| Age | Commit message (Collapse) | Author |
|---|
|
This driver looks up the next_bridge at probe time and stores it in
hdmi->bridge.next_bridge, but only uses the stored value when attaching,
and only in the DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
This will be problematic with an upcoming change, adding an hdmi-connector
using a device tree overlay when not present. That change is in turn
necessary to migrate the i.MX LCDIF driver to the bridge-connector.
The problem is that, adding the hdmi-connector via an overlay, devlink
considers hdmi-connector a consumer of the dw-hdmi device, generating a
chicken-egg problem:
* hdmi-connector probe won't be tried until dw-hdmi is probed (devlink)
* dw-hdmi probe will defer until it finds the next_bridge (the
hdmi-connector wrapper bridge)
In preparation for those changes, move the next_bridge lookup from probe to
attach, when it is actually used. This allows dw-hdmi to probe, so that the
hdmi-connector can probe as well.
Also avoid storing the pointer in hdmi->bridge.next_bridge: the value is
computed when needed, thus a local variable is enough.
Finally, this also allows to slightly improve the code by not doing any DT
lookup in the !DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-7-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
dw-hdmi can operate in two different modes, depending on the platform data
as set by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
Only case B is supported when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is
passed to the attach callback. Emit a warning when this is violated. Also
return -EINVAL which would be returned by drm_bridge_attach() right after
anyway.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-6-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
in lcdif_attach_bridge
The bridge and ret variables are per-iteration variables, whose values
don't have to be carried to the next iteration or be used after the loop
end. Move their declaration inside the loop scope as a cleanup and to make
code clearer.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-4-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
lcdif_attach_bridge() uses dev_err_probe() in some error paths, dev_err() +
return in others. Use dev_err_probe() for all of them to make code
consistent, simpler and with better error reporting.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-3-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Putting the ep device_node reference requires a of_node_put(ep) in many
return points. Use a cleanup action to simplify the code.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-2-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Putting the remote device_node reference requires a of_node_put(remote) in
two places. Use a cleanup action to simplify the code.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-1-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The platform name will be used in the topology name.
Link: https://patch.msgid.link/20260413060800.3156425-1-yung-chuan.liao@linux.intel.com
|
|
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
Fixes: e4e5ce823bdd ("net: airoha: Add AN7583 SoC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-7583-vip-fix-v1-1-c35e02b054bb@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Stop tracking admin-only PF mode in a separate `xe->sriov.pf.admin_only`
field and use `xe_device_is_admin_only(xe)` as the single source of
admin mode.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260413095637.2871287-2-satyanarayana.k.v.p@intel.com
|
|
When a PF is configured in admin-only mode, it is intended for management
only and must not expose workload-facing capabilities to userspace.
Limit the exposed ioctl set in admin-only PF mode to XE_DEVICE_QUERY and
XE_OBSERVATION, and suppress capability-bearing query payloads so that
the userspace cannot discover execution-related device details in this
mode.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Dunajski Bartosz <bartosz.dunajski@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260409154423.2499340-5-satyanarayana.k.v.p@intel.com
|
|
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
Fixes: 90910a651123 ("drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach")
Fixes: 0d6d86253fef ("drm/bridge/synopsys: Add MIPI DSI2 host controller bridge")
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260403145208.15890-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh
Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This function gets a device_node reference via
of_graph_get_remote_port_parent() and stores it in encoder_node, but never
puts that reference. Add it.
There used to be a of_node_put(encoder_node) but it has been removed by
mistake during a rework in commit 3ea66a794fdc ("drm/arc: Inline
arcpgu_drm_hdmi_init").
Fixes: 3ea66a794fdc ("drm/arc: Inline arcpgu_drm_hdmi_init")
Cc: stable@vger.kernel.org
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260402-drm-arcgpu-fix-device-node-leak-v2-1-d773cf754ae5@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Actually verify the DDB entry for the plane we're looking
at instead of always verifying the cursor DDB.
Fixes: 7d4561722c3b ("drm/i915: Tweak plane ddb allocation tracking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-5-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
(cherry picked from commit f002f7c7439de18117a31ca84dc87a59719c3dd6)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
VESA backlight enable is possible when
BACKLIGHT_AUX_ENABLE_CAPABLE is true via AUX command or when
BACKLIGHT_PIN_ENABLE_CAPABLE is true via eDP connector pin.
Similarly, backlight brightness adjustment can be
done via AUX-based control or PWM pin-based control.
It means there can be three configurations:
1) Full AUX-based: Enable and adjustment both via AUX. We currently
support this (apart from the AUX luminance-based backlight control).
2) Hybrid: Enable via the BL_ENABLE pin, adjustment via either AUX or
PWM.
3) Fully PWM pin-based: Enable via the BL_ENABLE pin, adjustment via
PWM.
Since that only 1 is supported as of now we need to make
sure we do not try to manipulate backlight when
BACKLIGHT_AUX_ENABLE_CAPABLE is not set.
Also fix return value when condition is not fulfilled.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15907
Fixes: 0fb03890d182 ("drm/i915/backlight: Check if VESA backlight is possible")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260407030710.1440046-1-suraj.kandpal@intel.com
(cherry picked from commit 102d44b3a8fad96e94e9ccd0579986c14a1f2f75)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The suballocator algorithm tracks a hole cursor at the last allocation
and tries to allocate after it. This is optimized for fence-ordered
progress, where older allocations are expected to become reusable first.
In fence-enabled mode, that ordering assumption holds. In fence-disabled
mode, allocations may be freed in arbitrary order, so limiting allocation
to the current hole window can miss valid free space and fail allocations
despite sufficient total space.
Use DRM memory manager instead of sub-allocator to get rid of this issue
as CCS read/write operations do not use fences.
Fixes: 864690cf4dd6 ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408110145.1639937-6-satyanarayana.k.v.p@intel.com
|
|
Add a memory pool to allocate sub-ranges from a BO-backed pool
using drm_mm.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408110145.1639937-5-satyanarayana.k.v.p@intel.com
|
|
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return.
Fixes: 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With commit f84b21da3624 ("PCI: hv: Don't load the driver for baremetal root partition"),
the bare metal Linux root partition won't use the pci-hyperv driver, but
when a Linux VM runs on the Linux root partition, pci-hyperv's module_init
function init_hv_pci_drv() can still run, e.g. in the case of
CONFIG_PCI_HYPERV=y, even if the VMBus driver is not used in such a VM
(i.e. the hv_vmbus driver's init function returns -ENODEV due to
vmbus_root_device being NULL).
In such a Linux VM, init_hv_pci_drv() runs with a side effect: the 3
hvpci_block_ops callbacks are set to functions that depend on hv_vmbus.
Later, when the MLX driver in such a VM invokes the callbacks, e.g. in
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c:
mlx5_hv_register_invalidate(), hvpci_block_ops.reg_blk_invalidate() is
hv_register_block_invalidate() rather than a NULL function pointer, and
hv_register_block_invalidate() assumes that it can find a struct
hv_pcibus_device from pdev->bus->sysdata, which is false in such a VM.
Consequently, hv_register_block_invalidate() -> get_pcichild_wslot() ->
spin_lock_irqsave() may hang since it can be accessing an invalid
spinlock pointer.
Fix the issue by exporting hv_vmbus_exists() and using it in pci-hyperv:
hv_root_partition() is true and hv_nested is false ==>
hv_vmbus_exists() is false.
hv_root_partition() is true and hv_nested is true ==>
hv_vmbus_exists() is true.
hv_root_partition() is false ==> hv_vmbus_exists() is true.
While at it, rename vmbus_exists() to hv_vmbus_exists() to follow the
convention that all public functions have the hv_ prefix; also change
the return value's type from int to bool to make the code more readable;
also move the two pr_info() calls.
Reported-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduces various trace events and use them in the corresponding places
in the driver.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When checking for VMBus channel interrupts, current code always scans the
full SynIC receive interrupt bit array to get the relid of the
interrupting channels. The array has HV_EVENT_FLAGS_COUNT (2048) bits.
But VMs rarely have more than 100 channels, and the relid is typically
a small integer that is densely assigned by the Hyper-V host. It's
wasteful to scan 2048 bits when it is highly unlikely that anything will
be found past bit 100. The waste is double with Confidential VMBus because
there are two receive interrupt arrays that must be scanned: one for the
hypervisor SynIC and one for the paravisor SynIC.
Improve the scanning by tracking the largest relid that has been offered
by the Hyper-V host. Then when checking for VMBus channel interrupts, only
scan up to this high water mark.
When channels are rescinded, it's not worth the complexity to recalculate
the high water mark. Hyper-V tends to reuse the rescinded relids for any
new channels that are subsequently added, and the performance benefit of
exactly tracking the high water mark would be minimal.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Roman Kisel <vdso@mailbox.org>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"For this release we have an extension of the pwrseq-pcie-m2 driver
with support for PCIe M.2 Key E connectors.
The rest of the commits fulfill a supporting role: document the
hardware in DT bindings, provide required serdev helpers (this has
been provided in an immutable branch to Rob Herring so you may see it
in his PR as well) and is followed up by some Kconfig fixes from Arnd.
Summary:
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E
connectors"
* tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency
power: sequencing: pcie-m2: enforce PCI and OF dependencies
power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector
dt-bindings: serial: Document the graph port
serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used
serdev: Add an API to find the serdev controller associated with the devicetree node
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes and simplifications, driver fixes and
new hardware support (SDM670, Eliza SoC), new driver features (hwmon
support in imx91, DDR data rate on Nova Lake in int340x), and a
handful of cleanups:
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with
cpumask_empty() which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver
(Manaf Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver
(Krzysztof Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Convert DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal: core: Suspend thermal zones later and resume them earlier
thermal: core: Allocate thermal_class statically
thermal: core: Adjust thermal_wq allocation flags
thermal: core: Drop redundant check from thermal_zone_device_update()
thermal: core: Free thermal zone ID later during removal
thermal: core: Fix thermal zone governor cleanup issues
thermal/core: Remove pointless variable when registering a cooling device
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
thermal: devfreq_cooling: avoid unnecessary kfree of freq_table
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: sysfs: Use str_enabled_disabled() helper in mode_show()
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
|
|
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026041159-garter-theft-3be0@gregkh
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- randomize_kstack: Improve implementation across arches (Ryan Roberts)
- lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
- refcount: Remove unused __signed_wrap function annotations
* tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
refcount: Remove unused __signed_wrap function annotations
randomize_kstack: Unify random source across arches
randomize_kstack: Maintain kstack_offset per task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
|
|
PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration performed in
airoha_fe_init() is used to duplicate multicast packets and send a copy
to the CPU when the traffic is offloaded. This is necessary just if
it is requested by the user. Disable multicast packets duplication by
default.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha_fe_init_remove_mc_en_bit-v1-1-7b6a5a25a74d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove airoha_gdm_port dependency in ETS tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-3-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove airoha_gdm_port dependency in HTB tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-2-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove airoha_gdm_port dependency in airoha_dev_setup_tc_block routine
signature and rely on net_device pointer instead. Please note this patch
does not introduce any logical change and it is a preliminary patch to
support multiple net_devices connected to the GDM3 or GDM4 ports via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-1-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Poll free-running firmware RMON counters every 2 seconds and accumulate
deltas into 64-bit per-port statistics. 32-bit packet counters wrap
in ~220s at 10 Gbps line rate with minimum-size frames; the 2s polling
interval provides a comfortable margin. The .get_stats64 callback
forces a fresh poll so that counters are always up to date when queried.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/fa38548ba05866879e8912721edc91947ce4ff12.1775951347.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MxL862xx firmware exposes per-port RMON counters through the
RMON_PORT_GET command, covering standard IEEE 802.3 MAC statistics
(unicast/multicast/broadcast packet and byte counts, collision
counters, pause frames) as well as hardware-specific counters such
as extended VLAN discard and MTU exceed events.
Add the RMON counter firmware API structures and command definitions.
Implement .get_strings, .get_sset_count, and .get_ethtool_stats for
legacy ethtool -S support. Implement .get_eth_mac_stats,
.get_eth_ctrl_stats, and .get_pause_stats for the standardized
IEEE 802.3 statistics interface.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/480be14d5ed51f3db7b1681b298044dbf8e87494.1775951347.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the magic number with an existing define for the LEDCR
register page number on the RTL8211F.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260411105150.184577-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Add a callback driven main loop for io_uring, and BPF struct_ops
on top to allow implementing custom event loop logic
- Decouple IOPOLL from being a ring-wide all-or-nothing setting,
allowing IOPOLL use cases to also issue certain white listed
non-polled opcodes
- Timeout improvements. Migrate internal timeout storage from
timespec64 to ktime_t for simpler arithmetic and avoid copying of
timespec data
- Zero-copy receive (zcrx) updates:
- Add a device-less mode (ZCRX_REG_NODEV) for testing and
experimentation where data flows through the copy fallback path
- Fix two-step unregistration regression, DMA length calculations,
xarray mark usage, and a potential 32-bit overflow in id
shifting
- Refactoring toward multi-area support: dedicated refill queue
struct, consolidated DMA syncing, netmem array refilling format,
and guard-based locking
- Zero-copy transmit (zctx) cleanup:
- Unify io_send_zc() and io_sendmsg_zc() into a single function
- Add vectorized registered buffer send for IORING_OP_SEND_ZC
- Add separate notification user_data via sqe->addr3 so
notification and completion CQEs can be distinguished without
extra reference counting
- Switch struct io_ring_ctx internal bitfields to explicit flag bits
with atomic-safe accessors, and annotate the known harmless races on
those flags
- Various optimizations caching ctx and other request fields in local
variables to avoid repeated loads, and cleanups for tctx setup, ring
fd registration, and read path early returns
* tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (58 commits)
io_uring: unify getting ctx from passed in file descriptor
io_uring/register: don't get a reference to the registered ring fd
io_uring/tctx: clean up __io_uring_add_tctx_node() error handling
io_uring/tctx: have io_uring_alloc_task_context() return tctx
io_uring/timeout: use 'ctx' consistently
io_uring/rw: clean up __io_read() obsolete comment and early returns
io_uring/zcrx: use correct mmap off constants
io_uring/zcrx: use dma_len for chunk size calculation
io_uring/zcrx: don't clear not allocated niovs
io_uring/zcrx: don't use mark0 for allocating xarray
io_uring: cast id to u64 before shifting in io_allocate_rbuf_ring()
io_uring/zcrx: reject REG_NODEV with large rx_buf_size
io_uring/cancel: validate opcode for IORING_ASYNC_CANCEL_OP
io_uring/rsrc: use io_cache_free() to free node
io_uring/zcrx: rename zcrx [un]register functions
io_uring/zcrx: check ctrl op payload struct sizes
io_uring/zcrx: cache fallback availability in zcrx ctx
io_uring/zcrx: warn on a repeated area append
io_uring/zcrx: consolidate dma syncing
io_uring/zcrx: netmem array as refiling format
...
|
|
When auxiliary_device_add() fails, the error block calls
auxiliary_device_uninit() but does not return. The uninit drops the
last reference and synchronously runs bnge_aux_dev_release(), which sets
bd->auxr_dev = NULL and frees the underlying object. The subsequent
bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a
good thing to have happen when trying to clean up from an error.
Add the missing return, as the auxiliary bus documentation states is a
requirement (seems that LLM tools read documentation better than humans
do...)
Cc: Vikas Gupta <vikas.gupta@broadcom.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Fixes: 8ac050ec3b1c ("bng_en: Add RoCE aux device support")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026041124-banshee-molecular-0f70@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
|
|
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure.
Fixes: 1cd3b407977c ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260409184009.930359-3-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce octep_vf_oq_next_idx() to consolidate the repeated
ring index advance and wraparound pattern in __octep_vf_oq_process_rx().
No functional change intended.
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260409184009.930359-2-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As noted in the blamed commit, the AR8035 and other PHYs from this
family advertise the Extended Next Page support by default, which may be
understood by some partners as this PHY being multi-gig capable.
The fix is to disable XNP advertising, which is done by setting bit 12
of the Auto-Negotiation Advertisement Register (MII_ADVERTISE).
The blamed commit incorrectly uses MDIO_AN_CTRL1_XNP, which is bit 13 as per
802.3 : 45.2.7.1 AN control register (Register 7.0)
BIT 12 in MII_ADVERTISE is wrapped by ADVERTISE_RESV, used by some
drivers such as the aquantia one. 802.3 Clause 28 defines bit 12 as
Extended Next Page ability, at least in recent versions of the standard.
Let's add a define for it and use it in the at803x driver.
Fixes: 3c51fa5d2afe ("net: phy: ar803x: disable extended next page bit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260410171021.1277138-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable receive process stopped and receive buffer unavailable
interrupts, so that the statistic counters can be updated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1wBBaR-0000000GZHR-1dbM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
* tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (59 commits)
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Bluetooth: btmtk: refactor endpoint lookup
...
====================
Link: https://patch.msgid.link/20260413132247.320961-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver is implementing its own .release(), which means that it needs
to call vfio_pci_core_release_dev().
Add the missing call.
Fixes: 1f5556ec8b9ef ("vfio/xe: Add device specific vfio_pci driver variant for Intel graphics")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/kvm/408e262c507e8fd628a71e39904fedd99fa0ee8e.camel@linux.ibm.com/
Cc: stable@vger.kernel.org
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260410224948.900550-2-michal.winiarski@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Attempting to issue reset on VF devices that don't support migration
leads to the following:
BUG: unable to handle page fault for address: 00000000000011f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy)
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe]
Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89
RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202
RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800
R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0
FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci]
pci_dev_restore+0x3b/0x80
pci_reset_function+0x109/0x140
reset_store+0x5c/0xb0
dev_attr_store+0x17/0x40
sysfs_kf_write+0x72/0x90
kernfs_fop_write_iter+0x161/0x1f0
vfs_write+0x261/0x440
ksys_write+0x69/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x259/0x26e0
do_syscall_64+0xcb/0x1500
? __fput+0x1a2/0x2d0
? fput_close_sync+0x3d/0xa0
? __x64_sys_close+0x3e/0x90
? x64_sys_call+0x1b7c/0x26e0
? do_syscall_64+0x109/0x1500
? __task_pid_nr_ns+0x68/0x100
? __do_sys_getpid+0x1d/0x30
? x64_sys_call+0x10b5/0x26e0
? do_syscall_64+0x109/0x1500
? putname+0x41/0x90
? do_faccessat+0x1e8/0x300
? __x64_sys_access+0x1c/0x30
? x64_sys_call+0x1822/0x26e0
? do_syscall_64+0x109/0x1500
? tick_program_event+0x43/0xa0
? hrtimer_interrupt+0x126/0x260
? irqentry_exit+0xb2/0x710
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7877d5f1c5a4
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4
RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009
RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9
R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0
</TASK>
This is caused by the fact that some of the xe_vfio_pci_core_device
members needed for handling reset are only initialized as part of
migration init.
Fix the problem by reorganizing the code to decouple VF init from
migration init.
Fixes: 1f5556ec8b9ef ("vfio/xe: Add device specific vfio_pci driver variant for Intel graphics")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7352
Cc: stable@vger.kernel.org
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260410224948.900550-1-michal.winiarski@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
mlx4_master_process_vhcr() logs vhcr->errno on failures, but this field
is never populated by the PF path. As a result, all failures are reported
with errno 0 and err print in status case which is misleading.
Use the actual return value (err) instead, translate it to FW status
before logging, and report both values.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260409092754.508880-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware-supplied flat DT properties are raw byte sequences. Several
early FDT helpers fetch properties such as status, model, compatible,
and device_type and then use them as C strings with strcmp(), strlen(),
or pr_info() without first proving that the property is NUL-terminated
within its declared length.
Use fdt_stringlist_get() for these string properties instead. That
preserves the existing behavior for valid DTBs while rejecting malformed
unterminated properties before they are passed to C string helpers.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260403164501.1-drivers-of-fdt-v2-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
early_init_dt_scan_chosen_stdout() fetches stdout-path and
linux,stdout-path directly from the flat DT and immediately passes the
result to strchrnul(). Flat DT properties are raw firmware-supplied
byte sequences, and this path does not prove that either property is
NUL-terminated within its declared bounds.
Use fdt_stringlist_get() so malformed unterminated stdout-path
properties are rejected before the local parser walks them as C
strings.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260403143001.1-dt-fdt-stdout-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
