| Age | Commit message (Collapse) | Author |
|---|
|
Sync MPI header files to revision 37 to match current firmware/spec
definitions.
No functional change.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-5-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I/Os can race with controller reset and fail.
Block requests at the mid layer when reset starts using
scsi_host_block(), and resume with scsi_host_unblock() after reset
completes.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Firmware can enter a transient fault while creating operational queues.
The driver fails the load immediately.
Add a retry loop that checks controller status and history bit after
queue creation. If either indicates a fault, retry init up to a set
limit before failing.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During enclosure reboot or expander reset, firmware may report a link
speed of 0 in "Device Add" events while the link is still coming up.
The driver drops such devices, leaving them missing even after the link
recovers.
Fix this by treating link speed 0 as 1.5 Gbps during device addition so
the device is exposed to the OS. The actual link speed will be updated
later when link-up events arrive.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Assigning ssp_task.retry_count to itself has no effect.
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Link: https://lore.kernel.org/r/20250819023006.15216-1-liuqiangneo@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Check for NULL return value with dma_alloc_coherent(), because DMA
address is not always set by dma_alloc_coherent() on failure.
Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250725083112.43975-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use min_t() to reduce the code in lpfc_sli4_driver_resource_setup() and
lpfc_nvme_prep_io_cmd(), and improve readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250815121609.384914-4-rongqianfeng@vivo.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use min()/min_t() to reduce the code in complete_scsi_command() and
hpsa_vpd_page_supported(), and improve readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250815121609.384914-3-rongqianfeng@vivo.com
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
purex_item.iocb is defined as a 64-element u8 array, but 64 is the
minimum size and it can be allocated larger. This makes it a standard
empty flex array.
This was motivated by field-spanning write warnings during FPIN testing:
https://lore.kernel.org/linux-nvme/20250709211919.49100-1-bgurney@redhat.com/
> kernel: memcpy: detected field-spanning write (size 60) of single field
> "((uint8_t *)fpin_pkt + buffer_copy_offset)"
> at drivers/scsi/qla2xxx/qla_isr.c:1221 (size 44)
I removed the outer wrapper from the iocb flex array, so that it can be
linked to 'purex_item.size' with '__counted_by'.
These changes remove the default minimum 64-byte allocation, requiring
further changes.
In 'struct scsi_qla_host' the embedded 'default_item' is now followed
by '__default_item_iocb[QLA_DEFAULT_PAYLOAD_SIZE]' to reserve space
that will be used as 'default_item.iocb'. This is wrapped using the
'TRAILING_OVERLAP()' macro helper, which effectively creates a union
between flexible-array member 'default_item.iocb' and
'__default_item_iocb'.
Since 'struct pure_item' now contains a flexible-array member, the
helper must be placed at the end of 'struct scsi_qla_host' to prevent
a '-Wflex-array-member-not-at-end' warning.
'qla24xx_alloc_purex_item()' is adjusted to no longer expect the
default minimum size to be part of 'sizeof(struct purex_item)', the
entire flexible array size is added to the structure size for
allocation.
This also slightly changes the layout of the purex_item struct, as
2-bytes of padding are added between 'size' and 'iocb'. The resulting
size is the same, but iocb is shifted 2-bytes (the original 'purex_item'
structure was padded at the end, after the 64-byte defined array size).
I don't think this is a problem.
Tested-by: Bryan Gurney <bgurney@redhat.com>
Co-developed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20250813200744.17975-10-bgurney@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use vcalloc() instead of vmalloc() followed by bitmap_zero() to simplify
the function sdebug_add_store().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250806124633.383426-3-rongqianfeng@vivo.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use vmalloc_array() instead of vmalloc() to simplify the function
ipr_alloc_dump().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250806124633.383426-2-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Comments should not have a leading plus sign.
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://lore.kernel.org/r/20250806-scsi_typo-v1-1-ec353a303b31@uniontech.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While the current code is perfectly fine (because we verify that the
device is directly attached before using attached_phy to index the
pm8001_ha->phy array), let's use the pm80xx_get_local_phy_id() helper
anyway, to reduce the chance that someone will copy paste this pattern
to other parts of the driver.
Note that in this specific case, we still need to keep the check that
the device is not behind an expander, because we do not want to clear
attached_phy of the expander if a device behind the expander disappears
(as that would disable all the other devices behind the expander).
However, if it is the expander itself that disappears, attached_phy will
be cleared, just like it would for any other directly attached device.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-22-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander.
Thus, you cannot use attached_phy to index the pm8001_ha->phy array,
without first verifying that the device is directly attached.
Use the pm80xx_get_local_phy_id() helper to make sure that we use the
local phy id to index the array, regardless if the device is directly
attached or not.
Fixes: 869ddbdcae3b ("scsi: pm80xx: corrected SATA abort handling sequence.")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-21-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid duplicated code by adding a helper to get the local phy id.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-20-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-19-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-18-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-17-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-16-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Many libsas drivers check if the parent of the device is an expander.
Create a helper that the libsas drivers will use in follow up commits.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-15-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached.
Fixes: f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 0f630c58e31a ("scsi: pm80xx: Do not use libsas port ID") broke
support for expanders. After the commit, devices behind an expander are
no longer detected.
Simply reverting the commit restores support for devices behind an
expander.
Instead of reverting the commit (and reintroducing a helper to get the
port), get the port directly from the lldd_port pointer in struct
asd_sas_port.
Fixes: 0f630c58e31a ("scsi: pm80xx: Do not use libsas port ID")
Suggested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-13-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct mempool doesn't currently exist, and thus also isn't used in
fnic.h, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250812082808.371119-1-hch@lst.de
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Back in 2017, commit 2fd260f03b6a ("PCI/AER: Remove unused .link_reset()
callback") removed .link_reset() from struct pci_error_handlers, but left
a few code comments behind which still mention it. Remove them.
The code comments in the SolarFlare Ethernet drivers point out that no
.mmio_enabled() callback is needed because the driver's .error_detected()
callback always returns PCI_ERS_RESULT_NEED_RESET, which causes
pcie_do_recovery() to skip .mmio_enabled(). That's not quite correct
because efx_io_error_detected() does return PCI_ERS_RESULT_RECOVERED under
certain conditions and then .mmio_enabled() would indeed be called if it
were implemented. Remove this misleading portion of the code comment as
well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1d72a891a7f57115e78a73046e776f7e0c8cd68f.1755008151.git.lukas@wunner.de
|
|
After a Fatal Error has been reported by a device and has been recovered
through a Secondary Bus Reset, AER updates the device's error_state to
pci_channel_io_normal before invoking its driver's ->resume() callback.
By contrast, EEH updates the error_state earlier, namely after resetting
the device and before invoking its driver's ->slot_reset() callback.
Commit c58dc575f3c8 ("powerpc/pseries: Set error_state to
pci_channel_io_normal in eeh_report_reset()") explains in great detail
that the earlier invocation is necessitated by various drivers checking
accessibility of the device with pci_channel_offline() and avoiding
accesses if it returns true. It returns true for any other error_state
than pci_channel_io_normal.
The device should be accessible already after reset, hence the reasoning
is that it's safe to update the error_state immediately afterwards.
This deviation between AER and EEH seems problematic because drivers
behave differently depending on which error recovery mechanism the
platform uses. Three drivers have gone so far as to update the
error_state themselves, presumably to work around AER's behavior.
For consistency, amend AER to update the error_state at the same recovery
steps as EEH. Drop the now unnecessary workaround from the three drivers.
Keep updating the error_state before ->resume() in case ->error_detected()
or ->mmio_enabled() return PCI_ERS_RESULT_RECOVERED, which causes
->slot_reset() to be skipped. There are drivers doing this even for Fatal
Errors, e.g. mhi_pci_error_detected().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/4517af6359ffb9d66152b827a5d2833459144e3f.1755008151.git.lukas@wunner.de
|
|
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instances are passed struct block_device *bdev argument; the only thing
it is used for (if it's used in the first place) is bdev->bd_disk.
Might as well pass that in the first place...
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Both helpers are reading the partition table of the disk specified
by block_device of some partition on it; result depends only upon
the disk in question, so we might as well pass the struct gendisk
instead.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull in outstanding commits for 6.17.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
|
|
Remove the redundant assignment if kzalloc() succeeds to avoid memory
leak.
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Function scsi_host_remove() doesn't exist, the actual function name is
scsi_remove_host().
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20250731133311.52034cc4@endymion
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Smaller set of driver updates than usual (ufs, lpfc, mpi3mr).
The rest (including the core file changes) are doc updates and some
minor bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits)
scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated
scsi: scsi_transport_fc: Add comments to describe added 'rport' parameter
scsi: bfa: Double-free fix
scsi: isci: Fix dma_unmap_sg() nents value
scsi: mvsas: Fix dma_unmap_sg() nents value
scsi: elx: efct: Fix dma_unmap_sg() nents value
scsi: scsi_transport_fc: Change to use per-rport devloss_work_q
scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
scsi: core: Fix kernel doc for scsi_track_queue_full()
scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents value
scsi: ibmvscsi_tgt: Fix typo in comment
scsi: mpi3mr: Update driver version to 8.14.0.5.50
scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems
scsi: mpi3mr: Drop unnecessary volatile from __iomem pointers
scsi: mpi3mr: Fix race between config read submit and interrupt completion
scsi: ufs: ufs-qcom: Enable QUnipro Internal Clock Gating
scsi: ufs: core: Add ufshcd_dme_rmw() to modify DME attributes
scsi: ufs: ufs-qcom: Update esi_vec_mask for HW major version >= 6
scsi: core: Use scsi_cmd_priv() instead of open-coding it
scsi: qla2xxx: Remove firmware URL
...
|
|
Don't populate the read-only arrays on the stack at run time, instead
make them static const. Also reduces overall size.
before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o
after:
text data bss dec hex filename
365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o
(gcc 14.2.0, x86-64)
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250729064930.1659007-1-colin.i.king@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
The SCSI sysfs attributes "supported_mode" and "active_mode" do not
define a store method and thus cannot be modified. Correct the
DEVICE_ATTR() call for these two attributes to not include S_IWUSR to
allow write access as they are read-only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Replace the ATA_DFLAG_ZAC device flag with the helper function
ata_dev_is_zac() testing directly the device class and device zoned
mode (me)
- Some small cleanup of ata_scsi_offline_dev() code (me)
- Improve the description of the link power management (LPM) policies
in Kconfig and in the comments defining these. Together with this,
clarify the description of the ahci driver mobile_lpm_policy module
parameter (me)
- Various code refactoring of libata LPM handling (ata_eh_set_lpm()
renaming, introduce ata_dev_config_lpm(), LPM related quirk handling,
and LPM related feature advertizing on device scan) (me)
- Avoid unnecessary device reset when revalidating after an error when
LPM is used (me)
- Do not allow setting a port/link LPM policy if LPM is not supported,
either because the controller does not support partial, slumber nor
devsleep, or when the port is an external port with hotplug
capability (me)
- Make sure that device initiated power management (DIPM) is not
enabled if the host (controller) lacks support for this feature (me)
- Improve messages and debug messages related to LPM, in particular,
reduce the number of messages signaling the lack of LPM support (me)
- Cache in memory a device general purpose log directory to avoid
having to access this log for every log page access. The intent here
is to reduce the number of read log commands when scanning or
revalidating a device (me)
- Change ata_dev_cleanup_cdl_resources() to be a static function (me)
- Rename and simplify the mode setting functions (me)
- Introduce the helper function ata_port_eh_scheduled() to check if EH
is pending or running for a port (me)
- Improve ata_eh_set_pending() (return bool instead of int) (me)
- Use sysfs_emit() instead of scnprintf() for libata-transport
attributes (Jonathan)
- Use the existing macro definiton of RDC vendor ID instead of
hardcoding it in the pata_rdc driver (Andy)
- Rework how EH is called for a port to avoid needing to pass along the
prereset, softreset, hardreset and postreset operations. The driver
API documentation for this is also updated (me)
* tag 'ata-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (28 commits)
Documentation: driver-api: Update libata error handler information
ata: libata-eh: Simplify reset operation management
ata: libata-eh: Remove ata_do_eh()
ata: pata_rdc: Use registered definition for the RDC vendor
ata: libata-eh: Make ata_eh_followup_srst_needed() return a bool
ata: libata-transport: replace scnprintf with sysfs_emit for simple attributes
ata: libata-eh: use bool for fastdrain in ata_eh_set_pending()
ata: libata: Introduce ata_port_eh_scheduled()
ata: libata-core: Rename ata_do_set_mode()
ata: libata-eh: Rename and make ata_set_mode() static
ata: libata-core: Make ata_dev_cleanup_cdl_resources() static
ata: libata-core: Cache the general purpose log directory
ata: libata_eh: Add debug messages to ata_eh_link_set_lpm()
ata: libata-core: Reduce the number of messages signaling broken LPM
ata: ahci: Disallow LPM policy control if not supported
ata: ahci: Disallow LPM policy control for external ports
ata: ahci: Disable DIPM if host lacks support
ata: libata-sata: Disallow changing LPM state if not supported
ata: libata-eh: Avoid unnecessary resets when revalidating devices
ata: libata-core: Advertize device support for DIPM and HIPM features
...
|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs 'protection info' updates from Christian Brauner:
"This adds the new FS_IOC_GETLBMD_CAP ioctl() to query metadata and
protection info (PI) capabilities. This ioctl returns information
about the files integrity profile. This is useful for userspace
applications to understand a files end-to-end data protection support
and configure the I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
- lbmd_flags:
bitmask of logical block metadata capability flags
- lbmd_interval:
the amount of data described by each unit of logical block metadata
- lbmd_size:
size in bytes of the logical block metadata associated with each
interval
- lbmd_opaque_size:
size in bytes of the opaque block tag associated with each interval
- lbmd_opaque_offset:
offset in bytes of the opaque block tag within the logical block
metadata
- lbmd_pi_size:
size in bytes of the T10 PI tuple associated with each interval
- lbmd_pi_offset:
offset in bytes of T10 PI tuple within the logical block metadata
- lbmd_pi_guard_tag_type:
T10 PI guard tag type
- lbmd_pi_app_tag_size:
size in bytes of the T10 PI application tag
- lbmd_pi_ref_tag_size:
size in bytes of the T10 PI reference tag
- lbmd_pi_storage_tag_size:
size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled"
* tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP
block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()
fs: add ioctl to query metadata and protection info capabilities
nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE
block: introduce pi_tuple_size field in blk_integrity
block: rename tuple_size field in blk_integrity to metadata_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
|
|
Damien Le Moal <dlemoal@kernel.org> says:
Martin, John,
While debugging an issue with the pm8001 driver, I generated these
cleanup patches. No functional changes overall.
These patches are against the 6.17/scsi-staging branch of the scsi tree.
Link: https://lore.kernel.org/r/20250725015818.171252-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change the type of the "gone" argument of sas_deform_port() from int to
bool. Simliarly, to be consistent, do the same change to the function
sas_unregister_domain_devices().
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-6-dlemoal@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the declaration of all functions used only within libsas from
include/scsi/sas_ata.h to drivers/scsi/libsas/sas_internal.h.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-5-dlemoal@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function sas_get_ata_info() is used only in
drivers/scsi/libsas/sas_ata.c. Remove its definition from
include/scsi/sas_ata.h and make this function static.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-4-dlemoal@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Simplify the code of sas_ata_wait_eh(), removing the local variable ap
for the pointer to the device ata_port structure. The test using
dev_is_sata() is also removed as all call sites of this function check if
the device is a SATA one before calling this function.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250725015818.171252-3-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") enabled libata EH to manage device power mode
trasitions for system suspend/resume and removed the flag from
ata_scsi_dev_config. However, since the sd_shutdown() function still
relies on the manage_system_start_stop flag, a spin-down command is not
issued to the disk with command "echo 1 > /sys/block/sdb/device/delete"
sd_shutdown() can be called for both system/runtime start stop
operations, so utilize the manage_run_time_start_stop flag set in the
ata_scsi_dev_config and issue a spin-down command during disk removal
when the system is running. This is in addition to when the system is
powering off and manage_shutdown flag is set. The
manage_system_start_stop flag will still be used for drivers that still
set the flag.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit c577ab7ba5f3bf9062db8a58b6e89d4fe370447e.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5f3 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
