| Age | Commit message (Collapse) | Author |
|---|
|
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Additionally, increase the VCE_V2_0_DATA_SIZE to
have extra space after the VCE handles.
Also increase the data size used for each VCE handle.
The FW needs 23744 bytes, use 24K to be safe.
This fixes VM faults when using VCE 2.
Cc: John Olender <john.olender@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802
Fixes: e98226221467 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VCE1 firmware works slightly differently and is already
loaded by vce_v1_0_load_fw(). It doesn't actually need to
call amdgpu_vce_resume().
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
Fixes: d4a640d4b9f3 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only allocate entries from the GTT manager when the
VCE GTT node is not allocated yet. This prevents the
possibility of allocating them multiple times, which
causes issues during GPU reset and suspend/resume.
Fixes: 71aec08f80e7 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.
When the VCPU BO is already located in a low 32-bit address
in VRAM (eg. when VRAM is mapped to the low address space),
don't do the workaround.
Fixes: 71aec08f80e7 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The same thing is already checked a few lines above.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ensuring the low 32-bit address, make sure it is
less than 128 MiB, otherwise the VCE seems to fail to initialize.
This seems to be an undocumented limitation of the firmware
validation mechanism. Note that in case of VCE1 the BAR
address is zero and we can't change it also due to the
firmware validator.
When programming the mmVCE_VCPU_CACHE_OFFSETn registers,
don't AND them with a mask. This is incorrect because
the register mask is actually 0x0fffffff and useless because
we already ensure the addresses are below the limit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56aa ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak.
Add kfree() and NULL assignment to properly release memory and avoid dangling pointers.
Fixes: 2beedc3a92b7 ("drm/amd/pm: Add initial support for smu v15_0_8");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After suspend/resume sdma_gang is supported on MES 12.1, SDMA queue reset
is supported too.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
suspend_all_sdma_gangs is supported in new MES firmware for gfx 12.1
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_virt_ras_get_batch_records() indexed batchs[] and records[]
from ras_cmd_batch_trace_record_rsp copied out of shared memory without
fully bounding the cache window or per-batch offset/trace_num. A
tampered or corrupted buffer could set real_batch_num past the array,
make a naive start_batch_id + real_batch_num comparison wrap in
uint64_t, or point offset+trace_num past records[].
Add amdgpu_virt_ras_check_batch_cached() for a subtraction-based window
with a real_batch_num cap, re-run it after GET_BATCH_TRACE_RECORD, and
use an explicit batch index into batchs[]. Consolidate batch_id,
trace_num, and offset+trace_num checks; on any failure memset the cache
and return -EIO so the next call refetches.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v3:
improve the coding style.
v2:
use debugfs_create_x64 and debugfs_create_x8 to create node.
v1:
1. Add guest driver CUID support
2. Do not expose vf index(variable "fcn_idx") to customers,
replace the fcn_idx with pad.
Only expose the unitid to customers.
background:
Change fcn_idx to pad, VF index won't expose to guest vm.
Introduce a new unitid field as the VF identifier to replace the VF index:
1).unitid is assigned by the host driver
2).It is delivered to the guest via the pf2vf message
3).The application or umd can retrieve united from the sysfs node
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219c4 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20260518171901.904094-2-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The depends on !UML was added in commit dffe68131707 ("amdgpu: Avoid
building on UML") to work around build failures with allyesconfig on
UML. The original errors were:
- smu7_hwmgr.c: incompatible pointer type 'struct cpuinfo_um *' vs
'struct cpuinfo_x86 *' in intel_core_rkl_chk()
- kfd_topology.c: 'struct cpuinfo_um' has no member named 'apicid'
Both issues have since been resolved independently:
- intel_core_rkl_chk() has been removed entirely.
- kfd_topology.c now uses a proper #ifdef CONFIG_X86_64 guard.
- All other cpuinfo_x86/cpu_data() references in the driver are
guarded by #if IS_ENABLED(CONFIG_X86) or #ifdef CONFIG_X86_64.
Removing this exclusion allows CONFIG_DRM_AMDGPU to be selected on UML,
which in turn enables running KUnit tests (such as amdgpu_dm_crc_test)
under UML without needing a full hardware-capable kernel build.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We encapsulate the logic to check if the platform has L2 flush
optimization feature in xe_device_is_l2_flush_optimized(), but
guc_ctl_feature_flags() is using an open-coded version of that same type
of check. Fix that by replacing the open-coded check with
xe_device_is_l2_flush_optimized().
Reviewed-by: Himanshu Girotra <himanshu.girotra@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20260513-guc-l2-flush-opt-use-xe_device_is_l2_flush_optimized-v1-1-36fa866d6ed8@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
When building for 32-bit platforms, for which 'size_t' is
'unsigned int', there are warnings around using the incorrect format
specifier to print bsize in hid_report_raw_event():
drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
| ~~~
| %zu
2054 | report->id, csize, bsize);
| ^~~~~
drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
| ~~~
| %zu
2076 | report->id, rsize, bsize);
| ^~~~~
Use the proper 'size_t' format specifier, '%zu', to clear up the
warnings.
Cc: stable@vger.kernel.org
Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cache aware scheduling needs to know the LLC size that a process
can use, so as to avoid memory-intensive tasks from being
over-aggregated on a single LLC.
Introduce a preparation patch to add get_effective_llc_bytes() to
get the LLC size that a CPU can use. The function can be further
enhanced by subtracting the LLC cache ways reserved by resctrl
(CAT in Intel RDT, etc).
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Link: https://patch.msgid.link/37afee09ff608034da0ce149e72d33b6f4698edf.1778703694.git.tim.c.chen@linux.intel.com
|
|
If xe_lrc_create() fails, the secondary queue added to the
multi-queue group list is not removed before freeing the
queue. Fix error path handling for secondary queues by
removing it from the multi-queue group list at the right
place.
Reported-by: Sebastian Österlund <sebastian.osterlund@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7979
Fixes: d716a5088c88 ("drm/xe/multi_queue: Handle tearing down of a multi queue")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260518191639.320890-2-niranjana.vishwanathapura@intel.com
|
|
During development, it is useful to see which mailboxes are currently
obtained. Use a seq-file in debugfs to list the currently registered
controllers and their used channels. Example output from a Renesas R-Car
X5H based system:
# cat /sys/kernel/debug/mailbox/mailbox_summary
189e0000.system-controller:
0: c1000000.mailbox_test_send_to_recv
1: c1000100.mailbox_test_recv_to_send
128: c1000100.mailbox_test_recv_to_send
129: c1000000.mailbox_test_send_to_recv
189e1000.system-controller:
4: scmi_dev.1
5: scmi_dev.2
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
If the optional startup() callbacks fails, we need to clear some states.
Currently, this is done by freeing the channel. This does, however, more
than needed which creates problems. Namely, it is calling the shutdown()
callback. This is totally not intuitive. No user expects that shutdown()
is called when startup() fails, similar to remove() not being called
when probe() fails. Currently, quite some mailbox users register the IRQ
in startup() and free them in shutdown(). These drivers will get a WARN
about freeing an already free IRQ. Other subtle issues could arise from
this unexpected behaviour.
To solve this problem, introduce a helper which does the minimal cleanup
and use it in both, in free_channel() and after startup() failed.
Link: https://sashiko.dev/#/patchset/20260402112709.13002-1-wsa%2Brenesas%40sang-engineering.com # second issue
Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
When the mailbox controller failed transmitting message, the error code
was only passed to the client's tx done handler and not to
mbox_send_message() in blocking mode. For this reason, the function could
return a false success. This commit resolves the issue by introducing the
tx status and checking it before mbox_send_message() returns.
This commit works with the premise that the multi-threads' access to a
channel in blocking mode is serialized by clients, not by the mailbox
APIs, since the current mbox_send_message() in blocking mode does not
support multi-threads.
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Unlike in non-blocking mode, multi-thread has not been supported in
blocking mode. This commit is to prevent clients from having wrong
assumption by explicitly specifying this fact to the API doc.
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
When the SOF audio driver fails to initialize (e.g. firmware boot
timeout), its devres unwind frees the snd_sof_dev object that the
mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback.
The mtk-adsp-mailbox shutdown clears the mailbox command registers
but leaves the IRQ line unmasked, so a late interrupt can still
queue a threaded handler after mbox_free_channel() had cleared
chan->cl, and mbox_chan_received_data() would then trigger UAF:
BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version
sof_ipc3_validate_fw_version
sof_ipc3_do_rx_work
sof_ipc3_rx_msg
mt8196_dsp_handle_request
mtk_adsp_ipc_recv
mbox_chan_received_data
mtk_adsp_mbox_isr
irq_thread_fn
Freed by task ...:
kfree
devres_release_all
really_probe
... (sof-audio-of-mt8196 probe failure)
The crash was observed roughly three seconds after the failed probe.
disable_irq() in shutdown and enable_irq() in startup. disable_irq()
also waits for any in-flight interrupts, so by the time
mbox_free_channel() proceeds to clear chan->cl no rx_callback can run.
In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked
between probe and the first client bind — otherwise an early interrupt
can crash on chan->cl == NULL in mbox_chan_received_data().
Fixes: af2dfa96c52d ("mailbox: mediatek: add support for adsp mailbox controller")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Leaving these dead definitions in place hides which registers are
actually being used by the hardware, making the driver harder to read
and maintain. Remove them to clean up the file.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Nord SoC CPUCP mailbox supports 16 IPC channels, compared to 3 on
x1e80100. The existing driver hardcodes the channel count via a
compile-time constant (APSS_CPUCP_IPC_CHAN_SUPPORTED), making it
impossible to support hardware with a different number of channels.
Introduce a qcom_cpucp_mbox_data per-hardware configuration struct that
carries the channel count, and retrieve it via of_device_get_match_data()
at probe time. Switch the channel array from a fixed-size member to a
dynamically allocated buffer sized from the hardware data. Update the
x1e80100 entry to supply its own data struct, and add a new Nord entry
with num_chans = 16.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
mpfs_mbox_inbox_isr() writes to the sysreg scb syscon, not the control
scb syscon, but checks for the presence of the latter. Ultimately this
makes little difference because if one syscon is present, both will be.
Fixes: a4123ffab9ece ("mailbox: mpfs: support new, syscon based, devicetree configuration")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510203128.2884846-1-ashutoshdesai993@gmail.com
|
|
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added missing fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510201733.2882224-1-ashutoshdesai993@gmail.com
|
|
When power control for downstream devices was introduced in the
mediatek-gen3 PCIe controller driver, only the power to the downstream
devices was cut when the controller driver is removed. This matched
existing behavior, but in hindsight a proper power down sequence should
have been followed.
Call mtk_pcie_devices_power_down() on driver removal so that in addition
to removing power from the downstream devices, PERST# is asserted.
Fixes: 1a152e21940a ("PCI: mediatek-gen3: Integrate new pwrctrl API")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260505105918.1823170-1-wenst@chromium.org
|
|
Add a .shutdown() callback to control the timing of PERST# and power during
system shutdown to ensure that PERST# is asserted before power to the
connector is removed, as required by PCIe CEM r6.0, sec 2.2.
Signed-off-by: Jian Yang <jian.yang@mediatek.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260413071401.1151-3-jian.yang@mediatek.com
|
|
Some MediaTek chips stop generating REFCLK if the PCIE_PHY_RSTB signal of
PCIe controller is asserted at the start of mtk_pcie_devices_power_up().
But the driver deasserts PCIE_PHY_RSTB together with PCIE_PE_RSTB signal
that is used to deassert PERST#. This violates PCIe CEM r6.0, sec 2.11.2,
which mandates waiting for 100ms (PCIE_T_PVPERL_MS) after power becomes
stable.
Move the MAC, PHY and BRG reset deassert code above the PCIE_T_PVPERL_MS
delay and leave the PCIE_PE_RSTB deassertion after the delay.
Add the 10ms delay mentioned in the MediaTek datasheet after asserting
PCIE_BRG_RSTB and before accessing the PCIE_RST_CTRL_REG register.
Signed-off-by: Jian Yang <jian.yang@mediatek.com>
[mani: commit log and comments rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260413071401.1151-2-jian.yang@mediatek.com
|
|
Add an entry for the BOE NE120DRM-N28 panel,
used in the Microsoft Surface Pro 12-inch.
The values chosen were tested to be working fine
for wake from sleep and hibernation.
Panel edid:
00 ff ff ff ff ff ff 00 09 e5 c9 0c a0 06 00 07
0a 22 01 04 a5 19 11 78 07 9f 15 a6 55 4c 9b 25
0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 62 53 94 a0 80 b8 2e 50 18 10
3a 00 fe a9 00 00 00 1a 13 7d 94 a0 80 b8 2e 50
18 10 3a 00 fe a9 00 00 00 1a 00 00 00 fd 00 18
5a 5b 88 20 01 0a 20 20 20 20 20 20 00 00 00 fc
00 4e 45 31 32 30 44 52 4d 2d 4e 32 38 0a 00 0a
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/9e749a3a483e4a3c684eac3ee6a4b241c94a0362.1778822464.git.harrison.vanderbyl@gmail.com
|
|
Herve Codina <herve.codina@bootlin.com> says:
On some embedded system boards, audio amplifiers are designed using
discrete components such as op-amp, several resistors and switches to
either adjust the gain (switching resistors) or fully switch the
audio signal path (mute and/or bypass features).
Those switches are usually driven by simple GPIOs.
This kind of amplifiers are not handled in ASoC and the fallback is to
let the user-space handle those GPIOs out of the ALSA world.
In order to have those kind of amplifiers fully integrated in the audio
stack, this series introduces the audio-gpio-amp to handle them.
This new ASoC component allows to have the amplifiers seen as ASoC
auxiliarty devices and so it allows to control them through audio mixer
controls.
In order to ease the review, I choose to split modifications related
to the merge of the gpio-audio-amp part into the simple-amplfier driver
in several commits.
Link: https://patch.msgid.link/20260513081702.317117-1-herve.codina@bootlin.com
|
|
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to clear the DMA channel pointer also if buffer allocation
fails to avoid passing a pointer to the released channel to the DMA
engine (or trying to free the channel a second time on late probe errors
or driver unbind).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: c687c46e9e45 ("spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble")
Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=17
Cc: stable@vger.kernel.org # 4.12
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260512074809.915084-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to check the dma.enabled flag before trying to release the DMA
channels also on late probe errors to avoid dereferencing an error
pointer (or attempting to release a channel a second time).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support")
Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=10
Cc: stable@vger.kernel.org # 5.1
Cc: Lanqing Liu <lanqing.liu@unisoc.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260512074733.915029-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer (or attempting to release a channel
a second time) on later probe errors or driver unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities")
Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=4
Cc: stable@vger.kernel.org # 4.1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260512074334.914735-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some ACPI-based platforms report incorrect IRQ trigger types (e.g.
IRQF_TRIGGER_HIGH), which can lead to interrupt storms.
Use the historically working rising-edge trigger on ACPI systems to
avoid this regression.
Device Tree-based systems continue to use the firmware-provided
trigger type.
Fixes: 57be33f85e36 ("nfc: nxp-nci: remove interrupt trigger type")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Link: https://patch.msgid.link/20260516-nfc-nxp-nci-i2c-restore-irq-trigger-fallback-v3-1-37ba4b6e9086@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>
|
