| Age | Commit message (Collapse) | Author |
|---|
|
Collect TSPLL related functions and definitions and move them to
a separate file to have all TSPLL functionality in one place.
Move CGU related functions and definitions to ice_common.*
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add msgcounter to the netconsole_target struct to generate message IDs.
If the msgid_enabled attribute is true, increment msgcounter and append
msgid=<msgcounter> to sysdata buffer before sending the message.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the _show and _store functions for the msgid_enabled configfs
attribute under userdata.
Set the sysdata_fields bit accordingly.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a new sysdata field to enable assigning a per-target unique id
to each message sent to that target. This id can later be appended as
part of sysdata, allowing targets to detect dropped netconsole messages.
Update count_extradata_entries() to take the new field into account.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
fixes for 6.16-rc3
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The current cmd_ver range checking on cmd_ver < 1 && cmd_ver > 3 can
never be true because the logical operator && is being used, cmd_ver
can never be less than 1 and also greater than 3. Fix this by using
the logical || operator.
Fixes: df6146a0296e ("wifi: iwlwifi: Add a new version for mac config command")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250522121703.2766764-1-colin.i.king@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Apparently I accidentally removed this setting in my transport
configuration rework, leading to an endless stream of warnings
from the PCIe code when relevant notifications are received by
the driver from firmware. Restore it.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/e8c45d32-6129-8a5e-af80-ccc42aaf200b@gmail.com/
Fixes: 08e77d5edf70 ("wifi: iwlwifi: rework transport configuration")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250616134902.222342908ca4.I47a551c86cbc0e9de4f980ca2fd0d67bf4052e50@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
on arm64 defconfig build failed with gcc-8:
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c:208:3:
include/linux/bitfield.h:195:3: error: call to '__field_overflow'
declared with attribute error: value doesn't fit into mask
__field_overflow(); \
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:215:2: note: in expansion of macro '____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:218:1: note: in expansion of macro '__MAKE_OP'
__MAKE_OP(32)
Limit cb_size to valid range to fix it.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/7b373a4426070d50b5afb3269fd116c18ce3aea8.1748332709.git.xiaopei01@kylinos.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
Then it was restoted by commit 175e69e33c66 ("wifi: iwlwifi: restore
missing initialization of async_handlers_list").
Somehow, the initialization disappeared again.
Restote it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc3
Fix the following 3 issues:
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: carl9170: do not ping device which has failed to load firmware
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Declare netmem TX support in netdev.
As required, use the netmem aware dma unmapping APIs
for unmapping netmems in tx completion path.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-13-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5, tcp header-data split requires HW GRO to be on.
Enabling it fails when HW GRO is off.
mlx5e_fix_features now keeps HW GRO on when tcp data split is enabled.
Finally, when tcp data split is disabled, features are updated to maybe
remove the forced HW GRO.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bulk of the work is done in mlx5e_queue_mem_alloc, where we allocate
and create the new channel resources, similar to
mlx5e_safe_switch_params, but here we do it for a single channel using
existing params, sort of a clone channel.
To swap the old channel with the new one, we deactivate and close the
old channel then replace it with the new one, since the swap procedure
doesn't fail in mlx5, we do it all in one place (mlx5e_queue_start).
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250616141441.1243044-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On netdev_rx_queue_restart, a special type of page pool maybe expected.
In this patch declare support for UNREADABLE netmem iov pages in the
pool params only when header data split shampo RQ mode is enabled, also
set the queue index in the page pool params struct.
Shampo mode requirement: Without header split rx needs to peek at the data,
we can't do UNREADABLE_NETMEM.
The patch also enables the use of a separate page pool for headers when
a memory provider is installed for the queue, otherwise the same common
page pool continues to be used.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_page_frag holds the physical page itself, to naturally support
zc page pools, remove physical page reference from mlx5 and replace it
with netmem_ref, to avoid internal handling in mlx5 for net_iov backed
pages.
SHAMPO can issue packets that are not split into header and data. These
packets will be dropped if the data part resides in a net_iov as the
driver can't read into this area.
No performance degradation observed.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow allocating a separate page pool for headers when SHAMPO is on.
This will be useful for adding support to zc page pool, which has to be
different from the headers page pool.
For now, the pools are the same.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing HW capabilities, declare the feature in
netdev->vlan_features, similar to other features in mlx5e_build_nic_netdev.
No functional change here as all by default disabled features are
explicitly disabled at the bottom of the function.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two SHAMPO params are static and always the same, remove them from the
global mlx5e_params struct.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop redundant SHAMPO structure alloc/free functions.
Gather together function calls pertaining to header split info, pass
header per WQE (hd_per_wqe) as parameter to those function to avoid use
before initialization future mistakes.
Allocate HW GRO related info outside of the header related info scope.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Locally-generated MC packets have so far not been subject to MC routing.
Instead an MC-enabled installation would maintain the MC routing tables,
and separately from that the list of interfaces to send packets to as part
of the VXLAN FDB and MDB.
In a previous patch, a ip_mr_output() and ip6_mr_output() routines were
added for IPv4 and IPv6. All locally generated MC traffic is now passed
through these functions. For reasons of backward compatibility, an SKB
(IPCB / IP6CB) flag guards the actual MC routing.
This patch adds logic to set the flag, and the UAPI to enable the behavior.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/d899655bb7e9b2521ee8c793e67056b9fd02ba12.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-5-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-4-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an integer return value to mcp251x_write_bits() and use it to
propagate the one returned by mcp251x_spi_write(). Return that value on
error in the request() GPIO callback.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-3-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-2-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-1-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown
admin queue command opcode is encountered.
This prevents the function from silently succeeding on invalid input
and prevents undefined behavior by ensuring the function fails gracefully
when an unrecognized opcode is provided.
These changes improve error handling.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250616054504.1644770-2-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Correct spelling and improves the clarity of comments
"confiugration" -> "configuration"
"spilt" -> "split"
"It if is 0" -> "If it is 0"
"DQ" -> "DQO" (correct abbreviation)
- Clarify BIT(0) flag usage in gve_get_priv_flags()
- Replaced hardcoded array size with GVE_NUM_PTYPES
for clarity and maintainability.
These changes are purely cosmetic and do not affect functionality.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250616054504.1644770-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-15-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
registers.
This has to be handled differently with other pages and registers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-13-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older switches don't implement BRCM_HDR register so we should avoid
reading or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-11-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-10-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-8-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
writing them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-7-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to be able to differentiate the BCM5325 variants because:
- BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
- BCM5325E have less 512 ARL buckets instead of 1024.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-5-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 46c5176c586c ("net: dsa: b53: support legacy tags") introduced
support for legacy tags, but it turns out that BCM5325 and BCM5365
switches require the original FCS value and length, so they have to be
treated differently.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-4-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath12k_wmi_fw_stats_process() host waits until all events received. In
case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
consequently the requestor would be blocked until time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
directly; if not, follow the old way.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-4-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently ath12k_wmi_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever
reason (say ar->num_started_vdevs is 0 or firmware bug etc.) the following
condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time
when firmware stats is requested again, even if everything is working
fine, failure is expected due to the condition above will never be
satisfied.
The same applies to num_bcn as well.
Change to use non-static counters and reset them each time before firmware
stats is requested.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-3-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_get_fw_stats() is busy polling fw_stats_done flag while waiting
firmware finishing sending all events. This is not good as CPU is
monopolized and kept burning during the wait.
Change to the completion mechanism to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Reported-by: Grégoire Stein <gregoire.s93@live.fr>
Closes: https://lore.kernel.org/ath12k/AS8P190MB120575BBB25FCE697CD7D4988763A@AS8P190MB1205.EURP190.PROD.OUTLOOK.COM/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Tested-by: Grégoire Stein <gregoire.s93@live.fr>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-2-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Regarding the firmware stats events handling, the comment in
ath12k_mac_get_fw_stats() says host determines whether all events have been
received based on 'end' tag in TLV. This is wrong as there is no such tag
at all, actually host makes the decision totally by itself based on the
stats type and active pdev/vdev counts etc.
Fix it to correctly reflect the logic.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-1-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of ML connection, currently all useful links are activated at
ASSOC stage:
ieee80211_set_active_links(vif, ieee80211_vif_usable_links(vif))
this results in firmware crash when the number of links activated on the
same device is more than supported.
Since firmware supports activating at most 2 links for a ML connection,
to avoid firmware crash, host needs to select 2 links out of the useful
links. As the assoc link has already been chosen, the question becomes
how to determine partner links. A straightforward principle applied
here is that the resulted combination should achieve the best throughput.
For that purpose, ideally various factors like bandwidth, RSSI etc should
be considered. But that would be too complicate. To make it easy, the
choice is to only take hardware modes into consideration.
The SBS (single band simultaneously) mode frequency range covers 5 GHz
and 6 GHz bands. In this mode, the two individual MACs are both active,
with one working on 5g-high band and the other on 5g-low band (from
hardware perspective 5 GHz and 6 GHz bands are referred to as a 'large'
single 5 GHz band). The DBS (dual band simultaneously) mode covers 2 GHz
band and the 'large' 5 GHz band, with one MAC working on 2 GHz band and
the other working on 5 GHz band or 6 GHz band. Since 5,6 GHz bands could
provide higher bandwidth than 2 GHz band, the preference is given to SBS
mode. Other hardware modes results in only one working MAC at any given
time, so it is chosen only when both SBS are DBS are not possible.
For each hardware mode, if there are more than one partner candidate,
just choose the first one.
For now only single device MLO case is handled as it is easy. Other cases
could be addressed in the future.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-6-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of two links established on the same device in an ML connection,
depending on device's hardware mode capability, it is possible that both
links fall on the same MAC. Currently, no specific action is taken to
address this but just keep both links active. However this would result
in lower throughput compared to even one link, because switching between
these two links on the resulted MAC significantly impacts throughput.
Check if both links fall in the frequency range of a single MAC. If
so, send WMI_MLO_LINK_SET_ACTIVE_CMDID command to firmware such that
firmware can deactivate one of them. Note the decision of which link
getting deactivated is made by firmware, host only sends the vdev
lists.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-5-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
