| Age | Commit message (Collapse) | Author |
|---|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-9-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-8-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-7-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Unlike system level sinks, per-CPU sinks may lose power during CPU idle
states. Currently, this applies specifically to TRBE. This commit
invokes save and restore callbacks for the sink in the CPU PM notifier.
If the sink provides PM callbacks but the source does not, this is
unsafe because the sink cannot be disabled safely unless the source
can also be controlled, so veto low power entry to avoid lockups.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-24-f88c4a3ecfe9@arm.com
|
|
Extend the CPU PM flow to control the path: disable from source up to
the node before the sink, then re-enable the same range on restore.
To avoid latency, control it up to the node before the sink.
Track per-CPU PM restore failures using percpu_pm_failed. Once a CPU
hits a restore failure, set the percpu_pm_failed and return NOTIFY_BAD
on subsequent notifications to avoid repeating half-completed
transitions.
Setting percpu_pm_failed permanently blocks CPU PM on that CPU. Such
failures are typically seen during development; disabling PM operations
simplifies the implementation, and a warning highlights the issue.
Clear this flag when the source device is unregistered.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-23-f88c4a3ecfe9@arm.com
|
|
Since the path pointer is stored in the source's structure, retrieve it
directly when disabling the path.
As a result, the global variables used for caching path pointers are no
longer needed. Remove them to simplify the code.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-22-f88c4a3ecfe9@arm.com
|
|
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-21-f88c4a3ecfe9@arm.com
|
|
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-20-f88c4a3ecfe9@arm.com
|
|
This commit only set the path pointer for system tracers (e.g. STM) in
coresight_{enable|disable}_source().
Later changes will set the path pointer locally for per-CPU sources.
This is because the mode and path pointer must be set together, so that
they are observed atomically by the CPU PM notifier.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-19-f88c4a3ecfe9@arm.com
|
|
Introduce the coresight_enable_source() helper for enabling source
device.
Add validation to ensure the device is a source before proceeding with
further operations.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-18-f88c4a3ecfe9@arm.com
|
|
Replace open code with coresight_path_first_node() and
coresight_path_last_node() for fetching the nodes.
Check that the node is not NULL before accessing csdev field.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-17-f88c4a3ecfe9@arm.com
|
|
CPU PM notifiers need to control only part of a path instead of always
operating on the full path.
Add internal enable and disable helpers that take an inclusive node
range [from, to], validate that the requested nodes are ordered before
using them.
Update the existed coresight_{enable|disable}_path() interfaces as
full-path wrappers by passing the first and last path nodes. The helpers
coresight_path_{first|last}_node() are provided for conveniently
fetching the first and last nodes on the path.
In coresight_enable_path_from_to(), if a failure occurs at the last node
in the range, no device is actually enabled in this case, bail out
directly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-16-f88c4a3ecfe9@arm.com
|
|
coresight_enable_path() enables helpers attached to every device in
the path, including those bound to the source. However,
coresight_disable_path() skips the source node, so source helpers had
to be disabled separately in coresight_disable_source().
Move source helper disabling into coresight_disable_path() instead.
Make coresight_disable_path_from() start from the passed node nd, so
it can also disable helpers on the source. Update the comments
accordingly.
As coresight_disable_path_from() now changes its semantics from
"start beyond nd" to "start from nd", update the failure handling in
coresight_enable_path(). If enabling a node fails, iterate to the
previous node (the last successfully enabled one) and pass it to
coresight_disable_path_from() for rollback.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-15-f88c4a3ecfe9@arm.com
|
|
cscfg_config_sysfs_get_active_cfg() will be used from idle flows, while
sleeping locks are not allowed. Introduce sysfs_store_lock to replace
the mutex to protect sysfs_active_config and sysfs_active_preset
accesses, with IRQ-safe locking to avoid lockdep complaint.
Refactor cscfg_config_sysfs_activate() to use spinlock for
sysfs_active_config and activate/deactivate config.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-14-f88c4a3ecfe9@arm.com
|
|
ETMv4 driver save/restore callbacks still re-check conditions that are
already validated by the core layer before the callbacks are invoked.
Remove the duplicated checks and fold the two-level functions into
direct callback implementations. The obsolete WARN_ON() checks are
removed as well.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-13-f88c4a3ecfe9@arm.com
|
|
Add a helper etm4_pm_save_needed() to detect if need save context for
self-hosted PM mode and hook pm_save_disable() and pm_restore_enable()
callbacks through etm4_cs_pm_ops structure. With this, ETMv4 PM
save/restore is integrated into the core layer's CPU PM.
Organize etm4_cs_ops and etm4_cs_pm_ops together for more readable.
The CPU PM notifier in the ETMv4 driver is no longer needed, remove it
along with its registration and unregistration code.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-12-f88c4a3ecfe9@arm.com
|
|
The current implementation only saves and restores the context for ETM
sources while ignoring the context of links. However, if funnels or
replicators on a linked path resides in a CPU or cluster power domain,
the hardware context for the link will be lost after resuming from low
power states.
To support context management for links during CPU low power modes, a
better way is to implement CPU PM callbacks in the Arm CoreSight core
layer. As the core layer has sufficient information for linked paths,
from tracers to links, which can be used for power management.
As a first step, this patch registers CPU PM notifier in the core layer.
If a source device provides callbacks for saving and restoring context,
these callbacks will be invoked in CPU suspend and resume.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-11-f88c4a3ecfe9@arm.com
|
|
etm_setup_aux() fetches the per-CPU source pointer while preparing perf
AUX trace paths. This can race with CoreSight device unregistration, the
ETM device may has been released while the AUX setup still use it,
leading to use-after-free.
Move per-CPU path construction into etm_event_build_path() and use
the coresight_{get|put}_percpu_source_ref() pairs to take and drop
the device references, this ensures the device is safe to access during
path construction.
Update comments accordingly. Document a PREEMPT_RT corner case: the
put_device() may release resources while coresight_dev_lock (a raw
spinlock) is held, and the release may attempt to acquire a spinlock
that becomes sleepable under PREEMPT_RT. This will be fixed in the
future.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-10-f88c4a3ecfe9@arm.com
|
|
Move the per-CPU source pointer from ETM perf to the core layer, as this
will be used for not only perf session and also for CPU PM notifiers.
Provides coresight_{set|clear|get}_percpu_source() helpers to access the
per-CPU source pointer. Add a raw spinlock to protect exclusive access.
Device registration and unregistration call the set and clear helpers
for init and teardown the pointers.
Update callers to invoke coresight_get_percpu_source() for retrieving
the pointer.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-9-f88c4a3ecfe9@arm.com
|
|
coresight_get_ref() currently pins the provider module and takes a
reference on the parent device, but it does not pin &csdev->dev. Take a
reference on &csdev->dev when grabbing a CoreSight device and drop it in
coresight_put_ref().
Reorder the sequence to follow child-to-parent dependencies: first take
a reference on csdev, then on the parent device and grab the driver
module. Once the data and module are pinned, take a PM runtime
reference to power on the hardware.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-8-f88c4a3ecfe9@arm.com
|
|
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI).
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-7-f88c4a3ecfe9@arm.com
|
|
The hotplug lock is acquired and released in etm{3|4}_disable_sysfs(),
which are low-level functions. This prevents us from a new solution for
hotplug.
Firstly, hotplug callbacks cannot invoke etm{3|4}_disable_sysfs() to
disable the source; otherwise, a deadlock issue occurs. The reason is
that, in the hotplug flow, the kernel acquires the hotplug lock before
calling callbacks. Subsequently, if coresight_disable_source() is
invoked and it calls etm{3|4}_disable_sysfs(), the hotplug lock will be
acquired twice, leading to a double lock issue.
Secondly, when hotplugging a CPU on or off, if we want to manipulate all
components on a path attached to the CPU, we need to maintain atomicity
for the entire path. Otherwise, a race condition may occur with users
setting the same path via the Sysfs knobs, ultimately causing mess
states in CoreSight components.
This patch moves the hotplug locking from etm{3|4}_disable_sysfs() into
enable_source_store(). As a result, when users control the Sysfs knobs,
the whole flow is protected by hotplug locking, ensuring it is mutual
exclusive with hotplug callbacks.
Note, the paired function etm{3|4}_enable_sysfs() does not use hotplug
locking, which is why this patch does not modify it.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-6-f88c4a3ecfe9@arm.com
|
|
The CPU ID can be fetched directly from the coresight_device structure,
so the .cpu_id() callback is no longer needed.
Remove the .cpu_id() callback from source ops and update callers
accordingly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-5-f88c4a3ecfe9@arm.com
|
|
Add a new flag CORESIGHT_DESC_CPU_BOUND to indicate components that
are CPU bound. Populate CPU ID into the coresight_device structure;
otherwise, set CPU ID to -1 for non CPU bound devices.
Use the {0} initializer to clear coresight_desc structures to avoid
uninitialized values.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-4-f88c4a3ecfe9@arm.com
|
|
This commit extracts the allocation and initialization of the coresight
device structure into a separate function to make future extensions
easier.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-3-f88c4a3ecfe9@arm.com
|
|
If a helper fails to be enabled, unwind any helpers that were already
enabled earlier in the loop. This avoids leaving partially enabled
helpers behind.
Fixes: 6148652807ba ("coresight: Enable and disable helper devices adjacent to the path")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-2-f88c4a3ecfe9@arm.com
|
|
In coresight_enable_sysfs(), for non-CPU sources (SOFTWARE, TPDM,
OTHERS), the source device is enabled via coresight_enable_source_sysfs()
before idr_alloc_u32() maps the path. If idr_alloc_u32() fails, the
original code jumped directly to err_source, which only calls
coresight_disable_path() and coresight_release_path(). The source device
was left enabled with an incremented refcnt but no path tracked for it,
leaving the device in an inconsistent state.
Disable the source before jumping to err_source so the enable and path
operations are fully unwound.
Fixes: 5c0016d7b343 ("coresight: core: Use IDR for non-cpu bound sources' paths.")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-1-f88c4a3ecfe9@arm.com
|
|
Indent multiple lines using tabs instead of spaces. Use pr_info() and
avoid continuation logging.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260504081804.3260-5-thorsten.blum@linux.dev
[geert: Correct format specifier for u8 dev->ipl]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260504081804.3260-3-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260424104011.2616970-1-johan@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://patch.msgid.link/20260514124835.108532-2-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Regions with a BO are checked against the BO size, but the SRAM
region is not. The SRAM region doesn't have a BO, but the command stream
region size should be checked against the SRAM size. The job's
"sram_size" isn't useful here because an evil userspace could lie about
the size.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260513185434.1667045-1-robh@kernel.org
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
... to bring it up to date for new changes.
|
|
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6677 2776 64 9517 252d drivers/infiniband/core/cma_configfs.o
After:
=====
text data bss dec hex filename
6901 2552 64 9517 252d drivers/infiniband/core/cma_configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/6acd9c8a79b868b5e541a7e080a6b4b145e4fd4f.1778923041.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Most drivers do this already, but some open-code a memset. Switch
all instances found. qedr_copy_qp_uresp() is already called with
zeroed memory so that memset is redundant.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
All of these are fully initialized so no bugs are being fixed. Add
the missing initializer as a precaution against future changes.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
At some point the response structs were added and rdma-core is using
them, but the kernel was not changed to use them as well. Replace
the open-coded copy with the right struct and ib_respond_udata().
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The Mellanox drivers have a pattern where they compute the response
length they think they need based on what the user asked for, then
blindly write that ignoring the provided size limit on the response
structure.
Drop this and just use ib_respond_udata() which caps the response
struct to the user's memory, which is fine for what mlx5 is doing.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This is another instance of the min() pattern.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
These cases carefully work around 32-bit unpadded structures, but
the min integrated into ib_respond_udata() handles this
automatically. Zero-initialize data that would not have been copied.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Convert the pattern:
ib_copy_to_udata(udata, &resp, sizeof(resp));
Using Coccinelle:
@@
identifier resp;
expression udata;
@@
- ib_copy_to_udata(udata, &resp, sizeof(resp))
+ ib_respond_udata(udata, resp)
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Convert the pattern:
ib_copy_to_udata(udata, &resp, min(sizeof(resp), udata->outlen));
Using Coccinelle:
@@
identifier resp;
expression udata;
@@
- ib_copy_to_udata(udata, &resp, min(sizeof(resp), udata->outlen))
+ ib_respond_udata(udata, resp)
@@
identifier resp;
expression udata;
@@
- ib_copy_to_udata(udata, &resp, min(udata->outlen, sizeof(resp)))
+ ib_respond_udata(udata, resp)
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Use copy_to_user() directly since the data is not being placed in the
udata response memory.
It is unclear why this is trying to do two copies, but leave it alone.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Convert the pattern:
if (udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen))
Using Coccinelle:
virtual patch
virtual context
virtual report
@@
expression udata;
@@
(
- udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
|
- udata->inlen > 0 && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
)
@@
expression udata;
@@
- udata && udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
These cases are already checking for zeroed data that the kernel does
not understand.
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
While being more verbose using a named initializer yields easier to
understand code and doesn't rely on the two hidden zeros in the
PCI_VDEVICE macro.
While at it, also drop the explicit zero in the terminating entry.
This doesn't introduce any changes to the compiled result of the array,
which was confirmed on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507075437.2669363-2-u.kleine-koenig@baylibre.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
