| Age | Commit message (Collapse) | Author |
|---|
|
Extend fat_test with coverage for FAT timestamp edge cases that are not
currently exercised.
Add tests for fat_time_unix2fat() clamping at the UTC boundaries and
when time_offset pushes an otherwise valid timestamp outside the FAT
date range. Also cover the NULL time_cs path used by existing callers,
and verify fat_truncate_atime() truncation across timezone offsets.
Link: https://patch.msgid.link/20260315222404.9678-1-aviv.daum@gmail.com
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: avivdaum <aviv.daum@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When remove_inode_hugepages() was introduced in commit c86272287bc6
("hugetlb: create remove_inode_single_folio to remove single file folio")
it used to return a boolean to indicate if it bailed out due to race with
page faults. However, since the race is already solved by [1],
remove_inode_hugepages() doesn't have any path to return false anymore.
Simplify remove_inode_hugepages() return type to void, remove the
unnecessary ret variable, and adjust the call site in
remove_inode_hugepages(). No functional change in this commit.
Link: https://lkml.kernel.org/r/20260204214741.3161520-1-jiaqiyan@google.com
Link: https://lore.kernel.org/all/20220914221810.95771-10-mike.kravetz@oracle.com [1]
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Suggested-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In fs/tracefs/inode.c, tracefs_syscall_mkdir() and tracefs_syscall_rmdir()
previously used a local helper, get_dname(), which allocated a temporary
buffer on the heap via kmalloc() to hold the dentry name. This introduced
unnecessary overhead, an ENOMEM failure path, and required manual memory
cleanup via kfree().
As suggested by Al Viro, replace this heap allocation with the VFS dentry
name snapshot API. By stack-allocating a `struct name_snapshot` and using
take_dentry_name_snapshot() and release_dentry_name_snapshot(), we safely
capture the dentry name locklessly, eliminate the heap allocation entirely,
and remove the now-obsolete error handling paths. The get_dname() helper
is completely removed.
Testing:
Booted a custom kernel natively in virtme-ng (ARM64). Triggered tracefs
inode and dentry allocation by creating and removing a custom directory
under a temporary tracefs mount. Verified that the instance is created
successfully and that no memory errors or warnings are emitted in dmesg.
Link: https://patch.msgid.link/20260306200458.2264-1-anishm7030@gmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: AnishMulay <anishm7030@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Use guard(mutex), scoped_guard(mutex) and guard(src) to simplify the code
and remove a lot of the jumps to "out:" labels.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250604151625.250d13e1@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
gcc sometimes fails to analyse how two local variables in ntfs_write_bh()
are initialized, as the initialization happens only in the first pass
through the main loop:
fs/ntfs3/fsntfs.c: In function 'ntfs_write_bh':
fs/ntfs3/fsntfs.c:1443:17: error: 'fixup' may be used uninitialized [-Werror=maybe-uninitialized]
1443 | __le16 *fixup;
| ^~~~~
fs/ntfs3/fsntfs.c:1443:17: note: 'fixup' was declared here
1443 | __le16 *fixup;
| ^~~~~
fs/ntfs3/fsntfs.c:1487:30: error: 'sample' may be used uninitialized [-Werror=maybe-uninitialized]
1487 | *ptr = sample;
| ~~~~~^~~~~~~~
fs/ntfs3/fsntfs.c:1444:16: note: 'sample' was declared here
1444 | __le16 sample;
Initializing the two variables to bogus values shuts up the warning and
makes it clear that those cannot be used. I tried rearranging the loop to
move the initialization in front of it, but couldn't quite figure it out.
Fixes: 48d9b57b169f ("fs/ntfs3: add a subset of W=1 warnings for stricter checks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here!
Reported-by: syzbot+c1e9aedbd913fadad617@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c1e9aedbd913fadad617
Fixes: c380b52f6c57 ("fs/ntfs3: Change new sparse cluster processing")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This patch increases the size of the CLIENT_REC name field from 32 utf-16
chars to 64 utf-16 chars. It fixes the buffer overflow problem in
log_replay() reported by Robbert Morris.
Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Let's use more generic f2fs_stop_checkpoint() instead of
f2fs_handle_critical_error() to handle critical error in f2fs.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_handle_page_eio() is the only left place we set CP_ERROR_FLAG
directly, it missed to update superblock.s_stop_reason, let's
call f2fs_handle_critical_error() instead to fix that.
Introduce STOP_CP_REASON_READ_{META,NODE,DATA} stop_cp_reason enum
variable to indicate which kind of data we failed to read.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_update_inode() reads inode->i_blocks without holding i_lock to
serialize it to the on-disk inode, while concurrent truncate or
allocation paths may modify i_blocks under i_lock. Since blkcnt_t is
u64, this risks torn reads on 32-bit architectures.
Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent
potential compiler-induced tearing.
Fixes: 19f99cee206c ("f2fs: add core inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The ri parameter in truncate_partial_nodes() is unused. Remove it along
with the related code. No logical changes.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a
file, and then merges contiguous mappings into extents. If the mapping
is found in the read extent cache, node blocks do not need to be read.
However, in the following scenario, a contiguous extent can be split
into two extents:
$ dd if=/dev/zero of=data.128M bs=1M count=128
$ losetup -f data.128M
$ mkfs.f2fs /dev/loop0 -f
$ mount -o mode=lfs /dev/loop0 /mnt/f2fs/
$ cd /mnt/f2fs/
$ dd if=/dev/zero of=data.72M bs=1M count=72 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=4 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync
$ echo 3 > /proc/sys/vm/drop_caches
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ f2fs_io fiemap 0 1024 data.4M
Fiemap: offset = 0 len = 1024
logical addr. physical addr. length flags
0 0000000000000000 0000000006400000 0000000000200000 00001000
1 0000000000200000 0000000006600000 0000000000200000 00001001
Although the physical addresses of the ranges 0～2MB and 2M～4MB are
contiguous, the mapping for the 2M～4MB range is not present in memory.
When the physical addresses for the 0～2MB range are updated, no merge
happens because the adjacent mapping is missing from the in-memory
cache. As a result, fiemap reports two separate extents instead of a
single contiguous one.
The root cause is that the read extent cache does not guarantee that all
blocks of an extent are present in memory. Therefore, when the extent
length returned by f2fs_map_blocks_cached() is smaller than maxblocks,
the remaining mappings are retrieved via f2fs_get_dnode_of_data() to
ensure correct fiemap extent boundary handling.
Cc: stable@kernel.org
Fixes: cd8fc5226bef ("f2fs: remove the create argument to f2fs_map_blocks")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent
cache, map->m_multidev_dio is not updated, which leads to incorrect
multidevice information being reported by trace_f2fs_map_blocks().
This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when
the read extent cache is hit.
Cc: stable@kernel.org
Fixes: 0094e98bd147 ("f2fs: factor a f2fs_map_blocks_cached helper")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Cc: stable@vger.kernel.org
Signed-off-by: George Saad <geoo115@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The sbi parameter in f2fs_in_warm_node_list() is not used. Remove it to
simplify the function.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition.
Cc: stable@kernel.org
Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Reported-by: syzbot+6e4cb1cac5efc96ea0ca@syzkaller.appspotmail.com
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_hook+0x58c/0x5ec
prep_new_page+0x34/0x284
get_page_from_freelist+0x2dcc/0x2e8c
__alloc_pages_noprof+0x280/0x76c
__folio_alloc_noprof+0x18/0xac
__filemap_get_folio+0x6bc/0xdc4
pagecache_get_page+0x3c/0x104
do_garbage_collect+0x5c78/0x77a4
f2fs_gc+0xd74/0x25f0
gc_thread_func+0xb28/0x2930
kthread+0x464/0x5d8
ret_from_fork+0x10/0x20
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1563!
folio_end_read+0x140/0x168
f2fs_finish_read_bio+0x5c4/0xb80
f2fs_read_end_io+0x64c/0x708
bio_endio+0x85c/0x8c0
blk_update_request+0x690/0x127c
scsi_end_request+0x9c/0xb8c
scsi_io_completion+0xf0/0x250
scsi_finish_command+0x430/0x45c
scsi_complete+0x178/0x6d4
blk_mq_complete_request+0xcc/0x104
scsi_done_internal+0x214/0x454
scsi_done+0x24/0x34
which is similar to the problem reported by syzbot:
https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc
This case is consistent with the description in commit 9bf1a3f
("f2fs: avoid GC causing encrypted file corrupted"):
Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after
being written it is marked as uptodate. Then, Page 1 is moved from blkaddr
B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by
ra_data_block.
There is no need to read Page 1 again from blkaddr B, since it has already
been updated. Therefore, avoid initiating I/O in this case.
Fixes: 6aa58d8ad20a ("f2fs: readahead encrypted block during GC")
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add the defrag_blocks sysfs node to track
the amount of data blocks moved during filesystem
defragmentation.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When `fileinfo->fi_flags` does not have the `FIEMAP_FLAG_SYNC` bit set
and inline data has not been persisted yet, the physical address of the
extent is calculated incorrectly for unwritten inline inodes.
root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1
root@vm:/mnt/f2fs# f2fs_io fiemap 0 100 data.3k
Fiemap: offset = 0 len = 100
logical addr. physical addr. length flags
0 0000000000000000 00000ffffffff16c 0000000000000c00 00000301
This patch fixes the issue by checking if the inode's address is valid.
If the inline inode is unwritten, set the physical address to 0 and
mark the extent with `FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC`
flags.
Cc: stable@kernel.org
Fixes: 67f8cf3cee6f ("f2fs: support fiemap for inline_data")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
is enabled
During the f2fs_get_victim process, when the f2fs_need_rand_seg is enabled in select_policy,
p->offset is a random value, and the search range is from p->offset to MAIN_SECS.
When segno >= last_segment, the loop breaks and exits directly without searching
the range from 0 to p->offset.This results in an incomplete search when the random
offset is not zero.
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
syzbot reported a f2fs bug as below:
BUG: memory leak
unreferenced object 0xffff888127f70830 (size 16):
comm "syz.0.23", pid 6144, jiffies 4294943712
hex dump (first 16 bytes):
3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9..
backtrace (crc 925f8a80):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4520 [inline]
slab_alloc_node mm/slub.c:4844 [inline]
__do_kmalloc_node mm/slub.c:5237 [inline]
__kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250
kmalloc_noprof include/linux/slab.h:954 [inline]
fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364
f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143
f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961
f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308
vfs_rename+0x7ff/0x1250 fs/namei.c:6026
filename_renameat2+0x4f4/0x660 fs/namei.c:6144
__do_sys_renameat2 fs/namei.c:6173 [inline]
__se_sys_renameat2 fs/namei.c:6168 [inline]
__x64_sys_renameat2+0x59/0x80 fs/namei.c:6168
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux
label during whiteout initialization"), we added a call to
f2fs_setup_filename() without a matching call to f2fs_free_filename(),
fix it.
Fixes: 40b2d55e0452 ("f2fs: fix to create selinux label during whiteout initialization")
Cc: stable@kernel.org
Reported-by: syzbot+cf7946ab25b21abc4b66@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/69a75fe1.a70a0220.b118c.0014.GAE@google.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Since commit 52e7e0d88933 ("fscrypt: Switch to sync_skcipher and
on-stack requests") eliminated the dynamic allocation of crypto
requests, the only remaining dynamic memory allocation done by
fscrypt_encrypt_pagecache_blocks() is the bounce page allocation.
The bounce page is allocated from a mempool. Mempool allocations with
GFP_NOFS never fail. Therefore, fscrypt_encrypt_pagecache_blocks() can
no longer return -ENOMEM when passed GFP_NOFS.
Remove the now-unreachable code from f2fs_encrypt_one_page().
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/d9dc2ee1-283d-4467-ad36-a6a4aa557589@suse.cz/
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Refine the description to better highlight its features and use cases.
In addition, add instructions for building it as a module and clarify
the compression option.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The implicit FILEID_INO32_GEN encoder was changed to be explicit,
so we need to fix the detection.
When mounting overlayfs with upperdir and lowerdir on different ext4
filesystems, the expected kmsg log is:
overlayfs: "xino" feature enabled using 32 upper inode bits.
But instead, since the regressing commit, the kmsg log was:
overlayfs: "xino" feature enabled using 2 upper inode bits.
Fixes: e21fc2038c1b9 ("exportfs: make ->encode_fh() a mandatory method for NFS export")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
When sync init is used and the server exits for some reason (error, crash)
while processing FUSE_INIT, the filesystem creation will hang. The reason
is that while all other threads will exit, the mounting thread (or process)
will keep the device fd open, which will prevent an abort from happening.
This is a regression from the async mount case, where the mount was done
first, and the FUSE_INIT processing afterwards, in which case there's no
such recursive syscall keeping the fd open.
Fixes: dfb84c330794 ("fuse: allow synchronous FUSE_INIT")
Cc: stable@vger.kernel.org # v6.18
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Scoped user access reduces code complexity and seamlessly bring
masked user access on architectures that support it.
Replace user_access_begin/user_access_end blocks by
scoped user access.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/16daf33a8190a771a93e294d050bd8153521ffca.1774350128.git.chleroy@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In several places in readdir.c there are calculations of the total size
of a dirent, which contains a few fixed fields plus a name field with
variable size. To add fun every dirent is of a slightly different type:
- struct old_linux_dirent
- struct linux_dirent
- struct linux_dirent64
- struct compat_old_linux_dirent
- struct compat_linux_dirent
Replace ugly size calculation by a macro called dirent_size() which
calculates the size of the structure based on the pointed type and
the name field len.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/c20d2f8f6817a39401155cfc80f0dff88df116e0.1774350128.git.chleroy@kernel.org
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Zorro Lang reported the following lockdep splat:
"While running fstests xfs/556 on kernel 7.0.0-rc4+ (HEAD=04a9f1766954),
a lockdep warning was triggered indicating an inconsistent lock state
for sb->s_type->i_lock_key.
"The deadlock might occur because iomap_read_end_io (called from a
hardware interrupt completion path) invokes fserror_report, which then
calls igrab. igrab attempts to acquire the i_lock spinlock. However,
the i_lock is frequently acquired in process context with interrupts
enabled. If an interrupt occurs while a process holds the i_lock, and
that interrupt handler calls fserror_report, the system deadlocks.
"I hit this warning several times by running xfs/556 (mostly) or
generic/648 on xfs. More details refer to below console log."
along with this dmesg, for which I've cleaned up the stacktraces:
run fstests xfs/556 at 2026-03-18 20:05:30
XFS (sda3): Mounting V5 Filesystem 396e9164-c45a-4e05-be9d-b38c2c5c6477
XFS (sda3): Ending clean mount
XFS (sda3): Unmounting Filesystem 396e9164-c45a-4e05-be9d-b38c2c5c6477
XFS (sda3): Mounting V5 Filesystem bf3f89c3-3c45-4650-a9c7-744f39c0191e
XFS (sda3): Ending clean mount
XFS (sda3): Unmounting Filesystem bf3f89c3-3c45-4650-a9c7-744f39c0191e
XFS (dm-0): Mounting V5 Filesystem bf3f89c3-3c45-4650-a9c7-744f39c0191e
XFS (dm-0): Ending clean mount
device-mapper: table: 253:0: adding target device (start sect 209 len 1) caused an alignment inconsistency
device-mapper: table: 253:0: adding target device (start sect 210 len 62914350) caused an alignment inconsistency
buffer_io_error: 6 callbacks suppressed
Buffer I/O error on dev dm-0, logical block 209, async page read
Buffer I/O error on dev dm-0, logical block 209, async page read
XFS (dm-0): Unmounting Filesystem bf3f89c3-3c45-4650-a9c7-744f39c0191e
XFS (dm-0): Mounting V5 Filesystem bf3f89c3-3c45-4650-a9c7-744f39c0191e
XFS (dm-0): Ending clean mount
================================
WARNING: inconsistent lock state
7.0.0-rc4+ #1 Tainted: G S W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
od/2368602 [HC1[1]:SC0[0]:HE0:SE1] takes:
ff1100069f2b4a98 (&sb->s_type->i_lock_key#31){?.+.}-{3:3}, at: igrab+0x28/0x1a0
{HARDIRQ-ON-W} state was registered at:
__lock_acquire+0x40d/0xbd0
lock_acquire.part.0+0xbd/0x260
_raw_spin_lock+0x37/0x80
unlock_new_inode+0x66/0x2a0
xfs_iget+0x67b/0x7b0 [xfs]
xfs_mountfs+0xde4/0x1c80 [xfs]
xfs_fs_fill_super+0xe86/0x17a0 [xfs]
get_tree_bdev_flags+0x312/0x590
vfs_get_tree+0x8d/0x2f0
vfs_cmd_create+0xb2/0x240
__do_sys_fsconfig+0x3d8/0x9a0
do_syscall_64+0x13a/0x1520
entry_SYSCALL_64_after_hwframe+0x76/0x7e
irq event stamp: 3118
hardirqs last enabled at (3117): [<ffffffffb54e4ad8>] _raw_spin_unlock_irq+0x28/0x50
hardirqs last disabled at (3118): [<ffffffffb54b84c9>] common_interrupt+0x19/0xe0
softirqs last enabled at (3040): [<ffffffffb290ca28>] handle_softirqs+0x6b8/0x950
softirqs last disabled at (3023): [<ffffffffb290ce4d>] __irq_exit_rcu+0xfd/0x250
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sb->s_type->i_lock_key#31);
<Interrupt>
lock(&sb->s_type->i_lock_key#31);
*** DEADLOCK ***
1 lock held by od/2368602:
#0: ff1100069f2b4b58 (&sb->s_type->i_mutex_key#19){++++}-{4:4}, at: xfs_ilock+0x324/0x4b0 [xfs]
stack backtrace:
CPU: 15 UID: 0 PID: 2368602 Comm: od Kdump: loaded Tainted: G S W 7.0.0-rc4+ #1 PREEMPT(full)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R660/0R5JJC, BIOS 2.1.5 03/14/2024
Call Trace:
<IRQ>
dump_stack_lvl+0x6f/0xb0
print_usage_bug.part.0+0x230/0x2c0
mark_lock_irq+0x3ce/0x5b0
mark_lock+0x1cb/0x3d0
mark_usage+0x109/0x120
__lock_acquire+0x40d/0xbd0
lock_acquire.part.0+0xbd/0x260
_raw_spin_lock+0x37/0x80
igrab+0x28/0x1a0
fserror_report+0x127/0x2d0
iomap_finish_folio_read+0x13c/0x280
iomap_read_end_io+0x10e/0x2c0
clone_endio+0x37e/0x780 [dm_mod]
blk_update_request+0x448/0xf00
scsi_end_request+0x74/0x750
scsi_io_completion+0xe9/0x7c0
_scsih_io_done+0x6ba/0x1ca0 [mpt3sas]
_base_process_reply_queue+0x249/0x15b0 [mpt3sas]
_base_interrupt+0x95/0xe0 [mpt3sas]
__handle_irq_event_percpu+0x1f0/0x780
handle_irq_event+0xa9/0x1c0
handle_edge_irq+0x2ef/0x8a0
__common_interrupt+0xa0/0x170
common_interrupt+0xb7/0xe0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Code: 0f 1f 44 00 00 53 48 8b 74 24 08 48 89 fb 48 83 c7 18 e8 b5 73 5e fd 48 89 df e8 ed e2 5e fd e8 08 78 8f fd fb bf 01 00 00 00 <e8> 8d 56 4d fd 65 8b 05 46 d5 1d 03 85 c0 74 06 5b c3 cc cc cc cc
RSP: 0018:ffa0000027d07538 EFLAGS: 00000206
RAX: 0000000000000c2d RBX: ffffffffb6614bc8 RCX: 0000000000000080
RDX: 0000000000000000 RSI: ffffffffb6306a01 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffffffb75efc67 R11: 0000000000000001 R12: ff1100015ada0000
R13: 0000000000000083 R14: 0000000000000002 R15: ffffffffb6614c10
folio_wait_bit_common+0x407/0x780
filemap_update_page+0x8e7/0xbd0
filemap_get_pages+0x904/0xc50
filemap_read+0x320/0xc20
xfs_file_buffered_read+0x2aa/0x380 [xfs]
xfs_file_read_iter+0x263/0x4a0 [xfs]
vfs_read+0x6cb/0xb70
ksys_read+0xf9/0x1d0
do_syscall_64+0x13a/0x1520
Zorro's diagnosis makes sense, so the solution is to kick the failed
read handling to a workqueue much like we added for writeback ioends in
commit 294f54f849d846 ("fserror: fix lockdep complaint when igrabbing
inode").
Cc: Zorro Lang <zlang@redhat.com>
Link: https://lore.kernel.org/linux-xfs/20260319194303.efw4wcu7c4idhthz@doltdoltdolt/
Fixes: a9d573ee88af98 ("iomap: report file I/O errors to the VFS")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://patch.msgid.link/20260323210017.GL6223@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename trans_drain() to gfs2_trans_drain().
Add a new gfs2_trans_drain_list() helper and use it in
gfs2_trans_drain() to reduce code duplication.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Move gfs2_remove_from_journal() from meta_io.c to log.c and fix a minor
indentation glitch.
With that, gfs2_remove_from_ail() is now only used inside log.c, so it
can be made static.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
These two helpers only hide the locking operation; they do not make
the code more readable.
Created with:
sed -i -e 's:gfs2_log_unlock(sdp):spin_unlock(\&sdp->sd_log_lock):' \
-e 's:gfs2_log_lock(sdp):spin_lock(\&sdp->sd_log_lock):'
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
It turns out that for some workloads, the fix in commit b74cd55aa9a9d
("gfs2: low-memory forced flush fixes") causes the number of forced log
flushes to increase to a degree that the overall filesystem performance
drops significantly. Address that by forcing a log flush only when
gfs2_writepages cannot make any progress rather than when it cannot make
"enough" progress.
Fixes: b74cd55aa9a9d ("gfs2: low-memory forced flush fixes")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When gfs2_evict_inode() is called on an inode with unwritten data in the
page cache, the page cache needs to be written before it can be
truncated. This doesn't always happen. Fix that by changing
gfs2_evict_inode() to always either call evict_linked_inode() or
evict_unlinked_inode().
Inside evict_unlinked_inode(), first check if the inode is dirty. If it
is, make sure the inode glock is held and write back the data and
metadata. If it isn't, skip those steps.
Also, make sure that gfs2_evict_inode() calls gfs2_evict_inode() and
evict_unlinked_inode() only if ip->i_gl is not NULL; this avoids
unnecessary complications there.
Fixes xfstest generic/211.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add gl helper variables in evict_unlinked_inode() and
evict_linked_inode(). This patch isn't very interesting by itself, but
it makes the next patch more readable.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In evict_linked_inode(), the truncate_inode_pages() calls are carried
out inside a transaction. This code was added to what was then function
gfs2_delete_inode() in commit 16615be18cadf ("[GFS2] Clean up journaled
data writing").
These transactions are only used for creating revokes for the jdata
buffers in the journal, so don't create such transactions when we know
that the address space doesn't contain any jdata buffers for this inode
and truncate the metadata address space outside of the transaction.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Whenever we get an error updating the device stats item for a device in
btrfs_run_dev_stats() we allow the loop to go to the next device, and if
updating the stats item for the next device succeeds, we end up losing
the error we had from the previous device.
Fix this by breaking out of the loop once we get an error and make sure
it's returned to the caller. Since we are in the transaction commit path
(and in the critical section actually), returning the error will result
in a transaction abort.
Fixes: 733f4fbbc108 ("Btrfs: read device stats on mount, write modified ones during commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Since commit 3d74a7556fba ("btrfs: zlib: introduce zlib_compress_bio()
helper"), there are some reports about different crashes in zlib
compression path. One of the symptoms is list corruption like the
following:
list_del corruption. next->prev should be fffffbb340204a08, but was ffff8d6517cb7de0. (next=fffffbb3402d62c8)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:65!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 21436 Comm: kworker/u16:7 Not tainted 7.0.0-rc2-jcg+ #1 PREEMPT
Hardware name: LENOVO 10VGS02P00/3130, BIOS M1XKT57A 02/10/2022
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:__list_del_entry_valid_or_report+0xec/0xf0
Call Trace:
<TASK>
btrfs_alloc_compr_folio+0xae/0xc0 [btrfs]
zlib_compress_bio+0x39d/0x6a0 [btrfs]
btrfs_compress_bio+0x2e3/0x3d0 [btrfs]
compress_file_range+0x2b0/0x660 [btrfs]
btrfs_work_helper+0xdb/0x3e0 [btrfs]
process_one_work+0x192/0x3d0
worker_thread+0x19a/0x310
kthread+0xdf/0x120
ret_from_fork+0x22e/0x310
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Other symptoms include VM_BUG_ON() during folio_put() but it's rarer.
David Sterba firstly reported this during his CI runs but unfortunately
I'm unable to hit it.
Meanwhile zstd/lzo doesn't seem to have the same problem.
[CAUSE]
During zlib_compress_bio() every time the output buffer is full, we
queue the full folio into the compressed bio, and allocate a new folio
as the output folio.
After the input has finished, we loop through zlib_deflate() with
Z_FINISH to flush all output.
And when that is done, we still need to check if the last folio has any
content, and if so we still need to queue that part into the compressed
bio.
The problem is in the final folio handling, if the final folio is full
(for x86_64 the folio size is 4K), the length to queue is calculated by
u32 cur_len = offset_in_folio(out_folio, workspace->strm.total_out);
But since total_out is 4K aligned, the resulted @cur_len will be 0, then
we hit the bio_add_folio(), which has a quirk that if bio_add_folio()
got an length 0, it will still queue the folio into the bio, but return
false.
In that case we go to out: tag, which calls btrfs_free_compr_folio() to
release @out_folio, which may put the out folio into the btrfs global
pool list.
On the other hand, that @out_folio is already added to the
compressed bio, and will later be released again by
cleanup_compressed_bio(), which results double release.
And if this time we still need to put the folio into the btrfs global
pool list, it will result a list corruption because it's already in the
list.
[FIX]
Instead of offset_inside_folio(), directly use the difference between
strm.total_out and bi_size.
So that if the last folio is completely full, we can still properly
queue the full folio other than queueing zero byte.
Fixes: 3d74a7556fba ("btrfs: zlib: introduce zlib_compress_bio() helper")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Reported-by: syzbot+3c4d8371d65230f852a2@syzkaller.appspotmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221176
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When create_space_info_sub_group() allocates elements of
space_info->sub_group[], kobject_init_and_add() is called for each
element via btrfs_sysfs_add_space_info_type(). However, when
check_removing_space_info() frees these elements, it does not call
btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is
not called and the associated kobj->name objects are leaked.
This memory leak is reproduced by running the blktests test case
zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak
feature reports the following error:
unreferenced object 0xffff888112877d40 (size 16):
comm "mount", pid 1244, jiffies 4294996972
hex dump (first 16 bytes):
64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc......
backtrace (crc 53ffde4d):
__kmalloc_node_track_caller_noprof+0x619/0x870
kstrdup+0x42/0xc0
kobject_set_name_vargs+0x44/0x110
kobject_init_and_add+0xcf/0x150
btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs]
create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs]
create_space_info+0x211/0x320 [btrfs]
btrfs_init_space_info+0x15a/0x1b0 [btrfs]
open_ctree+0x33c7/0x4a50 [btrfs]
btrfs_get_tree.cold+0x9f/0x1ee [btrfs]
vfs_get_tree+0x87/0x2f0
vfs_cmd_create+0xbd/0x280
__do_sys_fsconfig+0x3df/0x990
do_syscall_64+0x136/0x1540
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid the leak, call btrfs_sysfs_remove_space_info() instead of
kfree() for the elements.
Fixes: f92ee31e031c ("btrfs: introduce btrfs_space_info sub-group")
Link: https://lore.kernel.org/linux-block/b9488881-f18d-4f47-91a5-3c9bf63955a5@wdc.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/af8c15fa-4e41-4bb2-885c-0bc4e97532a6@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix the superblock offset mismatch error message in
btrfs_validate_super(): we changed it so that it considers all the
superblocks, but the message still assumes we're only looking at the
first one.
The change from %u to %llu is because we're changing from a constant to
a u64.
Fixes: 069ec957c35e ("btrfs: Refactor btrfs_check_super_valid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The struct pidfd_info currently exposes in a field called coredump_signal the
signal number (si_signo) that triggered the dump (for example, 11 for SIGSEGV).
However, it is also valuable to understand the reason why that signal was sent.
This additional context is provided by the signal code (si_code), such as 2 for
SEGV_ACCERR.
Add a new field to struct pidfd_info called coredump_code with the value of
si_code for the benefit of sysadmins who pipe core dumps to user-space programs
for later analysis. The following snippet illustrates a simplified C program
that consumes coredump_signal and coredump_code, and then logs core dump
signals and codes to a file:
int pidfd = (int)atoi(argv[1]);
struct pidfd_info info = {
.mask = PIDFD_INFO_EXIT | PIDFD_INFO_COREDUMP,
};
if (ioctl(pidfd, PIDFD_GET_INFO, &info) == 0)
if (info.mask & PIDFD_INFO_COREDUMP)
fprintf(f, "PID=%d, si_signo: %d si_code: %d\n",
info.pid, info.coredump_signal, info.coredump_code);
Assuming the program is installed under /usr/local/bin/core-logger, core dump
processing can be enabled by setting /proc/sys/kernel/core_pattern to
'|/usr/local/bin/dumpstuff %F'.
systemd-coredump(8) already uses pidfds to process core dumps, and it could be
extended to include the values of coredump_code too.
Signed-off-by: Emanuele Rocca <emanuele.rocca@arm.com>
Link: https://patch.msgid.link/acE52HIFivNZN3nE@NH27D9T0LF
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current rule for smb2_mapping_table.c uses `$(call cmd,...)`, which
fails to track command line modifications in the Makefile (e.g., modifying
the command to `perl -d` or `perl -w` for debug will not trigger a rebuild)
and does not generate the required .cmd file for Kbuild.
Fix this by transitioning to the standard `$(call if_changed,...)` macro.
This includes adding the `FORCE` prerequisite and appending the output
file to the `targets` variable so Kbuild can track it properly.
As a result, Kbuild now automatically handles the cleaning of the
generated file, allowing us to safely drop the redundant `clean-files`
assignment.
Fixes: c527e13a7a66 ("cifs: Autogenerate SMB2 error mapping table")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coredump is a generally useful and interesting event in the lifetime
of a process. Add a tracepoint so it can be monitored through the
standard kernel tracing infrastructure.
BPF-based crash monitoring is an advanced approach that
allows real-time crash interception: by attaching a BPF program at
this point, tools can use bpf_get_stack() with BPF_F_USER_STACK to
capture the user-space stack trace at the exact moment of the crash,
before the process is fully terminated, without waiting for a
coredump file to be written and parsed.
However, there is currently no stable kernel API for this use case.
Existing tools rely on attaching fentry probes to do_coredump(),
which is an internal function whose signature changes across kernel
versions, breaking these tools.
Add a stable tracepoint that fires at the beginning of
do_coredump(), providing BPF programs a reliable attachment point.
At tracepoint time, the crashing process context is still live, so
BPF programs can call bpf_get_stack() with BPF_F_USER_STACK to
extract the user-space backtrace.
The tracepoint records:
- sig: signal number that triggered the coredump
- comm: process name
Example output:
$ echo 1 > /sys/kernel/tracing/events/coredump/coredump/enable
$ sleep 999 &
$ kill -SEGV $!
$ cat /sys/kernel/tracing/trace
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
sleep-634 [036] ..... 145.222206: coredump: sig=11 comm=sleep
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260323-coredump_tracepoint-v2-1-afced083b38d@debian.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
do_sys_truncate ist only used to implement ksys_truncate and the native
truncate syscalls. Merge do_sys_truncate into ksys_truncate and return
int from it as it only returns 0 or negative errnos.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260323070205.2939118-4-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pass the flags one level down to replace the somewhat confusing small
argument, and clean up do_truncate as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260323070205.2939118-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The "small" argument to do_sys_ftruncate indicates if > 32-bit size
should be reject, but all the arch-specific compat ftruncate64
implementations get this wrong. Merge do_sys_ftruncate and
ksys_ftruncate, replace the integer as boolean small flag with a
descriptive one about LFS semantics, and use it correctly in the
architecture-specific ftruncate64 implementations.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 3dd681d944f6 ("arm64: 32-bit (compat) applications support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260323070205.2939118-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
XFS has long supported the case where it is possible to have dirty
data in pagecache backed by COW fork blocks and a hole in the data
fork. This occurs for two reasons. On reflink enabled files, COW
fork blocks are allocated with preallocation to help avoid
fragmention. Second, if a mapping lookup for a write finds blocks in
the COW fork, it consumes those blocks unconditionally. This might
mean that COW fork blocks are backed by non-shared blocks or even a
hole in the data fork, both of which are perfectly fine.
This leaves an odd corner case for zero range, however, because it
needs to distinguish between ranges that are sparse and thus do not
require zeroing and those that are not. A range backed by COW fork
blocks and a data fork hole might either be a legitimate hole in the
file or a range with pending buffered writes that will be written
back (which will remap COW fork blocks into the data fork).
This "COW fork blocks over data fork hole" situation has
historically been reported as a hole to iomap, which then has grown
a flush hack as a workaround to ensure zeroing occurs correctly. Now
that this has been lifted into the filesystem and replaced by the
dirty folio lookup mechanism, we can do better and use the pagecache
state to decide how to report the mapping. If a COW fork range
exists with dirty folios in cache, then report a typical shared
mapping. If the range is clean in cache, then we can consider the
COW blocks preallocation and call it a hole.
This doesn't fundamentally change behavior, but makes mapping
reporting more accurate. Note that this does require splitting
across the EOF boundary (similar to normal zero range) to ensure we
don't spuriously perform post-eof zeroing. iomap will warn about
zeroing beyond EOF because folios beyond i_size may not be written
back.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Now that the zero range pagecache flush is purely isolated to
providing zeroing correctness in this case, we can remove it and
replace it with the folio batch mechanism that is used for handling
unwritten extents.
This is still slightly odd in that XFS reports a hole vs. a mapping
that reflects the COW fork extents, but that has always been the
case in this situation and so a separate issue. We drop the iomap
warning that assumes the folio batch is always associated with
unwritten mappings, but this is mainly a development assertion as
otherwise the core iomap fbatch code doesn't care much about the
mapping type if it's handed the set of folios to process.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
