING as it's not used anywhere.
Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Petr Malat <oss@malat.biz>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250918152106.1798299-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This error handling triggers a Smatch warning:
drivers/net/ethernet/ti/icssm/icssm_prueth.c:1574 icssm_prueth_probe()
warn: 'prueth->pru1' is an error pointer or valid
The warning is harmless because the pru_rproc_put() function has an
IS_ERR_OR_NULL() check built in. However, there is a small bug if
syscon_regmap_lookup_by_phandle() fails. In that case we should call
of_node_put() on eth0_node and eth1_node.
It's a little bit easier to re-write this code to only free things which
we know have been allocated successfully.
Fixes: 511f6c1ae093 ("net: ti: icssm-prueth: Adds ICSSM Ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://patch.msgid.link/aMvVagz8aBRxMvFn@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit introduced two new flow groups to enable L4 RSS
for decrypted IPsec traffic. This commit implements the logic to
populate these groups with the necessary steering rules.
The rules are created dynamically whenever the first IPSec offload
rule is configured via the xfrm subsystem and the decryption tables
for RX are created. Each rule matches a specific decrypted traffic
type based on its ip version (or ethertype) and outer/inner
l4_type_ext, directing it to the appropriate L4 RSS-enabled TIR.
The lifecycle of these steering rules is tied directly to the RX
tables. They are deleted when the RX tables are destroyed.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758179963-649455-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using IPsec crypto offload, the hardware decrypts the packet
payload but preserves the ESP header. This prevents the standard RSS
mechanism from accessing the inner L4 (TCP/UDP) headers. As a result,
the RSS hash is calculated only on the outer L3 IP headers, causing
all traffic for a given IPsec tunnel to be directed to a single queue,
leading to poor traffic distribution.
Newer firmware introduces the ability to match on l4_type_ext, which
exposes the L4 protocol type following an ESP header. This allows the
driver to create steering rules that can identify the inner protocols
of decrypted packets.
This commit leverages this new capability to improve traffic
distribution. It adds two new flow groups to steer decrypted packets
to dedicated TIRs that was configured to perform RSS on the inner L4
headers.
These groups are inserted after the standard L4 group and before the
group that handles undecrypted ESP packets added in this series. The
first new group matches decrypted packets based on the outer IP
version (or ethertype) and l4_type_ext. The second new group matches
decrypted tunneled packets based on the inner IP version and
l4_type_ext. Eight new traffic types are also defined to support this
functionality.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758179963-649455-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the commit 5e466345291a ("net/mlx5e: IPsec: Add IPsec steering in
local NIC RX"), the decrypted packets are handled in RX error flow
table. There is only one rule in the table, which forwards packets to
the default ESP TIR.
This patch updates the design to allow RSS after decryption. For ESP
traffic, SPI and IP addresses are the fields selected for RSS hash,
and it's common that only one SPI is configured in RX direction, so
RSS can't work properly as all the packets are hashed to one key in
this case. To take advantage of RSS and improve performance, the
decrypted packets need to be forwarded back to TTC table, where RSS
can work based on the decrypted packet types.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758179963-649455-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TTC (Traffic Type Classifier) table classifies the traffic and
steers packet to TIRs, where RSS works based on the hash calculated
from the selected packet fields. For AH/ESP packets, SPI and IP
addresses are the fields used to calculate the hash value for RSS. So,
it's hard to distribute packets to different receiving queues as there
is usually only one SPI in that direction.
IPSec hardware offloads, crypto offload and full (packet) offload were
introduced later. For crypto offload, hardware does encryption,
decryption and authentication, kernel does the others. Kernel always
sends/receives formatted ESP packets with plaintext data instead of
the ciphertext data, all other fields are unmodified. For full
offload, hardware will take care of almost everything, kernel just
sends/receives packets without any IPSec headers.
Currently, all packets with ESP protocols are forwarded to IPSec
offload tables if IPSec rules are configured. In a downstream patch,
the decrypted packets will be recirculated to TTC table, in order to
use RSS, which does the hash on L4 fields after IPSec headers are
stripped by full offload. So those packets handled by crypto offload
must filtered out, as they still have the ESP headers, but apparently
no need to be decrypted again. To do that, ipsec_next_header is added
for the packet matching, as it is valid only after passing through
IPSec decryption.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758179963-649455-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The syzbot report a UAF issue:
BUG: KASAN: slab-use-after-free in skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
BUG: KASAN: slab-use-after-free in napi_frags_skb net/core/gro.c:723 [inline]
BUG: KASAN: slab-use-after-free in napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
Read of size 8 at addr ffff88802ef22c18 by task syz.0.17/6079
CPU: 0 UID: 0 PID: 6079 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
napi_frags_skb net/core/gro.c:723 [inline]
napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
tun_get_user+0x28cb/0x3e20 drivers/net/tun.c:1920
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:330 [inline]
__kasan_mempool_unpoison_object+0xa0/0x170 mm/kasan/common.c:558
kasan_mempool_unpoison_object include/linux/kasan.h:388 [inline]
napi_skb_cache_get+0x37b/0x6d0 net/core/skbuff.c:295
__alloc_skb+0x11e/0x2d0 net/core/skbuff.c:657
napi_alloc_skb+0x84/0x7d0 net/core/skbuff.c:811
napi_get_frags+0x69/0x140 net/core/gro.c:673
tun_napi_alloc_frags drivers/net/tun.c:1404 [inline]
tun_get_user+0x77c/0x3e20 drivers/net/tun.c:1784
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x5b/0x80 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2422 [inline]
slab_free mm/slub.c:4695 [inline]
kmem_cache_free+0x18f/0x400 mm/slub.c:4797
skb_pp_cow_data+0xdd8/0x13e0 net/core/skbuff.c:969
netif_skb_check_for_xdp net/core/dev.c:5390 [inline]
netif_receive_generic_xdp net/core/dev.c:5431 [inline]
do_xdp_generic+0x699/0x11a0 net/core/dev.c:5499
tun_get_user+0x2523/0x3e20 drivers/net/tun.c:1872
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
After commit e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in
generic mode"), the original skb may be freed in skb_pp_cow_data() when
XDP program was attached, which was allocated in tun_napi_alloc_frags().
However, the napi->skb still point to the original skb, update it after
XDP process.
Reported-by: syzbot+64e24275ad95a915a313@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=64e24275ad95a915a313
Fixes: e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in generic mode")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250917113919.3991267-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USB stack calls during disconnect the esd_usb_disconnect() callback.
esd_usb_disconnect() calls netdev_unregister() for each network which
in turn calls the net_device_ops::ndo_stop callback esd_usb_close() if
the net device is up.
The esd_usb_close() callback tries to disable all CAN Ids and to reset
the CAN controller of the device sending appropriate control messages.
Sending these messages in .disconnect() is moot and always fails because
either the device is gone or the USB communication is already torn down
by the USB stack in the course of a rmmod operation.
Move the code that sends these control messages to a new function
esd_usb_stop() which is approximately the counterpart of
esd_usb_start() to make code structure less convoluted.
Then change esd_usb_close() not to send the control messages at all if
the ndo_stop() callback is executed from the USB .disconnect()
callback. Add a new flag in_usb_disconnect to the struct esd_usb
device structure to mark this condition which is checked by
esd_usb_close() whether to skip the send operations in esd_usb_start().
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-6-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
- esd_usb_open(): Get rid of duplicate "couldn't start device: %d\n"
message already printed from esd_usb_start().
- Fix duplicate printout of network device name when network device
is registered. Add an unregister message for the network device
as counterpart to the register message.
- Add the printout of error codes together with the error messages
in esd_usb_close() and some in esd_usb_probe(). The additional error
codes should lead to a better understanding what is really going
wrong.
- Convert all occurrences of error status prints to use "ERR_PTR(err)"
instead of printing the decimal value of "err".
- Rename retval to err in esd_usb_read_bulk_callback() to make the
naming of error status variables consistent with all other functions.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-5-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Replace numerical error codes by mnemotechnic error codes, to improve
the user experience in case of errors.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/adb2dc49c78b45191de410f645a5e423d341f94e.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If alloc_candev() failed due to out-of-memory, the core memory
allocation code has already printed an error message.
If alloc_candev() failed for a different reason, alloc_netdev_mqs() has
already printed an error message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/2d6ad4be211a35492570fd7219ca7a89b384bfad.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert CAN Mailbox Register field accesses to use the FIELD_PREP() and
FIELD_GET() bitfield access macro.
This gets rid of explicit shifts, and keeps a clear separation between
hardware register layouts and offical CAN definitions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/c75c7d6ed5929c4becf7c9178cec04a0731e8ab1.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert CAN Bit Configuration Register field accesses to use the
FIELD_PREP() bitfield access macro. While at it, fix the misspelling of
BRP.
This gets rid of custom function-like field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/01cfaedba2be22515ba8700893ea7f113df959c0.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert CAN Transmit FIFO Control Register field accesses to use the
FIELD_GET() bitfield access macro.
This gets rid of an explicit shift.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a8b1dc6f1249a01af9b691ca59e2e5cc2dba6d44.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert CAN Control Register field accesses to use the FIELD_PREP()
bitfield access macro. Add a few more comments and definitions while at
it.
This gets rid of explicit (and sometimes confusing) shifts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/077640e31949dc3c9d128a08ade94c9e9cd25672.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the GENMASK() macro instead of open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/3f947f0f91a8857a2cbce74807e42258e9f209ca.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the BIT() macro instead of open-coding the same operation.
Add a few more comments while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/78fb16beb74975f6f6140ec9abb48beb94fb0afa.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The R-Car CAN module is part of a Clock Domain on all supported SoCs.
Hence convert its driver from explicit clock management to Runtime PM.
While at it, use %pe to format error codes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/68bfa5480a79c17c6ceec4fb073f33872e7ff5d0.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
rcar_can_probe() has many users of "pdev->dev". Introduce a shorthand
to simplify the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/baf34c8bef5625ae73c830dbb3c617eb8f7adddd.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Most net_device pointers are named "ndev", but some are called "dev".
Increase uniformity by always using "ndev".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/aac66fb5b5e1d6787121cf2ec36b551b41d4b32e.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Explicitly uses a 64-bit constant when the number of bits used for its
shifting is 32 (which is the case for PC CAN FD interfaces supported by
this driver).
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250918132413.30071-1-stephane.grosjean@free.fr
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/20250917-aboriginal-refined-honeybee-82b1aa-mkl@pengutronix.de
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
[mkl: update subject, apply manually]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-4-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the etas_es58x driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, es58x_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN(FD)
frame.
This can result in a buffer overflow. For example, using the es581.4
variant, the frame will be dispatched to es581_4_tx_can_msg(), go
through the last check at the beginning of this function:
if (can_is_canfd_skb(skb))
return -EMSGSIZE;
and reach this line:
memcpy(tx_can_msg->data, cf->data, cf->len);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU or
CANFD_MTU (depending on the device capabilities). By fixing the root
cause, this prevents the buffer overflow.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-1-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Driver configures register to choose controller mode before
setting all channels to reset mode leading to failure.
The patch corrects operation of mode setting.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Tranh Ha <tranh.ha.xb@renesas.com>
Link: https://patch.msgid.link/TYWPR01MB87434739F83E27EDCD23DF44B416A@TYWPR01MB8743.jpnprd01.prod.outlook.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
