| Age | Commit message (Collapse) | Author |
|---|
|
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b1e ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] https://github.com/nyrahul/linux-kernel-configs/tree/f0bee86a135a0406ea427855f52702dd00d770f9
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The hgafb driver supports graphics adapters compatible with the Hercules
adapter from 1984. These were ISA cards or onboard devices that supported
monochrome 720x348 graphics. This driver was created in 1999 by Ferenc Bakonyi.
In the entire Git history (since Linux 2.6.12-rc2), there has only been one
commit in 2010 which indicated that the driver was in use, commit 529ed806d454
("video: Fix the HGA framebuffer driver"). The commit message states:
Only tested with fbcon, since most fbdev-based software appears
to only support 12bpp and up. It does not appear that this driver has
worked for at least the entire 2.6.x series, perhaps since 2002.
Given the age and limited capabilities of the hardware and the lack of
users, remove this driver and move the former maintainer to CREDITS.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since "vfio/pci: Set up barmap in vfio_pci_core_enable()", the
resource request and iomap for the BARs was performed early, and
vfio_pci_core_setup_barmap() just checks those actions succeeded.
Move this logic to a new helper that checks success and returns the
iomap address, replacing the various bare vdev->barmap[] lookups.
This maintains the error behaviour of the previous on-demand
vfio_pci_core_setup_barmap() scheme.
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511145829.2993601-4-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The function ieee80211_tx_status() was renamed to
ieee80211_tx_status_skb() by commit 2703bc851399
("wifi: mac80211: rename ieee80211_tx_status() to
ieee80211_tx_status_skb()"). Update the stale reference
in ath10k_htt_tx_hl().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321110011.8556-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420110130.509670-1-jtornosm@redhat.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The ldo_vcn33_[12]_wifi and ldo_vcn33_[12]_bt are just two regulator
outputs instead of four. The wifi and bt parts refer to separate enable
bits that are OR-ed together to affect the actual regulator output. The
separate bits allow the wifi and bt stacks to enable their power without
coordination between them. These have been deprecated in favor of proper
nodes matching the output.
Add proper ldo_vcn33_[12] regulators to replace the existing ones. The
enable status is synced to just one of the two enable bits, and the
other is forced off. This makes the handling in other bits simpler.
The existing *_(bt|wifi) regulators are converted to no-op regulators
that are fed from their new respective ldo_vcn33_[12] regulator. This
allows existing device trees to continue to work.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6359 regulator DT binding defines the supply names for the PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply. The name
of the supply is related to the name of the buck regulator. The LDOs
have shared supplies.
Add the supply name to the declaration of each regulator. At the moment
they are declared explicitly, but the buck regulator macro can be made
to derive both the match string and supply name from the base name once
the *_sshub regulators are figured out and removed. For context, the
*_sshub regulators are not separate regulators, but separate settings
for the same name regulators without the "_sshub" suffix.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The regulator descriptions and extended descriptions don't change at
runtime. The only reason they are not const is that the regulator
driver data is non-const.
Const-ify the descriptions and all references to them. For the driver
data, explicitly cast it to non-const void *.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
oob fix
Commit 2f7ae8ab6aa73 ("clk: microchip: mpfs-ccc: fix out of bounds
access during output registration") fixed the out of bounds access, but
it did so by packing sparse indices into a linear space. When
peripheral drivers request clocks, they obviously don't care for this
compression and use the sparse indices, and therefore try to request the
wrong clocks or clocks that don't exist.
The most straightforward fix here seems to stop being clever with the
packing and just overallocate the array.
Fixes: 2f7ae8ab6aa73 ("clk: microchip: mpfs-ccc: fix out of bounds access during output registration")
Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't provide the fields length explicitly.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271
Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().")
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled array, only its representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519093806.1567914-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271
Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().")
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com
|
|
Add VIRTGPU_PARAM_BLOB_ALIGNMENT as a param that can be read with
VIRTGPU_GETPARAM by userspace applications running in the guest to
obtain the host's page size and find out the right alignment to be used
in shared memory allocations.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-4-slp@redhat.com
|
|
If VIRTIO_GPU_F_BLOB_ALIGNMENT has been negotiated, blob size must be
aligned to blob_alignment. Validate this in verify_blob() so that
invalid requests are rejected early.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-3-slp@redhat.com
|
|
Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device
provides a valid blob_alignment field in its configuration, and that
both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned
to that value.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com
|
|
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data.
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Cc: stable@vger.kernel.org # 2.6.23
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The Cadence XSPI driver uses readq() and writeq(), which are not provided
directly by all 32-bit architectures. Include the generic non-atomic 64-bit
I/O accessor fallback for non-64-bit builds so the driver can build there.
Drop the 64BIT dependency at the same time. The driver only needs MMIO
and the SPI memory interface at build time, and the fallback accessors
cover the 32-bit compile-test case.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260519005614.628437-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivid_update_format_cap/out() if the queue is busy.
I'm 90% certain that this is the cause of this syzbot bug:
https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
But since we never have reproducers, it is hard to be certain. In any case,
these checks are needed regardless.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 73c3f48230cd ("[media] vivid: add the control handling code")
Cc: stable@vger.kernel.org
Reported-by: syzbot+dac8f5eaa46837e97b89@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Don't call vivid_update_format_cap() when switching to/from reduced fps
for HDMI inputs: that will also reset the format, which is overkill for
this.
Make a new vivid_update_reduced_fps() function that just updates the
dev->timeperframe_vid_cap.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: c79aa6aeadb0 ("[media] vivid-capture: add control for reduced frame rate")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The previously applied similar commit 553e26a45e0e ("gpio: Initialize
i2c_device_id arrays using member names") only handled i2c_device_id
arrays that also have an assignment for .driver_data.
For consistency also convert the entries without such an assignment.
Again this is a modification that has no influence on the generated
code, it's only more robust against changes to struct i2c_device_id and
easier to understand for a human.
While touching adnp_i2c_id[] drop the comma after the list terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260520074812.1632512-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The Airoha EN7523 GPIO driver uses generic platform, MMIO, and gpiolib
interfaces. Allow it to build with COMPILE_TEST so it gets coverage on
non-Airoha platforms.
Tested with:
make LLVM=1 ARCH=loongarch drivers/gpio/gpio-en7523.o
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260519005912.628667-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The APM X-Gene GPIO driver uses generic platform, ACPI, MMIO, and gpiolib
interfaces. Allow it to build with COMPILE_TEST, matching the existing
coverage for the X-Gene standby GPIO driver.
Tested with:
make LLVM=1 ARCH=loongarch drivers/gpio/gpio-xgene.o
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260519005958.628783-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
As this device is the "orchestrator" for the rest of the media
pipeline, we need to stop all on-going streams before system suspend and
enable them back when the system wakes up from sleep.
Using .suspend/.resume callbacks does not work, as the order of those
callbacks amongst various devices in the camera pipeline like the sensor,
FPD serdes, CSI bridge etc. is impossible to enforce, even with
device links. For example, the Cadence CSI bridge is a child device of
this device, thus we cannot create a device link with the CSI bridge as
a provider and this device as consumer. This can lead to situations
where all the dependencies for the bridge have not yet resumed when we
request the subdev to start streaming again through the .resume callback
defined in this device.
Instead here we register a notifier callback with the PM framework
which is triggered when the system is fully functional. At this point we
can cleanly stop or start the streams, because we know all other devices
and their dependencies are functional. A downside of this approach is
that the userspace is also alive (not frozen yet, or just thawed), so
the suspend notifier might complete before the userspace has completed
all ioctls, like QBUF/DQBUF/STREAMON/STREAMOFF.
Tested-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add support for runtime power-management to enable powering off the
shared power domain between Cadence CSI2RX and TI CSI2RX wrapper when
the device(s) are not in use.
When powering off the IP, the PSI-L endpoint loses the paired DMA
channels. Thus we have to release the DMA channels at runtime suspend
and request them again at resume.
Tested-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Co-developed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Use runtime power management hooks to save power when CSI-RX is not in
use. Also, shift to goto based error handling in
csi2rx_enable_streams() function
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Tested-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
On buffer starvation the DMA is marked IDLE, and the stale data in the
internal FIFOs gets drained only on the next VIDIOC_QBUF call from the
userspace. This approach works fine for a single stream case.
But in multistream scenarios, buffer starvation for one stream can
block the shared HW FIFO of the CSI2RX IP. This can stall the pipeline
for all other streams, even if buffers are available for them.
This patch introduces a new architecture, that continuously drains data
from the shared HW FIFO into a small (32KiB) buffer if no buffers are made
available to the driver from the userspace. This ensures independence
between different streams, where a slower downstream element for one
camera does not block streaming for other cameras.
Additionally, after we drain for a stream, the next frame will be a
partial frame, as a portion of its data will have already been drained
before a valid buffer is queued by user space to the driver.
Return the partial frame to user space with VB2_BUF_STATE_ERROR.
Use wait for completion barrier to make sure the shared hardware FIFO
is cleared of the data at the end of stream after the source has stopped
sending data.
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
We already make sure to submit all available buffers to DMA in each DMA
completion callback.
Move that logic in a separate function, and use it during stream start
as well, as most application queue all their buffers before stream on.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Co-developed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Each CSI2 stream can be multiplexed into 32 independent streams, each
identified by its virtual channel number and data type. The incoming
data from these streams can be filtered on the basis of either the
virtual channel or the data type.
To capture this multiplexed stream, the application needs to tell
the driver how it wants to route the data. It needs to specify
which context should process which stream. This is done via the
new routing APIs.
Add ioctls to accept routing information from the application and save
that in the driver. This can be used when starting streaming on a
context to determine which route and consequently which virtual channel
it should process.
De-assert the pixel interface reset on first start_streaming() and assert
it on the last stop_streaming().
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Co-developed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Cadence CSI-2 bridge IP supports capturing multiple virtual "streams"
of data over the same physical interface using MIPI Virtual Channels.
While the hardware IP supports usecases where streams coming in the sink
pad can be broadcasted to multiple source pads, the driver will need
significant re-architecture to make that possible. The two users of this
IP in mainline linux are TI Shim and StarFive JH7110 CAMSS, and both
have only integrated the first source pad i.e stream0 of this IP. So for
now keep it simple and only allow 1-to-1 mapping of streams from sink to
source, without any broadcasting.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Co-developed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Use get_frame_desc() to get the frame desc from the connected source,
and use the provided virtual channel and DT instead of defaults.
As we don't support multiple streams yet, we will just always use
stream 0. If the source doesn't support get_frame_desc(), fall back
to the previous method of always capturing virtual channel 0.
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The cdns-csi2rx subdev passes streams through without any
modification
Use v4l2_subdev_get_frame_desc_passthrough() helper and add the
.get_frame_desc op
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Different platforms that use this driver might have different number of
DMA channels allocated for CSI. So only as many DMA contexts can be used
as the number of DMA channels available. Get the number of channels
provided via device tree and only configure that many contexts, and
hence only that many pads.
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The enable_streams() API in v4l2 supports passing a bitmask to enable
each pad/stream combination individually on any media subdev. Use this
API instead of s_stream() API.
Implement the enable_stream and disable_stream hooks in place of the
stream-unaware s_stream hook.
Remove the lock that was used to serialize stream starts/stops which
is not required anymore since the v4l2-core serializes the
enable/disable_streams() calls for the subdev.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
With single stream capture, it was simpler to use the video device as
the media entity representing the main TI CSI2RX device. Now with multi
stream capture coming into the picture, the model has shifted to each
video device having a link to the main device's subdev. The routing
would then be set on this subdev.
Add this subdev, link each context to this subdev's entity and link the
subdev's entity to the source. Also add an array of media pads. It will
have one sink pad and source pads equal to the number of contexts.
Support the new enable_stream()/disable_stream() APIs in the subdev
instead of s_stream() hook.
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
With multiple contexts, there needs to be a different DMA channel for
each context. Earlier, the DMA channel name was hard coded to "rx0" for
the sake of simplicity. Generate the DMA channel name based on its index
and get the channel corresponding to the context.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Currently the SHIM code to configure the context only touches the first
context. Add support for writing to the context's registers based on the
context index.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The TI CSI2RX wrapper has two parts: the main device and the DMA
contexts. The driver was originally written with single camera capture
in mind, so only one DMA context was needed. For the sake of simplicity,
the context specific stuff was not modeled different to the main device.
To enable multiplexed stream capture, the contexts need to be separated
out from the main device. Create a struct ti_csi2rx_ctx that holds the
DMA context specific things. Separate out functions handling the device
and context related functionality.
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
j721e-csi2rx driver has a limitation of frame width being a multiple
word size. However, there is no such limitation imposed by the
hardware [1].
Remove this limitation from the driver.
Link: https://www.ti.com/lit/pdf/spruj16
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Fix some typos, removed superfluous comments/code,
some minor code alignment.
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
