| Age | Commit message (Collapse) | Author |
|---|
|
This postpones the writeout to ocfs2_evict_inode(), which I'm told is
fine (tm).
The intent is to retire the I_WILL_FREE flag.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Tinguely <amrk.tinguely@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Notably make sure the count is 0 after the return from ->drop_inode(),
provided we are going to drop.
Inspired by suspicious games played by f2fs.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
->readpage was deprecated and reads are now on folios.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
->readpage was deprecated and reads are now on folios.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Iterate over all non-uptodate ranges of a folio mapping in a single call
to iomap_readpage_iter() instead of leaving the partial iteration to the
caller.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Store the iomap_readpage_ctx bio generically as a "void *read_ctx".
This makes the read/readahead interface more generic, which allows it to
be used by filesystems that may not be block-based and may not have
CONFIG_BLOCK set.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the read/readahead bio submission logic into a separate helper.
This is needed to make iomap read/readahead more generically usable,
especially for filesystems that do not require CONFIG_BLOCK.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the iomap_readpage_iter() bio read logic into a separate helper
function, iomap_bio_read_folio_range(). This is needed to make iomap
read/readahead more generically usable, especially for filesystems that
do not require CONFIG_BLOCK.
Additionally rename buffered write's iomap_read_folio_range() function
to iomap_bio_read_folio_range_sync() to better describe its synchronous
behavior.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most callers of iomap_iter_advance() do not need the remaining length
returned. Get rid of the extra iomap_length() call that
iomap_iter_advance() does.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
mbm_event mode
The following NULL pointer dereference is encountered on mount of resctrl fs
after booting a system that supports assignable counters with the
"rdt=!mbmtotal,!mbmlocal" kernel parameters:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:mbm_cntr_get
Call Trace:
rdtgroup_assign_cntr_event
rdtgroup_assign_cntrs
rdt_get_tree
Specifying the kernel parameter "rdt=!mbmtotal,!mbmlocal" effectively disables
the legacy X86_FEATURE_CQM_MBM_TOTAL and X86_FEATURE_CQM_MBM_LOCAL features
and the MBM events they represent. This results in the per-domain MBM event
related data structures to not be allocated during early initialization.
resctrl fs initialization follows by implicitly enabling both MBM total and
local events on a system that supports assignable counters (mbm_event mode),
but this enabling occurs after the per-domain data structures have been
created.
After booting, resctrl fs assumes that an enabled event can access all its
state. This results in NULL pointer dereference when resctrl attempts to
access the un-allocated structures of an enabled event.
Remove the late MBM event enabling from resctrl fs.
This leaves a problem where the X86_FEATURE_CQM_MBM_TOTAL and
X86_FEATURE_CQM_MBM_LOCAL features may be disabled while assignable counter
(mbm_event) mode is enabled without any events to support. Switching between
the "default" and "mbm_event" mode without any events is not practical.
Create a dependency between the X86_FEATURE_{CQM_MBM_TOTAL,CQM_MBM_LOCAL} and
X86_FEATURE_ABMC (assignable counter) hardware features. An x86 system that
supports assignable counters now requires support of X86_FEATURE_CQM_MBM_TOTAL
or X86_FEATURE_CQM_MBM_LOCAL.
This ensures all needed MBM related data structures are created before use and
that it is only possible to switch between "default" and "mbm_event" mode when
the same events are available in both modes. This dependency does not exist in
the hardware but this usage of these feature settings work for known systems.
[ bp: Massage commit message. ]
Fixes: 13390861b426e ("x86,fs/resctrl: Detect Assignable Bandwidth Monitoring feature details")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/a62e6ac063d0693475615edd213d5be5e55443e6.1760560934.git.babu.moger@amd.com
|
|
Add a mempolicy parameter to filemap_alloc_folio() to enable NUMA-aware
page cache allocations. This will be used by upcoming changes to
support NUMA policies in guest-memfd, where guest_memory need to be
allocated NUMA policy specified by VMM.
All existing users pass NULL maintaining current behavior.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/20250827175247.83322-4-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The IB_WR_REG_MR and IB_WR_LOCAL_INV operations for smbdirect_mr_io
structures should never fail because the submission or completion queues
are too small. So we allocate more send_wr depending on the (local) max
number of MRs.
While there also add additional space for ib_drain_qp().
This should make sure ib_post_send() will never fail
because the submission queue is full.
Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection")
Fixes: cc55f65dd352 ("smb: client: make use of common smbdirect_socket_parameters")
Cc: stable@vger.kernel.org
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix out-of-bounds in FS_IOC_SETFSLABEL
- Add validation for stream entry size to prevent infinite loop
* tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix out-of-bounds in exfat_nls_to_ucs2()
exfat: fix improper check of dentry.stream.valid_size
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix for FlexFiles mirror->dss allocation
- Apply delay_retrans to async operations
- Check if suid/sgid is cleared after a write when needed
- Fix setting the state renewal timer for early mounts after a reboot
* tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS4: Fix state renewals missing after boot
NFS: check if suid/sgid was cleared after a write as needed
NFS4: Apply delay_retrans to async operations
NFSv4/flexfiles: fix to allocate mirror->dss before use
|
|
Pull smb client fixes from Steve French:
"smb client fixes, security and smbdirect improvements, and some minor cleanup:
- Important OOB DFS fix
- Fix various potential tcon refcount leaks
- smbdirect (RDMA) fixes (following up from test event a few weeks
ago):
- Fixes to improve and simplify handling of memory lifetime of
smbdirect_mr_io structures, when a connection gets disconnected
- Make sure we really wait to reach SMBDIRECT_SOCKET_DISCONNECTED
before destroying resources
- Make sure the send/recv submission/completion queues are large
enough to avoid ib_post_send() from failing under pressure
- convert cifs.ko to use the recommended crypto libraries (instead of
crypto_shash), this also can improve performance
- Three small cleanup patches"
* tag '6.18-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: Consolidate cmac(aes) shash allocation
smb: client: Remove obsolete crypto_shash allocations
smb: client: Use HMAC-MD5 library for NTLMv2
smb: client: Use MD5 library for SMB1 signature calculation
smb: client: Use MD5 library for M-F symlink hashing
smb: client: Use HMAC-SHA256 library for SMB2 signature calculation
smb: client: Use HMAC-SHA256 library for key generation
smb: client: Use SHA-512 library for SMB3.1.1 preauth hash
cifs: parse_dfs_referrals: prevent oob on malformed input
smb: client: Fix refcount leak for cifs_sb_tlink
smb: client: let smbd_destroy() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: move some duplicate definitions to common/cifsglob.h
smb: client: let destroy_mr_list() keep smbdirect_mr_io memory if registered
smb: client: let destroy_mr_list() call ib_dereg_mr() before ib_dma_unmap_sg()
smb: client: call ib_dma_unmap_sg if mr->sgt.nents is not 0
smb: client: improve logic in smbd_deregister_mr()
smb: client: improve logic in smbd_register_mr()
smb: client: improve logic in allocate_mr_list()
smb: client: let destroy_mr_list() remove locked from the list
smb: client: let destroy_mr_list() call list_del(&mr->list)
...
|
|
Commit 29d6d30f5c8a ("Btrfs: send, don't send rmdir for same target
multiple times") has fixed an issue that a send stream contained a rmdir
operation for the same directory multiple times. After that fix we keep
track of the last directory for which we sent a rmdir operation and
compare with it before sending a rmdir for the parent inode of a deleted
hardlink we are processing. But there is still a corner case that in
between rmdir dir operations for the same inode we find deleted hardlinks
for other parent inodes, so tracking just the last inode for which we sent
a rmdir operation is not enough.
Hardlinks of a file in the same directory are stored in the same INODE_REF
item, but if the number of hardlinks is too large and can not fit in a
leaf, we use INODE_EXTREF items to store them. The key of an INODE_EXTREF
item is (inode_id, INODE_EXTREF, hash[name, parent ino]), so between two
hardlinks for the same parent directory, we can find others for other
parent directories. For example for the reproducer below we get the
following (from a btrfs inspect-internal dump-tree output):
item 0 key (259 INODE_EXTREF 2309449) itemoff 16257 itemsize 26
index 6925 parent 257 namelen 8 name: foo.6923
item 1 key (259 INODE_EXTREF 2311350) itemoff 16231 itemsize 26
index 6588 parent 258 namelen 8 name: foo.6587
item 2 key (259 INODE_EXTREF 2457395) itemoff 16205 itemsize 26
index 6611 parent 257 namelen 8 name: foo.6609
(...)
So tracking the last directory's inode number does not work in this case
since we process a link for parent inode 257, then for 258 and then back
again for 257, and that second time we process a deleted link for 257 we
think we have not yet sent a rmdir operation.
Fix this by using a rbtree to keep track of all the directories for which
we have already sent rmdir operations, and add those directories to the
'check_dirs' ref list in process_recorded_refs() only if the directory is
not yet in the rbtree, otherwise skip it since it means we have already
sent a rmdir operation for that directory.
The following test script reproduces the problem:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/a $MNT/b
echo 123 > $MNT/a/foo
for ((i = 1; i <= 1000; i++)); do
ln $MNT/a/foo $MNT/a/foo.$i
ln $MNT/a/foo $MNT/b/foo.$i
done
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send $MNT/snap1 -f /tmp/base.send
rm -r $MNT/a $MNT/b
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -p $MNT/snap1 $MNT/snap2 -f /tmp/incremental.send
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive $MNT -f /tmp/base.send
btrfs receive $MNT -f /tmp/incremental.send
rm -f /tmp/base.send /tmp/incremental.send
umount $MNT
When running it, it fails like this:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: rmdir o257-9-0 failed: No such file or directory
CC: <stable@vger.kernel.org>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Ting-Chang Hou <tchou@synology.com>
[ Updated changelog ]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
syzkaller reported the following information:
------------[ cut here ]------------
BUG: unable to handle page fault for address: fffffffffffffbb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline]
RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline]
RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline]
RIP: 0010:refcount_read include/linux/refcount.h:170 [inline]
RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230
[...]
Call Trace:
<TASK>
btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280
btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029
btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097
vfs_get_tree+0x98/0x320 fs/super.c:1759
do_new_mount+0x357/0x660 fs/namespace.c:3899
path_mount+0x716/0x19c0 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount fs/namespace.c:4427 [inline]
__x64_sys_mount+0x28c/0x310 fs/namespace.c:4427
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f032eaffa8d
[...]
Fixes: 3bb17a25bcb0 ("btrfs: add get_tree callback for new mount API")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dewei Meng <mengdewei@cqsoftware.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix uninit errors caused after buffer allocation given to 'de'; by
initializing the buffer with zeroes. The fix was found by using KMSAN.
Reported-by: syzbot+332bd4e9d148f11a87dc@syzkaller.appspotmail.com
Fixes: 78ab59fee07f2 ("fs/ntfs3: Rework file operations")
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Fix a KMSAN un-init bug found by syzkaller.
ntfs_get_bh() expects a buffer from sb_getblk(), that buffer may not be
uptodate. We do not bring the buffer uptodate before setting it as
uptodate. If the buffer were to not be uptodate, it could mean adding a
buffer with un-init data to the mi record. Attempting to load that record
will trigger KMSAN.
Avoid this by setting the buffer as uptodate, if it’s not already, by
overwriting it.
Reported-by: syzbot+7a2ba6b7b66340cff225@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7a2ba6b7b66340cff225
Tested-by: syzbot+7a2ba6b7b66340cff225@syzkaller.appspotmail.com
Fixes: 4342306f0f0d5 ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The root cause is that sbi->options points directly to fc->fs_private.
If fc->fs_private is freed while sbi still exists, sbi->options becomes
a dangling pointer.
This patch ensures that sbi->options is a separate copy of fc->fs_private
and duplicates nls_name if present. On superblock release or error,
sbi->options->nls_name and sbi->options are freed and sbi->options
is set to NULL to avoid any dangling pointer.
Reported-by: syzbot+d77c546c60db651a389c@syzkaller.appspotmail.com
Signed-off-by: YangWen <anmuxixixi@gmail.com>
[almaz.alexandrovich@paragon-software.com: remove syzbot logs from description]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
When reading a compressed file, we may read several pages in addition to
the one requested. The current code will overwrite pages in the page
cache with the data from disc which can definitely result in changes
that have been made being lost.
For example if we have four consecutie pages ABCD in the file compressed
into a single extent, on first access, we'll bring in ABCD. Then we
write to page B. Memory pressure results in the eviction of ACD.
When we attempt to write to page C, we will overwrite the data in page
B with the data currently on disk.
I haven't investigated the decompression code to check whether it's
OK to overwrite a clean page or whether it might be possible to see
corrupt data. Out of an abundance of caution, decline to overwrite
uptodate pages, not just dirty pages.
Fixes: 4342306f0f0d (fs/ntfs3: Add file operations and implementation)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
These pages are accessed through vmap; they are not accessed
by calling page_address(), so they do not need to be kmapped.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
These pages are accessed through DMA and vmap; they are not accessed
by calling page_address(), so they do not need to be kmapped.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Some NTFS volumes failed to mount because sparse data runs were not
handled correctly during runlist unpacking. The code performed arithmetic
on the special SPARSE_LCN64 marker, leading to invalid LCN values and
mount errors.
Add an explicit check for the case described above, marking the run as
sparse without applying arithmetic.
Fixes: 736fc7bf5f68 ("fs: ntfs3: Fix integer overflow in run_unpack()")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Reformatted the driver code according to the current .clang-format rules
and updated description of used terminology. No functional changes
intended.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Before it used an unsigned 64-bit type, which prevented proper handling
of timestamps earlier than 1970-01-01. Switch to a signed 64-bit type to
support pre-epoch timestamps. The issue was caught by xfstests.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for
phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can
hit WARN_ON() when trying to change owner of a file that isn't visible.
See the trace below:
WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30
CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f
Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025
RIP: 0010:__dev_change_net_namespace+0xb89/0xc30
[...]
Call Trace:
<TASK>
? if6_seq_show+0x30/0x50
do_setlink.isra.0+0xc7/0x1270
? __nla_validate_parse+0x5c/0xcc0
? security_capable+0x94/0x1a0
rtnl_newlink+0x858/0xc20
? update_curr+0x8e/0x1c0
? update_entity_lag+0x71/0x80
? sched_balance_newidle+0x358/0x450
? psi_task_switch+0x113/0x2a0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x346/0x3e0
? sched_clock+0x10/0x30
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? __sys_bind+0xe3/0x110
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? sock_alloc_file+0x63/0xc0
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? alloc_fd+0x12e/0x190
? put_unused_fd+0x2a/0x70
? do_sys_openat2+0xa2/0xe0
? syscall_exit_work+0x143/0x1b0
? do_syscall_64+0x244/0x970
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
Fix this by checking is_visible() before trying to touch the attribute.
Fixes: 303a42769c4c ("sysfs: add sysfs_group{s}_change_owner()")
Fixes: 0c17270f9b92 ("net: sysfs: Implement is_visible for phys_(port_id, port_name, switch_id)")
Reported-by: Cynthia <cynthia@kosmx.dev>
Closes: https://lore.kernel.org/netdev/01070199e22de7f8-28f711ab-d3f1-46d9-b9a0-048ab05eb09b-000000@eu-central-1.amazonses.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20251016101456.4087-1-fmancera@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Robert recently reported two corrupted images that can cause system
crashes, which are related to the new encoded extents introduced
in Linux 6.15:
- The first one [1] has plen != 0 (e.g. plen == 0x2000000) but
(plen & Z_EROFS_EXTENT_PLEN_MASK) == 0. It is used to represent
special extents such as sparse extents (!EROFS_MAP_MAPPED), but
previously only plen == 0 was handled;
- The second one [2] has pa 0xffffffffffdcffed and plen 0xb4000,
then "cur [0xfffffffffffff000] += bvec.bv_len [0x1000]" in
"} while ((cur += bvec.bv_len) < end);" wraps around, causing an
out-of-bound access of pcl->compressed_bvecs[] in
z_erofs_submit_queue(). EROFS only supports 48-bit physical block
addresses (up to 1EiB for 4k blocks), so add a sanity check to
enforce this.
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/75022.1759355830@localhost [1]
Closes: https://lore.kernel.org/r/80524.1760131149@localhost [2]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix soft lockupg caused by iput() added in bc986b1d756482a ("fs: stop
accessing ->i_count directly in f2fs and gfs2")
- fix a wrong block address map on multiple devices
Link: https://lore.kernel.org/oe-lkp/202509301450.138b448f-lkp@intel.com [1]
* tag 'f2fs-fix-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix wrong block mapping for multi-devices
f2fs: don't call iput() from f2fs_drop_inode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in tree-checker fix extref bounds check
- reorder send context structure to avoid
-Wflex-array-member-not-at-end warning
- fix extent readahead length for compressed extents
- fix memory leaks on error paths (qgroup assign ioctl, zone loading
with raid stripe tree enabled)
- fix how device specific mount options are applied, in particular the
'ssd' option will be set unexpectedly
- fix tracking of relocation state when tasks are running and
cancellation is attempted
- adjust assertion condition for folios allocated for scrub
- remove incorrect assertion checking for block group when populating
free space tree
* tag 'for-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctx
btrfs: tree-checker: fix bounds check in check_inode_extref()
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
btrfs: fix incorrect readahead expansion length
btrfs: do not assert we found block group item when creating free space tree
btrfs: do not use folio_test_partial_kmap() in ASSERT()s
btrfs: only set the device specific options after devices are opened
btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl
btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running
|
|
Pull smb server fixes from Steve French:
- Fix RPC hang due to locking bug
- Fix for memory leak in read and refcount leak (in session setup)
- Minor cleanup
* tag 'v6.18-rc1-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix recursive locking in RPC handle list access
smb/server: fix possible refcount leak in smb2_sess_setup()
smb/server: fix possible memory leak in smb2_read()
smb: server: Use common error handling code in smb_direct_rdma_xmit()
|
|
Now that smb3_crypto_shash_allocate() and smb311_crypto_shash_allocate()
are identical and only allocate "cmac(aes)", delete the latter and
replace the call to it with the former.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now that the SMB client accesses MD5, HMAC-MD5, HMAC-SHA256, and SHA-512
only via the library API and not via crypto_shash, allocating
crypto_shash objects for these algorithms is no longer necessary.
Remove all these allocations, their corresponding kconfig selections,
and their corresponding module soft dependencies.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For the HMAC-MD5 computations in NTLMv2, use the HMAC-MD5 library
instead of a "hmac(md5)" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the HMAC-MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To preserve the existing behavior of NTLMv2 support being disabled when
the kernel is booted with "fips=1", make setup_ntlmv2_rsp() check
fips_enabled itself. Previously it relied on the error from
cifs_alloc_hash("hmac(md5)", &hmacmd5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert cifs_calc_signature() to use the MD5 library instead of a "md5"
crypto_shash. This is simpler and faster. With the library there's no
need to allocate memory, no need to handle errors, and the MD5 code is
accessed directly without inefficient indirect calls and other
unnecessary API overhead.
To preserve the existing behavior of MD5 signature support being
disabled when the kernel is booted with "fips=1", make
cifs_calc_signature() check fips_enabled itself. Previously it relied
on the error from cifs_alloc_hash("md5", &server->secmech.md5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert parse_mf_symlink() and format_mf_symlink() to use the MD5
library instead of a "md5" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
This also fixes an issue where these functions did not work on kernels
booted in FIPS mode. The use of MD5 here is for data integrity rather
than a security purpose, so it can use a non-FIPS-approved algorithm.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert smb2_calc_signature() to use the HMAC-SHA256 library instead of
a "hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To make this possible, make __cifs_calc_signature() support both the
HMAC-SHA256 library and crypto_shash. (crypto_shash is still needed for
HMAC-MD5 and AES-CMAC. A later commit will switch HMAC-MD5 from shash
to the library. I'd like to eventually do the same for AES-CMAC, but it
doesn't have a library API yet. So for now, shash is still needed.)
Also remove the unnecessary 'sigptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert generate_key() to use the HMAC-SHA256 library instead of a
"hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
Also remove the unnecessary 'hashptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert smb311_update_preauth_hash() to use the SHA-512 library instead
of a "sha512" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the SHA-512 code is accessed directly without inefficient indirect
calls and other unnecessary API overhead.
Remove the call to smb311_crypto_shash_allocate() from
smb311_update_preauth_hash(), since it appears to have been needed only
to allocate the "sha512" crypto_shash. (It also had the side effect of
allocating the "cmac(aes)" crypto_shash, but that's also done in
generate_key() which is where the AES-CMAC key is initialized.)
For now the "sha512" crypto_shash is still being allocated elsewhere.
It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s.
Signed-off-by: Eugene Korenevsky <ekorenevsky@aliyun.com>
Cc: stable@vger.kernel.org
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
Fixes: 8ceb98437946 ("CIFS: Move rename to ops struct")
Fixes: 2f1afe25997f ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions")
Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
Cc: stable@vger.kernel.org
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
|
|
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk.
Link: https://lore.kernel.org/all/20251009142917.517229-1-kartikey406@gmail.com/T/
Link: https://lkml.kernel.org/r/20251009154903.522339-1-kartikey406@gmail.com
Fixes: 53069d4e7695 ("Ocfs2/move_extents: move/defrag extents within a certain range.")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Tested-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2959889e1f6e216585ce522f7e8bc002b46ad9e7
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED,
it turns out that (at least running some xfstests e.g. cifs/001)
often triggers the case where wait_event_interruptible() returns
with -ERESTARTSYS instead of waiting for SMBDIRECT_SOCKET_DISCONNECTED
to be reached.
Or we are already in SMBDIRECT_SOCKET_DISCONNECTING and never wait
for SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: 050b8c374019 ("smbd: Make upper layer decide when to destroy the transport")
Fixes: e8b3bfe9bc65 ("cifs: smbd: Don't destroy transport on RDMA disconnect")
Fixes: b0aa92a229ab ("smb: client: make sure smbd_disconnect_rdma_work() doesn't run after smbd_destroy() took over")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
In order to maintain the code more easily, move duplicate definitions to
new common header file.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If a smbdirect_mr_io structure if still visible to callers of
smbd_register_mr() we can't free the related memory when the
connection is disconnected! Otherwise smbd_deregister_mr()
will crash.
Now we use a mutex and refcounting in order to keep the
memory around if the connection is disconnected.
It means smbd_deregister_mr() can be called at any later time to free
the memory, which is no longer referenced by nor referencing the
connection.
It also means smbd_destroy() no longer needs to wait for
mr_io.used.count to become 0.
Fixes: 050b8c374019 ("smbd: Make upper layer decide when to destroy the transport")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reference count of ksmbd_session will leak when session need reconnect.
Fix this by adding the missing ksmbd_user_session_put().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
