| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE fixes for v7.1
Fixing:
- params_from_user() cleanup in error path in tee_ioctl_supp_recv()
- possible tee_shm leak in error path in register_shm_helper()
- padding in struct tee_ioctl_object_invoke_arg
* tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The linux/pm_domain.h header is not used in this file. Remove it to
keep the includes clean.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260524082657.19335-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the DSC module clock for Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260515-rcar-du-dsc-v3-1-164157820498@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Use tab instead of spaces to follow the same coding style.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260528080439.615958-5-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Keep the documentation for struct rzg2l_pinctrl_reg_cache members aligned
with the struct member order.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260528080439.615958-4-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The pinctrl and GPIO core code make exceptions for the -ENOTSUPP error
code. One such example is gpio_set_config_with_argument_optional(), which
returns success when gpio_set_config_with_argument() returns -ENOTSUPP, but
reports failure for all other error codes.
Returning -EOPNOTSUPP from the pinctrl driver on the unsupported pinctrl
operation may lead to boot failures when pinctrl drivers implements
struct gpio_chip::set_config, the system uses GPIO hogs, and the
struct gpio_chip::set_config implementation returns -EOPNOTSUPP for the
unsupported operations.
Currently, the driver does not implement struct gpio_chip::set_config().
To avoid future failures, return -ENOTSUPP from
rzv2m_pinctrl_pinconf_set().
rzv2m_pinctrl_pinconf_group_get() is used when dumping pinctrl
configuration. pinconf_generic_dump_one(), which calls it, makes
exceptions for the -EINVAL and -ENOTSUPP error codes. The documentation
for struct pinconf_ops::pin_config_group_get states that it "should
return -ENOTSUPP and -EINVAL using the same rules as pin_config_get()".
The documentation for struct pinconf_ops::pin_config_get states:
"get the config of a certain pin, if the requested config is not available
on this controller this should return -ENOTSUPP and if it is available but
disabled it should return -EINVAL".
Return -ENOTSUPP for the unsupported pinctrl operation.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260522105717.1727837-1-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
spi_mem_supports_op() accepts a const struct spi_mem_op pointer but
casts away const internally to call spi_mem_adjust_op_freq(). This
mutates the caller's op template, which causes stale max_freq values
when callers reuse persistent templates - subsequent calls won't
re-apply the device frequency cap since spi_mem_adjust_op_freq()
skips non-zero values.
Fix by operating on a stack-local copy instead.
Fixes: a4f8e70d75dd ("spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()")
Cc: Tianyu Xu <xtydtc@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260527173736.2243004-1-s-k6@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Due to a hardware issue, L0s is not properly supported by the PCIe
controller on the SA8775p SoC. If enabled, the L0s to L0 transition
triggers below correctable AER errors and may also affect link stability:
pcieport 0000:00:00.0: PME: Signaling with IRQ 332
pcieport 0000:00:00.0: AER: enabled with IRQ 332
pcieport 0000:00:00.0: AER: Correctable error message received from 0000:01:00.0
pci 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
pci 0000:01:00.0: device [17cb:1103] error status/mask=00001000/0000e000
pci 0000:01:00.0: [12] Timeout
pcieport 0000:00:00.0: AER: Multiple Correctable error message received from 0000:01:00.0
pcieport 0000:00:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:00.0: device [17cb:0115] error status/mask=00001000/0000e000
pcieport 0000:00:00.0: [12] Timeout
Hence, disable L0s for the SA8775p SoC to allow it to properly function
by sacrificing a little bit of power saving.
Fixes: 58d0d3e032b3 ("PCI: qcom-ep: Add support for SA8775P SOC")
Assisted-by: Claude:claude-4-6-sonnet
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
[mani: commit log, corrected fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260419093934.1223027-1-shengchao.guo@oss.qualcomm.com
|
|
The frequency monitoring feature uses shared hardware registers
that measure input reference frequencies independently of
individual DPLL channels. However, the freq_monitor flag was
incorrectly placed in the per-DPLL structure, causing each
channel to track its own enable/disable state independently.
Since the DPLL core calls measured_freq_get() only for the first
pin registration, the measured_freq_check() in the periodic worker
was gated by the per-DPLL freq_monitor flag of whichever channel
happens to be checked. If the first DPLL channel had frequency
monitoring disabled while another had it enabled, measurements
were never reported.
Move freq_monitor from struct zl3073x_dpll to struct zl3073x_dev
so all DPLL channels share a single flag, matching the hardware
behavior. Update freq_monitor_set() to notify other DPLL devices
about the change (like phase_offset_avg_factor_set() already does)
and remove the mode-dependent guard in zl3073x_dpll_changes_check()
since all input pin monitoring (pin state, phase offset, FFO, and
measured frequency) works correctly in all DPLL modes.
Fixes: bfc923b642874 ("dpll: zl3073x: implement frequency monitoring")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer.
Fixes: 9363b4837659 ("dpll: zl3073x: Allow to configure phase offset averaging factor")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export __dpll_device_change_ntf() so that drivers can send device
change notifications from within device callbacks, which are already
called under dpll_lock. Using dpll_device_change_ntf() in that
context would deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260526074525.1451008-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_wq, which will be deprecated soon and replaced by
system_percpu_wq.
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
The function(s) mentioned earlier, end up calling __queue_delayed_work(),
which set a global timer that could fire anywhere, enqueuing the work
where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_wq with system_dfl_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260515145851.318787-1-marco.crivellari@suse.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
i2c_device_id
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519154040.1594878-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching all these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519144341.1589034-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
nvme_tcp_tls_done() assigns queue->tls_err in three branches. The
ENOKEY lookup failure and the EOPNOTSUPP initializer both store
negative errnos. The third branch, reached when the handshake
layer reports a non-zero status, stores -status.
The handshake layer delivers status to the consumer callback as a
negative errno; the other in-tree consumers --
xs_tls_handshake_done() and the nvmet target callback -- treat
their status argument that way. The extra negation in
nvme_tcp_tls_done() flips the sign, leaving tls_err as a positive
value (for instance, +EIO), which nvme_tcp_start_tls() then
returns to its caller.
Drop the extra negation so queue->tls_err uniformly carries a
negative errno on failure.
Fixes: be8e82caa685 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-2-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the intel_dp_sdp_min_guardband() accounts for AS_SDP for all
platforms that support adaptive sync SDP even for configurations where
it cannot be enabled. Instead account for adaptive sync SDP guardband
only when it is enabled.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-13-ankit.k.nautiyal@intel.com
|
|
Currently AS SDP is only configured when VRR is enabled.
With optimized guardband, we also need to account for wakeup time and other
relevant details that depend on the AS SDP position whenever AS SDP is
enabled. If a feature enabling AS SDP gets turned on later (after modeset),
the guardband might not be sufficient and may need to increase, triggering
a full modeset.
Additionally, for Panel Replay with Aux-less ALPM where the sink does
not support asynchronous video timing in PR active, the source must
keep transmitting Adaptive-Sync SDPs while PR is active.
So, always send AS SDP whenever there is a possibility to use it for VRR
OR for Panel Replay for synchronization.
v2: Check if AS SDP can be used for synchronization for VRR or PR. (Ville)
v3: Use intel_psr_needs_alpm_aux_less() instead of
intel_alpm_is_alpm_aux_less() to avoid including the LOBF case. (Ville)
Modify the commit message and subject.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-12-ankit.k.nautiyal@intel.com
|
|
A subsequent change makes intel_dp_needs_as_sdp() depend on
crtc_state->has_panel_replay, which is set by intel_psr_compute_config().
Move call for intel_dp_compute_as_sdp() after the
intel_psr_compute_config().
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-11-ankit.k.nautiyal@intel.com
|
|
DP v2.1 allows the source to temporarily suspend Adaptive-Sync SDP
transmission while Panel Replay is active when the sink supports
asynchronous video timing.
In such cases, the sink relies on the last transmitted AS SDP timing
information to maintain the refresh rate. To support this behavior,
compute and populate the coasting vtotal field in the AS SDP payload.
Include coasting vtotal in AS SDP packing, unpacking, and comparison,
and set it during late AS SDP configuration for PR with Aux-less ALPM
when asynchronous video timing is supported.
Note:
The coasting vtotal value is fully under driver control i.e. the HW does
not overwrite these payload bytes. HW only samples the PR_ALPM_CTL[AS SDP
Transmission in Active Disable] bit during PR active state and reflects it
in the AS SDP payload at the appropriate time.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-10-ankit.k.nautiyal@intel.com
|
|
For Panel Replay with AUX-less ALPM (link-off PR), the source must send
Adaptive-Sync SDP v2. Program DB[1:0] per DP spec v2.1:
- VRR AVT: 00b (variable VTotal)
- VRR FAVT: 10b/11b (TRR not reached/reached)
- Fixed timing with PR link-off (VRR off): 01b (AS disabled; VTotal fixed)
Also, drop the redundant target_rr assignment.
v2: Fix the else case. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-9-ankit.k.nautiyal@intel.com
|
|
If a Panel Replay capable sink, supports Async Video timing in
PR active state, then source does not necessarily need to send AS SDPs
during PR active.
However, if asynchronous video timing is not supported, then for PR with
Aux-less ALPM, the source must transmit Adaptive-Sync SDPs for video
timing synchronization while PR is active.
If the source needs to send AS SDP during PR active, this requires setting
DPCD 0x0107[6] (FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE). This applies whether
VRR is enabled (AVT/FAVT) or fixed-timing mode is used.
This bit defines AS SDP timing behavior during PR Active, even if AS SDPs
are briefly suspended.
Program the relevant Downspread Ctrl DPCD bits accordingly.
v2: Instead of Panel Replay check simply use AS SDP enable check. (Ville)
v3: Since the bit is defined in context of Panel Replay and AS SDP, add
a check for both. (Ville)
v4: Extract pr_with_as_sdp logic into helper function. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-8-ankit.k.nautiyal@intel.com
|
|
Panel Replay requires the AS SDP transmission time to be written into
PANEL_REPLAY_CONFIG3. This field was previously not programmed.
Use the AS SDP transmission-time helper to populate CONFIG3.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-7-ankit.k.nautiyal@intel.com
|
|
AS SDP may be transmitted at T1 or T2 depending on Panel Replay and
Adaptive Sync SDP configuration as per DP 2.1. Current we are using
T1 only, but future PR/AS SDP modes/features may require T2 or dynamic
selection.
Introduce a helper to return the appropriate AS SDP transmission time so
that a single value is consistently used for programming PR_ALPM.
For now this returns T1.
v2: Avoid adding new member to crtc_state; use a helper. (Ville)
v3: Clarify why AS SDP transmission time is fixed to T1. (Ville)
v4: Return u8 from intel_dp_as_sdp_transmission_time(). (Ville)
Bspec: 68920
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-6-ankit.k.nautiyal@intel.com
|
|
Replace the consecutive single-byte writes to PANEL_REPLAY_CONFIG and
CONFIG2 with one drm_dp_dpcd_write() burst starting at PANEL_REPLAY_CONFIG,
reducing AUX transactions.
v2: Drop extra conditions, and optimize variables. (Ville)
v3: Drop the error check after write. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-5-ankit.k.nautiyal@intel.com
|
|
We do not support AS SDP version 1, so allow AS SDP only if AS SDP v2 is
supported.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-4-ankit.k.nautiyal@intel.com
|
|
eDP v1.5a advertises support for Adaptive Sync SDP and with that the
support for AS SDP v2 is mandatory.
DP v2.1 SCR advertises support for FAVT payload fields parsing in DPCD
0x2214 Bit 2. This indicates the support for Adaptive-Sync SDP version 2
(AS SDP v2), which allows the source to set the version in HB2[4:0] and the
payload length in HB3[5:0] of the AS SDP header.
DP v2.1 SCR also introduces ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR in the
Panel Replay Capability DPCD 0x00b1 (Bit 3). When this bit is set, the sink
does not support asynchronous video timing while in a Panel Replay Active
state and the source is required to keep transmitting Adaptive-Sync
SDPs. The spec mandates that such sinks shall support AS SDP v2.
Infer AS SDP v2 support from these capabilities and store it in
struct intel_dp for use by subsequent feature enablement changes.
v2:
- Include parsing ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR bit to
determine AS SDP v2 support. (Ville)
v3:
- Use helper to determine asynch video timing support.
v4:
- Add AS SDP v2 support for eDP as per v1.5a.
- Add a check for Panel Replay support before checking for Async video
timing support in PR
- Add a TODO for Display ID and PCON considerations. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-3-ankit.k.nautiyal@intel.com
|
|
Introduce a helper to check if Panel Replay has Async Video Timing support
during PR Active state.
v2: Confirm that Panel Replay is supported before checking for
Async Video Timing Support during PR active. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260527041050.601735-2-ankit.k.nautiyal@intel.com
|
|
The Lenovo GameZone/Other interfaces have some delicate divergences
among different devices. When making a bug report or adding support for
new devices/interfaces, capdata is the most important information to
cross-check with.
Add a debugfs file (lenovo_wmi/<device_name>/capdata), so that users can
dump capdata and include it in their reports.
Since `struct capdata01' is just an extension to `struct capdata00',
also convert the former to include the latter anonymously
(-fms-extensions, since v6.19). This is declared as a union in the
capdata01 struct, with both the anonymous declaration and as a named
member to avoid type casting when passing just the capdata00 struct
pointer.
Tested-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We are about to add debugfs support for lenovo-wmi-capdata. Let's setup
a debugfs directory called "lenovo_wmi" for tidiness, so that any
lenovo-wmi-* device can put its subdirectory under the directory.
Subdirectories will be named after the corresponding WMI devices.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some Lenovo BIOS have been shown to have incomplete and/or broken
capability data and WMI attribute IDs. In some cases the capability data
reports that a feature is not supported when the get/set methods are
fully implemented. It is also possible that the ACPI methods from the
ideapad_laptop driver we defer to could be bugged while the WMI method
is fully working. To aid end users in submitting more complete bug
reports in these situations, add an override to skip the ACPI and
compatibility checks to force load the power supply extension as if it
is fully supported and has no conflicts.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add charge_behaviour and charge_types attributes through a power supply
extension for devices that support WMI based charge enable & disable.
Lenovo Legion devices that implement WMI function and capdata ID
0x03010001 in their BIOS are able to enable or disable charging at 80%
through the lenovo-wmi-other interface. Add a charge_types attribute for
BATX devices to expose this capability with Standard and Long_Life types
enabled.
Additionally, devices that support WMI function and capdata ID 0x03020000
are able to force discharge of the battery. Expose this capability with
a charge_behaviour attribute in the power supply extension, with the auto
and force-discharge behaviors enabled. The GET method for this attribute
is bugged. After analyzing the DSDT, and some testing, it appears the
method grabs bit(3) instead of bit(4) from the EC register that stores the
current status, and will only report if charging has been inhibited or
not. To work around this, store and report the last setting written to the
attribute.
As some devices only expose one attribute or the other, a bitmask is
added with a lookup table and some helper macros to select the correct
configuration for the hardware at runtime.
The ideapad_laptop driver provides the charge_types attribute to provide
similar functionality. When the WMI method is set this can corrupt the
ACPI method return and cause hardware and driver errors. To avoid
conflicts between the drivers, we get the acpi_handle and do the same
check that ideapad_laptop does when it enables the feature. If the
feature is supported in ideapad_laptop, abort adding the extension from
lenovo-wmi-other. The ACPI method is more reliable when both are
present from my testing, so we can prefer that implementation and do
not need to worry about de-conflicting from inside that driver.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In the next patch a power supply extension is added which requires
a name attribute. Instead of creating another const macro with the
same information, rename LWMI_OM_FW_ATTR_BASE_PATH to
LWMI_OM_SYSFS_NAME.
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use an enum for all GPU attribute feature ID's and add GPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use an enum for all device ID's and CPU attribute feature ID's,
add missing CPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The dma_rmb() barrier was placed before dma_sync_single_for_cpu(), which
is incorrect. DMA sync must complete first to make the buffer accessible
to the CPU, then the rmb barrier ensures subsequent descriptor reads
observe the latest data written by the hardware.
Reorder the operations so dma_sync_single_for_cpu() is called before
dma_rmb() to guarantee the driver reads consistent data from the DMA
buffer.
Fixes: f72e25594061 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When SMMU is disabled, the hibmcge driver may receive corrupted packets.
The hardware writes packet data and descriptors to the same page, but
with Relaxed Ordering enabled, PCI write transactions may not be
strictly ordered. This can cause the driver to observe a valid
descriptor before the corresponding packet data is fully written.
Fix this by clearing PCI_EXP_DEVCTL_RELAX_EN in the PCI bridge control
register to ensure strict write ordering between packet data and
descriptors.
Fixes: f72e25594061 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the DW5826e is in a frozen state and unable to receive USB commands,
this driver provides a method for the user to reset the DW5826e via ACPI.
E.g: echo 1 > /sys/bus/platform/devices/PALC0001\:00/wwan_reset
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Jack Wu <jackbb_wu@compal.com>
Link: https://patch.msgid.link/20260526-dell-reset-v8-v8-1-d3a29cb4cf2f@compal.com
[ij: removed default m]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enable battery charge modes on supported TUXEDO devices by adding the
feature bit to the respective device descriptors.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260512232145.329260-9-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Many Uniwill-based devices do not supports the already existing
charge limit functionality, but instead support an alternative
interface for controlling the battery charge algorithm.
Add support for this interface and update the documentation.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-8-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It turned out that EC_ADDR_OEM_4 also contains bits with a volatile
nature. Mark the whole register as volatile to prepare for the usage
of said bits. This also means that we now have to save/restore the
touchpad toggle state ourself.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-7-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently the suspend handling for the FN lock and super key enable
features saves the whole values of the affected registers instead of
the individual feature state. This duplicates the register access
logic from the associated sysfs attributes.
Rework the suspend handling to reuse said register access logic and
only store the individual feature state as a boolean value.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-6-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge uniwill driver fixes to the for-next branch to be able to continue
feature work there.
|
|
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.
Fixes: 559c1e1e0134 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Convert to use test_and_clear_bit() for link event subtasks. Only re-arm
the WX_FLAG_NEED_MODULE_RESET flag when module is absent. Unsupported or
invalid modules no longer cause the service task to continuously retry
module identification.
Additionally, explicitly cancel service_task during device teardown to
ensure no pending asynchronous service work survives after the device
has entered the DOWN state.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260525100543.27140-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After introducing WX_STATE_DOWN, wx_update_stats() now explicitly skips
statistics collection while the device is in teardown or reset state.
Calling wx_update_stats() from the device disable path therefore becomes
redundant.
Remove wx_update_stats() calls from ngbe_disable_device() and
txgbe_disable_device().
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260525100543.27140-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace various netif_running() checks with an explicit WX_STATE_DOWN
state bit to track whether the device datapath and interrupt handling
are operational.
The previous logic relied on netif_running() to gate interrupt
reenablement, queue wakeups, statistics updates, and service task
execution. However, netif_running() only reflects the administrative
state of the netdevice and does not fully serialize against teardown
and reset paths. During device shutdown and reset flows, asynchronous
contexts such as interrupt handlers, NAPI poll, and service work could
still observe netif_running() as true while device resources were
already being disabled or freed.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260525100543.27140-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make
the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add the missing 'struct' keyword in the kernel-doc comment for
realtek_gpio_ctrl, and document the @cpumask_base and @cpu_irq_maskable
members that were added later but never described. Also fix the
mismatch between documented @imr_line_pos and the actual member name
line_imr_pos.
Fixes W=1 warning:
Warning: drivers/gpio/gpio-realtek-otto.c:66 cannot understand function prototype: 'struct realtek_gpio_ctrl'
Assisted-by: Opencode:BigPickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260528041031.728557-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The most accepted style for the array terminator is to use a single
space between the curly braces and no trailing comma.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/985c86e80f35a944a4712f0c2ac8dd795868cdfb.1779893336.git.u.kleine-koenig@baylibre.com
[Bartosz: Fixed Uwe's S-B]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous unit.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/b8f7581e9311d5579447304ac4f2d557b29e4f9d.1779893336.git.u.kleine-koenig@baylibre.com
[Bartosz: Rebased on top of current linux-next where one of the drivers
no longer exists.]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
