| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes the incorrect force-feedback check in sony_suspend(),
without this the check will always be true due to checking a constant
define that is never 0.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove an unneeded goto statement in hotkey_kthread(). Since
the function has a single exit location with no cleanup code,
the jump provides no benefit. Per the kernel coding style,
returning directly is preferred over goto in such case [1].
[1] https://www.kernel.org/doc/html/latest/process/coding-style.html
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Tested-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260425063936.9360-1-eduardo@eduardovasconcelos.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The lpc_ich MFD driver now exposes the software node associated with the
its GPIO controller cell. Remove the dummy software node from the
meraki-mx100 driver and reference the real one instead.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-meraki-swnodes-v5-1-ad91cd306472@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
strcpy() has been deprecated¹ because it performs no bounds checking on
the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
¹ https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260424075755.305770-3-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Fixes: 64b3d8b1b0f5 ("iio: chemical: scd30: add core driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver acquired the ADC clock with devm_clk_get() and read its
rate, but never called clk_prepare_enable(). The probe error path and
npcm_adc_remove() both called clk_disable_unprepare() unconditionally,
causing the clk framework's enable/prepare counts to underflow on
probe failure or module unbind.
The issue went unnoticed because NPCM BMC firmware leaves the ADC
clock enabled at boot, so the driver happened to work in practice.
Switch to devm_clk_get_enabled() so the clock is properly enabled
during probe and automatically released by the device-managed
cleanup, and drop the now-redundant clk_disable_unprepare() from
both the probe error path and remove().
While at it, drop the duplicate error message on devm_request_irq()
failure since the IRQ core already logs it.
Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
When Common Clock Framework is disabled, clk_get_rate() returns 0.
This is used as part of the divisor to perform nanosecond delays
with help of ndelay(). When the above condition occurs the compiler,
due to unspecified behaviour, is free to do what it wants to. Here
it saturates the value, which is logical from mathematics point of
view. However, the ndelay() implementation has set a reasonable
upper threshold and refuses to provide anything for such a long
delay. That's why code may not be linked under these circumstances.
To solve the issue, provide a wrapper that calls ndelay() when
the value is known not to be zero.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603311958.ly6uROit-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The function iio_multiply_value returns IIO_VAL_INT (1) on success or a
negative error number on failure, while iio_read_channel_processed_scale
should return an error code or 0. This creates a situation where the
expected result is treated as an error. Fix this by checking the
iio_multiply_value result separately, instead of passing it as a return
value.
Fixes: 05f958d003c9 ("iio: Improve iio_read_channel_processed_scale() precision")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero to the sampling_frequency sysfs
attribute triggers a division by zero in the kernel.
Fixes: 089a41985c6c ("staging: iio: adis16260 digital gyro driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad4695_enter_advanced_sequencer_mode() was called after
spi_offload_trigger_enable(). That is wrong because
ad4695_enter_advanced_sequencer_mode() issues regular SPI transfers to
put the ADC into advanced sequencer mode, and not all SPI offload capable
controllers support regular SPI transfers while offloading is enabled.
Fix this by calling ad4695_enter_advanced_sequencer_mode() before
spi_offload_trigger_enable(), so the ADC is fully configured before the
first CNV pulse can occur. This is consistent with the same constraint
that already applies to the BUSY_GP_EN write above it.
Update the error unwind labels accordingly: add err_exit_conversion_mode
so that a failure of spi_offload_trigger_enable() correctly exits
conversion mode before clearing BUSY_GP_EN.
Fixes: f09f140e3ea8 ("iio: adc: ad4695: Add support for SPI offload")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver calls i2c_new_dummy_device() to create a dummy device,
then calls i2c_smbus_write_byte(). If i2c_smbus_write_byte() fails and
returns, the cleanup via devm_add_action_or_reset() was never registered,
so the dummy device leaks.
Switch to devm_i2c_new_dummy_device() which registers cleanup atomically
with device creation, eliminating the error-path window.
Fixes: 7501bff87c3e ("iio: light: veml6070: add action for i2c_unregister_device")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
mhz19b_receive_buf() appends each serdev chunk into the fixed
MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without
checking that the chunk fits in the remaining space. A large callback
can therefore overflow st->buf before the command path validates the
reply.
Reset the reply state before each command and reject oversized serial
replies before copying them into the fixed buffer. When an oversized
reply is detected, wake the waiter and report -EMSGSIZE instead of
overwriting st->buf.
Fixes: 4572a70b3681 ("iio: chemical: Add support for Winsen MHZ19B CO2 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Gyeyoung Baek <gye976@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
xadc_postdisable() unconditionally sets the sequencer to continuous
mode. For dual external multiplexer configurations this is incorrect:
simultaneous sampling mode is required so that ADC-A samples through
the mux on VAUX[0-7] while ADC-B simultaneously samples through the
mux on VAUX[8-15]. In continuous mode only ADC-A is active, so
VAUX[8-15] channels return incorrect data.
Since postdisable is also called from xadc_probe() to set the initial
idle state, the wrong sequencer mode is active from the moment the
driver loads.
The preenable path already uses xadc_get_seq_mode() which returns
SIMULTANEOUS for dual mux. Fix postdisable to do the same.
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Christofer Jonason <christofer.jonason@guidelinegeo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Salih Erim <salih.erim@amd.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This reverts commit 707610bcccbd0327530938e33f3f33211a640a4e.
platform_device_register() is going to be fixed instead.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path.
Cc: stable@vger.kernel.org
Fixes: 5895e70f2e6e ("IB/mlx5: Allocate resources just before first QP/SRQ is created")
Link: https://patch.msgid.link/r/SYBPR01MB7881E1E0970268BD69C0BA75AF2B2@SYBPR01MB7881.ausprd01.prod.outlook.com
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add basic remoteproc support for the i.MX94 M-core processors, including
address translation tables(dev addr is from view of remote processor,
sys addr is from view of main processor) and device configuration data for
the CM70, CM71, and CM33S cores.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260427-imx943-rproc-v4-3-68d7c7253acd@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Cortex-M[7,33] processors use a fixed reset vector table format:
0x00 Initial SP value
0x04 Reset vector
0x08 NMI
0x0C ...
...
IRQ[n]
In ELF images, the corresponding layout is:
reset_vectors: --> hardware reset address
.word __stack_end__
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
...
.word UART_IRQHandler
.word SPI_IRQHandler
...
Reset_Handler: --> ELF entry point address
...
The hardware fetches the first two words from reset_vectors and populates
SP with __stack_end__ and PC with Reset_Handler. Execution proceeds from
Reset_Handler.
However, the ELF entry point does not always match the hardware reset
address. For example, on i.MX94 CM33S:
ELF entry point: 0x0ffc211d
hardware reset base: 0x0ffc0000 (default reset value, sw programmable)
Current driver always programs the reset vector as 0. But i.MX94 CM33S's
default reset base is 0x0ffc0000, so the correct reset vector must be
passed to the SM API; otherwise the M33 Sync core cannot boot successfully.
rproc_elf_get_boot_addr() returns the ELF entry point, which is not the
hardware reset vector address. Fix the issue by deriving the hardware reset
vector locally using a SoC-specific mask:
reset_vector = rproc->bootaddr & reset_vector_mask
The ELF entry point semantics remain unchanged. The masking is applied only
at the point where the SM reset vector is programmed.
Add reset_vector_mask = GENMASK_U32(31, 16) to the i.MX95 M7 configuration
so the hardware reset vector is derived correctly. Without this mask, the
SM reset vector would be programmed with an unaligned ELF entry point and
the M7 core would fail to boot.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260427-imx943-rproc-v4-2-68d7c7253acd@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero.
Cc: stable@vger.kernel.org
Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service")
Link: https://patch.msgid.link/r/20260418162141.3610201-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs.
Cc: stable@vger.kernel.org
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://patch.msgid.link/r/20260414111555.3386793-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current teardown logic for dd->pio_map and dd->sdma_map frees the
structures while they might still be accessed by RCU readers. Although the
pointer is nulled under a spinlock, the memory is reclaimed before waiting
for the grace period to end.
This patch fixes the sequence by:
1. Extracting the pointer under the lock.
2. Clearing the RCU-protected pointer.
3. Waiting for readers to finish with synchronize_rcu().
4. Finally freeing the memory.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://patch.msgid.link/r/20260206050836.5890-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Table 7-121 in datasheet says we have to set register 0xc6
to value 0x10 before CLK_O_SEL can be modified. No more infos
about this field found in datasheet. With this fix, setting
of CLK_O_SEL field in IO_MUX_CFG register worked through dts
property "ti,clk-output-sel" on a DP83869HMRGZR.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy")
Link: https://patch.msgid.link/20260425031339.3318-1-hs@nabladev.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260410091633.2822-6-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The buffer parameters in populate_{security,string}_buffer() and
call_{biosattributes,password}_interface() are raw byte buffers, not
character strings - use 'u8 *' instead of 'char *' to reflect this.
Update the local buffer variables at the call sites and in
populate_security_buffer() accordingly.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260410091633.2822-4-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Remove the SCLP_OFB Kconfig option and enable the guarded code
unconditionally. This guards only a few lines of code, so the impact is
very low while at the same time this reduces the large number of Kconfig
options.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Replace the md_default_group and md_attr_groups with
ATTRIBUTE_GROUPS().
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-4-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Replace direct checks on mddev->gendisk with mddev_is_dm() in
md_handle_request() and md_run().
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
The wait loop is equivalent to wait_event_idle(); use it to improve
readability.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-2-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Add a real none bitmap backend that exposes the common bitmap sysfs
group and use it to keep bitmap/location available when an array has no
bitmap.
Then switch the bitmap location sysfs path to move only between none
and the classic bitmap backend, using the no-sysfs bitmap helpers while
merging or unmerging the internal bitmap sysfs group.
This restores mdadm --grow bitmap addition through bitmap/location.
Fixes: fb8cc3b0d9db ("md/md-bitmap: delay registration of bitmap_ops until creating bitmap")
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/r/20260425024615.1696892-4-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Split the classic bitmap sysfs files into a common bitmap group with
the location attribute and a separate internal bitmap group for the
remaining files.
At the same time, convert bitmap operations from a single sysfs group
to a sysfs group array so backends can share part of their sysfs
layout while adding backend-specific attributes separately.
Switch the bitmap sysfs helpers to use sysfs_update_groups() for the
add and update path, and remove groups in reverse order so shared named
groups are unmerged before the last group removes the directory.
Also make bitmap operation lookup depend only on the currently selected
bitmap id matching the installed backend. This prepares the lookup path
for a later registered none backend.
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/r/20260425024615.1696892-3-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Factor bitmap creation and destruction into helpers that do not touch
bitmap sysfs registration.
This prepares the bitmap sysfs rework so callers such as the sysfs
bitmap location path can create or destroy a bitmap backend without
coupling that to sysfs group lifetime management.
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/r/20260425024615.1696892-2-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
This keeps mddev locking consistent and ensures that any future changes
to locking behavior are done through the wrapper.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/r/20260415140319.376578-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
The wait loop is equivalent to wait_event() and can be simplified by
usaing it for improving readability.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/r/20260415140319.376578-2-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero.
Fixes: 475901aff158 ("MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://lore.kernel.org/linux-raid/SYBPR01MB7881A5E2556806CC1D318582AF232@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
BLK_STS_INVAL indicates the IO request itself was invalid, not that the
device has failed. When raid1 treats this as a device error, it retries
on alternate mirrors which fail the same way, eventually exceeding the
read error threshold and removing the device from the array.
This happens when stacking configurations bypass bio_split_to_limits()
in the IO path: dm-raid calls md_handle_request() directly without going
through md_submit_bio(), skipping the alignment validation that would
otherwise reject invalid bios early. The invalid bio reaches the
lower block layers, which fail the bio with BLK_STS_INVAL, and raid1
wrongly interprets this as a device failure.
Add BLK_STS_INVAL to raid1_should_handle_error() so that invalid IO
errors are propagated back to the caller rather than triggering device
removal. This is consistent with the previous kernel behavior when
alignment checks were done earlier in the direct-io path.
Fixes: 5ff3f74e145adc7 ("block: simplify direct io validity check")
Reported-by: Tomáš Trnka <trnka@scm.com>
Closes: https://lore.kernel.org/linux-block/2982107.4sosBPzcNG@electra/
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Tomáš Trnka <trnka@scm.com>
Link: https://lore.kernel.org/r/20260416140345.3872265-1-kbusch@meta.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
If make_stripe_request() returns STRIPE_WAIT_RESHAPE,
raid5_make_request() will free the cloned bio. But raid5_make_request()
can call make_stripe_request() multiple times, writing to the various
stripes. If that bio got added to the toread or towrite lists of a
stripe disk in an earlier call to make_stripe_request(), then it's not
safe to just free the bio if a later part of it is found to cross the
reshape position. Doing so can lead to a UAF error, when bio_endio()
is called on the bio for the earlier stripes.
Instead, raid5_make_request() needs to wait until all parts of the bio
have called bio_endio(). To do this, bios that cross the reshape
position while the reshape can't make progress are flagged as needing to
wait for all parts to complete. When raid5_make_request() has a bio that
failed make_stripe_request() with STRIPE_WAIT_RESHAPE, it sets
bi->bi_private to a completion struct and waits for completion after
ending the bio. When the bio_endio() is called for the last time on a
clone bio with bi->bi_private set, it wakes up the waiter. This
guarantees that raid5_make_request() doesn't return until the cloned bio
needing a retry for io across the reshape boundary is safely cleaned up.
There is a simple reproducer available at [1]. Compile the kernel with
KASAN for more useful reporting when the error is triggered (this is not
necessary to see the bug).
[1] https://gist.github.com/bmarzins/e48598824305cf2171289e47d7241fa5
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20260408043548.1695157-1-bmarzins@redhat.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Remove duplicate inclusion of linux/module.h in fb_defio.c to clean up
redundant code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, mctp_i2c_get_tx_flow_state() is called before the packet length
sanity check. This function marks a new flow as active in the MCTP core.
If the sanity check fails, mctp_i2c_xmit() returns early without calling
mctp_i2c_lock_nest(). This results in a mismatched locking state: the
flow is active, but the I2C bus lock was never acquired for it.
When the flow is later released, mctp_i2c_release_flow() will see the
active state and queue an unlock marker. The TX thread will then
decrement midev->i2c_lock_count from 0, causing it to underflow to -1.
This underflow permanently breaks the driver's locking logic, allowing
future transmissions to occur without holding the I2C bus lock, leading
to bus collisions and potential hardware hangs.
Move the mctp_i2c_get_tx_flow_state() call to after the length sanity
check to ensure we only transition the flow state if we are actually
going to proceed with the transmission and locking.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260423074741.201460-1-william@wkennington.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, VRR is not implmented for DP branch devices.
So skip sending AS SDP for them.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260424090942.3060291-4-ankit.k.nautiyal@intel.com
|
|
Add a helper that determines whether AS SDP can be used for the
current DP configuration. For now this is true only when the sink
supports AS SDP and VRR is enabled, but more conditions may be added
later.
v2:
- Rename to intel_dp_needs_as_sdp(). (Ville)
- Add a #FIXME documenting non-atomic of DP SDP updates. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260424090942.3060291-3-ankit.k.nautiyal@intel.com
|
|
Currently we do not support VRR with HDMI so skip vrr compute
config step for all DP branch devices.
v2: Restrict VRR on all DP branch devices instead for checking only for
HDMI. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260424090942.3060291-2-ankit.k.nautiyal@intel.com
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251031102020.95349-3-marco.crivellari@suse.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251031102020.95349-2-marco.crivellari@suse.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Instead of an extra kcalloc, Use a flexible array member to combine
allocations. Saves a pointer in the struct.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
If kzalloc fails, the function returns -ENOMEM without calling
efivar_unlock(). Since open() returned an error, the calling site
in pstore_get_backend_records() won't call the close() function, so
the lock is never released. Thus drop the lock in case of errors here.
Fixes: 859748255b434 ("efi: pstore: Omit efivars caching EFI varstore access layer")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change.
Fixes: b6cb4541853c7 ("net: stmmac: avoid rx queue overrun")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221010
Cc: stable@vger.kernel.org
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://patch.msgid.link/20260422044503.5349-1-CFSworks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PDC interrupts 122-125 were meant for ibi_i3c wakeup but qcs615 do not
support i3c. GPIOs 39,51,88 and 89 are also connected to different PDC
pin to support non-ibi wakeup. Update the wakeirq map to reflect same.
Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue.
Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
[linusw@kernel.org: Also fix the new IPQ9650]
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
In parse_fw_cfg(), if fwnode_property_match_property_string() fails with
-ENOENT, the code returns directly and leaks the bitmap.
Use __free(bitmap) for automatic cleanup to fix the leak.
Fixes: 9c105255108b ("pinctrl: pinconf-generic: perform basic checks on pincfg properties")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
QUP1_SE4 shares GPIO_36 & GPIO_37 for both L0/L1 and L3/L2 so the
function name cannot be the same or the alternate function cannot
be selected.
Split them up into individual lane functions so boards can specify.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
