| Age | Commit message (Collapse) | Author |
|---|
|
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reference count of ksmbd_session will leak when session need reconnect.
Fix this by adding the missing ksmbd_user_session_put().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the len argument value passed to exfat_ioctl_set_volume_label()
from exfat_nls_to_utf16() is passed 1 too large, an out-of-bounds read
occurs when dereferencing p_cstring in exfat_nls_to_ucs2() later.
And because of the NLS_NAME_OVERLEN macro, another error occurs when
creating a file with a period at the end using utf8 and other iocharsets.
So to avoid this, you should remove the code that uses NLS_NAME_OVERLEN
macro and make the len argument value be the length of the label string,
but with a maximum length of FSLABEL_MAX - 1.
Reported-by: syzbot+98cc76a76de46b3714d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=98cc76a76de46b3714d4
Fixes: d01579d590f7 ("exfat: Add support for FS_IOC_{GET,SET}FSLABEL")
Suggested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crasher reported by rtm@csail.mit.edu
* tag 'nfsd-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Define a proc_layoutcommit for the FlexFiles layout type
|
|
Assuming the disk layout as below,
disk0: 0 --- 0x00035abfff
disk1: 0x00035ac000 --- 0x00037abfff
disk2: 0x00037ac000 --- 0x00037ebfff
and we want to read data from offset=13568 having len=128 across the block
devices, we can illustrate the block addresses like below.
0 .. 0x00037ac000 ------------------- 0x00037ebfff, 0x00037ec000 -------
| ^ ^ ^
| fofs 0 13568 13568+128
| ------------------------------------------------------
| LBA 0x37e8aa9 0x37ebfa9 0x37ec029
--- map 0x3caa9 0x3ffa9
In this example, we should give the relative map of the target block device
ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by
0x37ebfff + 1 - 0x37ebfa9.
In the below equation, however, map->m_pblk was supposed to be the original
address instead of the one from the target block address.
- map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk);
Cc: stable@vger.kernel.org
Fixes: 71f2c8206202 ("f2fs: multidevice: support direct IO")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
iput() calls the problematic routine, which does a ->i_count inc/dec
cycle. Undoing it with iput() recurses into the problem.
Note f2fs should not be playing games with the refcount to begin with,
but that will be handled later. Right now solve the immediate
regression.
Fixes: bc986b1d756482a ("fs: stop accessing ->i_count directly in f2fs and gfs2")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509301450.138b448f-lkp@intel.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The warning -Wflex-array-member-not-at-end was introduced in GCC-14, and
we are getting ready to enable it, globally.
Fix the following warning:
fs/btrfs/send.c:181:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
and move the declaration of send_ctx::cur_inode_path to the end.
Notice that struct fs_path contains a flexible array member inline_buf,
but also a padding array and a limit calculated for the usable space of
inline_buf (FS_PATH_INLINE_SIZE). It is not the pattern where flexible
array is in the middle of a structure and could potentially overwrite
other members.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parentheses for the unlikely() annotation were put in the wrong
place so it means that the condition is basically never true and the
bounds checking is skipped.
Fixes: aab9458b9f00 ("btrfs: tree-checker: add inode extref checks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
Fixes: 5906333cc4af ("btrfs: zoned: don't skip block group profile checks on conventional zones")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The intent of btrfs_readahead_expand() was to expand to the length of
the current compressed extent being read. However, "ram_bytes" is *not*
that, in the case where a single physical compressed extent is used for
multiple file extents.
Consider this case with a large compressed extent C and then later two
non-compressed extents N1 and N2 written over C, leaving C1 and C2
pointing to offset/len pairs of C:
[ C ]
[ N1 ][ C1 ][ N2 ][ C2 ]
In such a case, ram_bytes for both C1 and C2 is the full uncompressed
length of C. So starting readahead in C1 will expand the readahead past
the end of C1, past N2, and into C2. This will then expand readahead
again, to C2_start + ram_bytes, way past EOF. First of all, this is
totally undesirable, we don't want to read the whole file in arbitrary
chunks of the large underlying extent if it happens to exist. Secondly,
it results in zeroing the range past the end of C2 up to ram_bytes. This
is particularly unpleasant with fs-verity as it can zero and set
uptodate pages in the verity virtual space past EOF. This incorrect
readahead behavior can lead to verity verification errors, if we iterate
in a way that happens to do the wrong readahead.
Fix this by using em->len for readahead expansion, not em->ram_bytes,
resulting in the expected behavior of stopping readahead at the extent
boundary.
Reported-by: Max Chernoff <git@maxchernoff.ca>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898
Fixes: 9e9ff875e417 ("btrfs: use readahead_expand() on compressed extents")
CC: stable@vger.kernel.org # 6.17
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Reported-by: syzbot+884dc4621377ba579a6f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/68dc3dab.a00a0220.102ee.004e.GAE@google.com/
Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree")
CC: <stable@vger.kernel.org> # 6.1.x: 1961d20f6fa8: btrfs: fix assertion when building free space tree
CC: <stable@vger.kernel.org> # 6.1.x
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported an ASSERT() triggered inside scrub:
BTRFS info (device loop0): scrub: started on devid 1
assertion failed: !folio_test_partial_kmap(folio) :: 0, in fs/btrfs/scrub.c:697
------------[ cut here ]------------
kernel BUG at fs/btrfs/scrub.c:697!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6077 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:scrub_stripe_get_kaddr+0x1bb/0x1c0 fs/btrfs/scrub.c:697
Call Trace:
<TASK>
scrub_bio_add_sector fs/btrfs/scrub.c:932 [inline]
scrub_submit_initial_read+0xf21/0x1120 fs/btrfs/scrub.c:1897
submit_initial_group_read+0x423/0x5b0 fs/btrfs/scrub.c:1952
flush_scrub_stripes+0x18f/0x1150 fs/btrfs/scrub.c:1973
scrub_stripe+0xbea/0x2a30 fs/btrfs/scrub.c:2516
scrub_chunk+0x2a3/0x430 fs/btrfs/scrub.c:2575
scrub_enumerate_chunks+0xa70/0x1350 fs/btrfs/scrub.c:2839
btrfs_scrub_dev+0x6e7/0x10e0 fs/btrfs/scrub.c:3153
btrfs_ioctl_scrub+0x249/0x4b0 fs/btrfs/ioctl.c:3163
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
Which doesn't make much sense, as all the folios we allocated for scrub
should not be highmem.
[CAUSE]
Thankfully syzbot has a detailed kernel config file, showing that
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is set to y.
And that debug option will force all folio_test_partial_kmap() to return
true, to improve coverage on highmem tests.
But in our case we really just want to make sure the folios we allocated
are not highmem (and they are indeed not). Such incorrect result from
folio_test_partial_kmap() is just screwing up everything.
[FIX]
Replace folio_test_partial_kmap() to folio_test_highmem() so that we
won't bother those highmem specific debuging options.
Fixes: 5fbaae4b8567 ("btrfs: prepare scrub to support bs > ps cases")
Reported-by: syzbot+bde59221318c592e6346@syzkaller.appspotmail.com
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With v6.17-rc kernels, btrfs will always set 'ssd' mount option even if
the block device is not a rotating one:
# cat /sys/block/sdd/queue/rotational
1
# cat /etc/fstab:
LABEL=DATA2 /data2 btrfs rw,relatime,space_cache=v2,subvolid=5,subvol=/,nofail,nosuid,nodev 0 0
# mount
[...]
/dev/sdd on /data2 type btrfs (rw,nosuid,nodev,relatime,ssd,space_cache=v2,subvolid=5,subvol=/)
[CAUSE]
The 'ssd' mount option is set by set_device_specific_options(), and it
expects that if there is any rotating device in the btrfs, it will set
fs_devices::rotating.
However after commit bddf57a70781 ("btrfs: delay btrfs_open_devices()
until super block is created"), the device opening is delayed until the
super block is created.
But the timing of set_device_specific_options() is still left as is,
this makes the function be called without any device opened.
Since no device is opened, thus fs_devices::rotating will never be set,
making btrfs incorrectly set 'ssd' mount option.
[FIX]
Only call set_device_specific_options() after btrfs_open_devices().
Also only call set_device_specific_options() after a new mount, if we're
mounting a mounted btrfs, there is no need to set the device specific
mount options again.
Reported-by: HAN Yuwei <hrx@bupt.moe>
Link: https://lore.kernel.org/linux-btrfs/C8FF75669DFFC3C5+5f93bf8a-80a0-48a6-81bf-4ec890abc99a@bupt.moe/
Fixes: bddf57a70781 ("btrfs: delay btrfs_open_devices() until super block is created")
CC: stable@vger.kernel.org # 6.17
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as
provided by the user, which is kfree'd in the end. But this was not the
case when allocating memory for 'prealloc'. In this case, if it somehow
failed, then the previous code would go directly into calling
'mnt_drop_write_file', without freeing the string duplicated from the
user space.
Fixes: 4addc1ffd67a ("btrfs: qgroup: preallocate memory before adding a relation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When starting relocation, at reloc_chunk_start(), if we happen to find
the flag BTRFS_FS_RELOC_RUNNING is already set we return an error
(-EINPROGRESS) to the callers, however the callers call reloc_chunk_end()
which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since
relocation was started by another task and still running.
Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected
scenario, but still our current behaviour is not correct.
Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has
returned an error, which is what logically makes sense, since the general
widespread pattern is to have end functions called only if the counterpart
start functions succeeded. This requires changing reloc_chunk_start() to
clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request.
Fixes: 907d2710d727 ("btrfs: add cancellable chunk relocation support")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the last renewal time was initialized to 0 and jiffies start
counting at -5 minutes, any clients connected in the first 5 minutes
after a reboot would have their renewal timer set to a very long
interval. If the connection was idle, this would result in the client
state timing out on the server and the next call to the server would
return NFS4ERR_BADSESSION.
Fix this by initializing the last renewal time to the current jiffies
instead of 0.
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
I noticed xfstests generic/193 and generic/355 started failing against
knfsd after commit e7a8ebc305f2 ("NFSD: Offer write delegation for OPEN
with OPEN4_SHARE_ACCESS_WRITE").
I ran those same tests against ONTAP (which has had write delegation
support for a lot longer than knfsd) and they fail there too... so
while it's a new failure against knfsd, it isn't an entirely new
failure.
Add the NFS_INO_REVAL_FORCED flag so that the presence of a delegation
doesn't keep the inode from being revalidated to fetch the updated mode.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The setting of delay_retrans is applied to synchronous RPC operations
because the retransmit count is stored in same struct nfs4_exception
that is passed each time an error is checked. However, for asynchronous
operations (READ, WRITE, LOCKU, CLOSE, DELEGRETURN), a new struct
nfs4_exception is made on the stack each time the task callback is
invoked. This means that the retransmit count is always zero and thus
delay_retrans never takes effect.
Apply delay_retrans to these operations by tracking and updating their
retransmit count.
Change-Id: Ieb33e046c2b277cb979caa3faca7f52faf0568c9
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Move mirror_array's dss_count initialization and dss allocation to
ff_layout_alloc_mirror(), just before the loop that initializes each
nfs4_ff_layout_ds_stripe's nfs_file_localio.
Also handle NULL return from kcalloc() and remove one level of indent
in ff_layout_alloc_mirror().
This commit fixes dangling nfsd_serv refcount issues seen when using
NFS LOCALIO and then attempting to stop the NFSD service.
Fixes: 20b1d75fb840 ("NFSv4/flexfiles: Add support for striped layouts")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This is more consistent as we call ib_dma_unmap_sg() only
when the memory is no longer registered.
This is the same pattern as calling ib_dma_unmap_sg() after
IB_WR_LOCAL_INV.
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This seems to be the more reliable way to check if we need to
call ib_dma_unmap_sg().
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- style fixes
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- style fixes
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- use goto lables for easier cleanup
- use destroy_mr_list()
- style fixes
- INIT_WORK(&sc->mr_io.recovery_work, smbd_mr_recovery_work) on success
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This should make sure get_mr() can't see the removed entries.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This makes the code clearer and will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
No callers checks the return value and this makes further
changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be used in the next commits in order to improve the
client code.
A broken connection can just disable the smbdirect_mr_io while
keeping the memory arround for the caller.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The local variable “rc” is assigned a value in an if branch without
using it before it is reassigned there.
Thus delete this assignment statement.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Return a status code without storing it in an intermediate variable.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add two jump targets so that a bit of exception handling can be better
reused at the end of this function implementation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull hpfs updates from Mikulas Patocka:
- Avoid -Wflex-array-member-not-at-end warnings
- Replace simple_strtoul with kstrtoint
- Fix error code for new_inode() failure
* tag 'for-6.18/hpfs-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
fs/hpfs: Fix error code for new_inode() failure in mkdir/create/mknod/symlink
hpfs: Replace simple_strtoul with kstrtoint in hpfs_parse_param
fs: hpfs: Avoid multiple -Wflex-array-member-not-at-end warnings
|
|
Orphan info is now getting allocated with kvmalloc_array(). Free it with
kvfree() instead of kfree() to avoid complaints from mm.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 0a6ce20c1564 ("ext4: verify orphan file size is not too big")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20251007134936.7291-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity
file on a corrupted ext4 filesystem mounted without a journal.
The issue is that the filesystem has an inode with both the INLINE_DATA
and EXTENTS flags set:
EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15:
comm syz.0.17: corrupted extent tree: lblk 0 < prev 66
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode.
Cc: stable@kernel.org
Reported-and-tested-by: syzbot+038b7bf43423e132b308@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=038b7bf43423e132b308
Suggested-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250930112810.315095-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pull ceph updates from Ilya Dryomov:
- some messenger improvements (Eric and Max)
- address an issue (also affected userspace) of incorrect permissions
being granted to users who have access to multiple different CephFS
instances within the same cluster (Kotresh)
- a bunch of assorted CephFS fixes (Slava)
* tag 'ceph-for-6.18-rc1' of https://github.com/ceph/ceph-client:
ceph: add bug tracking system info to MAINTAINERS
ceph: fix multifs mds auth caps issue
ceph: cleanup in ceph_alloc_readdir_reply_buffer()
ceph: fix potential NULL dereference issue in ceph_fill_trace()
libceph: add empty check to ceph_con_get_out_msg()
libceph: pass the message pointer instead of loading con->out_msg
libceph: make ceph_con_get_out_msg() return the message pointer
ceph: fix potential race condition on operations with CEPH_I_ODIRECT flag
ceph: refactor wake_up_bit() pattern of calling
ceph: fix potential race condition in ceph_ioctl_lazyio()
ceph: fix overflowed constant issue in ceph_do_objects_copy()
ceph: fix wrong sizeof argument issue in register_session()
ceph: add checking of wait_for_completion_killable() return value
ceph: make ceph_start_io_*() killable
libceph: Use HMAC-SHA256 library instead of crypto_shash
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix i_size in fallocate
- two truncate fixes
- utime fix
- minor cleanups
- SMB1 fixes
- improve error check in read
- improve perf of copy file_range (copy_chunk)
* tag 'v6.18-rc-part2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: Add comments for DeletePending assignments in open functions
cifs: Add fallback code path for cifs_mkdir_setinfo()
cifs: Allow fallback code in smb_set_file_info() also for directories
cifs: Query EA $LXMOD in cifs_query_path_info() for WSL reparse points
smb: client: remove cfids_invalidation_worker
smb: client: remove redudant assignment in cifs_strict_fsync()
smb: client: fix race with fallocate(2) and AIO+DIO
smb: client: fix missing timestamp updates after utime(2)
smb: client: fix missing timestamp updates after ftruncate(2)
smb: client: fix missing timestamp updates with O_TRUNC
cifs: Fix copy_to_iter return value check
smb: client: batch SRV_COPYCHUNK entries to cut round trips
smb: client: Omit an if branch in smb2_find_smb_tcon()
smb: client: Return directly after a failed genlmsg_new() in cifs_swn_send_register_message()
smb: client: Use common code in cifs_do_create()
smb: client: Improve unlocking of a mutex in cifs_get_swn_reg()
smb: client: Return a status code only as a constant in cifs_spnego_key_instantiate()
smb: client: Use common code in cifs_lookup()
smb: client: Reduce the scopes for a few variables in two functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Don't include __GFP_NOWARN for loop worker allocation, as it already
uses GFP_NOWAIT which has __GFP_NOWARN set already
- Small series cleaning up the recent bio_iov_iter_get_pages() changes
- loop fix for leaking the backing reference file, if validation fails
- Update of a comment pertaining to disk/partition stat locking
* tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: remove redundant __GFP_NOWARN flag
block: move bio_iov_iter_get_bdev_pages to block/fops.c
iomap: open code bio_iov_iter_get_bdev_pages
block: rename bio_iov_iter_get_pages_aligned to bio_iov_iter_get_pages
block: remove bio_iov_iter_get_pages
block: Update a comment of disk statistics
loop: fix backing file reference leak on validation error
|
|
When freeing metadata blocks in nojournal mode, ext4_forget() calls
bforget() to clear the dirty flag on the buffer_head and remvoe
associated mappings. This is acceptable if the metadata has not yet
begun to be written back. However, if the write-back has already started
but is not yet completed, ext4_forget() will have no effect.
Subsequently, ext4_mb_clear_bb() will immediately return the block to
the mb allocator. This block can then be reallocated immediately,
potentially causing an data corruption issue.
Fix this by clearing the buffer's dirty flag and waiting for the ongoing
I/O to complete, ensuring that no further writes to stale data will
occur.
Fixes: 16e08b14a455 ("ext4: cleanup clean_bdev_aliases() calls")
Cc: stable@kernel.org
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Closes: https://lore.kernel.org/linux-ext4/a9417096-9549-4441-9878-b1955b899b4e@huaweicloud.com/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250916093337.3161016-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When releasing file system metadata blocks in jbd2_journal_forget(), if
this buffer has not yet been checkpointed, it may have already been
written back, currently be in the process of being written back, or has
not yet written back. jbd2_journal_forget() calls
jbd2_journal_try_remove_checkpoint() to check the buffer's status and
add it to the current transaction if it has not been written back. This
buffer can only be reallocated after the transaction is committed.
jbd2_journal_try_remove_checkpoint() attempts to lock the buffer and
check its dirty status while holding the buffer lock. If the buffer has
already been written back, everything proceeds normally. However, there
are two issues. First, the function returns immediately if the buffer is
locked by the write-back process. It does not wait for the write-back to
complete. Consequently, until the current transaction is committed and
the block is reallocated, there is no guarantee that the I/O will
complete. This means that ongoing I/O could write stale metadata to the
newly allocated block, potentially corrupting data. Second, the function
unlocks the buffer as soon as it detects that the buffer is still dirty.
If a concurrent write-back occurs immediately after this unlocking and
before clear_buffer_dirty() is called in jbd2_journal_forget(), data
corruption can theoretically still occur.
Although these two issues are unlikely to occur in practice since the
undergoing metadata writeback I/O does not take this long to complete,
it's better to explicitly ensure that all ongoing I/O operations are
completed.
Fixes: 597599268e3b ("jbd2: discard dirty data when forgetting an un-journalled buffer")
Cc: stable@kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250916093337.3161016-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT
operation on a FlexFiles layout.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-nfs/152f99b2-ba35-4dec-93a9-4690e625dccd@oracle.com/T/#t
Cc: Thomas Haynes <loghyr@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 9b9960a0ca47 ("nfsd: Add a super simple flex file server")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
to 2.57
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The backing_file_write_iter() function, which is called
immediately after this code, already contains identical
logic to clear the IOCB_DIO_CALLER_COMP flag along with
the same explanatory comment. There is no need to duplicate
this operation in the overlayfs code.
Signed-off-by: Seong-Gwang Heo <heo@mykernel.net>
Fixes: a6293b3e285c ("fs: factor out backing_file_{read,write}_iter() helpers")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
These syscalls call to vfs_fileattr_get/set functions which return
ENOIOCTLCMD if filesystem doesn't support setting file attribute on an
inode. For syscalls EOPNOTSUPP would be more appropriate return error.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This reverts commit 474b155adf3927d2c944423045757b54aa1ca4de.
This patch caused regression in ioctl_setflags(). Underlying filesystems
use EOPNOTSUPP to indicate that flag is not supported. This error is
also gets converted in ioctl_setflags(). Therefore, for unsupported
flags error changed from EOPNOSUPP to ENOIOCTLCMD.
Link: https://lore.kernel.org/linux-xfs/a622643f-1585-40b0-9441-cf7ece176e83@kernel.org/
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On more places is set DeletePending member to 0. Add comments why is 0 the
correct value. Paths in DELETE_PENDING state cannot be opened by new calls.
So if the newly issued open for that path succeed then it means that the
path cannot be in DELETE_PENDING state.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use SMBSetInformation() as a fallback function (when CIFSSMBSetPathInfo()
fails) which can set attribudes on the directory, including changing
read-only attribute.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On NT systems, it is possible to do SMB open call also for directories.
Open argument CREATE_NOT_DIR disallows opening directories. So in fallback
code path in smb_set_file_info() remove CREATE_NOT_DIR restriction to allow
it also for directories.
Similar fallback is implemented also in CIFSSMBSetPathInfoFB() function and
this function already allows to call operation for directories.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
EA $LXMOD is required for WSL non-symlink reparse points.
Fixes: ef86ab131d91 ("cifs: Fix querying of WSL CHR and BLK reparse points over SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
