| Age | Commit message (Collapse) | Author |
|---|
|
Libie will now support control queue setup and configuration APIs. These
are mainly used for mailbox communication between drivers and control
plane.
Make use of the libeth_rx page pool support for managing controlq buffers.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Phani R Burra <phani.r.burra@intel.com>
Co-developed-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Victor Raj <victor.raj@intel.com>
Co-developed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Control queues can utilize libeth_rx fill queues, despite working outside
of NAPI context. The only problem is standard fill queues requiring NAPI
that provides them with the device pointer.
Introduce a way to provide the device directly without using NAPI.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf and ixd drivers serve different PCI functions on the same device,
therefore their PCI configuration flow is very similar.
Add support functions for idpf and ixd to configure PCI functionality and
access MMIO space. Add a mapping list which can be traversed by a driver,
e.g. to pass certain I/O mappings to the auxbus devices. Such list is also
traversed by the libie_pci_get_mmio_addr() helper, which allows for easier
memory access.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Phani R Burra <phani.r.burra@intel.com>
Co-developed-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Victor Raj <victor.raj@intel.com>
Co-developed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
virtchnl2 headers will be used by both idpf and ixd drivers, so they have
to be moved to an include directory. On top of that, it would be useful to
place all iavf headers together with other intel networking headers.
Move abovementioned intel header files into 'include/linux/net/intel'.
While at it, remove the self-include from iavf_types.h.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Victor Raj <victor.raj@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce a constant for placeholder value and update the kerneldoc for
pci_create_slot() to reference PCI_SLOT_PLACEHOLDER instead of -1
throughout. No functional change.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://patch.msgid.link/20260805165518.794-2-alifm@linux.ibm.com
|
|
Some platforms require selectively disabling specific ASPM states on a
given PCIe link to avoid link instability or functional failures caused by
board-level connectivity constraints such as PCB routing, connectors,
slots, or external cabling.
Devicetree supports disabling ASPM L0s, L1, and L1 PM Substates via the
'aspm-no-l0s', 'aspm-no-l1' [1], and 'aspm-no-l1ss' [2] properties.
However, the ASPM driver does not currently honor these properties when
initializing the default link state.
When firmware enables L1 PM Substates before the kernel takes over,
masking aspm_support alone is insufficient to disable them in hardware.
pcie_config_aspm_link() guards L1SS configuration behind a check on
aspm_capable, which is derived from aspm_support. Once aspm_support is
masked, pcie_config_aspm_l1ss() is never called, leaving
firmware-enabled L1SS substates active in hardware.
Fix this by introducing pcie_link_has_aspm_override() to check for DT
override properties on either endpoint of the link. In
pcie_aspm_override_default_link_state(), use it to:
- Mask aspm_support, aspm_default, and aspm_enabled for any disabled
state, so software's view of the link stays in sync with what is
actually programmed in hardware. Leaving aspm_enabled stale would make
pcie_aspm_enabled() and the aspm sysfs attributes report a state as
active even after it has been masked, and could cause
pcie_config_aspm_link()'s "already in requested state" check to skip
reprogramming hardware to match.
- Explicitly call pcie_config_aspm_l1ss(link, 0) before masking
aspm_support when firmware has L1SS active and DT requests disabling L1
or L1SS, since pcie_config_aspm_link() will no longer do so once
aspm_capable is derived from the masked aspm_support.
Move the aspm_default initialization and
pcie_aspm_override_default_link_state() call in pcie_aspm_cap_init() to
before the "Restore L0s/L1" block. pcie_aspm_cap_init() disables L1 in
hardware prior to aspm_l1ss_init() and re-enables it only in the restore
block. Calling pcie_config_aspm_l1ss() while L1 is already disabled
satisfies its precondition ("Caller must disable L1 first"), whereas the
previous placement after the restore violated it.
Since the restore block writes back the parent_lnkctl/child_lnkctl snapshot
taken from hardware before the DT override ran, mask the L0s and L1 enable
bits out of that snapshot for any state the override has just disabled in
aspm_support. Otherwise the restore step would unconditionally reprogram
the link back to firmware's original L0s/L1 configuration, defeating the
Devicetree override it is meant to enforce.
Move pcie_config_aspm_l1ss() earlier in the file so it can be called
from pcie_aspm_override_default_link_state().
Link [1]: https://github.com/devicetree-org/dt-schema/pull/188
Link [2]: https://github.com/devicetree-org/dt-schema/pull/190
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260727-aspm-v6-3-2ebb3ee7ef71@oss.qualcomm.com
|
|
pcie_aspm_cap_init() disables ASPM L0s/L1 before touching L1SS config, then
restores the pre-existing state afterward. Both steps only ever touched
link->downstream, i.e. function 0 of the downstream component, leaving
sibling functions (>0) on a multi-function device untouched.
This means the "disable" step does not actually disable ASPM link-wide on a
multi-function device: a sibling function can still have L1 enabled even
after this step runs. PCIe r7.0, sec 7.5.3.7, recommends programming the
same ASPM Control value for all functions of a multi-function device, and
pcie_config_aspm_link() already loops over every function on the bus for
exactly this reason.
Loop over every function on linkbus->devices for both the disable and
restore steps, keeping the existing sec 7.5.3.7 ordering (disable
downstream functions before upstream, restore upstream before downstream
functions). The masked pcie_capability_clear_and_set_word() accessor from
the previous commit makes this safe: it only ever touches the ASPM Control
bits, so function-specific bits elsewhere in LNKCTL (e.g. Read Completion
Boundary, CLKREQ Enable) on sibling functions are left untouched.
Fixes: 7447990137bf ("PCI/ASPM: Disable L1 before disabling L1 PM Substates")
Closes: https://lore.kernel.org/all/20260721143945.86E7D1F000E9@smtp.kernel.org/
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260727-aspm-v6-2-2ebb3ee7ef71@oss.qualcomm.com
|
|
When dma_request_chan() returns -EPROBE_DEFER, the error path jumps to
disable_pm and calls pm_runtime_disable() even though pm_runtime_enable()
was never called, leaving disable_depth unbalanced and the device
permanently PM-disabled.
Route the defer path through free_dma to skip pm_runtime_disable().
Fixes: 6bfbf4d0aa0c ("spi: img-spfi: Use dma_request_chan() instead dma_request_slave_channel()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260808-spfi-v1-1-6bc4345be430@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Treat a failure from devm_request_irq() as a probe error instead of
continuing without an IRQ after only reporting a warning.
Return the error through the existing error path to ensure the driver
does not continue with an unsuccessfully requested IRQ.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260807102932.45785-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
platform_get_irq_optional() returns a positive IRQ number on success or
a negative error code on failure. For an optional IRQ, -ENXIO indicates
that no IRQ is available, while other errors should be propagated.
Propagate errors such as -EPROBE_DEFER and -EINVAL instead of continuing
probe without the IRQ.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260807102932.45785-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll.
Fixes: 5bc493bf0c37 ("regmap: sdw-mbq: Add support for SDCA deferred controls")
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260811184500.5312-1-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
FAN53555BUC23X has the ID 0 and REV 0xc, starts at 600mV and
increments in 12.5mV steps.
Per the datasheet, the FAN53555BUC23X (23 option) is grouped with
the 00 and 13 options for soft-start timing (t_SS = 300us typ.),
so the existing enable_time = 400 is reused here as well.
This variant is found on the ASUS Tinker Edge R (RK3399Pro) as the
supply regulator for both vdd_gpu and vdd_cpu_b. Verified across
the full GPU OPP table with the userspace devfreq governor.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Link: https://patch.msgid.link/20260812125054.19111-1-arash.golgol@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
It appears that the bcm2712 SoC found in the relatively popular RPi5 has a
broken EL2 virtual timer.
Tthe reason why the timer isn't working is unknown (the timer is ticking,
but the interrupt never fires), and the SoC vendor doesn't communicate on
the reason why this isn't working, leaving users and maintainers in the
dark.
Paper over the issue by detecting the broken HW, falling back to the
physical timer instead, and let the user know about it. Also taint the
kernel as the machine is definitely not compliant with the spec, and it's
unknown what else is wrong with it.
Reported-by: John <therealgraysky@proton.me>
Reported-by: Daniel Drake <dan@reactivated.net>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Gary Guo <gary@garyguo.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260710080958.491620-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor core fixes: one for power management issues in error
handling and the other to fix a deadlock in door locking of SCSI
devices with removable media; and a minor bug fix for the debug
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Negate wrapped memcmp() result
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi: core: pair EH runtime PM get and put
|
|
If a valid signature is seen at the default offset, use the default
size/offset for discovery.
Fixes: 01bdc7e219c4 ("drm/amdgpu: New interface to get IP discovery binary v3")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5447
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 46a0df99a0b2fa2fa61d864b04b6a5d5fe748779)
Cc: stable@vger.kernel.org
|
|
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5)
Cc: stable@vger.kernel.org
|
|
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522d1 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2417f9fd7049d5a8d87eefd82fd6e36ba1ff7b6)
Cc: stable@vger.kernel.org
|
|
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4ba ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 14c8726b79d19934d6eb6d35c612e3f7204af2c6)
Cc: stable@vger.kernel.org
|
|
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b906e1dc7e3c9ff9f7940f6828b367a6a9ec73c)
Cc: stable@vger.kernel.org
|
|
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9eadc7 ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8897ea8c761b856f02061848a7908040a1fe5e68)
Cc: stable@vger.kernel.org
|
|
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 37519d007e4261febbcf35b3045f8344f3145497)
Cc: stable@vger.kernel.org
|
|
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304)
Cc: stable@vger.kernel.org
|
|
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856)
Cc: stable@vger.kernel.org
|
|
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10)
Cc: stable@vger.kernel.org
|
|
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876e704fff707b18c40dbd383aea4a1c9)
Cc: stable@vger.kernel.org
|
|
radeon_driver_load_kms() calls pm_runtime_use_autosuspend() for PX
devices, but radeon_driver_unload_kms() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
unload path.
This issue was found by manual code inspection.
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0fdc1ff82ea14844c22795e9e0813c3ca03235e1)
Cc: stable@vger.kernel.org
|
|
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 54a118f1d7e184fcbb18f83889f48f17a767878a)
Cc: stable@vger.kernel.org
|
|
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff10 ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39)
Cc: stable@vger.kernel.org
|
|
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080)
Cc: stable@vger.kernel.org
|
|
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82)
|
|
Inside an FPU compilation unit DC_FP_START() and DC_FP_END() are defined
as BUILD_BUG(), so using them there fails the build. That was done on
purpose by
commit a574f53ed52e ("drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units").
DC_RUN_WITH_PREEMPTION_ENABLED() was added later by
commit 3539437f354b ("drm/amd/display: Move FPU Guards From DML To DC - Part 1")
and defined as a plain pass-through in that same branch instead. A wrap
placed inside an FPU compilation unit therefore compiles cleanly, reads
as correct during review, and does nothing at all.
This is not hypothetical. While chasing a "scheduling while atomic"
splat in dc_create_plane_state() on PREEMPT_RT, an attempt to place the
guard further up the call chain, in dml21_add_phantom_plane() in
dc/dml2_0/dml21/dml21_utils.c, had no effect for exactly this reason:
dc/dml2_0/Makefile applies CC_FLAGS_FPU to every object under that
directory, and the top level Makefile adds -D_LINUX_FPU_COMPILATION_UNIT
to CC_FLAGS_FPU.
Define the macro as BUILD_BUG() there as well, so that the mistake is a
compile error rather than a guard that silently does nothing. The code
argument is kept in the expansion so the BUILD_BUG() failure is not
accompanied by set-but-unused diagnostics for variables assigned inside
it.
No current user is affected. dc/core/dc_stream.c and
dc/resource/dcn32/dcn32_resource.c are outside the dml directories, and
dc/dml2_0/dml2_wrapper.c and dc/dml2_0/dml21/dml21_wrapper.c are built
without the FPU flags because dc/dml2_0/Makefile replaces their CFLAGS
with CC_FLAGS_NO_FPU and removes CC_FLAGS_FPU.
Link: https://lore.kernel.org/all/1ead313022bc62dce1f42af9f855727eb9074443.camel@web.de/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu15/smu_v15_0_8_ppt.c:1964
smu_v15_0_8_set_performance_level() error: uninitialized symbol 'ret'.
In this line there is an "if (ret)" condition where "ret" is either
zero or uninitialized. Initialize "ret" at the start of the function to
avoid a potential uninitialized variable bug. But also delete the
condition since it is never true.
Fixes: 422b399b09c7 ("drm/amd/pm: Add od_edit_dpm_table support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A GPU reset can race with BO teardown after the BO's GTT resource has
been marked for deletion but before its drm_mm node is removed. In this
window, amdgpu_gtt_mgr_recover() can treat the node as a live BO and try
to restore its GART mapping while its TT backing is being destroyed.
Recolor the GTT node from amdgpu_bo_delete_mem_notify() so that recovery
skips it, reusing the existing color for ranges without a BO. The range
stays allocated until the resource is freed.
This prevents reset recovery from accessing a BO whose backing storage
is no longer valid.
v2: refine commit message. (David Francis)
v3: Remove new BO color. (Christian)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A PRT/sparse mapping has no backing BO, so its bo_va->base.bo is NULL.
amdgpu_vm_bo_base_init() deliberately keeps such a bo_va off the vm_bo
state lists, but the tail of amdgpu_vm_bo_update() unconditionally called
amdgpu_vm_bo_idle() for the !always_valid case, putting the NULL-bo PRT
bo_va onto the individual.idle list.
On a GPU reset amdgpu_vm_bo_reset_state_machine() moves individual.idle
to individual.needs_update with moved=true, and amdgpu_vm_handle_moved()
then dereferences bo_va->base.bo to read its reservation object,
crashing on the NULL bo (e.g. the userq eviction restore worker running
during a reset while a user queue is torn down):
BUG: kernel NULL pointer dereference, address: 0000000000000158
RIP: 0010:amdgpu_vm_handle_moved+0x17a/0x200 [amdgpu]
Call Trace:
amdgpu_userq_vm_validate_and_restore_queue+0x2ce/0x920 [amdgpu]
amdgpu_userq_restore_worker+0xce/0x210 [amdgpu]
Skip amdgpu_vm_bo_idle() when bo is NULL so a PRT mapping never lands on
a state list in the first place, and refresh the PRT page tables
explicitly in the userq restore path (as the CS path already does) so
sparse mappings survive a VRAM-lost reset. Because the PRT bo_va is off
the state lists, its PTE update fence lands in prt_va->last_pt_update
rather than vm->last_update, so wait on it explicitly before restarting
the queues (mirroring how the CS path syncs that fence).
v2:
- keep the PRT bo_va off the vm_bo state lists instead of NULL-guarding
bo inside amdgpu_vm_handle_moved(); a PRT mapping should never be on
the moved list in the first place (Christian)
v3:
- the PRT PTEs are updated separately, so their fence is in
prt_va->last_pt_update, not vm->last_update; wait on it in the userq
restore path before restarting queues, otherwise the queues could
restart before the sparse PTEs are written (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522d1 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4ba ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9eadc7 ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
radeon_driver_load_kms() calls pm_runtime_use_autosuspend() for PX
devices, but radeon_driver_unload_kms() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
unload path.
This issue was found by manual code inspection.
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we end up emitting a VM fence keep GDS and SPM
associated with that fence. If not, emit them as
part of the IB fence.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During compilation with allmodconfig with KASAN, there appears a Werror:
dml2_core_dcn5_funcs_mode_programming.c:11:13: error: stack frame size
(2400) exceeds limit (2048) in 'dcn5_mode_programming'
[-Werror,-Wframe-larger-than]
The dcn5/dcn6 dml2_core_*_funcs_mode_{programming,support} files were
split out of dml2_core_dcn4_calcs.o, which carries a relaxed
-Wframe-larger-than limit via $(frame_warn_flag) (2056 normally, or
4096 for clang + KASAN/KCSAN + COMPILE_TEST). The split-out files were
never added to the per-file CFLAGS override list, so they inherited the
strict global default of 2048. This is why these files trip the frame
size warning under KASAN while the larger dml2_core_dcn4_calcs.o does
not.
[How]
Apply the same $(frame_warn_flag) and CFLAGS_REMOVE handling used for
dml2_core_dcn4_calcs.o to the split-out files:
- dml2_core_dcn5_funcs_mode_programming.o
- dml2_core_dcn5_funcs_mode_support.o
- dml2_core_dcn6_funcs_mode_programming.o
- dml2_core_dcn6_funcs_mode_support.o
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES RS64 local memory process/gang context index may be updated,
saved, or restored improperly during queue eviction and restore cycles.
Enabling RS64 memory for MES process/gang context loading introduces
two known issues:
1. Performance regression on userq due to improper context index
handling during RS64 memory access.
2. KFDIPCTest.BasicTest failure on Navi31/32/33: the IPC buffer
GPU VA mapping is not correctly reflected in the restored RS64
process context, causing GPU page faults on the IPC shared
buffer address, which eventually leads to MES firmware becoming
unresponsive and requiring a full GPU reset to recover.
Temporarily disable MES RS64 process/gang context loading until both
issues are resolved.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
