| Age | Commit message (Collapse) | Author |
|---|
|
Fixes a "duplicate tag error for tag 0" firmware crash during controller
reset while setting up a queue on Apple A11 / T8015 caused by stale
entries in the submission queue due to an invalid sq_tail offset after
reset.
Fixes: 04d8ecf37b5e ("nvme: apple: Add Apple A11 support")
Cc: stable@vger.kernel.org
Suggested-by: Yuriy Havrylyuk <yhavry@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/netdev/aaVgJ16edTfQkYbx@v4bel/
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 80747caef33d ("ovpn: introduce the ovpn_peer object")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data()
under rcu_read_lock(), takes a reference on sock->peer, caches the peer
pointer in a local, and drops the read lock. It then passes sock->peer
(rather than the cached local) to ovpn_peer_del(), re-dereferencing the
ovpn_socket after the RCU read section has ended.
Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use
after unlock" pattern but is protected by lock_sock() held across the
function, ovpn_tcp_close() runs without the socket lock: inet_release()
invokes sk_prot->close() without taking lock_sock first.
ovpn_socket_release() can therefore complete its kref_put -> detach ->
synchronize_rcu -> kfree(sock) sequence concurrently, in the window
after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences
sock->peer. The synchronize_rcu() in ovpn_socket_release() protects
readers that use the dereferenced pointer inside the RCU read section,
not those that escape the pointer to a local and use it afterwards.
A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp -
don't deref NULL sk_socket member after tcp_close()"): trigger a peer
removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same
moment userspace closes the TCP fd. That commit fixed the detach-side
of the same race window; this one fixes the close-side at a different
victim.
Tighten the entry block to read sock->peer exactly once into the cached
peer local, and route all subsequent uses (the hold check, the
ovpn_peer_del() call, and the prot->close() invocation) through that
local. sock->peer is only ever written once in ovpn_socket_new() under
lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket,
and is never reassigned afterwards - but the previous multi-read pattern
made that invariant implicit rather than explicit. The same multi-read
shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(),
ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned
up via a dedicated helper in a follow-up net-next series.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Since the timer uses jiffies as its unit rather than ms, the timeout value
must be converted from ms to jiffies when configuring the timer. Otherwise,
the intended 8s timeout is incorrectly set to approximately 33s.
To improve readability, embed msecs_to_jiffies() directly in the macro
definitions and drop the _MS suffix from macros that now yield jiffies
values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT,
CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT.
IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are
intentionally left unchanged. Their values are stored in the struct fields
wake_retrans and tx_idle_delay, which hold ms values at runtime and can be
modified via debugfs. The msecs_to_jiffies() conversion happens at each
call site against the field value, so it cannot be embedded in the macro.
Wake timer depends on commit c347ca17d62a
Cc: stable@vger.kernel.org
Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MT7925 (USB ID 0e8d:e025) on fw version 20260106153314 sends WMT
FUNC_CTRL events that are missing the status field.
Prior to commit 006b9943b982 ("Bluetooth: btmtk: validate WMT event SKB
length before struct access") the status was read from out-of-bounds of
SKB data, which usually would result to success with
BTMTK_WMT_ON_UNDONE, although I don't know the intent here. The bounds
check added in that commit returns with error instead, producing
"Bluetooth: hci0: Failed to send wmt func ctrl (-22)" and makes the
device unusable.
Fix the regression by interpreting too short packet as status
BTMTK_WMT_ON_UNDONE, which makes the device work normally again.
Fixes: 634a4408c061 ("Bluetooth: btmtk: validate WMT event SKB length before struct access")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> # MT7922 (0489:e0e2)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There are some performance issues being identified by dynamic EPP
and we don't want to have distributions turning it on by default
exposing them to users at this time.
Drop the kconfig option, and require an explicit opt in from kernel
command line or runtime sysfs option to turn it on.
Reported-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Closes: https://lore.kernel.org/linux-pm/14a87c99-785c-4b16-bfce-35ecbf053448@freenet.de/
Reported-by: Stuart Meckle <stuartmeckle@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221473
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260512221947.1652988-1-mario.limonciello@amd.com
(fix sysfs file path)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up.
Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking")
Cc: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.15+
Assisted-by: GitHub_Copilot:claude-opus-4.6
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260511162443.24352-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The capital letters are for symbols and N in 'default N' will be evaluated as
another, nonexistent, Kconfig symbol, and not as the 'no' it should be. More
importantly, 'n' *is* the default already. Hence just drop the malformed line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260513205021.368190-1-andriy.shevchenko@linux.intel.com
|
|
SCPI clock providers are registered for each child node in
scpi_clk_add(), but scpi_clocks_remove() unregisters the parent node on
each iteration.
of_clk_del_provider() matches providers by the node used at registration
time, so passing the parent node leaves the child providers registered.
This leaks the provider allocations and the node references held by the
clock provider core.
Pass the child node to of_clk_del_provider() so the remove path matches
the probe path.
Fixes: cd52c2a4b5c4 ("clk: add support for clocks provided by SCP(System Control Processor)")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260513090900.5323-1-sozdayvek@gmail.com
(sudeep.holla: Updated commit title and message a bit)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
dmem_cgroup_try_charge() returns -EAGAIN when the cgroup limit is
hit and the charge fails. TTM has no concept of -EAGAIN from resource
allocation; -ENOSPC is the canonical error meaning "no space, try
eviction". Convert at the source in ttm_resource_alloc() so no caller
needs to handle an unexpected error code, and clean up the now-redundant
-EAGAIN check in ttm_bo_alloc_resource().
Without this, -EAGAIN escaping ttm_resource_alloc() during an eviction
walk causes the walk to terminate early instead of continuing to the
next candidate.
Cc: Friedrich Vock <friedrich.vock@gmx.de>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.14+
Fixes: 2b624a2c1865 ("drm/ttm: Handle cgroup based eviction in TTM")
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhrost.se>
Link: https://patch.msgid.link/20260508160920.230339-1-thomas.hellstrom@linux.intel.com
|
|
__destroy_component_cfg() is called to free the configuration array.
It uses the embedded 'garbage' structure, which means the array has
to be allocated.
If __destroy_component_cfg() is called from mpam_disable() before the
configuration was ever allocated, then a NULL pointer is dereferenced.
Check for this case and return early if the configuration is not
allocated.
__destroy_component_cfg() also frees the mbwu_state as this is allocated
by __allocate_component_cfg(). As the mbwu_state is allocated after
comp->cfg is set, and is also under mpam_list_lock, only the first
pointer needs checking.
Fixes: 3bd04fe7d807 ("arm_mpam: Extend reset logic to allow devices to be reset any time")
Cc: <stable@vger.kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
mpam_assert_partid_sizes_fixed() is used to document that the caller
doesn't expect the discovered PARTID size to change while it is walking
a list sized by PARTID. Typically the MSC state is not written to until
all the MSC have been discovered and this value is set.
However, if discovering the MSC fails and schedules mpam_disable(),
then the MSC state is written to reset it. In this case the
discovered PARTID size may be become smaller - but only PARTID 0
will be used once resctrl_exit() has been called.
Skip the WARN_ON_ONCE() if mpam_disable_reason has been set.
Fixes: 3bd04fe7d807 ("arm_mpam: Extend reset logic to allow devices to be reset any time")
Cc: <stable@vger.kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
mpam_ris_hw_probe_csu_nrdy() sets and clears MSMON_CSU.NRDY and checks
whether it's configuration sticks. However, hardware isn't given a chance
to disagree. Based on rule LRTGP, in MPAM specification IHI0099 version
B.b, the hardware will set NRDY if it needs time to establish a count after
a configuration change.
Enable the monitor so that NRDY becomes relevant and change the
configuration after clearing NRDY to try and coax the hardware into setting
it.
Fixes: 8c90dc68a5de ("arm_mpam: Probe the hardware features resctrl supports")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rule ZTXDS of the MPAM specification, IHI009 version B.b, states: "If a
monitor does not support automatic updates of NRDY, software can use that
bit for any purpose."
As software is not reliably informed whether or not the monitor supports
automatic updates of NRDY always assume that hardware may manage NRDY but
don't rely on it. When NRDY is truly untouched by hardware then, as it is
written to 0 on configuration, it will always read 0.
At probe it's checked if MSMON_CSU.NRDY and MSMON_MBWU.NRDY are hardware
managed but not MSMON_MBWU_L.NDRY. Specialize the checking for hardware
managed NRDY to CSU counters as this is the only case where hardware
management makes sense. Continue to inform the user if MSMON_CSU.NRDY
appears to be hardware managed but the firmware doesn't provide the
associated time limit for the automatic clearing of NRDY. Remove the NRDY
feature flags as they are now unused.
Fixes: 8c90dc68a5de ("arm_mpam: Probe the hardware features resctrl supports")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In _mpam_ris_hw_probe_hw_nrdy() a new register value to select the first
monitor and relevant RIS is prepared in mon_sel. However, it is written to
the monitor value register, e.g. MSMON_CSU, rather than MSMON_CFG_MON_SEL.
As MSMON_CFG_MON_SEL is a 32 bit register update the type of mon_sel to
u32. Write mon_sel to the intended register, MSMON_CFG_MON_SEL.
Fixes: 8c90dc68a5de ("arm_mpam: Probe the hardware features resctrl supports")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The Lenovo ThinkPad E490 (PNP ID: LEN2058) has a Synaptics TM3471-020
touchpad that supports SMBus/RMI4 mode but is not listed in
smbus_pnp_ids[]. Without this entry, RMI4 over SMBus is not enabled
by default, and the touchpad falls back to PS/2 mode.
Adding LEN2058 to the passlist enables automatic RMI4 detection without
requiring the psmouse.synaptics_intertouch parameter, and matches
the behavior of similar ThinkPad models already in the list
(E480/LEN2054, E580/LEN2055).
Tested on ThinkPad E490 with kernel 7.0.5-zen1 and Arch Linux.
RMI4 over SMBus is confirmed working without any kernel parameters.
Signed-off-by: Nicolás Bazaes <contacto@bazaes.cl>
Assisted-by: Claude:claude-sonnet-4-6
Link: https://patch.msgid.link/20260514013552.14234-1-contacto@bazaes.cl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Increase the RQT uniform spread factor from 2 to 4 so that each channel
gets more indirection table entries and traffic is spread more evenly.
For num_channels > 64 imbalance drops from up to ~50% to up to ~25%.
For 64 or fewer channels the 256 entry minimum already provides at least
4x coverage and the table size is unchanged by this commit.
This satisfies the minimum 4x coverage requirement validated by the
generic RSS selftest commit 9e3d4dae9832 ("selftests: drv-net: rss:
validate min RSS table size").
The 4x spread factor is best-effort and the table size is always capped by
the device's log_max_rqt_size capability.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_ethtool_set_channels() rejected channel count changes that
required a different RQT size when the default context indirection
table was user-configured. This restriction was introduced by
commit ee3572409f74 ("net/mlx5e: RSS, Block changing channels number
when RXFH is configured").
Lift the restriction. Validate the resize upfront with
ethtool_rxfh_indir_can_resize(), then fold or unfold the table
in-place via ethtool_rxfh_indir_resize() inside state_lock, before
mlx5e_safe_switch_params(), so the preactivate callback sees the
correct table content when it programs the HW.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the channel count changes and the RQT size changes with it, a
problem arise for non-default RSS contexts. The driver-side indirection
table grows actual_table_size without filling the new entries; stale
entries from a prior larger configuration may be re-exposed, causing
mlx5e_calc_indir_rqns() to WARN on an out-of-range index.
Replace mlx5e_rss_params_indir_modify_actual_size() with
mlx5e_rss_ctx_resize(), which fills new entries by replicating
the existing pattern, matching what ethtool_rxfh_ctxs_resize() does
for the same case. And restrict the loop to non-default contexts.
Call ethtool_rxfh_ctxs_can_resize() before acquiring state_lock to
validate that all non-default contexts can be resized, and
ethtool_rxfh_ctxs_resize() after releasing it to fold or unfold their
indirection tables. Both functions acquire rss_lock internally and
cannot be called under state_lock. RTNL, held by all set_channels
callers, serialises context creation and deletion making the pre-lock
check safe.
Guard both ethtool calls on mlx5e_rx_res_rss_cnt() > 1: skip the
validation and resize when no non-default contexts exist. This
naturally covers representors and IPoIB, which share
mlx5e_ethtool_set_channels() but cannot have non-default RSS contexts.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set rxfh_indir_space to the maximum indirection table size the driver
can support: the next power of two above MLX5E_MAX_NUM_CHANNELS times
MLX5E_UNIFORM_SPREAD_RQT_FACTOR.
Without this, ethtool_rxfh_ctxs_can_resize() returns -EINVAL, blocking
non-default RSS contexts from tracking indirection table size changes
when the channel count changes.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_ethtool_set_channels() and mlx5e_rxfh_hfunc_check() rejected
channel counts that would produce an indirection table larger than 256
entries when the XOR8 hash function was active. This check was
introduced in commit 49e6c9387051 ("net/mlx5e: RSS, Block XOR hash
with over 128 channels").
XOR8 yields an 8-bit hash, so in practice only up to 256 entries in the
indirection table can be reached due to limited entropy. However, this
does not provide a strong justification for prohibiting larger
indirection tables. Remove the limitation.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.1-2026-05-13:
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260513224053.40670-1-alexander.deucher@amd.com
|
|
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-4-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
vunmap+0x4c/0x70
__iommu_dma_free+0xd0/0x138
dma_free_attrs+0xf4/0x100
sec_aead_exit+0x64/0xb8 [hisi_sec2]
crypto_destroy_tfm+0x98/0x110
free_rxsa+0x28/0x50 [macsec]
rcu_do_batch+0x184/0x460
rcu_core+0xf4/0x1f8
handle_softirqs+0x118/0x330
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-3-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-2-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
find_skb() is the netconsole-specific entry into the netpoll skb
pool: every other netpoll consumer (bonding, team, vlan, bridge,
macvlan, dsa) builds its own sk_buff and never touches the pool.
With netpoll_send_udp() (its only caller) now living in netconsole,
find_skb() can join it.
Move find_skb() into drivers/net/netconsole.c as a file-static
helper, drop EXPORT_SYMBOL_GPL(find_skb) and remove its prototype
from include/linux/netpoll.h. find_skb() drains TX completions via
netpoll_zap_completion_queue(), which is already exported in the
NETDEV_INTERNAL namespace, so netconsole picks up
MODULE_IMPORT_NS("NETDEV_INTERNAL") to consume it.
The skb pool's lifecycle (np->skb_pool, np->refill_wq, refill_skbs(),
refill_skbs_work_handler(), skb_pool_flush()) stays in netpoll: it
is initialised in __netpoll_setup() and torn down in
__netpoll_cleanup(), both of which remain netpoll's responsibility.
The refill work queued via schedule_work(&np->refill_wq) from the
moved find_skb() runs refill_skbs_work_handler() in netpoll without
any further plumbing.
This is pure code motion: the function body is unchanged and its
sole caller (netpoll_send_udp(), already moved by an earlier patch)
keeps invoking it the same way. Pre-existing concerns about
find_skb() running from NMI/printk context (zap_completion_queue()
re-entry, skb_pool spinlocks, GFP_ATOMIC allocation, fallback skb
sizing vs. MAX_SKB_SIZE, PREEMPT_RT semantics of __kfree_skb()) are
inherited as-is and are not addressed here; they predate this
series and are out of scope. Fixing them is left for follow-up
work.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-9-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netpoll_udp_checksum() computes the UDP checksum for netconsole's
packets. Move it into drivers/net/netconsole.c as a file-static
helper; drop its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
This was the last csum_ipv6_magic() consumer in net/core/netpoll.c,
so drop the now-stale <net/ip6_checksum.h> include there. Pull it
into netconsole.c so the moved code keeps building.
It was also the last udp_hdr() consumer in net/core/netpoll.c. The
file no longer needs anything from <net/udp.h> (the UDP socket-layer
helpers); MAX_SKB_SIZE only needs struct udphdr, which is provided
by the lighter <linux/udp.h>. Swap the include accordingly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-7-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
push_udp() builds the UDP header (and triggers the checksum) for
netconsole's UDP packets. Move it into drivers/net/netconsole.c as
a file-static helper; drop its EXPORT_SYMBOL_GPL and remove the
prototype from include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-6-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
push_eth() builds the Ethernet header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-5-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
push_ipv4() builds the IPv4 header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
put_unaligned() is no longer used in net/core/netpoll.c, so drop
the now-stale <linux/unaligned.h> include from there. Pull it into
netconsole.c so the moved code keeps building.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-4-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
push_ipv6() builds the IPv6 header for netconsole's UDP packets.
Its only caller, netpoll_send_udp(), now lives in netconsole, so
the helper can move there as a file-static function. Drop its
EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-3-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move netpoll_send_udp() from net/core/netpoll.c into
drivers/net/netconsole.c as a static helper, drop EXPORT_SYMBOL(),
and remove the prototype from include/linux/netpoll.h.
netconsole was the only in-tree caller of this entry point. Every
other netpoll consumer (bonding, team, vlan, bridge, macvlan, dsa)
already builds its own sk_buff and hands it to netpoll_send_skb(),
so the netpoll send-side interface is now skb-only.
The helpers it depends on (find_skb(), push_ipv6(), push_ipv4(),
push_udp(), push_eth(), netpoll_udp_checksum()) were exposed in
the previous patches and stay in net/core/netpoll.c for now.
Subsequent patches move each of them into netconsole one at a time
and drop the corresponding EXPORT_SYMBOL_GPL.
Pull <linux/ip.h>, <linux/ipv6.h> and <linux/udp.h> into netconsole.c
so the moved code can name the header structures.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-2-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
simple_strtoul() is deprecated as it has no error checking. Replace it
with kstrtouint() which returns an error code on invalid input, and add
appropriate error handling.
Also add a NULL check before parsing flags, since strsep() can set id
to NULL if the input has fewer tokens than expected.
Preserve the original behavior for a trailing colon by checking *id
before parsing flags, so an empty string results in flags = 0 rather
than an error.
Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com>
Link: https://patch.msgid.link/20260509095518.2640-1-sajal2005gupta@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipvlan_process_multicast() runs from process context, there is no
risk of stack overflow if we call netif_receive_skb() instead
of netif_rx().
This avoids some overhead adding/removing skbs to/from a per-cpu
backlog and raising/processing NET_RX softirqs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260512042019.3300975-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit prevents tail-drop when a qdisc is present and the ptr_ring
becomes full. Once the ring reaches capacity after a produce attempt,
the netdev queue is stopped instead of dropping subsequent packets.
If no qdisc is present, the previous tail-drop behavior is preserved.
If producing an entry fails anyway due to a race, tun_net_xmit() drops
the packet. Such races are expected because LLTX is enabled and the
transmit path operates without the usual locking.
The __tun_wake_queue() function of the consumer races with the producer
for waking/stopping the netdev queue, which could result in a stalled
queue. Therefore, an smp_mb__after_atomic() is introduced that pairs
with the smp_mb() of the consumer. It follows the principle of store
buffering described in tools/memory-model/Documentation/recipes.txt:
- The producer in tun_net_xmit() first sets __QUEUE_STATE_DRV_XOFF,
followed by an smp_mb__after_atomic() (= smp_mb()), and then reads the
ring with __ptr_ring_check_produce().
- The consumer in __tun_wake_queue() first writes zero to the ring in
__ptr_ring_consume(), followed by an smp_mb(), and then reads the queue
status with netif_tx_queue_stopped().
=> Following the aforementioned principle, it is impossible for the
producer to see a full ring (and therefore not wake the queue on the
re-check) while the consumer simultaneously fails to see a stopped
queue (and therefore also does not wake it).
Benchmarks:
The benchmarks show a slight regression in raw transmission performance
when using two sending threads. Packet loss also occurs only in the
two-thread sending case; no packet loss was observed with a single
sending thread.
Test setup:
AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU threads;
Average over 50 runs @ 100,000,000 packets. SRSO and spectre v2
mitigations disabled.
Note for tap+vhost-net:
XDP drop program active in VM -> ~2.5x faster; slower for tap due to
more syscalls (high utilization of entry_SYSRETQ_unsafe_stack in perf)
+--------------------------+--------------+----------------+----------+
| 1 thread | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.132 Mpps | 1.123 Mpps | -0.8% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 3.765 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.857 Mpps | 3.901 Mpps | +1.1% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 0.802 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
+--------------------------+--------------+----------------+----------+
| 2 threads | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.115 Mpps | 1.081 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 8.490 Mpps | 391 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.664 Mpps | 3.555 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 5.330 Mpps | 938 pps | |
+------------+-------------+--------------+----------------+----------+
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tun_wake_queue() to tun.c and export it for use by vhost-net. The
function validates that the file belongs to a tun/tap device and that
the tfile exists, dereferences the tun_struct under RCU, and delegates
to __tun_wake_queue().
vhost_net_buf_produce() now calls tun_wake_queue() after a successful
batched consume of the ring to allow the netdev subqueue to be woken up.
The point is to allow the queue to be stopped when it gets full, which
is required for traffic shaping - implemented by the following
"avoid ptr_ring tail-drop when a qdisc is present".
Without the corresponding queue stopping, this patch alone causes no
throughput regression for a tap+vhost-net setup sending to a qemu VM:
3.857 Mpps to 3.891 Mpps.
Details: AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU
threads, XDP drop program active in VM, pktgen sender; Avg over
50 runs @ 100,000,000 packets. SRSO and spectre v2 mitigations disabled.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce tun_ring_consume() that wraps ptr_ring_consume() and calls
__tun_wake_queue(). The latter wakes the stopped netdev subqueue once
half of the ring capacity has been consumed, tracked via the new
cons_cnt field in tun_file. As a safety net, the queue is also woken on
the last consumed entry if it leaves the ring empty. The point is to
allow the queue to be stopped when it gets full, which is required for
traffic shaping - implemented by the following "avoid ptr_ring tail-drop
when a qdisc is present".
Some implementation details:
- tun_ring_recv() replaces ptr_ring_consume() with tun_ring_consume()
to properly wake the queue.
- __tun_detach() locks the tx_ring.consumer_lock to avoid races with
the consumer on the queue_index.
- The ptr_ring_consume() call in tun_queue_purge() is not replaced with
tun_ring_consume(). Instead, within the same tx_ring.consumer_lock
in __tun_detach(), the netdev queue is woken for the ntfile taking
it over, to avoid a possible stall. This does not matter for
tun_detach_all(), as it is called during device teardown and no tfile
takes over any queue.
- Reset cons_cnt in tun_attach() so the half-ring wake threshold is
valid for the new ring size after ptr_ring_resize().
- tun_queue_resize() wakes all queues after resizing with the proper
tx_ring.consumer_lock and resets the cons_cnt to avoid a possible
stale queue.
- The aforementioned upcoming patch explains the pairing of the smp_mb()
of __tun_wake_queue().
Without the corresponding queue stopping, this patch alone causes no
regression for a tap setup sending to a qemu VM: 1.132 Mpps
to 1.134 Mpps.
Details: AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU
threads, pktgen sender; Avg over 50 runs @ 100,000,000 packets;
SRSO and spectre v2 mitigations disabled.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison.
Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com
Fixes: 5033091de814 ("mm/hwpoison: introduce per-memory_block hwpoison counter")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffbee
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
defza: v.1.1.4 Oct 6 2018 Maciej W. Rozycki
tc2: DEC FDDIcontroller 700 or 700-C at 0x18000000, irq 4
tc2: resetting the board...
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.0-dirty #2 VOLUNTARY
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 7070617773203a6d
0000000000000000 9800000002027ba4 0000000000001000 6465746e69617420
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff800ab7c0>] do_idle+0x40/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: OK
tc2: model 700 (DEFZA-AA), MMF PMD, address 08-00-2b-xx-xx-xx
tc2: ROM rev. 1.0, firmware rev. 1.2, RMC rev. A, SMT ver. 1
tc2: link unavailable
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 7.0.0-dirty #2 VOLUNTARY
Tainted: [W]=WARN
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 0000000000000000
0000000000000000 9800000002027ba4 0000000000001000 0000000000000000
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff806de8a4>] arch_local_irq_disable+0x4/0x28
[<ffffffff800ab7d0>] do_idle+0x50/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: registered as fddi0
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9834 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a VM, Linux panic information (reason for the panic, stack trace,
etc.) may be written to a serial console and/or a virtual frame buffer
for a graphics console. The latter may need to be flushed back to the
host hypervisor for display.
The current Hyper-V DRM driver for the frame buffer does the flushing
*after* the VMBus connection has been unloaded, such that panic messages
are not displayed on the graphics console. A user with a Hyper-V graphics
console is left with just a hung empty screen after a panic. The enhanced
control that DRM provides over the panic display in the graphics console
is similarly non-functional.
Commit 3671f3777758 ("drm/hyperv: Add support for drm_panic") added
the Hyper-V DRM driver support to flush the virtual frame buffer. It
provided necessary functionality but did not handle the sequencing
problem with VMBus unload.
Fix the full problem by using VMBus functions to suppress the VMBus
unload that is normally done by the VMBus driver in the panic path. Then
after the frame buffer has been flushed, do the VMBus unload so that a
kdump kernel can start cleanly. As expected, CONFIG_DRM_PANIC must be
selected for these changes to have effect. As a side benefit, the
enhanced features of the DRM panic path are also functional.
Fixes: 3671f3777758 ("drm/hyperv: Add support for drm_panic")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Currently, VMBus code initiates a VMBus unload in the panic path so
that if a kdump kernel is loaded, it can start fresh in setting up its
own VMBus connection. However, a driver for the VMBus virtual frame
buffer may need to flush dirty portions of the frame buffer back to
the Hyper-V host so that panic information is visible in the graphics
console. To support such flushing, provide exported functions for the
frame buffer driver to specify that the VMBus unload should not be
done by the VMBus driver, and to initiate the VMBus unload itself.
Together these allow a frame buffer driver to delay the VMBus unload
until after it has completed the flush.
Ideally, the VMBus driver could use its own panic-path callback to do
the unload after all frame buffer drivers have finished. But DRM frame
buffer drivers use the kmsg dump callback, and there are no callbacks
after that in the panic path. Hence this somewhat messy approach to
properly sequencing the frame buffer flush and the VMBus unload.
Fixes: 3671f3777758 ("drm/hyperv: Add support for drm_panic")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Live-tree reconfiguration properties also carry raw values plus explicit
lengths. `of_reconfig_get_state_change()` currently treats `status`
property values as NUL-terminated strings and feeds them straight into
`strcmp()`.
Factor the `"okay"` / `"ok"` check out into a helper that first verifies
that the property contains a bounded C string within `prop->length`.
Malformed `status` updates should be treated as not enabling the node.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-2-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
`populate_properties()` stores live-tree property values as raw byte
sequences plus a separate `length`. They are not globally guaranteed to
be NUL-terminated.
`of_prop_next_string()` iterates string-list properties by walking raw
bytes, `__of_node_is_type()` checks `device_type`,
`__of_device_is_status()` checks `status`, and
`of_alias_from_compatible()` reads the first `compatible` entry. These
paths must validate that the relevant string fits within the property
bounds before they hand it to C string helpers.
Validate these live-tree string properties within their declared bounds.
In particular, make `of_prop_next_string()` reject malformed entries
before returning them, keep the `device_type` check inside the existing
no-lock helper path, and add unit coverage for malformed first and
trailing string-list entries.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-1-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
tegra_i2c_mutex_unlock() returning an error that overwrites the transfer
result causes silent loss of I2C transfer errors. If the transfer failed
but the unlock succeeded, the error was lost and the function incorrectly
reported success.
Rather than propagating the unlock error (which is not actionable by the
caller - the I2C message may have been sent regardless), convert the
function to return void and WARN on the unexpected condition. If the
unlock fails, subsequent lock attempts will fail anyway, making the error
visible on the next transfer.
Fixes: 6077cfd716fb ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-3-sauravsc@amazon.com
|
|
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure.
Fixes: 6077cfd716fb ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-2-sauravsc@amazon.com
|
|
If we pass a software node to a newly created device using struct
platform_device_info, it will not be removed when the device is
released. This may happen when a module creating the device is removed
or on failure in platform_device_add().
When we try to reuse that software node in a subsequent call to
platform_device_register_full(), it will fail with -EBUSY.
Provide a wrapper around the existing platform_device_release() that
additionally calls device_remove_software_node() and use it to replace
the former if we end up adding a software node.
While at it: check all three possible situations in which two software
nodes for a single platform device can be created/assigned in
platform_device_register_full() and bail-out early.
Fixes: 0fc434bc2c45 ("driver core: platform: allow attaching software nodes when creating devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-swnode-remove-on-dev-unreg-v6-1-f9c58939df27@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
|
