| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Major withdraw / error handling overhaul based on dlm's new
DLM_RELEASE_RECOVER feature: this allows gfs to treat withdraws like
node failures. Make withdraws asynchronous
- Fix a bug in commit e4a8b5481c59a that caused 'df' to remain out of
sync. ('df' is still allowed to go slightly out of sync for short
periods of time)
- Prevent recusive memory reclaim in gfs2_unstuff_dinode()
- Clean up SDF_JOURNAL_LIVE flag handling
- Fix remote evict for read-only filesystems
- Fix a misuse of bio_chain()
- Various other minor cleanups
* tag 'gfs2-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (35 commits)
gfs2: Fix use of bio_chain
gfs2: Clean up SDF_JOURNAL_LIVE flag handling
gfs2: No longer thaw filesystems during a withdraw
gfs2: Withdraw immediately in gfs2_trans_add_meta
gfs2: New gfs2_withdraw_helper
gfs2: Clean up properly during a withdraw
gfs2: Rename gfs2_{gl_dq_holders => withdraw_glocks}
Revert "gfs2: fix infinite loop when checking ail item count before go_inval"
Revert "gfs2: Allow some glocks to be used during withdraw"
Revert "gfs2: Check for log write errors before telling dlm to unlock"
Revert "gfs2: fix a deadlock on withdraw-during-mount"
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (6/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (5/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (4/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (3/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (2/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (1/6)
Revert "gfs2: don't stop reads while withdraw in progress"
gfs2: Rename LM_FLAG_{NOEXP -> RECOVER}
gfs2: Kill gfs2_io_error_bh_wd
...
|
|
Pull smb client and server updates from Steve French:
- server fixes:
- IPC use after free locking fix
- fix locking bug in delete paths
- fix use after free in disconnect
- fix underflow in locking check
- error mapping improvement
- socket listening improvement
- return code mapping fixes
- crypto improvements (use default libraries)
- cleanup patches:
- netfs
- client checkpatch cleanup
- server cleanup
- move server/client duplicate code to common code
- fix some defines to better match protocol specification
- smbdirect (RDMA) fixes
- client debugging improvements for leases
* tag 'v6.19-rc-smb-fixes' of git://git.samba.org/ksmbd: (44 commits)
cifs: Use netfs_alloc/free_folioq_buffer()
smb: client: show smb lease key in open_dirs output
smb: client: show smb lease key in open_files output
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
smb: client: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smbd_conn_upcall()
smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()
smb: smbdirect: introduce SMBDIRECT_CHECK_STATUS_{WARN,DISCONNECT}()
smb: smbdirect: introduce SMBDIRECT_DEBUG_ERR_PTR() helper
ksmbd: vfs: fix race on m_flags in vfs_cache
ksmbd: Replace strcpy + strcat to improve convert_to_nt_pathname
smb: move FILE_SYSTEM_ATTRIBUTE_INFO to common/fscc.h
ksmbd: implement error handling for STATUS_INFO_LENGTH_MISMATCH in smb server
ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency
ksmbd: server: avoid busy polling in accept loop
smb: move create_durable_reconn to common/smb2pdu.h
smb: fix some warnings reported by scripts/checkpatch.pl
smb: do some cleanups
smb: move FILE_SYSTEM_SIZE_INFO to common/fscc.h
smb: move some duplicate struct definitions to common/fscc.h
smb: move list of FileSystemAttributes to common/fscc.h
...
|
|
Pull xfs updates from Carlos Maiolino:
"There are no major changes in xfs. This contains mostly some code
cleanups, a few bug fixes and documentation update. Highlights are:
- Quota locking cleanup
- Getting rid of old xlog_in_core_2_t type"
* tag 'xfs-merge-6.19' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
docs: remove obsolete links in the xfs online repair documentation
xfs: move some code out of xfs_iget_recycle
xfs: use zi more in xfs_zone_gc_mount
xfs: remove the unused bv field in struct xfs_gc_bio
xfs: remove xarray mark for reclaimable zones
xfs: remove the xlog_in_core_t typedef
xfs: remove l_iclog_heads
xfs: remove the xlog_rec_header_t typedef
xfs: remove xlog_in_core_2_t
xfs: remove a very outdated comment from xlog_alloc_log
xfs: cleanup xlog_alloc_log a bit
xfs: don't use xlog_in_core_2_t in struct xlog_in_core
xfs: add a on-disk log header cycle array accessor
xfs: add a XLOG_CYCLE_DATA_SIZE constant
xfs: reduce ilock roundtrips in xfs_qm_vop_dqalloc
xfs: move xfs_dquot_tree calls into xfs_qm_dqget_cache_{lookup,insert}
xfs: move quota locking into xrep_quota_item
xfs: move quota locking into xqcheck_commit_dquot
xfs: move q_qlock locking into xqcheck_compare_dquot
xfs: move q_qlock locking into xchk_quota_item
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
- Fix a WARNING caused by a recent FSDAX misdetection regression
- Fix the filesystem stacking limit for file-backed mounts
- Print more informative diagnostics on decompression errors
- Switch the on-disk definition `erofs_fs.h` to the MIT license
- Minor cleanups
* tag 'erofs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: switch on-disk header `erofs_fs.h` to MIT license
erofs: get rid of raw bi_end_io() usage
erofs: enable error reporting for z_erofs_fixup_insize()
erofs: enable error reporting for z_erofs_stream_switch_bufs()
erofs: improve Zstd, LZMA and DEFLATE error strings
erofs: improve decompression error reporting
erofs: tidy up z_erofs_lz4_handle_overlap()
erofs: limit the level of fs stacking for file-backed mounts
erofs: correct FSDAX detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"Several fixes for syzbot reported issues, HFS/HFS+ fixes of xfstests
failures, Kunit-based unit-tests introduction, and code cleanup:
- Dan Carpenter fixed a potential use-after-free issue in
hfs_correct_next_unused_CNID() method. Tetsuo Handa has made nice
fix of syzbot reported issue related to incorrect inode->i_mode
management if volume has been corrupted somehow. Yang Chenzhi has
made really good fix of potential race condition in
__hfs_bnode_create() method for HFS+ file system.
- Several fixes to xfstests failures. Particularly, generic/070,
generic/073, and generic/101 test-cases finish successfully for the
case of HFS+ file system right now.
- HFS and HFS+ drivers share multiple structures of on-disk layout
declarations. Some structures are used without any change. However,
we had two independent declarations of the same structures in HFS
and HFS+ drivers.
The on-disk layout declarations have been moved into
include/linux/hfs_common.h with the goal to exclude the
declarations duplication and to keep the HFS/HFS+ on-disk layout
declarations in one place.
Also, this patch prepares the basis for creating a hfslib that can
aggregate common functionality without necessity to duplicate the
same code in HFS and HFS+ drivers.
- HFS/HFS+ really need unit-tests because of multiple xfstests
failures. The first two patches introduce Kunit-based unit-tests
for the case string operations in HFS/HFS+ file system drivers"
* tag 'hfs-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs/hfsplus: move on-disk layout declarations into hfs_common.h
hfsplus: fix volume corruption issue for generic/101
hfsplus: introduce KUnit tests for HFS+ string operations
hfs: introduce KUnit tests for HFS string operations
hfsplus: fix volume corruption issue for generic/073
hfsplus: Verify inode mode when loading from disk
hfsplus: fix volume corruption issue for generic/070
hfs/hfsplus: prevent getting negative values of offset/length
hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create
hfs: fix potential use after free in hfs_correct_next_unused_CNID()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- shutdown ioctl support (needs CONFIG_BTRFS_EXPERIMENTAL for now):
- set filesystem state as being shut down (also named going down
in other filesystems), where all active operations return EIO
and this cannot be changed until unmount
- pending operations are attempted to be finished but error
messages may still show up depending on where exactly the
shutdown happened
- scrub (and device replace) vs suspend/hibernate:
- a running scrub will prevent suspend, which can be annoying as
suspend is an immediate request and scrub is not critical
- filesystem freezing before suspend was not sufficient as the
problem was in process freezing
- behaviour change: on suspend scrub and device replace are
cancelled, where scrub can record the last state and continue
from there; the device replace has to be restarted from the
beginning
- zone stats exported in sysfs, from the perspective of the
filesystem this includes active, reclaimable, relocation etc zones
Performance:
- improvements when processing space reservation tickets by
optimizing locking and shrinking critical sections, cumulative
improvements in lockstat numbers show +15%
Notable fixes:
- use vmalloc fallback when allocating bios as high order allocations
can happen with wide checksums (like sha256)
- scrub will always track the last position of progress so it's not
starting from zero after an error
Core:
- under experimental config, checksum calculations are offloaded to
process context, simplifies locking and allows to remove
compression write worker kthread(s):
- speed improvement in direct IO throughput with buffered IO
fallback is +15% when not offloaded but this is more related to
internal crypto subsystem improvements
- this will be probably default in the future removing the sysfs
tunable
- (experimental) block size > page size updates:
- support more operations when not using large folios (encoded
read/write and send)
- raid56
- more preparations for fscrypt support
Other:
- more conversions to auto-cleaned variables
- parameter cleanups and removals
- extended warning fixes
- improved printing of structured values like keys
- lots of other cleanups and refactoring"
* tag 'for-6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: remove unnecessary inode key in btrfs_log_all_parents()
btrfs: remove redundant zero/NULL initializations in btrfs_alloc_root()
btrfs: remaining BTRFS_PATH_AUTO_FREE conversions
btrfs: send: do not allocate memory for xattr data when checking it exists
btrfs: send: add unlikely to all unexpected overflow checks
btrfs: reduce arguments to btrfs_del_inode_ref_in_log()
btrfs: remove root argument from btrfs_del_dir_entries_in_log()
btrfs: use test_and_set_bit() in btrfs_delayed_delete_inode_ref()
btrfs: don't search back for dir inode item in INO_LOOKUP_USER
btrfs: don't rewrite ret from inode_permission
btrfs: add orig_logical to btrfs_bio for encryption
btrfs: disable verity on encrypted inodes
btrfs: disable various operations on encrypted inodes
btrfs: remove redundant level reset in btrfs_del_items()
btrfs: simplify leaf traversal after path release in btrfs_next_old_leaf()
btrfs: optimize balance_level() path reference handling
btrfs: factor out root promotion logic into promote_child_to_root()
btrfs: raid56: remove the "_step" infix
btrfs: raid56: enable bs > ps support
btrfs: raid56: prepare finish_parity_scrub() to support bs > ps cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
__blkdev_issue_discard() always returns 0, making the error assignment
in __submit_discard_cmd() dead code.
Initialize err to 0 and remove the error assignment from the
__blkdev_issue_discard() call to err. Move fault injection code into
already present if branch where err is set to -EIO.
This preserves the fault injection behavior while removing dead error
handling.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch optimizes the tracepoint by replacing these hardcoded strings
with a new enumeration f2fs_cp_phase.
1.Defines enum f2fs_cp_phase with values for each checkpoint phase.
2.Updates trace_f2fs_write_checkpoint to accept a u16 phase argument
instead of a string pointer.
3.Uses __print_symbolic in TP_printk to convert the enum values
back to their corresponding strings for human-readable trace output.
This change reduces the storage overhead for each trace event
by replacing a variable-length string with a 2-byte integer,
while maintaining the same readable output in ftrace.
Signed-off-by: YH Lin <yhli@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
w/ LFS mode, in get_left_section_blocks(), we should not account the
blocks which were used before and now are invalided, otherwise those
blocks will be counted as freed one in has_curseg_enough_space(), result
in missing to trigger GC in time.
Cc: stable@kernel.org
Fixes: 249ad438e1d9 ("f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.")
Fixes: bf34c93d2645 ("f2fs: check curseg space before foreground GC")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
cat /sys/kernel/debug/f2fs/status
Main area: 17 segs, 17 secs 17 zones
TYPE blkoff segno secno zoneno dirty_seg full_seg valid_blk
- COLD data: 0 4 4 4 0 0 0
- WARM data: 0 7 7 7 0 0 0
- HOT data: 1 5 5 5 2 0 512
- Dir dnode: 3 0 0 0 1 0 2
- File dnode: 0 1 1 1 0 0 0
- Indir nodes: 0 2 2 2 0 0 0
- Pinned file: 0 -1 -1 -1
- ATGC data: 0 -1 -1 -1
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
opt field in structure f2fs_mount_info and opt_mask field in structure
f2fs_fs_context is 32-bits variable, now we're running out of available
bits in them, let's expand them to 64-bits for better scalability.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes default schedule timeout value from 20ms to 1ms,
in order to give caller more chances to check whether IO or non-IO
congestion condition has already been mitigable.
In addition, default interval of periodical discard submission is
kept to 20ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs retry logic, we will call f2fs_io_schedule_timeout() to sleep as
uninterruptible state (waiting for IO) for a while, however, in several
paths below, we are not blocked by IO:
- f2fs_write_single_data_page() return -EAGAIN due to racing on cp_rwsem.
- f2fs_flush_device_cache() failed to submit preflush command.
- __issue_discard_cmd_range() sleeps periodically in between two in batch
discard submissions.
So, in order to reveal state of task more accurate, let's introduce
f2fs_schedule_timeout() and call it in above paths in where we are waiting
for non-IO reasons.
Then we can get real reason of uninterruptible sleep for a thread in
tracepoint, perfetto, etc.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
memalloc_retry_wait() is recommended in memory allocation retry logic,
use it as much as possible.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds a sysfs entry showing the max zones that F2FS can write
concurrently.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The usage of unusable_blocks_per_sec is already wrapped by
CONFIG_BLK_DEV_ZONED, except for its declaration and the definitions of
CAP_BLKS_PER_SEC and CAP_SEGS_PER_SEC. This patch ensures that all code
related to unusable_blocks_per_sec is properly wrapped under the
CONFIG_BLK_DEV_ZONED option.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_recover_fsync_data(),use LIST_HEAD() to declare and
initialize the list_head in one step instead of using
INIT_LIST_HEAD() separately.
No functional change.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The recent increase in the number of Segment Summary Area (SSA) entries
from 512 to 2048 was an unintentional change in logic of 16kb block
support. This commit corrects the issue.
To better utilize the space available from the erroneous 2048-entry
calculation, we are implementing a solution to share the currently
unused SSA space with neighboring segments. This enhances overall
SSA utilization without impacting the established 8MB segment size.
Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a tracepoint in the fadvise call path.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The age extent cache uses last_blocks (derived from
allocated_data_blocks) to determine data age. However, there's a
conflict between the deletion
marker (last_blocks=0) and legitimate last_blocks=0 cases when
allocated_data_blocks overflows to 0 after reaching ULLONG_MAX.
In this case, valid extents are incorrectly skipped due to the
"if (!tei->last_blocks)" check in __update_extent_tree_range().
This patch fixes the issue by:
1. Reserving ULLONG_MAX as an invalid/deletion marker
2. Limiting allocated_data_blocks to range [0, ULLONG_MAX-1]
3. Using F2FS_EXTENT_AGE_INVALID for deletion scenarios
4. Adjusting overflow age calculation from ULLONG_MAX to (ULLONG_MAX-1)
Reproducer (using a patched kernel with allocated_data_blocks
initialized to ULLONG_MAX - 3 for quick testing):
Step 1: Mount and check initial state
# dd if=/dev/zero of=/tmp/test.img bs=1M count=100
# mkfs.f2fs -f /tmp/test.img
# mkdir -p /mnt/f2fs_test
# mount -t f2fs -o loop,age_extent_cache /tmp/test.img /mnt/f2fs_test
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551612 # ULLONG_MAX - 3
Inner Struct Count: tree: 1(0), node: 0
Step 2: Create files and write data to trigger overflow
# touch /mnt/f2fs_test/{1,2,3,4}.txt; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551613 # ULLONG_MAX - 2
Inner Struct Count: tree: 5(0), node: 1
# dd if=/dev/urandom of=/mnt/f2fs_test/1.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551614 # ULLONG_MAX - 1
Inner Struct Count: tree: 5(0), node: 2
# dd if=/dev/urandom of=/mnt/f2fs_test/2.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551615 # ULLONG_MAX
Inner Struct Count: tree: 5(0), node: 3
# dd if=/dev/urandom of=/mnt/f2fs_test/3.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 0 # Counter overflowed!
Inner Struct Count: tree: 5(0), node: 4
Step 3: Trigger the bug - next write should create node but gets skipped
# dd if=/dev/urandom of=/mnt/f2fs_test/4.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 1
Inner Struct Count: tree: 5(0), node: 4
Expected: node: 5 (new extent node for 4.txt)
Actual: node: 4 (extent insertion was incorrectly skipped due to
last_blocks = allocated_data_blocks = 0 in __get_new_block_age)
After this fix, the extent node is correctly inserted and node count
becomes 5 as expected.
Fixes: 71644dff4811 ("f2fs: add block_age-based extent cache")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add check for inode->i_nlink == 1 for directories during unlink,
as their value is decremented twice, which can trigger a warning in
drop_nlink. In such case mark the filesystem as corrupted and return
from the function call with the relevant failure return value.
Additionally add the check for i_nlink == 1 in
sanity_check_inode in order to detect on-disk corruption early.
Reported-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c07d47c7bc68f47b9083
Tested-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Rename "fail" label to "out" as it's used as a default
exit path out of f2fs_unlink as well as error path.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When F2FS uses multiple block devices, each device may have a
different discard granularity. The minimum trim granularity must be
at least the maximum discard granularity of all devices, excluding
zoned devices. Use max_t instead of the max() macro to compute the
maximum value.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The one_time_gc field in struct victim_sel_policy is conditionally
initialized but unconditionally read, leading to undefined behavior
that triggers UBSAN warnings.
In f2fs_get_victim() at fs/f2fs/gc.c:774, the victim_sel_policy
structure is declared without initialization:
struct victim_sel_policy p;
The field p.one_time_gc is only assigned when the 'one_time' parameter
is true (line 789):
if (one_time) {
p.one_time_gc = one_time;
...
}
However, this field is unconditionally read in subsequent get_gc_cost()
at line 395:
if (p->one_time_gc && (valid_thresh_ratio < 100) && ...)
When one_time is false, p.one_time_gc contains uninitialized stack
memory. Hence p.one_time_gc is an invalid bool value.
UBSAN detects this invalid bool value:
UBSAN: invalid-load in fs/f2fs/gc.c:395:7
load of value 77 is not a valid value for type '_Bool'
CPU: 3 UID: 0 PID: 1297 Comm: f2fs_gc-252:16 Not tainted 6.18.0-rc3
#5 PREEMPT(voluntary)
Hardware name: OpenStack Foundation OpenStack Nova,
BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x70/0x90
dump_stack+0x14/0x20
__ubsan_handle_load_invalid_value+0xb3/0xf0
? dl_server_update+0x2e/0x40
? update_curr+0x147/0x170
f2fs_get_victim.cold+0x66/0x134 [f2fs]
? sched_balance_newidle+0x2ca/0x470
? finish_task_switch.isra.0+0x8d/0x2a0
f2fs_gc+0x2ba/0x8e0 [f2fs]
? _raw_spin_unlock_irqrestore+0x12/0x40
? __timer_delete_sync+0x80/0xe0
? timer_delete_sync+0x14/0x20
? schedule_timeout+0x82/0x100
gc_thread_func+0x38b/0x860 [f2fs]
? gc_thread_func+0x38b/0x860 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0x10b/0x220
? __pfx_gc_thread_func+0x10/0x10 [f2fs]
? _raw_spin_unlock_irq+0x12/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork+0x11a/0x160
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This issue is reliably reproducible with the following steps on a
100GB SSD /dev/vdb:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs_test
fio --name=gc --directory=/mnt/f2fs_test --rw=randwrite \
--bs=4k --size=8G --numjobs=12 --fsync=4 --runtime=10 \
--time_based
echo 1 > /sys/fs/f2fs/vdb/gc_urgent
The uninitialized value causes incorrect GC victim selection, leading
to unpredictable garbage collection behavior.
Fix by zero-initializing the entire victim_sel_policy structure to
ensure all fields have defined values.
Fixes: e791d00bd06c ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Xfstests generic/335, generic/336 sometimes crash with the following message:
F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1
------------[ cut here ]------------
kernel BUG at fs/f2fs/super.c:1939!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_put_super+0x3b3/0x3c0
Call Trace:
<TASK>
generic_shutdown_super+0x7e/0x190
kill_block_super+0x1a/0x40
kill_f2fs_super+0x9d/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x5c/0xa0
exit_to_user_mode_loop+0xb7/0xc0
do_syscall_64+0x1ae/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
It appears that sometimes it is possible that f2fs_put_super() is called before
all node page reads are completed.
Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem.
Cc: stable@kernel.org
Fixes: 20872584b8c0b ("f2fs: fix to drop all dirty meta/node pages during umount()")
Signed-off-by: Jan Prusakowski <jprusakowski@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If there are too many background IOs during f2fs_enable_checkpoint(),
sync_inodes_sb() may be blocked for long time due to it will loop to
write dirty datas which are generated by in parallel write()
continuously.
Let's change as below to resolve this issue:
- hold cp_enable_rwsem write lock to block any cache/dio write
- decrease DEF_ENABLE_INTERVAL from 16 to 5
In addition, dump more logs during f2fs_enable_checkpoint().
Testcase:
1. fill data into filesystem until 90% usage.
2. mount -o remount,checkpoint=disable:10% /data
3. fio --rw=randwrite --bs=4kb --size=1GB --numjobs=10 \
--iodepth=64 --ioengine=psync --time_based --runtime=600 \
--directory=/data/fio_dir/ &
4. mount -o remount,checkpoint=enable /data
Before:
F2FS-fs (dm-51): f2fs_enable_checkpoint() finishes, writeback:7232, sync:39793, cp:457
After:
F2FS-fs (dm-51): f2fs_enable_checkpoint end, writeback:5032, lock:0, sync_inode:5552, sync_fs:84
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to let userspace detect such error rather than suffering
silent failure.
Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Change the type of the unlock parameter of f2fs_put_page to bool.
All callers should consistently pass true or false. No logical change.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink()
Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT")
Reported-by: syzbot+632cf32276a9a564188d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=632cf32276a9a564188d
Suggested-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/all/20251022233349.102728-1-kartikey406@gmail.com/ [v1]
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing.
Fixes: a999150f4fe3 ("f2fs: use kmem_cache pool during inline xattr lookups")
Cc: stable@kernel.org
Reported-by: Hong Yun <yhong@link.cuhk.edu.hk>
Tested-by: Hong Yun <yhong@link.cuhk.edu.hk>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below:
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857
Call Trace:
<TASK>
f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3290 [inline]
f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317
do_writepages+0x38e/0x640 mm/page-writeback.c:2634
filemap_fdatawrite_wbc mm/filemap.c:386 [inline]
__filemap_fdatawrite_range mm/filemap.c:419 [inline]
file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794
f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294
generic_write_sync include/linux/fs.h:3043 [inline]
f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x7e9/0xe00 fs/read_write.c:686
ksys_write+0x19d/0x2d0 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The bug was triggered w/ below race condition:
fsync setattr ioctl
- f2fs_do_sync_file
- file_write_and_wait_range
- f2fs_write_cache_pages
: inode is non-compressed
: cc.cluster_size =
F2FS_I(inode)->i_cluster_size = 0
- tag_pages_for_writeback
- f2fs_setattr
- truncate_setsize
- f2fs_truncate
- f2fs_fileattr_set
- f2fs_setflags_common
- set_compress_context
: F2FS_I(inode)->i_cluster_size = 4
: set_inode_flag(inode, FI_COMPRESSED_FILE)
- f2fs_compressed_file
: return true
- f2fs_all_cluster_page_ready
: "pgidx % cc->cluster_size" trigger dividing 0 issue
Let's change as below to fix this issue:
- introduce a new atomic type variable .writeback in structure f2fs_inode_info
to track the number of threads which calling f2fs_write_cache_pages().
- use .i_sem lock to protect .writeback update.
- check .writeback before update compression context in f2fs_setflags_common()
to avoid race w/ ->writepages.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Cc: stable@kernel.org
Reported-by: Bai, Shuangpeng <sjb7183@psu.edu>
Tested-by: Bai, Shuangpeng <sjb7183@psu.edu>
Closes: https://lore.kernel.org/lkml/44D8F7B3-68AD-425F-9915-65D27591F93F@psu.edu
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As syzbot reported:
F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0]
------------[ cut here ]------------
kernel BUG at fs/f2fs/extent_cache.c:678!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678
Call Trace:
<TASK>
f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085
f2fs_do_zero_range fs/f2fs/file.c:1657 [inline]
f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737
f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030
vfs_fallocate+0x669/0x7e0 fs/open.c:342
ioctl_preallocate fs/ioctl.c:289 [inline]
file_ioctl+0x611/0x780 fs/ioctl.c:-1
do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576
__do_sys_ioctl fs/ioctl.c:595 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f07bc58eec9
In error path of f2fs_zero_range(), it may add a zero-sized extent
into extent cache, it should be avoided.
Fixes: 6e9619499f53 ("f2fs: support in batch fzero in dnode page")
Cc: stable@kernel.org
Reported-by: syzbot+24124df3170c3638b35f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68e5d698.050a0220.256323.0032.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Jiaming Zhang and syzbot reported, there is potential deadlock in
f2fs as below:
Chain exists of:
&sbi->cp_rwsem --> fs_reclaim --> sb_internal#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(sb_internal#2);
lock(fs_reclaim);
lock(sb_internal#2);
rlock(&sbi->cp_rwsem);
*** DEADLOCK ***
3 locks held by kswapd0/73:
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline]
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197
#2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890
stack backtrace:
CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043
check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908
__lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537
f2fs_down_read fs/f2fs/f2fs.h:2278 [inline]
f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline]
f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867
f2fs_truncate+0x489/0x7c0 fs/f2fs/file.c:925
f2fs_evict_inode+0x9f2/0x1b60 fs/f2fs/inode.c:897
evict+0x504/0x9c0 fs/inode.c:810
f2fs_evict_inode+0x1dc/0x1b60 fs/f2fs/inode.c:853
evict+0x504/0x9c0 fs/inode.c:810
dispose_list fs/inode.c:852 [inline]
prune_icache_sb+0x21b/0x2c0 fs/inode.c:1000
super_cache_scan+0x39b/0x4b0 fs/super.c:224
do_shrink_slab+0x6ef/0x1110 mm/shrinker.c:437
shrink_slab_memcg mm/shrinker.c:550 [inline]
shrink_slab+0x7ef/0x10d0 mm/shrinker.c:628
shrink_one+0x28a/0x7c0 mm/vmscan.c:4955
shrink_many mm/vmscan.c:5016 [inline]
lru_gen_shrink_node mm/vmscan.c:5094 [inline]
shrink_node+0x315d/0x3780 mm/vmscan.c:6081
kswapd_shrink_node mm/vmscan.c:6941 [inline]
balance_pgdat mm/vmscan.c:7124 [inline]
kswapd+0x147c/0x2800 mm/vmscan.c:7389
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The root cause is deadlock among four locks as below:
kswapd
- fs_reclaim --- Lock A
- shrink_one
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- iput
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_lock_op --- Lock C
ioctl
- f2fs_ioc_commit_atomic_write
- f2fs_lock_op --- Lock C
- __f2fs_commit_atomic_write
- __replace_atomic_write_block
- f2fs_get_dnode_of_data
- __get_node_folio
- f2fs_check_nid_range
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
open
- do_open
- do_truncate
- security_inode_need_killpriv
- f2fs_getxattr
- lookup_all_xattrs
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
- f2fs_commit_super
- read_mapping_folio
- filemap_alloc_folio_noprof
- prepare_alloc_pages
- fs_reclaim_acquire --- Lock A
In order to avoid such deadlock, we need to avoid grabbing sb_lock in
f2fs_handle_error(), so, let's use asynchronous method instead:
- remove f2fs_handle_error() implementation
- rename f2fs_handle_error_async() to f2fs_handle_error()
- spread f2fs_handle_error()
Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Cc: stable@kernel.org
Reported-by: syzbot+14b90e1156b9f6fc1266@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68eae49b.050a0220.ac43.0001.GAE@google.com
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://lore.kernel.org/lkml/CANypQFa-Gy9sD-N35o3PC+FystOWkNuN8pv6S75HLT0ga-Tzgw@mail.gmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use f2fs_filemap_get_folio() instead of __filemap_get_folio() in:
- f2fs_find_data_folio
- f2fs_write_begin
- f2fs_read_merkle_tree_page
So that, we can trigger fault injection in those places.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page() in
ra_data_block() and move_data_block(), then remove f2fs_pagecache_get_page()
since it has no user.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
No logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In add_bio_entry(), adding a page to newly allocated bio should never fail,
let's use bio_add_folio_nofail() instead of bio_add_page() & unnecessary
error handling for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251201132037.22835-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The freeze_all_ptr check in filesystems_freeze_callback() introduced by
commit a3f8f8662771 ("power: always freeze efivarfs") is reverse which
quite confusingly causes all file systems to be frozen when
filesystem_freeze_enabled is false.
On my systems it causes the WARN_ON_ONCE() in __set_task_frozen() to
trigger, most likely due to an attempt to freeze a file system that is
not ready for that.
Add a logical negation to the check in question to reverse it as
appropriate.
Fixes: a3f8f8662771 ("power: always freeze efivarfs")
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12788397.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The kernel test robot reported that the exFAT remount operation
failed. The reason for the failure was that the process's umask
is different between mount and remount, causing fs_fmask and
fs_dmask are changed.
Potentially, both gid and uid may also be changed. Therefore, when
initializing fs_context for remount, inherit these mount options
from the options used during mount.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511251637.81670f5c-lkp@intel.com
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The variable max_ra_count can be 0 in exfat_allocate_bitmap(),
which causes a divide-by-zero error in the subsequent modulo operation
(i % max_ra_count), leading to a system crash.
When max_ra_count is 0, it means that readahead is not used. This patch
load the bitmap without readahead.
Fixes: 9fd688678dd8 ("exfat: optimize allocation bitmap loading time")
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Syzbot created this issue by testing an image that did not have the root
cluster bitmap bit marked. After accessing a file through the root
directory via exfat_lookup, when creating a file again with mkdir,
the root cluster bit can be allocated for direcotry, which can cause
the root cluster to be zeroed out and the same entry can be allocated
in the same cluster. This patch improved this issue by adding
exfat_test_bitmap to validate the cluster bits of the root directory
and directory. And the first cluster bit of the root directory should
never be unset except when storage is corrupted. This bit is set to
allow operations after mount.
Reported-by: syzbot+5216036fc59c43d1ee02@syzkaller.appspotmail.com
Tested-by: syzbot+5216036fc59c43d1ee02@syzkaller.appspotmail.com
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
xfstests generic/363 was failing due to unzeroed post-EOF page
cache that allowed mmap writes beyond EOF to become visible
after file extension.
For example, in following xfs_io sequence, 0x22 should not be
written to the file but would become visible after the extension:
xfs_io -f -t -c "pwrite -S 0x11 0 8" \
-c "mmap 0 4096" \
-c "mwrite -S 0x22 32 32" \
-c "munmap" \
-c "pwrite -S 0x33 512 32" \
$testfile
This violates the expected behavior where writes beyond EOF via
mmap should not persist after the file is extended. Instead, the
extended region should contain zeros.
Fix this by using truncate_pagecache() to truncate the page cache
after the current EOF when extending the file.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
