| Age | Commit message (Collapse) | Author |
|---|
|
The cs89x0 driver is really two in one, and they are mutually exclusive:
- the ISA driver was used on 486-era PCs. It likely has no remaining
users, like the other ethernet drivers that got removed in
linux-7.1. The DMA support in here is the last device driver use of
the deprecated isa_bus_to_virt() interface, all other users are either
x86 specific or or got converted to the normal dma-mapping interface.
The driver was maintained by Andrew Morton at the time, based on
the linux-2.2 vendor driver from Cirrus Logic.
- the platform_driver instance was used on some embedded Arm boards
around the same time, such as the EP7211 Development Kit. This
is the same chip, but uses modern devicetree based probing and no DMA.
This was added by Alexander Shiyan.
Remove the ISA driver as a cleanup, including all of the outdated
documentation referring to its configuration.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
|
|
The UE and UE_NF cases check ce_count against UINT_MAX before incrementing
their respective counters. This is logically incorrect and prevents
ue_count and ue_nf_count from incrementing when ce_count reaches UINT_MAX.
Fixes: c11a50b170e7 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410112015.592546-1-alok.a.tiwari@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Reject zero-length writes from userspace that corrupt Debug Facility
buffers
- Replace one s390 PCI maintainer
- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally
- Replace incorrect use of phys_to_folio() to virt_to_folio() in
do_secure_storage_access()
* tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix phys_to_folio() usage in do_secure_storage_access()
s390/sclp: Remove SCLP_OFB Kconfig option
MAINTAINERS: Replace one of the maintainers for s390/pci
s390/debug: Reject zero-length input in debug_input_flush_fn()
s390/debug: Reject zero-length input before trimming a newline
|
|
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state. Adjust the code to utilize this.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260408114952.536945376@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- MD pull request via Yu:
- Fix a raid5 UAF on IO across the reshape position
- Avoid failing RAID1/RAID10 devices for invalid IO errors
- Fix RAID10 divide-by-zero when far_copies is zero
- Restore bitmap grow through sysfs
- Use mddev_is_dm() instead of open-coding gendisk checks
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes
- Replace open-coded wait loops with wait_event helpers
- NVMe pull request via Keith:
- Target data transfer size configuation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)
- Properly propagate CDROM read-only state to the block layer
* tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (35 commits)
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are a couple of nasty issues fixed here in the axiado and
rockchip drivers. We've also got more of the fixes from Johan here,
this time for the two Cadence drivers, plus a couple of other similar
fixes from John and Felix"
* tag 'spi-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amlogic-spisg: initialize completion before requesting IRQ
spi: axiado: replace usleep_range() with udelay() in IRQ path
spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
spi: cadence-quadspi: fix unclocked access on unbind
spi: cadence-quadspi: fix clock imbalance on probe failure
spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
spi: cadence: fix clock imbalance on probe failure
spi: cadence: fix unclocked access on unbind
spi: rockchip: Drop unused and broken CR0 macros
spi: rockchip: Read ISR, not IMR, to detect cs-inactive IRQ
spi: rzv2h-rspi: Fix silent failure in clock setup error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix from Arnd re-adding a dependency on gpiolib which was implicitly
pulled in via an OF specific route which got removed as part of a
cleanup"
* tag 'regulator-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rpi-panel-attiny: add back GPIOLIB dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix from Colin for a spelling mistake in a dev_warn() message"
* tag 'regmap-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Fix spelling mistake "undeferable" -> "undeferrable"
|
|
When ublk_ch_uring_cmd_cb() runs as fallback task work (e.g., because
the submitting task is exiting), the command should not be issued as
current is a kworker, not the daemon task. This can cause io->task
to capture the wrong task in __ublk_fetch(), leading to a task
mismatch warning in ublk_uring_cmd_cancel_fn().
Check tw.cancel and return -ECANCELED instead of issuing the command
from fallback context.
Fixes: 3421c7f68bba ("ublk: make sure io cmd handled in submitter task context")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260501112312.947327-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for GEM buffer objects backed by shared memory.
This introduces the BoCreateArgs structure for passing creation parameters
including flags, and adds a flags field to BoData.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-5-c69af9abe1af@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Configure the device DMA mask during probe using the GPU's physical
address capability reported in GpuInfo. This ensures DMA allocations
use an appropriate address mask.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-4-c69af9abe1af@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Tyr buffer objects are shmem-backed, so the driver should use
drm::gem::shmem::Object<BoData> as its GEM object type instead of the base
drm::gem::Object<BoData> type.
Switching to the shmem GEM object type matches how Tyr allocates and
manages its buffer objects, and uses the shmem-specific GEM abstraction
provided by the DRM Rust bindings.
Select RUST_DRM_GEM_SHMEM_HELPER to ensure the required helpers are
available when DRM_TYR is enabled.
Signed-off-by: Alvin Sun <alvin.sun@linux.dev>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-3-c69af9abe1af@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Currently the GEM inner driver data object is called `TyrObject` which
is a fairly generic name. To make the code easier to understand,
rename `TyrObject` to `BoData` so that the name better reflects its
role.
No functional change is intended.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-2-c69af9abe1af@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Currently Tyr disables its clocks from TyrDrmDeviceData::drop(), which
causes them to be shut down before any other fields in TyrDrmDeviceData
are dropped. This prevents us from using the clocks when dropping the
other fields in TyrDrmDeviceData.
In order to better control when the clocks are dropped, move this cleanup
logic into a Drop implementation on the Clocks struct itself.
Since it serves no further purpose, remove the PinnedDrop implementation
for TyrDrmDeviceData.
Also, while here, remove the #[pin_data] annotation from both the struct
Clocks and struct Regulators since neither of these structs need this
macro to create structurally pinned fields.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260428-fw-boot-prerequisites-v1-1-c69af9abe1af@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Add support for the gamepad "Nova 2 Lite" from GameSir, compatible with
the Xbox 360 gamepad.
Signed-off-by: Qbeliw Tanaka <q.tanaka@gmx.com>
Link: https://patch.msgid.link/20260429.162040.930225048583399359.q.tanaka@gmx.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add the VID/PIDs for the ASUS ROG RAIKIRI II controller to xpad_device
and the VID to xpad_table. The controller has a physical PC/XBOX toggle
which switches between XBOX360 and XBOXONE protocols.
Signed-off-by: Dmitriy Zharov <contact@zharov.dev>
Link: https://patch.msgid.link/20260430183522.122151-1-contact@zharov.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Support for the ezx series of phones was removed in 2022, this
driver is just dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-2-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Support for the ezx series of phones was removed in 2022, this
driver is just dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Change INTEL_SIP_SMC_FCS_GET_PROVISION_DATA's SMC call to async from sync
to avoid long runtime which may cause the watchdog timeout issue.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
API Fixes:
- Add missing pad and extensions check (Jonathan)
- Reject unsafe PAT indices for CPU cached memory (Jia)
Driver Fixes:
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge (Brost)
- Xe3p tuning and workaround fixes (Roper, Gustavo)
- USE drm mm instead of drm SA for CCS read/write (Satya)
- Fix leaks and null derefs (Shuicheng)
- Fix Wa_18022495364 (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/afO05KvmFMn_7qcY@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.1-2026-04-30:
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260430135619.3929877-1-alexander.deucher@amd.com
|
|
Use a flexible array member to combine allocations. Simplifies memory
management.
Add __counted_by for extra runtime analysis. Also move counting variable
assignment up as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-04-29
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Extend query_esw_functions output for multi-function support
net/mlx5: Remove unused host_sf_enable field
net/mlx5: Add function_id_type for enable/disable_hca cmds
mlx5: Rename the vport number enums for host PF and VF
====================
Link: https://patch.msgid.link/20260429212747.224411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When cn20k default L2 rules are not installed,
npc_cn20k_dft_rules_idx_get() leaves broadcast, multicast, promiscuous, and
unicast slots at USHRT_MAX. npc_get_nixlf_mcam_index() previously returned
that sentinel as a valid MCAM index, so callers could program hardware with
an invalid index.
Return -EINVAL from the cn20k branches of npc_get_nixlf_mcam_index() when
the requested slot is still USHRT_MAX. Harden cn20k NPC MCAM entry helpers
to reject out-of-range indices before touching hardware.
Drop the early bounds check in npc_enable_mcam_entry() for cn20k so invalid
indices are validated inside npc_cn20k_enable_mcam_entry() instead of being
silently ignored.
In rvu_npc_update_flowkey_alg_idx(), treat negative MCAM indices like
out-of-range values, and only update RSS actions for promiscuous and
all-multi paths when the resolved index is non-negative.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-11-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_dft_rules_free() used the NPC MCAM mbox "free all" path, which
does not match how cn20k tracks default-rule MCAM slots indexes.
Resolve the default-rule indices, then for each valid slot clear the bitmap
entry, drop the PF/VF map, disable the MCAM line, clear the target
function, and npc_cn20k_idx_free(). Remove any matching software mcam_rules
nodes. On hard failure from idx_free, WARN and stop so the box stays up for
analysis.
In npc_mcam_free_all_entries(), prefetch the same default-rule indices and,
on cn20k, skip bitmap clear and idx_free when the scanned entry is one of
those reserved defaults (they are released by npc_cn20k_dft_rules_free).
Fixes: 09d3b7a1403f ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-10-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_dft_rules_idx_get() wrote USHRT_MAX into individual outputs only
on some error paths (lbk promisc lookup, VF ucast lookup, and the PF rule
walk), which could leave other caller slots stale across retries.
Set every non-NULL bcast/mcast/promisc/ucast pointer to USHRT_MAX once at
entry, then drop the duplicate assignments on failure. Successful lookups
still overwrite the relevant slot before returning.
Fixes: 09d3b7a1403f ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-9-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_read_mcam_entry() always reloaded action and vtag_action from
bank 0 after programming the CAM words. Use the bank returned by
npc_get_bank() for the ACTION reads as well, and read those registers once
up front so both X2 and X4 paths share the same metadata.
Return directly from the X2 keyword path now that the action fields are
already populated.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-8-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For X4 keys its loop reused the bank parameter as the loop counter, so bank
no longer reflected the caller's bank after the loop and the control flow
was hard to follow.
Program NPC_AF_CN20K_MCAMEX_BANKX_CFG_EXT directly in
npc_cn20k_config_mcam_entry(): one CFG write for X2 using the computed
bank, and one CFG write per bank inside the X4 action loop. Enable the
entry at the end with npc_cn20k_enable_mcam_entry(..., true) instead of
embedding the enable bit in bank_cfg via the removed helper.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 4e527f1e5c15 ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-7-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the old four-argument CN20K MCAM clear with a per-bank static
helper and npc_cn20k_clear_mcam_entry() that takes a logical MCAM index,
resolves the key width via npc_mcam_idx_2_key_type(), and clears either one
bank (X2) or every bank (X4).
Call it from npc_clear_mcam_entry() on cn20k and log when key-type lookup
fails. Use the per-bank helper from npc_cn20k_config_mcam_entry() for
pre-program clears.
For loopback VFs, use the promisc MCAM index as ucast_idx when copying RSS
action for promisc, matching cn20k default-rule layout.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-6-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_defrag_move_vdx_to_free() disables, copies, and enables the MCAM entry
at a new index but previously left entry2target_pffunc[] and the mcam_rules
list still keyed to the old index. Copy the target PF association to the
new slot, clear the old one, and retarget the rule entry so software state
matches the relocated hardware context.
Fixes: 645c6e3c1999 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes on
bank0 then bank1. On failure it rolls back by freeing entries already
placed in save[].
__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid. The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero in
rc and a later __npc_subbank_free() failure could still end with return 0
when the allocation path had also left rc at zero (for example shortfall
after zero return values from the alloc helpers).
Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno. If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation phase.
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 645c6e3c1999 ("octeontx2-af: npc: cn20k: virtual index support")
Link: https://lore.kernel.org/netdev/adjNJEpILRZATB2N@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
debugfs is not intended to be checked for allocation failures the way other
kernel APIs are: callers should not fail probe or subsystem init because a
debugfs node could not be created, including when debugfs is disabled in
Kconfig. Replacing NULL checks with IS_ERR() checks is similarly wrong for
optional debugfs.
Remove dentry checks and -EFAULT returns from npc_cn20k_debugfs_init().
See:
https://staticthinking.wordpress.com/2023/07/24/
debugfs-functions-are-not-supposed-to-be-checked/
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 528530dff56b ("octeontx2-af: npc: cn20k: add debugfs support")
Link: https://lore.kernel.org/netdev/adjNGPWKMOk3KgWL@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_mcam_idx_2_key_type() can fail; callers used to ignore it and still
used kw_type when enabling, configuring, copying, and reading MCAM entries.
That could program or decode hardware with an undefined key type.
Return -EINVAL when key-type lookup fails. Return -EINVAL from
npc_cn20k_copy_mcam_entry() when src and dest key types differ instead of
failing silently.
Change npc_cn20k_{enable,config,copy,read}_mcam_entry() to return int on
success or error. Thread those errors through the cn20k MCAM write and read
mbox handlers, the cn20k baseline steer read path, NPC defrag move
(disable/copy/enable with dev_err and -EFAULT), and the DMAC update path in
rvu_npc_fs.c.
Make npc_copy_mcam_entry() return int so the cn20k branch can return
npc_cn20k_copy_mcam_entry() without a void/int mismatch, and fail
NPC_MCAM_SHIFT_ENTRY when copy fails.
Cc: Suman Ghosh <sumang@marvell.com>
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Link: https://lore.kernel.org/netdev/adiQJvuKlEhq2ILx@stanley.mountain/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-2-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several fixes from Johan for issues with unbind and error handling in
probe.
|
|
Several fixes from Johan for probe failure and unbind issues in the
cadence-quadspi driver.
|
|
airoha_dev_xmit()
In order to respect the original descriptor order and avoid any
potential IOMMU fault or memory corruption, move pending queue entries
to the head of hw queue tx_list if the DMA mapping of current inflight
packet fails in airoha_dev_xmit routine.
Fixes: 3f47e67dff1f7 ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260429-airoha-xmit-unmap-error-path-v2-1-32e43b7c6d25@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d569c
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag.
Fixes: eb4898fde1de ("net: libwx: add wangxun vf common api")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/786DDC7D5CCA6D0A+20260429083743.88961-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn).
Fixes: a04ea57aae37 ("net: libwx: fix device bus LAN ID")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/4D1F4452D21DE107+20260429083743.88961-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Besides an out-of-bound bug, this is about properly supporting Winbond
octal SPI NAND chips which use a specific pattern for stuffing more
address bits in some operations. This uses the spi-mem flag in SPI
NAND that was added to the spi-mem layer just before the merge window
through the spi tree"
* tag 'mtd/fixes-for-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: winbond: Fix ODTR write VCR on W35NxxJW
mtd: spinand: winbond: Set the packed page read flag to W35N02/04JW
mtd: spinand: Add support for packed read data ODTR commands
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
|
|
In the current VSI mailbox implementation, the VSI allocates a DMA buffer
to store the message sent to the PSI. When the PSI receives the message
request from the VSI, the hardware copies the message data from this DMA
buffer to PSI's DMA buffer for processing.
When enetc_msg_vsi_send() times out, two scenarios can occur:
1) Use-after-free: If the hardware hasn't completed message copying when
the VSI frees the buffer, the hardware may subsequently copy the data
from freed memory to PSI's DMA buffer.
2) Message race: If PSI hasn't processed the previous message when the
next message is sent, the VSI may receive the previous message's
reply, leading to incorrect handling.
To address these issues, implement the following changes:
- Check the mailbox busy status before sending a new message. If the
mailbox is in busy state, it indicates the previous message is still
being processed, so return an error immediately.
- Add the 'msg' field to struct enetc_si to preserve the DMA buffer
information. The caller of enetc_msg_vsi_send() no longer frees the
DMA buffer. Instead, defer freeing until it is safe to do so (when
mailbox is not busy on next send).
- Add cleanup in enetc_vf_remove() to free the last message buffer.
This ensures the DMA buffer remains valid during message copying and
prevents message reply mismatches.
Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260429081930.3259824-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix leftover issues in the ACPI Time and Alarm Device (TAD)
driver on top of the recently merged updates of it and address
assorted issues in the ACPI support code:
- Fix removal code ordering in the ACPI TAD driver, refine timer
value computations and checks in its RTC class device interface,
make it use the __ATTRIBUTE_GROUPS() macro, and fix a comment in it
(Rafael Wysocki)
- Fix EINJV2 memory error injection in APEI (Tony Luck)
- Add missing notifier_block structure forward declaration to
acpi_bus.h (Bartosz Golaszewski)
- Fix related_cpus inconsistency during CPU hotplug in the ACPI CPPC
library (Jinjie Ruan)
- Add a quirk to force native backlight on HP OMEN 16 (8A44) in the
ACPI video bus driver (Shivam Kalra)"
* tag 'acpi-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: add missing forward declaration to acpi_bus.h
ACPI: video: force native backlight on HP OMEN 16 (8A44)
ACPI: TAD: Fix up a comment in acpi_tad_probe()
ACPI: TAD: RTC: Refine timer value computations and checks
ACPI: TAD: Use devres for all driver cleanup
ACPI: TAD: Use __ATTRIBUTE_GROUPS() macro
ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug
ACPI: APEI: EINJ: Fix EINJV2 memory error injection
ACPICA: Provide #defines for EINJV2 error types
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN8814 QSGMII soft reset was moved into the probe function to avoid
triggering it for each of 4 PHY-s in the package.
However, that broke QSGMII link between the MAC and PHY on most LAN8814
PHY-s, specificaly for us on the Microchip LAN969x switch.
Reading the QSGMII status registers it was visible that lanes were only
partially synced.
It looks like the reset timing is crucial, so lets move the reset back
into the .config_init function but guard it with phy_package_init_once()
to avoid it being triggered on each of 4 PHY-s in the package.
Change the probe function to use phy_package_probe_once() for coma and PtP
setup.
Fixes: 96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 20e0c197802c545db220157fafd567a10f2b7672.
Despite claiming to add GA100 support, that commit actually has quite
a few problems. It falsely claims that there is no VBIOS. GA100 does
have a VBIOS, but it has no display engine, so it cannot use the
PRAMIN method the read VBIOS and must fall back to using PROM.
For whatever reason, the VBIOS on GA100 has an "Init-from-ROM"
(IFR) header where the PCI Expansion ROM would normally be found.
So to find that ROM, Nouveau needs to parse the IFR header.
The commit also falsely claimed that there is no graphics (GR) engine.
So rather than try to fix that commit, just revert it and start over
from scratch.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The functions show_fan(), show_pwm1(), show_temp11(),
temp2_crit_hyst_show(), and show_lut_temp_hyst() access shared cached
data without holding the update lock. This can cause TOCTOU races if
the cached values change between the checks and the later calculations.
Those cached values are updated in lm63_update_device(). In the general
case, the affected functions combine multiple cached values without
locking and can therefore observe a mixed old/new snapshot. In
addition, show_fan() reads data->fan[nr] locklessly while
lm63_update_device() updates data->fan[0] in two steps, which can
expose an intermediate torn value and potentially trigger a
divide-by-zero error. This means that converting the macro to a
function is not sufficient to fix show_fan().
Hold the update lock across the whole read and calculation sequence so
that the values remain stable.
Check the other functions in the driver as well. Keep them unchanged
because they either do not access shared cached values multiple times
or already do so under lock.
Link: https://lore.kernel.org/linux-hwmon/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: e872c91e726e ("hwmon: (lm63) Add support for unsigned upper temperature limits")
Fixes: d216f6809eb6 ("hwmon: (lm63) Expose automatic fan speed control lookup table")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20260416135703.53262-1-hanguidong02@gmail.com
[groeck: Use lm63_update_device() to get driver data in temp2_crit_hyst_store]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add thermal cooling device support to control the temperature by throttling data
transmission. Throttling is performed by suspending data TX queues according to
a configured duty-cycle off percentage. The thermal cooling device allows users
to configure the duty-cycle off percentage and operate the device with the
selected value.
User configuration updates a single duty-cycle off percentage, which is applied
uniformly by the host and treated as only one temperature level. This value
remains in effect until updated again by the user. All other thermal throttling
parameters continue to use their default firmware provided values.
Reject invalid duty-cycle off percentage values that fall outside the supported
range. Register a cooling device to allow the thermal framework to query and set
the current throttle state, report the maximum supported state, and keep the
host state in sync with successful firmware updates. A throttle state of zero
restores the default firmware thermal configuration.
Command to set the duty-cycle off percent:
echo 40 > /sys/devices/pci0000:00/0000:00:1d.1/0000:58:00.0/ieee80211/phyX/cooling_device0/cur_state
Command to read duty-cycle off percent:
cat /sys/devices/pci0000:00/0000:00:1d.1/0000:58:00.0/ieee80211/phyX/cooling_device0/cur_state
Command to read the maximum duty-cycle off percent:
cat /sys/devices/pci0000:00/0000:00:1d.1/0000:58:00.0/ieee80211/phyX/cooling_device0/max_state
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260413153840.1969931-6-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
A later change adds thermal cooling device sysfs under the wiphy device kobject.
With the current teardown order, MAC/wiphy are unregistered before per-device
cleanup, so any subsequent thermal sysfs removal would run after the wiphy kobject
is gone. That ordering is asymmetric with setup and would risk kernfs issues during
removal.
This change also adjusts the position of ath12k_mac_mlo_teardown(). Previously
it ran before per-device cleanup/MAC unregister. MLO teardown issues WMI to teardown
multi-link state and is part of the MAC teardown sequence. Placing it alongside
MAC unregister (after per-device cleanup) preserves setup/teardown symmetry and
avoids racing with remaining netdev/wiphy state.
Reorder hw_group_stop() so per-device cleanup (including thermal/hwmon sysfs
removal) runs while the wiphy still exists. After per-device cleanup completes,
unregister the MAC (dropping wiphys), run ath12k_mac_mlo_teardown(), and finally
destroy the MAC. This mirrors the setup sequence and keeps sysfs cleanup safe
when introduced in a later patch.
To keep start/stop symmetry, add ath12k_core_device_setup() to encapsulate the
per-device bring-up steps (pdev create, IRQ enable, rfkill config) that were
previously open-coded in hw_group_start(). Use this helper in hw_group_start()
to match the existing per-device cleanup helper used by hw_group_stop().
Note that set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags) is now executed outside
the ab->core_lock critical section. The core_lock has not provided protection for
the REGISTERED flag, readers do not rely on core_lock for this bit, and the flag
is only toggled in the serialized group start/stop path using atomic bitops.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260413153840.1969931-5-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Both the error path in thermal registration and the normal thermal unregister
path performed the same hwmon device unregistration and pointer cleanup.
Consolidate this logic into a single helper to reduce code duplication and ensure
consistent cleanup across all paths. Add a helper to set up the hwmon registration
during thermal registration to keep symmetry with thermal cleanup.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260413153840.1969931-4-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Ath12k firmware supports thermal-throttling but requires the host to explicitly
program throttle levels and mitigation actions via WMI. Without this configuration,
firmware-driven thermal mitigation remains inactive or relies on platform-specific
defaults.
Add host-side support to build and send thermal-throttle configuration using
WMI_THERM_THROT_SET_CONF_CMDID during MAC radio start, ensuring thermal parameters
are programmed before data traffic begins.
Maintain per-radio storage for thermal throttle levels and provide conservative
default level tables for Internal Power Amplifier Device (IPA) and External Power
Amplifier Device or External Front End Module (XFEM) targets. The appropriate
default table is selected based on firmware-advertised service bits, allowing the
host to align with target thermal mitigation capabilities. If the WMI TLV service
WMI_TLV_SERVICE_IS_TARGET_IPA bit is set, then host selects the thermal throttle
values from IPA index from the table and selects values from XFEM index from the
table if this WMI TLV service bit is not set.
Build and send the thermal throttle configuration request with either 4 or
5 levels depending on firmware capability, and populate optional fields
(pout reduction and tx chain mask) only when the corresponding service bits
are advertised.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260413153840.1969931-3-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
