| Age | Commit message (Collapse) | Author |
|---|
|
Move the stmmac_init_ptp() messages from stmmac_hw_setup() to
stmmac_init_ptp(), which will allow further cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename stmmac_release() to __stmmac_release(), providing a new
stmmac_release() method. Update stmmac_change_mtu() to use
__stmmac_release(). Move the runtime PM handling into stmmac_open()
and stmmac_release().
This avoids stmmac_change_mtu() needlessly fiddling with the runtime
PM state, and will allow future changes to remove code from
__stmmac_open() and __stmmac_release() that should only happen when
the net device is administratively brought up or down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nothing outside of stmmac_main.c makes use of
stmmac_init_tstamp_counter(), so there's no point exporting it for
modules, or even having it non-static. Remove the export and make
it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neither stmmac_xdp_release() nor the normal paths of stmmac_xdp_open()
touch clk_ptp_ref, so stmmac_xdp_open() should not be doing anything
with this clock. However, in its error path, it calls
stmmac_hw_teardown() which disables and unprepares this clock, which
can lead to the clock state becoming unbalanced when the netdev is
taken administratively down.
Remove this call to stmmac_hw_teardown(), and as this is the last user
of this function, remove the function as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cleanup function for stmmac_setup_ptp() is stmmac_release_ptp()
which entirely undoes the effects of stmmac_setup_ptp() by
unregistering the PTP device and then stopping the PTP clock,
whereas stmmac_hw_teardown() will only stop the PTP clock while
leaving the PTP device registered.
This can lead to a kernel oops - if __stmmac_open() fails after
registering the PTP clock, the PTP device will remain registered,
and if the module is removed, subsequent PTP device accesses will
lead to a kernel oops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the principle of unpublish from userspace and then teardown
resources.
Disable the PTP clock only after unregistering with the PTP subsystem,
which ensures that we only stop the clock that ticks the timesource
after we have removed the PTP device.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The aux_ts_lock mutex is only required while the PTP clock has been
successfully registered.
stmmac_ptp_register() does not return any errors (as we don't wish to
prevent the netdev being opened if PTP fails), stmmac_ptp_unregister()
was coded to allow it to be called irrespective of whether PTP was
successfully registered or not.
Arrange for the aux_ts_lock mutex to be destroyed if the PTP clock
is not functional during stmmac_ptp_register(), and only destroy it
in stmmac_ptp_unregister() if we had a PTP clock registered.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6352_config_eventcap() is documented as handling both EXTTS and
PPS capture modes, but nothing ever calls it for PPS capture. Remove
the unused PPS capture mode support, and the now unused
MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG definition.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwep9-00000004ikJ-2FeF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
evcap_config is only read and written in mv88e6352_config_eventcap(),
so it makes little sense to store it in the global chip struct. Make
it a local variable instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwep4-00000004ikD-1ZEh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chip->trig_config is never written, and thus takes the value zero.
Remove this struct member and its single reader.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uweoz-00000004ik7-13Fl@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6250_ptp_ops and mv88e6352_ptp_ops are identical since commit
7e3c18097a70 ("net: dsa: mv88e6xxx: read cycle counter period from
hardware"). Remove the unnecessary duplication.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uweou-00000004ik1-0aiX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If HW Channel (HWC) is not responding, reduce the waiting time, so further
steps will fail quickly.
This will prevent getting stuck for a long time (30 minutes or more), for
example, during unloading while HWC is not responding.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1757537841-5063-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Renesas GBETH stmmac glue driver to support the RZ/T2H SoC,
where the GMAC is connected through a MIIC PCS. Introduce a new
`has_pcs` flag in `struct renesas_gbeth_of_data` to indicate when PCS
handling is required.
When enabled, the driver parses the `pcs-handle` phandle, creates a PCS
instance with `miic_create()`, and wires it into phylink. Proper cleanup
is done with `miic_destroy()`. New init/exit/select hooks are added to
`plat_stmmacenet_data` for PCS integration.
Update Kconfig to select `PCS_RZN1_MIIC` when building the Renesas GBETH
driver so the PCS support is always available.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for adding RZ/T2H SoC support by making the driver configuration
selectable via OF match data. While the RZ/V2H(P) and RZ/T2H use the same
version of the Synopsys DesignWare MAC (version 5.20), the hardware is
synthesized with different options. To accommodate these differences,
introduce a struct holding per-SoC configuration such as clock list,
number of clocks, TX clock rate control, and STMMAC flags, and retrieve
it from the device tree match entry during probe.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce rcar_canfd_compute_data_bit_rate_cfg() for simplifying data bit
rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce rcar_canfd_compute_nominal_bit_rate_cfg() for simplifying
nominal bit rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-4-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Update RCANFD_CFG_* macros to give a meaning to the magic number using
GENMASK macro and extract the values using FIELD_PREP macro.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The calculation formula for nominal bit rate of classical CAN is the same as
that of nominal bit rate of CANFD on the RZ/G3E and R-Car Gen4 SoCs
compared to other SoCs. Update nominal bit rate constants.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250908120940.147196-2-biju.das.jz@bp.renesas.com
[mkl: slightly improve wording of commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With the upcoming deletion of @peak-system.com accounts and following
the acquisition of PEAK-System and its brand by HMS-Networks, this fix
aims to migrate all address references to @hms-networks.com, as well
as to map my personal committer addresses to author addresses, while
taking the opportunity to correct the accent on the first ‘e’ of my
first name.
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250912081820.86314-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Includes are out of order in
drivers/net/can/dev/dev.c
Sort them by alphabetical order.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250830152107.694201-2-mailhol@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The tx_coalesce_usecs_irq are more suitable for using the
us_to_ktime(). This can make the code more concise and
enhance readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250825090904.248927-1-zhao.xichao@vivo.com
[mkl: remove not needed line break]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X,
KSZ9477, LAN8814, LAN8804 and LAN8841.
Support for the VSC8201 was removed in commit 51f932c4870f ("micrel phy
driver - updated(1)")
Update the help text to reflect that, list families instead of models to
ease future maintenance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for hardware timestamps in (e.g.) the PHY by calling
skb_tx_timestamp() as close as reasonably possible to the point that
the hardware is instructed to send the queued packets.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwKHe-00000004glk-3nkJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
wg_cpumask_choose_online()
The function gets number of online CPUS, and uses it to search for
Nth cpu in cpu_online_mask.
If id == num_online_cpus() - 1, and one CPU gets offlined between
calling num_online_cpus() -> cpumask_nth(), there's a chance for
cpumask_nth() to find nothing and return >= nr_cpu_ids.
The caller code in __queue_work() tries to avoid that by checking the
returned CPU against WORK_CPU_UNBOUND, which is NR_CPUS. It's not the
same as '>= nr_cpu_ids'. On a typical Ubuntu desktop, NR_CPUS is 8192,
while nr_cpu_ids is the actual number of possible CPUs, say 8.
The non-existing cpu may later be passed to rcu_dereference() and
corrupt the logic. Fix it by switching from 'if' to 'while'.
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250910013644.4153708-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
wg_cpumask_choose_online() opencodes cpumask_nth(). Use it and make the
function significantly simpler. While there, fix opencoded cpu_online()
too.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250910013644.4153708-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit c50e7475961c ("dpaa2-switch: Fix error checking in
dpaa2_switch_seed_bp()"), the probing of a second DPSW object errors out
like below.
fsl_dpaa2_switch dpsw.1: fsl_mc_driver_probe failed: -12
fsl_dpaa2_switch dpsw.1: probe with driver fsl_dpaa2_switch failed with error -12
The aforementioned commit brought to the surface the fact that seeding
buffers into the buffer pool destined for control traffic is not
successful and an access violation recoverable error can be seen in the
MC firmware log:
[E, qbman_rec_isr:391, QBMAN] QBMAN recoverable event 0x1000000
This happens because the driver incorrectly used the ID of the DPBP
object instead of the hardware buffer pool ID when trying to release
buffers into it.
This is because any DPSW object uses two buffer pools, one managed by
the Linux driver and destined for control traffic packet buffers and the
other one managed by the MC firmware and destined only for offloaded
traffic. And since the buffer pool managed by the MC firmware does not
have an external facing DPBP equivalent, any subsequent DPBP objects
created after the first DPSW will have a DPBP id different to the
underlying hardware buffer ID.
The issue was not caught earlier because these two numbers can be
identical when all DPBP objects are created before the DPSW objects are.
This is the case when the DPL file is used to describe the entire DPAA2
object layout and objects are created at boot time and it's also true
for the first DPSW being created dynamically using ls-addsw.
Fix this by using the buffer pool ID instead of the DPBP id when
releasing buffers into the pool.
Fixes: 2877e4f7e189 ("staging: dpaa2-switch: setup buffer pool and RX path rings")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250910144825.2416019-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ip_tunnel_info` is a flexible
structure, this is a structure that contains a flexible-array
member.
Fix the following warning:
drivers/net/geneve.c:56:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/aMBK78xT2fUnpwE5@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of a having a comment that the lock must be held when calling
the internal helper add a lockdep check to enforce it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the support for multiple register layout removed all support
structures can be removed from the header file. Covert to a simpler
structure using defines for the register offsets.
There is no functional change, only switching from looking up offsets at
runtime to compile time.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When upstreaming the Gen4 PTP support for R-Car S4 the possibility for
different memory layouts on other Gen4 SoCs was build in. It turns out
this is not needed and instead needlessly makes the driver harder to
read, remove the support code that would have allowed different memory
layouts.
This change only deals with the public functions used by other drivers,
follow up work will clean up the rcar_gen4_ptp internals.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range()
and from there __pci_ioport_map() for the PCI IO space.
If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my
m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will
always fail and the driver will complain it couldn't map the PIO space
and return an error.
NO_IOPORT_MAP seems to cover the case where what 8139too is trying
to do cannot ever work so make 8139TOO_PIO depend on being it false
and avoid creating an unusable driver.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20250907064349.3427600-1-daniel@thingy.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because mlx5e_link_info and mlx5e_ext_link_info have holes
e.g. Azure mlx5 reports PTYS 19. Do not return it unless speed
is retrieved successfully.
Fixes: 65a5d35571849 ("net/mlx5: Refactor link speed handling with mlx5_link_info struct")
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250910003732.5973-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device support firmware logging feature. Use libie code to
initialize it and allow reading the logs using debugfs.
The commands are the same as in ice driver. Look at the description in
commit 96a9a9341cda ("ice: configure FW logging") for more info.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move whole code from ice_fwlog.c/h to libie/fwlog.c/h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Wrap libie_fwlog_register() by libie_fwlog_reregister(), which checks
first if the registration is needed. This simplifies the code and makes
the former function static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
s/ice/libie
There is no function for filling default descriptor in libie. Zero
descriptor structure and set opcode without calling the function.
Make functions that are caled only in ice_fwlog.c static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This code is only used in fwlog. Moved it there for easier lib creation.
There is a circular dependency between debugfs and fwlog. Moving to one
file is fixing it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Copy the code and:
- change ICE_AQC to LIBIE_AQC
- change ice_aqc to libie_aqc
- move definitions outside the structures
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In debugfs pass ice_fwlog structure instead of ice_pf.
The debgufs dirs specific for fwlog can be stored in fwlog structure.
Add debugfs entry point to fwlog api.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fwlog can be supported only on PF 0. Check this before calling
init/deinit functions.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The root debugfs directory should be available from driver side, not
from library. Move it out from fwlog code.
Make similar to __fwlog_init() __fwlog_deinit() and deinit debugfs
there. In case of ice only fwlog is using debugfs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fwlog code needs to communicate with FW. In ice it is done through admin
queue command. Allow indirect calling the send function to move the
specific admin queue send function from fwlog core code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Prepare the code to be moved to the library. ice_debug() won't be there
so switch to dev_dbg().
Add struct pdev pointer in fwlog to track on which pdev the fwlog was
created.
Switch the dev passed in dev_warn() to the one stored in fwlog.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The new structure is needed to make the fwlog code a library. A goal is
to drop ice_hw structure in all fwlog related functions calls.
Pass a ice_fwlog pointer across fwlog functions and use it wherever it
is possible.
Still use &hw->fwlog in debugfs code as it needs changing the value
being passed in priv. It will be done in one of the next patches.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Any other access to fwlog_cfg isn't done through a function. Follow
scheme that is used to access other fwlog_cfg elements from debugfs and
write to the log_level directly.
ice_pf_fwlog_update_module() is called only twice (from one function).
Remove it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change the function prototype to receive hw structure instead of pf to
simplify the call. Instead of passing whole event pass only msg_buf
pointer and length.
Make ice_fwlog_ring_full() static as it isn't called from any other
context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_fwlog_supported(), ice_fwlog_get() and ice_fwlog_supported() aren't
called outside the ice_fwlog.c file. Make it static and move in the file
to allow clean build.
Drop ice_fwlog_get(). It is called only from ice_fwlog_init() function
where the fwlog support is already checked. There is no need to check it
again, call ice_aq_fwlog_get() instead.
Drop no longer valid comment from ice_fwlog_get_supported().
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
runtime PM wakeups"
This reverts commit 5537a4679403 ("net: usb: asix: ax88772: drop
phylink use in PM to avoid MDIO runtime PM wakeups"), it breaks
operation of asix ethernet usb dongle after system suspend-resume
cycle.
Link: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com/
Fixes: 5537a4679403 ("net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/2945b9dbadb8ee1fee058b19554a5cb14f1763c1.1757601118.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
