| Age | Commit message (Collapse) | Author |
|---|
|
From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.
Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Do not clear the global instance of screen_info. If necessary, clearing
fields in screen_info should be done by architecture or firmware code
that maintains the firmware framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace use of screen_info state with the correct interfaces from
the aperture helpers. The state is only for architecture and firmware
code. It is not guaranteed to contain valid data. Drivers are thus
not allowed to use it.
For removing conflicting firmware framebuffers, there are aperture
helpers. Hence replace screen_info with the correct functions that will
remove conflicting framebuffers for the hypervfb driver. For GEN1 PCI
devices, the driver reads the framebuffer base and size from the PCI
BAR, and uses the range for removing the firmware framebuffer. For
GEN2 VMBUS devices no range can be detected, so the driver clears all
firmware framebuffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When built-in, the sis driver tries to detect the current display mode
from the global screen_info state. That state is only for architecture
and firmware code. Drivers should not use it directly as it's not
guaranteed to contain valid information.
Remove the mode-detection code from sis. Drivers that want to detect a
pre-set mode on probe should read the hardware registers directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently the %d format specifier is being used for unsigned int values.
Fix this by using the correct %u format specifier. Cleans up cppcheck
warnings:
warning: %d in format string (no. 1) requires 'int' but the argument
type is 'unsigned int'. [invalidPrintfArgType_sint]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The info field in struct sti_struct was used to detect the default
display device. That test is now done with the respective Linux device
and the info field is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Allocate stifb's instance of fb_info with framebuffer_alloc(). This
is the preferred way of creating fb_info with associated driver data
stored in struct fb_info.par. Requires several, but minor, changes
through out the driver's code.
The intended side effect of this patch is that the new instance of
struct fb_info now has its device field correctly set to the parent
device of the STI ROM. A later patch can detect if the device is the
firmware's primary output. It is also now correctly located within
the Linux device hierarchy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Store the ROM's parent device in each STI struct, so we can associate
the STI framebuffer with a device.
The new field will eventually replace the fbdev subsystem's info field,
which the function fb_is_primary_device() currently requires to detect
the firmware's output. By using the device instead of the framebuffer
info, a later patch can generalize the helper for use in non-fbdev code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When framebuffer gets closed, the queued deferred IO gets cancelled. This
can cause some last display data to vanish. This is problematic for users
who send a still image to the framebuffer, then close the file: the image
may never appear.
To ensure none of display data get lost, flush the queued deferred IO
first before closing.
Another possible solution is to delete the cancel_delayed_work_sync()
instead. The difference is that the display may appear some time after
closing. However, the clearing of page mapping after this needs to be
removed too, because the page mapping is used by the deferred work. It is
not completely obvious whether it is okay to not clear the page mapping.
For a patch intended for stable trees, go with the simple and obvious
solution.
Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The driver's fsync() is supposed to flush any pending operation to
hardware. It is implemented in this driver by cancelling the queued
deferred IO first, then schedule it for "immediate execution" by calling
schedule_delayed_work() again with delay=0. However, setting delay=0
only means the work is scheduled immediately, it does not mean the work
is executed immediately. There is no guarantee that the work is finished
after schedule_delayed_work() returns. After this driver's fsync()
returns, there can still be pending work. Furthermore, if close() is
called by users immediately after fsync(), the pending work gets
cancelled and fsync() may do nothing.
To ensure that the deferred IO completes, use flush_delayed_work()
instead. Write operations to this driver either write to the device
directly, or invoke schedule_delayed_work(); so by flushing the
workqueue, it can be guaranteed that all previous writes make it to the
device.
Fixes: 5e841b88d23d ("fb: fsync() method for deferred I/O flush.")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We have managed to ascertain that all users of the old FBDEV
code that are out of tree are now gone.
The new DRM driver can be found in drivers/gpu/drm/pl111/.
The remaining out of tree user was the ARM FVP emulation
platform, running Android. Thanks to changes in Android
versions 13 and 14, Android can now use the DRM driver when
being emulated under FVP. Some final patches are being put
in place to make it fully featured.
This is essentially a revert of the partial revert in
commit 112c35237c72 ("Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As far as anybody can tell, this product never shipped. If it did,
it shipped in 2007 and nobody has access to one any more. Remove the
fbdev driver and the backlight driver.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix kernel-doc warnings found when using "W=1".
hgafb.c:370: warning: No description found for return value of 'hgafb_open'
hgafb.c:384: warning: No description found for return value of 'hgafb_release'
hgafb.c:406: warning: No description found for return value of 'hgafb_setcolreg'
hgafb.c:425: warning: No description found for return value of 'hgafb_pan_display'
hgafb.c:425: warning: expecting prototype for hga_pan_display(). Prototype was for hgafb_pan_display() instead
hgafb.c:455: warning: No description found for return value of 'hgafb_blank'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-nvidia@lists.surfsouth.com
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fixes: 641b4b1b6a7c ("video: mmpdisp: add spi port in display controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Explicitly cast __iomem pointer to const void* with __force to fix the
following warning:
incorrect type in argument 1 (different address spaces)
expected void const volatile *address
got char [noderef] __iomem *screen_base
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311161120.BgyxTBMQ-lkp@intel.com/
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Linux kernel coding style uses '*/' on a separate line at the end of
multi line comments.
Fix block comments by moving '*/' at the end of block comments on a
separate line as reported by checkpatch:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Resolve the following warning reported by checkpatch:
WARNING: Prefer using '"%s...", __func__' to using 'imxfb_blank', this function's name, in a string
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Resolve the following warning reported by checkpatch:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
This made it necessary to move the 'fbi->pdev = pdev' setting to the
beginning of the driver's probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix the following checkpatch error:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Resolve the following warning reported by checkpatch:
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Resolve the following warning reported by checkpatch.pl:
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
The patch also removes some license info made redundant by the addition
of the SPDX tag.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The patch gets rid of magic numbers replacing them with appropriate
macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace opencoded masking and shifting, with BIT(), GENMASK(),
FIELD_GET() and FIELD_PREP() macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The patch moves the bitfields of the PCR register near the macro that
defines its offset, just like for all the other registers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:
In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.
The patch handles both cases.
Fixes: 4e47382fbca9 ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bcee00 ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that vesafb can modify it at
will.
v2:
* comment on devm_kmemdup() usage (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-5-tzimmermann@suse.de
|
|
Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-4-tzimmermann@suse.de
|
|
Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that efifb can modify it at
will.
v2:
* comment on devm_kmemdup() usage (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-3-tzimmermann@suse.de
|
|
Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.
v3:
* use const screen_info in several places (Sui)
* fix build for deferred takeover (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-2-tzimmermann@suse.de
|
|
When the power domains cannot be parsed, the message is incorrectly
logged as an info message. Let's change this to an error since an error
is returned.
Fixes: 92a511a568e4 ("fbdev/simplefb: Add support for generic power-domains")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212195754.232303-1-bmasney@redhat.com
|
|
The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.
Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231207161513.3195509-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Clang static analyzer complains that value stored to 'ret' is never read.
Return the error code when spi_sync() failed.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231130051155.1235972-1-suhui@nfschina.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Don't use kernel-doc notation for the local macros START_BYTE() and
CHECK_FREQ_REG(). This prevents these kernel-doc warnings:
ili922x.c:85: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* START_BYTE(id, rs, rw)
ili922x.c:85: warning: missing initial short description on line:
* START_BYTE(id, rs, rw)
ili922x.c:118: warning: expecting prototype for CHECK_FREQ_REG(spi_device s, spi_transfer x)(). Prototype was for CHECK_FREQ_REG() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231206174525.14960-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
In the function "pm3309c_parse_dt_node", when the dimming analog control
mode (by I2C messages) is enabled, the local variable "prop_levels" is
tested without any initialization, as indicated by the following smatch
warning:
drivers/video/backlight/mp3309c.c:279 pm3309c_parse_dt_node() error: uninitialized symbol 'prop_levels'.
To avoid any problem in case of undefined behavior, we need to initialize
it to "NULL".
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/af0a1870-693b-442f-9b11-0503cfcd944a@moroto.mountain/
Fixes: 2e914516a58c ("backlight: mp3309c: Add support for MPS MP3309C")
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231129164514.2772719-1-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Drop the default implementations for file read, write and mmap
operations. Each fbdev driver must now provide an implementation
and select any necessary helpers. If no implementation has been
set, fbdev returns an errno code to user space. The code is the
same as if the operation had not been set in the file_operations
struct.
This change makes the fbdev helpers for I/O memory optional. Most
systems only use system-memory framebuffers via DRM's fbdev emulation.
v2:
* warn once if I/O callbacks are missing (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-33-tzimmermann@suse.de
|
|
Test in framebuffer read, write and drawing helpers if FBINFO_VIRTFB
has been set correctly. Framebuffers in I/O memory should only be
accessed with the architecture's respective helpers. Framebuffers
in system memory should be accessed with the regular load and
store operations. Presumably not all drivers get this right, so we
now warn about it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-32-tzimmermann@suse.de
|
|
Move the default fb_mmap code for I/O address spaces into the helper
function fb_io_mmap(). The helper can either be called via struct
fb_ops.fb_mmap or as the default if no fb_mmap has been set. Also
set the new helper in __FB_DEFAULT_IOMEM_OPS_MMAP.
In the mid-term, fb_io_mmap() is supposed to become optional. Fbdev
drivers will initialize their struct fb_ops.fb_mmap to the helper
and select a corresponding Kconfig token. The helper can then be made
optional at compile time.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-31-tzimmermann@suse.de
|
|
If a driver sets struct fb_ops.fb_mmap, the fbdev core automatically
calls pgprot_decrypted(). But the default fb_mmap code doesn't handle
pgprot_decrypted().
Move the call to pgprot_decrypted() into each drivers' fb_mmap function.
This only concerns fb_mmap functions for system and DMA memory. For
I/O memory, which is the default case, nothing changes. The fb_mmap
for I/O-memory can later be moved into a helper as well.
DRM's fbdev emulation handles pgprot_decrypted() internally via the
Prime helpers. Fbdev doesn't have to do anything in this case. In
cases where DRM uses deferred I/O, this patch updates fb_mmap correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-30-tzimmermann@suse.de
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-29-tzimmermann@suse.de
|
|
Rename the token to harmonize naming among various helpers. For
example, I/O-memory helpers use FB_IOMEM_FOPS.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-28-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-25-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able address space. This explictily
sets the read/write, draw and mmap callbacks to the correct default
implementation. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requireing the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.
Set the callbacks via macros. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-24-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-23-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
The driver previously selected drawing ops for system memory
although it operates on I/O memory. Fixed now.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-22-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-20-tzimmermann@suse.de
|
|
The ps3fb driver operates on system memory. Mark the framebuffer
accordingly. Helpers operating on the framebuffer memory will test
for the presence of this flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-19-tzimmermann@suse.de
|
|
Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.
Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-18-tzimmermann@suse.de
|
|
The au1200fb driver operates on DMA-able system memory. Mark the
framebuffer accordingly. Helpers operating on the framebuffer memory
will test for the presence of this flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-17-tzimmermann@suse.de
|
