| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the driver uses memory profile parameters to determine the
maximum number of supported clients, with a default limit of 512 for
single-radio and 128 for DBS and DBS+SBS configurations. However,
some devices have lower hardware limits depending on the radio
configuration. Exceeding these hardware-specific limits can lead to
firmware crashes.
Add hardware parameters in ath12k_hw_params to define the maximum supported
clients for each radio configuration. The driver uses the minimum of the
memory profile limit and the hardware capability limit to prevent exceeding
hardware constraints.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260515030909.3312511-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: a27fa6148dac ("wifi: ath12k: support change_sta_links() mac80211 op")
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512044906.1735821-3-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 477cabfdb776 ("wifi: ath12k: modify link arvif creation and removal for MLO")
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512044906.1735821-2-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For some chipsets, firmware can report HTT_T2H_MSG_TYPE_PEER_MAP2 with
peer_id 0 as a valid value for mapping ath12k_dp_link_peer to
ath12k_dp_peer.
ath12k_dp_peer_find_by_peerid() currently treats peer_id 0 as invalid.
When firmware assigns peer_id 0, peer lookup fails. As a result,
DHCP OFFER packets are dropped in __ieee80211_rx_handle_packet()
because pubsta is NULL.
ath12k_dp_rx_deliver_msdu() <- rx_info->peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
ieee80211_rx_napi <- pubsta NULL
ieee80211_rx_list
__ieee80211_rx_handle_packet <- pubsta NULL, skb undelivered
The following error in the TX completion path is caused by the same issue:
ath12k_wifi7_pci 0000:04:00.0: dp_tx: failed to find the peer with peer_id 0
The error message is triggered by:
ath12k_wifi7_dp_tx_complete_msdu
ath12k_dp_link_peer_find_by_peerid <- ts->peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
ath12k_dp_tx_htt_tx_complete_buf
ath12k_dp_link_peer_find_by_peerid <- peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
Fix this by allowing peer_id 0 in ath12k_dp_peer_find_by_peerid() and
rejecting only values >= ATH12K_DP_PEER_ID_INVALID.
Also update peer_id 0 handling in monitor path:
Always call ath12k_dp_link_peer_find_by_peerid() in
ath12k_dp_rx_h_find_link_peer() to fetch the peer, including when
peer_id is 0.
Always store peer_id in ppdu_info->peer_id in
ath12k_wifi7_dp_mon_rx_parse_status_tlv(), including peer_id 0.
Tested-on: QCC2072 hw1.0 PCI WLAN.COL.1.0.c2-00074-QCACOLSWPL_V1_TO_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hangtian Zhu <hangtian.zhu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512025732.1297849-1-hangtian.zhu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 9a0dddfb30f1 ("wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512021108.2031651-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In monitor mode, the driver incorrectly assigns the legacy rate
to the rate_idx field of the radiotap header for HT/VHT/HE/EHT
frames, ignoring the actual MCS value parsed from the hardware.
This causes packet analyzers (like Wireshark) to display incorrect
MCS values (e.g., legacy base rates instead of the true MCS).
Fix this by assigning ppdu_info->mcs as the default rate_mcs
in ath12k_dp_mon_fill_rx_rate(), and remove rate_idx assignments in
ath12k_dp_mon_update_radiotap() to preserve
the previously calculated MCS values (including the HT NSS offset).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ
Fixes: 5393dcb45209 ("wifi: ath12k: change the status update in the monitor Rx")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220864
Signed-off-by: Kwan Lai Chee Hou <laicheehou9@gmail.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507015336.14636-1-laicheehou9@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When P2P support is enabled, wpa_supplicant creates a p2p-device
interface by default, which implicitly consumes one vdev. On systems
managed by NetworkManager, this interface cannot be reliably disabled,
leaving only two usable interfaces for user configurations.
Increase num_vdevs to four for QCA6390 hw2.0, WCN6855 hw2.0/hw2.1,
QCA2066 hw2.1, and QCA6698AQ hw2.1 to account for the implicit
p2p-device and enable common concurrency scenarios such as AP + AP + STA.
This change increases interface concurrency in the two-channel scenario
by raising the maximum vdev limit, while keeping other combination rules
unchanged.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260525020711.2590815-1-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In the WBM error path, while processing TKIP MIC errors, MSDU length
is fetched from the hal_rx_desc's msdu_end. This MSDU length is
directly passed to skb_put() without validation. In stress test
scenarios, the WBM error ring may receive invalid descriptors, which
could lead to an invalid MSDU length.
To fix this, add a check to drop the skb when the calculated MSDU
length is greater than the skb size.
This is adapted from the discussion/patch of the ath12k driver [1].
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Link: https://lore.kernel.org/linux-wireless/20250416021903.3178962-1-nithyanantham.paramasivam@oss.qualcomm.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512022351.2033155-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath11k_dp_rx_h_undecap_nwifi() function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially result in invalid data access and memory corruption.
Kernel stack is corrupted in: ath11k_dp_rx_h_undecap+0x6b0/0x6b0 [ath11k]
Call trace:
ath11k_dp_rx_h_mpdu+0x0/0x2e8 [ath11k]
ath11k_dp_rx_h_mpdu+0x1e0/0x2e8 [ath11k]
ath11k_dp_rx_wbm_err+0x1e0/0x450 [ath11k]
ath11k_dp_rx_process_wbm_err+0x2fc/0x460 [ath11k]
ath11k_dp_service_srng+0x2e0/0x348 [ath11k]
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
This adapted from the discussion/patch of the ath12k driver [1].
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Link: https://lore.kernel.org/linux-wireless/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512022351.2033155-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Convert kzalloc_obj + kcalloc to kzalloc_flex to save an allocation.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation before any potential accesses.
kzalloc_flex does this anyway for GCC >= 15.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428205017.26288-1-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
This reverts commit 4e88de313ff4d1c67b644b1f39f9fb4089711b71.
The early GuC FW definition meant for our CI branch was accidentally
merged to the drm-xe-next branch instead. This GuC FW will never be
released to linux-firmware, so we do not want the definition to be
available in the mainline Linux codebase.
Fixes: 4e88de313ff4 ("drm/xe/nvls: Define GuC firmware for NVL-S")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v7.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260529193558.185436-11-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 65b8e0ac86e48cfc9128c04dfc53ea3395d030dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The @dev member described in the kernel-doc does not exist in the
struct. Remove the stale entry.
Fixes: 0610430e3dea ("HID: logitech-hidpp: add input_device ptr to struct hidpp_device")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Use __free(kfree) cleanup facility for the temporary buffer in
wacom_wac_queue_flush() to simplify error paths and ensure the buffer
is freed automatically when it goes out of scope.
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing.
Reported-by: Sashiko-bot <sashiko-bot@kernel.org>
Fixes: 5e013ad20689 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo
doesn't have enough space for the incoming report. If the kfifo is
empty, kfifo_skip() reads stale data left in the kmalloc'd buffer
via __kfifo_peek_n() and interprets it as a record length, advancing
fifo->out by that garbage value. This corrupts the internal kfifo
state, causing kfifo_unused() to return a value much larger than the
actual buffer size, which bypasses __kfifo_in_r()'s guard:
if (len + recsize > kfifo_unused(fifo))
return 0;
kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to
3842 bytes past the 256-byte buffer.
Add a !kfifo_is_empty() condition to the while loop so kfifo_skip()
is never called on an empty fifo, and check the return value of
kfifo_in() to reject reports that are too large for the fifo.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5e013ad20689 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The pen setup for this device uses bluetooth for
communicating battery levels and status instead of
reporting it over i2c.
Without this quirk, the device either reports an
extra, broken phantom battery, or hangs.
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The module is storing an integer inside the drvdata pointer, which is
confusing - furthermore this integer is mutable. When its value is
changed it is set again using the 'hid_set_drvdata' API within
the 'cp_event' function.
Let's fix this, create and allocate the 'cp_device' struct that is then
set as the drvdata and then simply use its integer 'quirks' field for
storing the quirks, which shall make the code cleaner, type-safe,
consistent and more readable.
This makes the cast to (void *) during storage unnecessary and the cast
to (unsigned long) during retrieval is also removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some tab characters snuck into the data layout table for turntable
extensions, which resulted in the table only looking right at a tabstop
of 4, which is uncommon in the kernel. Change them to the equivalent
amount of spaces, which should look correct in any editor.
While at it, also fix the other whitespace errors (trailing spaces at
end of line) introduced in the same commit.
Fixes: 05086f3db530b3 ("HID: wiimote: Add support for the DJ Hero turntable")
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The maximum number of concurrent background work items (promotions,
demotions, writebacks) in the SMQ policy was hardcoded to 4096, with
a FIXME comment noting it should be made configurable.
This value was originally tuned down from 10240 to balance memory
overhead (~128 bytes per entry, ~512KB at 4096 entries) against I/O
parallelism. However, different workloads and cache sizes may benefit
from different limits:
- Write-heavy workloads may need more writeback concurrency
- Very large caches (10+ TB) may need more promotion slots
- Memory-constrained systems may want a lower limit
Make this configurable via the module parameter "smq_max_background_work"
(defaulting to 4096 to preserve existing behaviour). Clamp the value to
at least 1 to prevent setting 0, which would block all background work.
The parameter only affects newly created cache devices; existing caches
retain their value from creation time.
Signed-off-by: Cao Guanghui <caoguanghui@kylinos.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v7.1-rc7
This includes more fixes to harden XDomain message handling against
possible malicious hosts.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.1-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Limit XDomain response copy to actual frame size
thunderbolt: Validate XDomain request packet size before type cast
thunderbolt: Clamp XDomain response data copy to allocation size
thunderbolt: Bound root directory content to block size
thunderbolt: Reject zero-length property entries in validator
|
|
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock.
Fixes: 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Alexey Charkov <alchark@flipper.net> says:
The Nuvoton NAU8822 codec has four power supply pins: VDDA, VDDB, VDDC
and VDDSPK, which must be online and stable before the device can be
accessed over I2C. On boards where these rails are software-controlled,
probing the codec before the regulators are up results in -ENXIO errors
during register access.
This short series adds optional regulator support to both the device
tree binding and the driver, so platforms that need explicit power
sequencing can describe and enforce it:
Link: https://patch.msgid.link/20260525-nau8822-reg-v2-0-7d37ae393e46@flipper.net
|
|
When the SPI controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the SPI controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
Suggested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20260525-tegra194-qspi-iommu-v2-1-a11c53f804b2@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dmaengine_terminate_all() has been deprecated, so replace it with
dmaengine_terminate_sync().
Fixes: ba9b28652c75 ("spi: imx: enable DMA mode for target operation")
Fixes: a450c8b77f92 ("spi: imx: handle DMA submission errors with dma_submit_error()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20260525062928.3191821-1-carlos.song@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Carlos Song (OSS) <carlos.song@oss.nxp.com> says:
This series fixes two issues in the fsl-lpspi DMA transfer error paths.
Patch 1 replaces the deprecated dmaengine_terminate_all() with
dmaengine_terminate_sync() across all error paths in
fsl_lpspi_dma_transfer().
Patch 2 fixes a missing RX DMA channel termination when TX descriptor
preparation fails. Since the RX channel is already submitted and issued
before the TX descriptor is prepared, returning -EINVAL without
terminating the RX channel leaves it running against buffers that the
SPI core will unmap, potentially causing memory corruption.
Link: https://patch.msgid.link/20260525062357.3191349-1-carlos.song@oss.nxp.com
|
|
When dmaengine_prep_slave_sg() fails for the TX channel, the error path
terminates the TX DMA channel but leaves the RX channel running. Since
the RX channel was already submitted and issued prior to preparing
the TX descriptor, returning -EINVAL causes the SPI core to unmap the
DMA buffers while the RX DMA engine continues writing to them, leading
to potential memory corruption or use-after-free.
Terminate the RX channel before returning on the TX prepare failure path.
Fixes: 09c04466ce7e ("spi: lpspi: add dma mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20260525062357.3191349-3-carlos.song@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dmaengine_terminate_sync()
dmaengine_terminate_all() has been deprecated, so replace it with
dmaengine_terminate_sync().
Fixes: 09c04466ce7e ("spi: lpspi: add dma mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20260525062357.3191349-2-carlos.song@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The original code set use_dma to false when dma_alloc_coherent() for
bounce buffers failed, but DMA channels acquired earlier via
atmel_spi_configure_dma() were never freed.
When devm_request_irq() or clk_prepare_enable() failed later in probe,
the driver also did not release DMA channels or bounce buffers already
allocated.
The out_free_dma error path released DMA channels but did not free the
bounce buffers.
Fix by moving bounce buffer allocation into atmel_spi_configure_dma()
and registering the devres cleanup for DMA channels and bounce buffers.
Fixes: a9889ed62d06 ("spi: atmel: Implements transfers with bounce buffer")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260522-atmel-v3-1-23f8c6e6aa43@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The IBM EMAC programs its Maximum Jumbo Size (MJS) drop
threshold from ndev->mtu directly. The hardware sizes the threshold
against the L2 frame minus the ethernet header, but does not
discount the 802.1Q tag, so a frame carrying a VLAN tag and a full
1500-byte payload exceeds MJS by exactly 4 bytes and is dropped.
This is normally hidden because JPSM (and therefore the MJS check)
only engages when the MTU is raised above ETH_DATA_LEN. With the
qca8k DSA tagger the conduit MTU is bumped by QCA_HDR_LEN to 1502
during dsa_conduit_setup(), which is enough to enable JPSM and
expose the off-by-VLAN-tag in the limit.
Pad MJS by VLAN_HLEN so a VLAN-tagged full-MTU frame passes.
Reported on Meraki MX60 (qca8k switch): tagged VLAN
traffic drops at 1500-byte payload, while 1496 bytes works
and untagged 1500 bytes works.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260526202247.13823-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v7.2 (take two)
- Add GPIO config support on RZ/G2L,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v7.2-1
* Tidy up the PWM base computation to avoid false positive *SAN warnings
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Assuming callback != NULL && !page_queue, cmd_work_handler takes
command entry with refcnt == 1 from mlx5_cmd_invoke.
If either semaphore timeout or index allocation error happens,
it does final cmd_ent_put(ent). To avoid access to freed memory,
notify slotted completion before cmd_ent_put.
This is theoretical issue found by Svace static analyser.
Cc: stable@vger.kernel.org
Fixes: 485d65e135712 ("net/mlx5: Add a timeout to acquire the command queue semaphore")
Fixes: 0e2909c6bec90 ("net/mlx5: Fix variable not being completed when function returns")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Md Haris Iqbal <haris.iqbal@linux.dev>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260526162932.501584-1-kniv@yandex-team.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c014e ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
tb_test_tunnel_3dp() allocates three DisplayPort tunnels
but only releases the first two before returning. Release the
third tunnel as well to keep the test cleanup balanced.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL.
Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-4-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX.
Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-3-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary.
Fixes: 4747ab89b4a6 ("fpga: dfl: add basic support for DFHv1")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-2-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
|
|
snap_count is u32 but the comparison is against a SIZE_MAX-derived value
(~2^61 on 64-bit), which clang flags as always false with
-Wtautological-constant-out-of-range-compare.
The proper check here should be that snap_count does not go over
RBD_MAX_SNAP_COUNT.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260530011255.52916-1-rosenp@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- rc: igorplugusb: fix control request setup packet
- vsp1: revert a couple patches to fix regressions when setting DRM
pipelines
* tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rc: igorplugusb: fix control request setup packet
Revert "media: renesas: vsp1: brx: Fix format propagation"
Revert "media: renesas: vsp1: Initialize format on all pads"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- davinci: fix fallback bus frequency on missing clock-frequency
- virtio: mark device ready initially
* tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: virtio: mark device ready before registering the adapter
i2c: davinci: fix division by zero on missing clock-frequency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
|
