| Age | Commit message (Collapse) | Author |
|---|
|
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 37519d007e4261febbcf35b3045f8344f3145497)
Cc: stable@vger.kernel.org
|
|
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304)
Cc: stable@vger.kernel.org
|
|
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856)
Cc: stable@vger.kernel.org
|
|
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10)
Cc: stable@vger.kernel.org
|
|
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876e704fff707b18c40dbd383aea4a1c9)
Cc: stable@vger.kernel.org
|
|
radeon_driver_load_kms() calls pm_runtime_use_autosuspend() for PX
devices, but radeon_driver_unload_kms() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
unload path.
This issue was found by manual code inspection.
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0fdc1ff82ea14844c22795e9e0813c3ca03235e1)
Cc: stable@vger.kernel.org
|
|
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 54a118f1d7e184fcbb18f83889f48f17a767878a)
Cc: stable@vger.kernel.org
|
|
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff10 ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39)
Cc: stable@vger.kernel.org
|
|
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080)
Cc: stable@vger.kernel.org
|
|
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82)
|
|
Inside an FPU compilation unit DC_FP_START() and DC_FP_END() are defined
as BUILD_BUG(), so using them there fails the build. That was done on
purpose by
commit a574f53ed52e ("drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units").
DC_RUN_WITH_PREEMPTION_ENABLED() was added later by
commit 3539437f354b ("drm/amd/display: Move FPU Guards From DML To DC - Part 1")
and defined as a plain pass-through in that same branch instead. A wrap
placed inside an FPU compilation unit therefore compiles cleanly, reads
as correct during review, and does nothing at all.
This is not hypothetical. While chasing a "scheduling while atomic"
splat in dc_create_plane_state() on PREEMPT_RT, an attempt to place the
guard further up the call chain, in dml21_add_phantom_plane() in
dc/dml2_0/dml21/dml21_utils.c, had no effect for exactly this reason:
dc/dml2_0/Makefile applies CC_FLAGS_FPU to every object under that
directory, and the top level Makefile adds -D_LINUX_FPU_COMPILATION_UNIT
to CC_FLAGS_FPU.
Define the macro as BUILD_BUG() there as well, so that the mistake is a
compile error rather than a guard that silently does nothing. The code
argument is kept in the expansion so the BUILD_BUG() failure is not
accompanied by set-but-unused diagnostics for variables assigned inside
it.
No current user is affected. dc/core/dc_stream.c and
dc/resource/dcn32/dcn32_resource.c are outside the dml directories, and
dc/dml2_0/dml2_wrapper.c and dc/dml2_0/dml21/dml21_wrapper.c are built
without the FPU flags because dc/dml2_0/Makefile replaces their CFLAGS
with CC_FLAGS_NO_FPU and removes CC_FLAGS_FPU.
Link: https://lore.kernel.org/all/1ead313022bc62dce1f42af9f855727eb9074443.camel@web.de/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu15/smu_v15_0_8_ppt.c:1964
smu_v15_0_8_set_performance_level() error: uninitialized symbol 'ret'.
In this line there is an "if (ret)" condition where "ret" is either
zero or uninitialized. Initialize "ret" at the start of the function to
avoid a potential uninitialized variable bug. But also delete the
condition since it is never true.
Fixes: 422b399b09c7 ("drm/amd/pm: Add od_edit_dpm_table support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A GPU reset can race with BO teardown after the BO's GTT resource has
been marked for deletion but before its drm_mm node is removed. In this
window, amdgpu_gtt_mgr_recover() can treat the node as a live BO and try
to restore its GART mapping while its TT backing is being destroyed.
Recolor the GTT node from amdgpu_bo_delete_mem_notify() so that recovery
skips it, reusing the existing color for ranges without a BO. The range
stays allocated until the resource is freed.
This prevents reset recovery from accessing a BO whose backing storage
is no longer valid.
v2: refine commit message. (David Francis)
v3: Remove new BO color. (Christian)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A PRT/sparse mapping has no backing BO, so its bo_va->base.bo is NULL.
amdgpu_vm_bo_base_init() deliberately keeps such a bo_va off the vm_bo
state lists, but the tail of amdgpu_vm_bo_update() unconditionally called
amdgpu_vm_bo_idle() for the !always_valid case, putting the NULL-bo PRT
bo_va onto the individual.idle list.
On a GPU reset amdgpu_vm_bo_reset_state_machine() moves individual.idle
to individual.needs_update with moved=true, and amdgpu_vm_handle_moved()
then dereferences bo_va->base.bo to read its reservation object,
crashing on the NULL bo (e.g. the userq eviction restore worker running
during a reset while a user queue is torn down):
BUG: kernel NULL pointer dereference, address: 0000000000000158
RIP: 0010:amdgpu_vm_handle_moved+0x17a/0x200 [amdgpu]
Call Trace:
amdgpu_userq_vm_validate_and_restore_queue+0x2ce/0x920 [amdgpu]
amdgpu_userq_restore_worker+0xce/0x210 [amdgpu]
Skip amdgpu_vm_bo_idle() when bo is NULL so a PRT mapping never lands on
a state list in the first place, and refresh the PRT page tables
explicitly in the userq restore path (as the CS path already does) so
sparse mappings survive a VRAM-lost reset. Because the PRT bo_va is off
the state lists, its PTE update fence lands in prt_va->last_pt_update
rather than vm->last_update, so wait on it explicitly before restarting
the queues (mirroring how the CS path syncs that fence).
v2:
- keep the PRT bo_va off the vm_bo state lists instead of NULL-guarding
bo inside amdgpu_vm_handle_moved(); a PRT mapping should never be on
the moved list in the first place (Christian)
v3:
- the PRT PTEs are updated separately, so their fence is in
prt_va->last_pt_update, not vm->last_update; wait on it in the userq
restore path before restarting queues, otherwise the queues could
restart before the sparse PTEs are written (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522d1 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4ba ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9eadc7 ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
radeon_driver_load_kms() calls pm_runtime_use_autosuspend() for PX
devices, but radeon_driver_unload_kms() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
unload path.
This issue was found by manual code inspection.
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we end up emitting a VM fence keep GDS and SPM
associated with that fence. If not, emit them as
part of the IB fence.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During compilation with allmodconfig with KASAN, there appears a Werror:
dml2_core_dcn5_funcs_mode_programming.c:11:13: error: stack frame size
(2400) exceeds limit (2048) in 'dcn5_mode_programming'
[-Werror,-Wframe-larger-than]
The dcn5/dcn6 dml2_core_*_funcs_mode_{programming,support} files were
split out of dml2_core_dcn4_calcs.o, which carries a relaxed
-Wframe-larger-than limit via $(frame_warn_flag) (2056 normally, or
4096 for clang + KASAN/KCSAN + COMPILE_TEST). The split-out files were
never added to the per-file CFLAGS override list, so they inherited the
strict global default of 2048. This is why these files trip the frame
size warning under KASAN while the larger dml2_core_dcn4_calcs.o does
not.
[How]
Apply the same $(frame_warn_flag) and CFLAGS_REMOVE handling used for
dml2_core_dcn4_calcs.o to the split-out files:
- dml2_core_dcn5_funcs_mode_programming.o
- dml2_core_dcn5_funcs_mode_support.o
- dml2_core_dcn6_funcs_mode_programming.o
- dml2_core_dcn6_funcs_mode_support.o
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES RS64 local memory process/gang context index may be updated,
saved, or restored improperly during queue eviction and restore cycles.
Enabling RS64 memory for MES process/gang context loading introduces
two known issues:
1. Performance regression on userq due to improper context index
handling during RS64 memory access.
2. KFDIPCTest.BasicTest failure on Navi31/32/33: the IPC buffer
GPU VA mapping is not correctly reflected in the restored RS64
process context, causing GPU page faults on the IPC shared
buffer address, which eventually leads to MES firmware becoming
unresponsive and requiring a full GPU reset to recover.
Temporarily disable MES RS64 process/gang context loading until both
issues are resolved.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff10 ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Access to hw is already suspended so there are no reasons to
disable ttm buffer funcs.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On gfx9 ASICs with mqd_on_vram(), a compute queue MQD lives in a pinned
VRAM buffer object. Pinned BOs are skipped by the VRAM eviction done at S4
suspend, so the MQD contents are lost across hibernation and the first
submission after resume page-faults on a stale MQD.
Unpin the MQD BO at suspend so the eviction migrates it into the
hibernation image, and pin it back to VRAM on resume. The BO may return at
a different VRAM address, so refresh the kernel mapping and cached GPU
addresses and patch the MQD self-address via a new update_mqd_gpu_addr()
mqd_manager op; skip eviction with a warning if that op is not implemented.
v3: use unpin/repin instead of shadowing the MQD into a separate buffer.
v4: drop the explicit VRAM->GTT placement at evict (a bare unpin is enough
for the eviction pass to move the BO out of VRAM), and also repin at queue
destroy. KFD queue restore runs late - user processes thaw before it, and
under SR-IOV it is deferred until the VF exits full access - so once the
VM has resumed an application can destroy a queue before its MQD BO is
repinned, which would otherwise unpin an already-unpinned BO and touch a
stale q->mqd.
v5: drop support for no-HWS mode, and set q->mqd to NULL at eviction.
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add clockgating and powergating flags for GC 11.5.6
and allow/disallow GFXOFF for SMU 15.0.5
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Q10 temperatures were rounded to whole degrees before being scaled
to millidegrees, losing sub-degree precision. Convert them while
preserving the fractional part.
Also, use the standard MILLIDEGREE_PER_DEGREE to represent
SMU_TEMPERATURE_UNITS_PER_CENTIGRADES.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Q10 socket power was rounded to whole watts before scaling to
milliwatts, so the reported value lost its sub-watt precision. Add
SMUQ10_TO_MILLIWATT to convert while keeping the fractional bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert SoC power directly from milliwatts using MILLIWATT_PER_WATT and
remove redundant variables.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace sprintf() with sysfs_emit() in the sysfs show callbacks of
backlight.c and lcd.c, as recommended by Documentation/filesystems/sysfs.rst.
No functional change intended.
Signed-off-by: Levente Szajko <raedrimhun@proton.me>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260805135027.43890-1-raedrimhun@proton.me
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260722065709.346072-1-panchuang@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
LEDS_EXPRESSWIRE depends on GPIOLIB, so its selector, BACKLIGHT_KTD2801
also needs to ensure GPIOLIB is enabled. Otherwise:
WARNING: unmet direct dependencies detected for LEDS_EXPRESSWIRE
Depends on [n]: NEW_LEDS [=n] && GPIOLIB [=n]
Selected by [y]:
- BACKLIGHT_KTD2801 [=y] && HAS_IOMEM [=y] && BACKLIGHT_CLASS_DEVICE [=y]
This unmet dependency was found by kconfirm, a static analysis tool for
Kconfig.
Fixes: d95963e309bc ("backlight: ktd2801: Depend on GPIOLIB")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Acked-by: Duje Mihanović <duje@dujemihanovic.xyz>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260719024902.151710-1-julianbraha@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
update_status() passes props.brightness straight to the hardware and
ignores the power/blank state tracked by the core. Writing 4 to the
bl_power sysfs attribute or blanking the framebuffer therefore leaves
the backlight lit.
Use backlight_get_brightness(), which returns 0 while the device is
blanked.
Fixes: 147b38a5ad06 ("backlight: aw99706: Add support for Awinic AW99706 backlight")
Cc: stable@vger.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@linux.dev>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260804030255.1934470-4-junjie.cao@intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The lookup helpers for dim-mode and ramp-ctl take a shortcut when
lookup_tbl is NULL: they accept any u32 value without range-checking
and return success unconditionally. Out-of-range values get silently
truncated by regmap_update_bits instead of triggering the dev_warn +
default-fallback path that the other properties use.
Add a field-width check for the NULL-table case so that values
exceeding the register field maximum are rejected the same way a
table-lookup miss is.
The switching frequency table has a second hole: reserved slots use 0
as their marker, so "awinic,sw-freq-hz = <0>" matches slot 0 and
programs a reserved encoding. Make the reserved marker U32_MAX and
skip such slots during lookup.
While here, also switch the error returns to -EINVAL for consistency.
Fixes: 147b38a5ad06 ("backlight: aw99706: Add support for Awinic AW99706 backlight")
Signed-off-by: Junjie Cao <junjie.cao@linux.dev>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260804030255.1934470-3-junjie.cao@intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The driver reads four tuning properties without the unit suffixes that
the binding mandates: "awinic,sw-freq" instead of "awinic,sw-freq-hz",
"awinic,sw-ilmt" instead of "awinic,sw-ilmt-microamp", "awinic,iled-max"
instead of "awinic,iled-max-microamp", and "awinic,uvlo-thres" instead
of "awinic,uvlo-thres-microvolt".
As a result, device_property_read_u32() never finds these properties in
a binding-conformant device tree and silently falls back to the compiled-in
defaults for switching frequency, switching current limit, max LED current,
and UVLO threshold.
Fix by aligning the property name strings in aw99706_dt_props[] with the
binding. No value/range changes are needed since both sides already use
the same units and enumerations.
Fixes: 147b38a5ad06 ("backlight: aw99706: Add support for Awinic AW99706 backlight")
Cc: stable@vger.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@linux.dev>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260804030255.1934470-2-junjie.cao@intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Asus ROG Zephyrus Duo also has a Realtek device in the ACPI that
doesn't exist in the physical hardware. This confuses the machine
driver into attempting to create DAI links for the device. Add a
quirk to remove this device.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260807121425.1952003-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic.
Updating max_dest_rd_atomic before freeing the old array can make the
free path walk past the old allocation and trigger a slab out-of-bounds
write catched by KASAN:
==================================================================
BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline]
BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline]
BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline]
BUG: KASAN: slab-out-of-bounds in rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712
Write of size 4 at addr ffff88802b8dddb8 by task syz.3.451/11063
CPU: 0 UID: 0 PID: 11063 Comm: syz.3.451 Not tainted 7.1.0 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xf7/0x600 mm/kasan/report.c:482
kasan_report+0xe4/0x120 mm/kasan/report.c:595
free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline]
free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline]
free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline]
rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712
rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623
ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625
_ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915
modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932
ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958
ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680
vfs_write+0x2aa/0x1070 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:740
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fefc75a70cd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fefc8495018 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fefc7835fa0 RCX: 00007fefc75a70cd
RDX: 0000000000000078 RSI: 0000200000000240 RDI: 0000000000000007
RBP: 00007fefc764f10f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fefc7836038 R14: 00007fefc7835fa0 R15: 00007ffcf0586aa0
</TASK>
Allocated by task 11063:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5296 [inline]
__kmalloc_noprof+0x32a/0x850 mm/slub.c:5308
kmalloc_noprof include/linux/slab.h:954 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
alloc_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:155 [inline]
rxe_qp_from_attr+0x3f8/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:714
rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623
ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625
_ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915
modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932
ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958
ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680
vfs_write+0x2aa/0x1070 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:740
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88802b8ddd80
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes to the right of
allocated 56-byte region [ffff88802b8ddd80, ffff88802b8dddb8)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2b8dd
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000000 ffff888015c418c0 dead000000000100 dead000000000122
raw: 0000000000000000 0000000800200020 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0xd2c40(GFP_NOFS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 4651, tgid 4651 ((udev-worker)), ts 123427165316, free_ts 123425874255
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0xfc/0x120 mm/page_alloc.c:1853
prep_new_page mm/page_alloc.c:1861 [inline]
get_page_from_freelist+0x75b/0x3220 mm/page_alloc.c:3941
__alloc_frozen_pages_noprof+0x27e/0x2b00 mm/page_alloc.c:5221
alloc_slab_page mm/slub.c:3278 [inline]
allocate_slab mm/slub.c:3467 [inline]
new_slab+0xa6/0x670 mm/slub.c:3525
refill_objects+0x278/0x420 mm/slub.c:7272
refill_sheaf mm/slub.c:2816 [inline]
__pcs_replace_empty_main+0x2ed/0x640 mm/slub.c:4652
alloc_from_pcs mm/slub.c:4750 [inline]
slab_alloc_node mm/slub.c:4884 [inline]
__do_kmalloc_node mm/slub.c:5295 [inline]
__kmalloc_noprof+0x68d/0x850 mm/slub.c:5308
kmalloc_noprof include/linux/slab.h:954 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
tomoyo_encode2+0x100/0x3e0 security/tomoyo/realpath.c:45
tomoyo_encode+0x29/0x50 security/tomoyo/realpath.c:80
tomoyo_realpath_from_path+0x18c/0x690 security/tomoyo/realpath.c:283
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_check_open_permission+0x2ab/0x3c0 security/tomoyo/file.c:776
tomoyo_file_open+0x6b/0x90 security/tomoyo/tomoyo.c:334
security_file_open+0x7a/0x1b0 security/security.c:2739
do_dentry_open+0x57e/0x1690 fs/open.c:924
vfs_open+0x82/0x3f0 fs/open.c:1079
do_open fs/namei.c:4699 [inline]
path_openat+0x218a/0x3190 fs/namei.c:4858
page last free pid 1 tgid 1 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
__free_pages_prepare mm/page_alloc.c:1397 [inline]
__free_frozen_pages+0x763/0xfc0 mm/page_alloc.c:2938
selinux_genfs_get_sid security/selinux/hooks.c:1364 [inline]
inode_doinit_with_dentry+0x903/0x1320 security/selinux/hooks.c:1563
selinux_d_instantiate+0x26/0x30 security/selinux/hooks.c:6658
security_d_instantiate+0x123/0x190 security/security.c:3704
d_splice_alias_ops+0x92/0x850 fs/dcache.c:3141
kernfs_iop_lookup+0x23f/0x2d0 fs/kernfs/dir.c:1289
lookup_open.isra.0+0x659/0x1080 fs/namei.c:4484
open_last_lookups fs/namei.c:4611 [inline]
path_openat+0x17dd/0x3190 fs/namei.c:4855
do_file_open+0x20c/0x430 fs/namei.c:4887
do_sys_openat2+0x101/0x1d0 fs/open.c:1364
do_sys_open fs/open.c:1370 [inline]
__do_sys_openat fs/open.c:1386 [inline]
__se_sys_openat fs/open.c:1381 [inline]
__x64_sys_openat+0x141/0x200 fs/open.c:1381
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff88802b8ddc80: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
ffff88802b8ddd00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff88802b8ddd80: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
^
ffff88802b8dde00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
ffff88802b8dde80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
Fix the OOB by moving the assignment after free_rd_atomic_resources()
so the old array is freed using the old bound. This matches the original
ordering in commit 8700e3e7c485 ("Soft RoCE driver").
Closes: https://lore.kernel.org/all/365C68B4923F8214+30195a67-0b90-4b92-ab96-2ce41517793c@smail.nju.edu.cn/
Fixes: b6bbee0d2438 ("IB/rxe: Properly honor max IRD value for rd/atomic.")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Use _ext version to have properties parsed to avoid needing to parse
them in the driver itself. More modern properties are recognized and
the LEDs can be referenced via phandle.
Due to the maximum current mechanics, LEDs are not registered right
in the first iteration over the nodes.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260806-led-modern-v4-1-eed715baab2e@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The regmap defaults should be ordered as binary search is done on the
array. A few registers were added in the wrong places, move these to be
in register address order.
Fixes: a6fe20d67dc7 ("mfd: cs42l43: Add support for the B variant")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805120109.4024451-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Hongyang Zhao <hongyang.zhao@thundersoft.com> says:
Add regulator support for the four ES8316 power domains so board
descriptions can model and control the codec supplies.
The binding patch documents AVDD, CPVDD, DVDD and PVDD as optional
supplies for ES8316, preserving compatibility with existing device-tree
descriptions. The driver patch enables the supplies before initializing
the regmap and keeps them enabled for the lifetime of the I2C device.
The missing supply model was identified while reviewing the RubikPi 3
audio support:
https://lore.kernel.org/linux-arm-msm/c293d9c7-bdb7-4303-80c8-404228c434d7@oss.qualcomm.com/
Link: https://patch.msgid.link/20260812-es8316-regulator-next-20260722-v2-0-e7078bc9bc9c@thundersoft.com
|
|
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
