| Age | Commit message (Collapse) | Author |
|---|
|
When adding more debugfs entries, the beacon_info entry becomes not in
order. Move to correct location. Don't change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-10-pkshih@realtek.com
|
|
Fill HE radiotap by PHY status IE-09/IE-10 which contains HE SIG-A/SIG-B
respectively.
The IE-10 may contain two content channels (if bandwidth is larger than
40MHz), and starting address of second content channel can be calculated by
length of first content channel containing up to 15 user fields with 8-byte
alignment.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-9-pkshih@realtek.com
|
|
Fill VHT radiotap by PHY status IE-09 which contains VHT SIG-A.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-8-pkshih@realtek.com
|
|
To implement more fields of HE radiotap, move the code to an individual
function ahead. Not change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-7-pkshih@realtek.com
|
|
The IE-09/IE-10 of PHY status contain SIG-A/SIG-B respectively, so enable
them in monitor mode to have rich information. If the parser detects
length invalid, ignore to reference IE-09/IE-10 to prevent accessing out
of range.
The RTL8922D is generation 2 of PHY status, which doesn't report SIG-B by
IE-10, so not enable it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-6-pkshih@realtek.com
|
|
Both RTL8922A and RTL8922D are WiFi 7 chips, but their IE length of PHY
status are different. Define them accordingly.
Generation 0: WiFi 6 chips
Generation 1: WiFi 7 RTL8922A
Generation 2: WiFi 7 RTL8922D
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-5-pkshih@realtek.com
|
|
The SNIFFER_MODE bit can ignore filter rules, and receive packets to
driver, so set the bit to accept all packets.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-4-pkshih@realtek.com
|
|
Set VHT beamformed bit by PHY status IE-01 report.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-3-pkshih@realtek.com
|
|
The RX desc can report current frame is in AMPDU, but no way point out
if it is a last one in AMPDU. Update AMPDU reference only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260506131000.1706298-2-pkshih@realtek.com
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
wilco_ec event driver.
Fixes: 27d58498f690 ("platform/chrome: wilco_ec: event: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2076666.usQuhbGJ8B@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_tbmc driver.
Fixes: a2676ead257f ("platform/chrome: chromeos_tbmc: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1875121.VLH7GnMWUR@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_privacy_screen driver.
Fixes: d3c2872ae323 ("platform/chrome: Convert ChromeOS privacy-screen driver to platform")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/3357444.5fSG56mABF@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Replace the per-reference frequency offset measurement (which was
redundant with measured-frequency) with a direct read of the DPLL's
delta frequency offset vs its tracked input reference.
The new implementation uses the dpll_df_offset_x register with
ref_ofst=1 via the dpll_df_read_x semaphore mechanism. This
provides 2^-48 resolution (~3.5 fE) and reports the actual
frequency difference between the DPLL and its active input.
Switch supported_ffo from DPLL_FFO_PORT_RXTX_RATE to
DPLL_FFO_PIN_DEVICE so FFO is reported only in the per-parent
context for the active input pin.
Use atomic64_t for freq_offset to prevent torn reads on 32-bit
architectures between the periodic worker and netlink callbacks.
Rewrite ffo_check to compare the cached df_offset converted to PPT
instead of using the old per-reference measurement. Remove the
ref_ffo_update periodic measurement and the ref ffo field since
they are no longer needed.
Changes v3 -> v4:
- Switch to DPLL_FFO_PIN_DEVICE, remove dpll=NULL guard
- Use atomic64_t for freq_offset (torn read on 32-bit)
Reviewed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260511155816.99936-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add both fractional-frequency-offset (PPM) and
fractional-frequency-offset-ppt (PPT) attributes to the
pin-parent-device nested attribute set, alongside the existing
top-level pin attributes. Both carry the same measurement at
different precisions.
Introduce enum dpll_ffo_type and struct dpll_ffo_param to
distinguish FFO contexts: DPLL_FFO_PORT_RXTX_RATE for the RX vs
TX symbol rate offset reported at the top level, and
DPLL_FFO_PIN_DEVICE for the pin vs parent DPLL offset reported
in the pin-parent-device nest.
Add a supported_ffo bitmask to struct dpll_pin_ops so drivers
declare which FFO types they support. The core only calls ffo_get
for types the driver has opted into, eliminating the need for
per-driver NULL pointer guards. Validate at pin registration time
that supported_ffo is not set without an ffo_get callback.
Update mlx5 (DPLL_FFO_PORT_RXTX_RATE) and zl3073x
(DPLL_FFO_PORT_RXTX_RATE) drivers to use the new API.
Add documentation for both FFO types to dpll.rst.
Changes v3 -> v4:
- Replace dpll=NULL overloading with enum dpll_ffo_type and
struct dpll_ffo_param (Jakub Kicinski)
- Add supported_ffo opt-in bitmask in dpll_pin_ops for fail-close
driver validation (Jakub Kicinski)
- Add WARN_ON in dpll_pin_register for supported_ffo without
ffo_get callback
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260511155816.99936-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When updating the driver to match latest datasheet to suspend access to
URAM when suspending DMA transfers a corner-case was missed, URAM access
will not be suspended if WoL is enabled. This lead to the error message
(correctly) being triggered as URAM access is not suspended even tho
it's requested as part of stopping DMA.
Avoid checking if URAM access is suspended and printing the error
message if WoL is enabled when we suspend the system, as we know it will
not be.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWnjV%3DHGE1o08zLhUfTgOSene5fYx1J5GG10mB%2BToq8qg@mail.gmail.com/
Fixes: 353d8e7989b6 ("net: ethernet: ravb: Suspend and resume the transmission flow")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add chip info entry for the Realtek RTL8367SB switch. This device has
chip ID 0x6367 and version 0x0010. It exposes two external interfaces:
port 6 supports MII, TMII, RMII, RGMII, SGMII and HSGMII, while port 7
supports MII, TMII, RMII and RGMII. Use the existing 8365MB-VC jam table
for initialization.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://patch.msgid.link/3c6d822b-0e85-4173-86ba-2badb140bbf1@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by one
the PCI_DEVICE macros and then list expressions. The latter isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse.
Also use PCI_DEVICE* helper macros to assign .vendor, .device,
.subvendor and .subdevice where appropriate and skip explicit
assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2)
Reviewed-by: Michael Grzeschik <mgr@kernel.org>
Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With .class_mask being zero the value of .class doesn't matter because
to check if a pci_device_id entry matches a given device the expression
(id->class ^ dev->class) & id->class_mask
is checked for being zero (see pci_match_one_device()). So drop the
useless and irritating assignment for .class to match what (I think) all
other drivers are doing that don't need to match on .class, i.e. set
both members to zero.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260511090023.1634387-5-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report PCS receive error counts for all supported PEF 7061, 7071, 7072 and
xRX200 PHYs.
Accumulate the vendor-specific PHY_ERRCNT read-clear counter
(SEL=RXERR) in .update_stats() and expose it as both IEEE 802.3
SymbolErrorDuringCarrier and generic rx_errors via
.get_phy_stats().
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509205933.3965832-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace "22E" with "22F" in the description.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509210900.3968447-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Danilo Krummrich <dakr@kernel.org> says:
When drvdata() was introduced in commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()"), its commit message already noted that a direct accessor to
the driver's bus device private data is not commonly required -- bus callbacks
provide access through &self, and other entry points (IRQs, workqueues, IOCTLs,
etc.) carry their own private data.
The sole motivation for drvdata() was inter-driver interaction, e.g. a parent
driver deriving its bus device private data from the child driver via the
auxiliary bus.
However, drvdata() exposes the driver's bus device private data beyond the
driver's own scope. This creates ordering constraints -- drvdata may not be set
yet when the first caller of drvdata() can appear -- and forces the driver's bus
device private data to outlive all registrations that access it; a requirement
that causes unnecessary complications.
Private data should be private to the entity that issues it; bus device private
data belongs to bus callbacks, class device private data to class callbacks, IRQ
private data to the IRQ handler, etc.
This series replaces drvdata() with a dedicated registration_data pointer on
struct auxiliary_device. The parent stores its private data explicitly during
registration; the data is private to the registration and lives as long as the
Registration object.
On teardown, Registration::drop() first triggers auxiliary_device_delete()
(unbinding the child), then frees the registration data. Ordering constraints
are structural -- the child's lifecycle is scoped to the registration by
construction, not by convention.
With no remaining use case for drvdata(), drvdata(), match_type_id(),
set_type_id() and struct driver_type are removed.
This is a prerequisite for [1], which builds on the removal of drvdata() to
enable Higher-Ranked Lifetime Types (HRT) for Rust device drivers.
[1] https://lore.kernel.org/driver-core/20260427221155.2144848-1-dakr@kernel.org/
Link: https://patch.msgid.link/20260505152400.3905096-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Fixes: 90869ddfefeb ("net: aquantia: Implement pci shutdown callback")
Cc: stable@vger.kernel.org
Signed-off-by: Zoran Ilievski <goodboy@rexbytes.com>
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Link: https://patch.msgid.link/20260511064002.1857-1-goodboy@rexbytes.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not allow SYS_MEM_LAT_MEASURE_EN bit to be set in SYS_MEM_LAT_MEASURE
register. Doing so can cause memory corruption.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-5-ashutosh.dixit@intel.com
|
|
Add val arg to xe_oa_is_valid_config_reg so that register values can also
be verified, in addition to register address. Value verification is needed
to implement MERTOA Wa_14026779378.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-4-ashutosh.dixit@intel.com
|
|
Wa_14026746987 implies that only XE_OAM_FORMAT_MPEC8u32_B8_C8 and not
XE_OAM_FORMAT_MPEC8u64_B8_C8 can be supported for MERTOA unit.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-3-ashutosh.dixit@intel.com
|
|
Minor refactor of oa_unit_supports_oa_format to implement Wa_14026746987.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-2-ashutosh.dixit@intel.com
|
|
The ECRC (TLP digest) workaround was originally applied only for DesignWare
core version 4.90a. Per discussion in Synopsys case, the dependency of the
iATU TD bit on ECRC generation was removed in 5.10a, so apply the
workaround for all DWC versions below that release.
Replace the misleading comment that referred to raw version constants
with readable DesignWare release name to help readability.
Fixes: b210b1595606 ("PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: corrected fixes tag format]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260410062507.657453-1-mmaddireddy@nvidia.com
|
|
The CMN PLL in IPQ5332 SoC produces different output clocks when compared
to IPQ9574. While most clock outputs match IPQ9574, the ethernet PHY/switch
(50 Mhz) and PPE clocks (200 Mhz) in IPQ5332 are different.
Add IPQ5332-specific clock definitions and of_device_id entry.
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-3-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clk_cmn_pll_recalc_rate() function must account for the reference clock
divider programmed in CMN_PLL_REFCLK_CONFIG. Without this fix, platforms
with a reference divider other than 1 calculate incorrect CMN PLL rates.
For example, on IPQ5332 where the reference divider is 2, the computed rate
becomes twice the actual output.
Read CMN_PLL_REFCLK_DIV and divide the parent rate by this value before
applying the 2 * FACTOR scaling. This yields the correct rate calculation:
rate = (parent_rate / ref_div) * 2 * factor.
Maintain backward compatibility with earlier platforms (e.g. IPQ9574,
IPQ5424, IPQ5018) that use ref_div = 1.
Fixes: f81715a4c87c ("clk: qcom: Add CMN PLL clock controller driver for IPQ SoC")
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-1-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DP1000 SoC PCIe Root Complex driver.
The controller only supports 32-bit aligned configuration space accesses.
Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com>
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
[mani: changed to builtin_platform_driver() to prevent irqchip removal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: squash MAINTAINERS update here]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260427-ultrarisc-pcie-v4-3-98935f6cdfb5@ultrarisc.com
|
|
Thermal governors are only unregistered in the thermal_init() error
path and they actually are only deleted from thermal_governor_list.
Put the entire code needed to do that to thermal_unregister_governors()
and rearrange thermal_init() to call that function also when
thermal_register_governors() returns an error.
This allows thermal_unregister_governor() to be dropped
and thermal_register_governor() that is only called by
thermal_register_governors() can be made static __init, so the
headers of these two functions can be dropped from thermal_core.h.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9615355.CDJkKcVGEf@rafael.j.wysocki
|
|
Since thermal_register_governor() is only called by
thermal_register_governors() which runs before clearing
thermal_class_unavailable, thermal_tz_list is guaranteed to be
empty when it runs, so the code walking that list in it is
effectively dead.
The same observation applies to the code walking thermal_tz_list
in thermal_unregister_governor() which is also called only if
thermal_class_unavailable hasn't been cleared.
Remove the dead code from both functions mentioned above and rearrange
thermal_register_governor() to reduce indentation level.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3950489.kQq0lBPeGt@rafael.j.wysocki
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
asus_atk0110 hwmon driver.
Fixes: ee1752590733 ("hwmon: (asus_atk0110) Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2261594.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
acpi_power_meter hwmon driver.
Fixes: afc6c4aedea5 ("hwmon: (acpi_power_meter) Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5068745.GXAFRqVoOG@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
atlas_btns driver.
Fixes: b8303880b641 ("Input: atlas - convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8696590.T7Z3S40VBb@rafael.j.wysocki
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
Xen variant of the ACPI processor aggregator device (PAD) driver.
Fixes: 112b2f978afe ("ACPI: PAD: xen: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/3427762.aeNJFYEL58@rafael.j.wysocki
|
|
The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to
(re)mapping beyond the VMA if the BO is too large. This can cause use
after free issues when munmap() unmaps only the VMA region and not the
additional mappings. To prevent this, check the remaining size of the
VMA before remapping and truncate the remapped length if sg->length is
too large.
Reported-by: Lukas Maar <lukas.maar@tugraz.at>
Fixes: ff13be830333 ("accel/qaic: Add datapath")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: fix braces from checkpatch --strict]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260430193858.1178641-1-zachary.mckevitt@oss.qualcomm.com
|
|
Consolidate the two-element allocation into a single allocation using a
flexible array member. This reduces memory fragmentation and simplifies
the error path by eliminating the need to check for allocation failure
between the two allocations.
Add __counted_by for runtime bounds checking.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401220643.12802-1-rosenp@gmail.com
|
|
Add product IDs (PIDs) for several newer Logitech Bluetooth keyboards
to the hidpp_devices matching table, enabling full HID++ support for
them.
The added keyboards are:
- Logitech Signature K650 & B2B
- Logitech Pebble Keys 2 K380S
- Logitech Casa Pop-Up Desk & B2B
- Logitech Wave Keys & B2B
- Logitech Signature Slim K950 & B2B
- Logitech MX Keys S & B2B
- Logitech Keys-To-Go 2
- Logitech Pop Icon Keys
- Logitech MX Keys Mini & B2B
- Logitech Signature Slim Solar+ K980 B2B
- Logitech Bluetooth Keyboard K250/K251
- Logitech Signature Comfort K880 & B2B
Signed-off-by: Alain Michaud <alainmichaud@google.com>
Reviewed-by: Olivier Gay <ogay@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
These two panels are found in MT8195 Dojo, a.k.a. the HP Chromebook
x360 13b-ca0xxx laptop.
Only the BOE entry was tested on an actual device. The AUO entry is
solely based on the provided datasheet.
raw EDIDs:
AUO B133HAN06.6 (from the datasheet)
00 ff ff ff ff ff ff 00 06 af 8f cb 00 00 00 00
2f 1d 01 04 95 1d 11 78 03 93 05 92 58 59 90 29
1d 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
3e 00 25 a5 10 00 00 18 b8 24 80 b8 70 38 24 40
10 10 3e 00 25 a5 10 00 00 18 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
00 10 48 ff 0f 3c 7d 14 0e 1d 7d 20 20 20 00 77
BOE NV133FHM-N4F V8.0 (from an actual panel)
00 ff ff ff ff ff ff 00 09 e5 25 0a 00 00 00 00
2c 1f 01 04 95 1d 11 78 03 28 65 97 59 54 8e 27
1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 a4 39 80 c8 70 38 50 40 30 20
36 00 26 a5 10 00 00 1a 6d 26 80 c8 70 38 50 40
30 20 36 00 26 a5 10 00 00 1a 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
00 0d 40 ff 0a 3c 7d 0f 0f 1f 7d 00 00 00 00 d2
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260512045454.1505733-1-wenst@chromium.org
|
|
Rescaling values close to the max (U16_MAX) temporarily creates values
that exceed the s32 range. This caused value overflow in case when, for
example, a periodic effect phase was higer than 180 degrees. In turn,
rescale function could return values outised of the logical range of the
HID field.
Fix by using 64 bit signed integer to store the value during calculation
but still return only 32 bit integer.
Closes: https://github.com/JacKeTUs/universal-pidff/issues/116
Fixes: 224ee88fe395 ("Input: add force feedback driver for PID devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The BLTP7853 I2C HID touchpad may fail to probe after reboot or
reprobe because reset completion is not signalled to the host. The
driver then waits for the reset-complete interrupt until it times out
and the device probe fails:
i2c_hid i2c-BLTP7853:00: failed to reset device.
i2c_hid i2c-BLTP7853:00: can't add hid device: -61
i2c_hid: probe of i2c-BLTP7853:00 failed with error -61
Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for the device so i2c-hid does
not wait for a reset interrupt that may never arrive.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
hammer_probe() starts the HID hardware before registering the devres
action that stops it. If devm_add_action() fails, probe returns an
error with the hardware still started because the cleanup action was
never registered and the driver's remove callback is not called after a
failed probe.
Use devm_add_action_or_reset() so the stop action runs immediately on
registration failure while preserving the existing devres-managed cleanup
path for later probe failures and remove.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer".
Fixes: 93a0fc489481 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar")
Cc: stable@vger.kernel.org
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in
appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to
both the probe close_hw error path and appletb_kbd_remove(), but the
way it was wired in left the inactivity timer reachable during driver
tear-down via two distinct windows.
Window A -- put_device() before timer_delete_sync():
put_device(&kbd->backlight_dev->dev);
timer_delete_sync(&kbd->inactivity_timer);
The inactivity_timer softirq reads kbd->backlight_dev and calls
backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a
concurrent hid_appletb_bl unbind drops the last devm reference
between these two calls, the backlight_device is freed and the
mutex_lock() touches freed memory.
Window B -- backlight cleanup before hid_hw_stop():
if (kbd->backlight_dev) {
timer_delete_sync(...);
put_device(...);
}
hid_hw_close(hdev);
hid_hw_stop(hdev);
Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run
afterwards, so a late ".event" callback from the HID core (USB URB
completion on real Apple hardware) can arrive after
timer_delete_sync() drained the softirq but before put_device() drops
the reference. That callback reaches reset_inactivity_timer(), which
calls mod_timer() and re-arms the timer. The freshly re-armed timer
can then fire on the about-to-be-freed backlight_device.
Both windows produce the same KASAN slab-use-after-free:
BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0
Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0
Call Trace:
<IRQ>
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
handle_softirqs
Allocated by task N:
devm_backlight_device_register
appletb_bl_probe
Freed by task M:
(concurrent hid_appletb_bl unbind path)
Close both windows at once by reworking the tear-down in
appletb_kbd_remove() and in the probe close_hw error path so that
1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup,
guaranteeing no further .event callback can fire and re-arm the
timer, and
2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync()
runs before put_device(), so the softirq is drained before the
final reference is dropped.
Fixes: 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe")
Cc: stable@vger.kernel.org
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds attribute for setting the rumble intensity level. This setting must
be re-applied after the gamepad mode is set as doing so resets this to
the default value.
Reviewed-by: Zhouwang Huang <honjow311@gmail.com>
Tested-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds button mapping interface for second generation OneXPlayer
configuration HID interfaces. This interface allows the MCU to swap
button mappings at the hardware level. The current state cannot be
retrieved, and the mappings may have been modified in Windows prior, so
we reset the button mapping at init and expose an attribute to allow
userspace to do this again at any time.
The interface requires two pages of button mapping data to be sent
before the settings will take place. Since the MCU requires a 200ms
delay after each message (total 400ms for these attributes) use the same
debounce work queue method we used for RGB. This will allow for
userspace or udev rules to rapidly map all buttons. The values will
be cached before the final write is finally sent to the device.
Reviewed-by: Zhouwang Huang <honjow311@gmail.com>
Tested-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds "gamepad_mode" attribute to second generation OneXPlayer
configuration HID devices. This attribute initiates a mode shift in the
device MCU that puts it into a state where all events are routed to an
hidraw interface instead of the xpad evdev interface. This allows for
debugging the hardware input mapping added in the next patch.
Reviewed-by: Zhouwang Huang <honjow311@gmail.com>
Tested-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
