| Age | Commit message (Collapse) | Author |
|---|
|
hugetlb_vmdelete_list() uses trylock to acquire VMA locks during truncate
operations. As per the original design in commit 40549ba8f8e0 ("hugetlb:
use new vma_lock for pmd sharing synchronization"), if the trylock fails
or the VMA has no lock, it should skip that VMA. Any remaining mapped
pages are handled by remove_inode_hugepages() which is called after
hugetlb_vmdelete_list() and uses proper lock ordering to guarantee
unmapping success.
Currently, when hugetlb_vma_trylock_write() returns success (1) for VMAs
without shareable locks, the code proceeds to call unmap_hugepage_range().
This causes assertion failures in huge_pmd_unshare() →
hugetlb_vma_assert_locked() because no lock is actually held:
WARNING: CPU: 1 PID: 6594 Comm: syz.0.28 Not tainted
Call Trace:
hugetlb_vma_assert_locked+0x1dd/0x250
huge_pmd_unshare+0x2c8/0x540
__unmap_hugepage_range+0x6e3/0x1aa0
unmap_hugepage_range+0x32e/0x410
hugetlb_vmdelete_list+0x189/0x1f0
Fix by using goto to ensure locks acquired by trylock are always released,
even when skipping VMAs without shareable locks.
Link: https://lkml.kernel.org/r/20250926033255.10930-1-kartikey406@gmail.com
Fixes: 40549ba8f8e0 ("hugetlb: use new vma_lock for pmd sharing synchronization")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f26d7c75c26ec19790e7
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs.
This warning is ultimately caused because the underlying Squashfs file
system returns a file with a negative file size.
This commit checks for a negative file size and returns EINVAL.
[phillip@squashfs.org.uk: only need to check 64 bit quantity]
Link: https://lkml.kernel.org/r/20250926222305.110103-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250926215935.107233-1-phillip@squashfs.org.uk
Fixes: 6545b246a2c8 ("Squashfs: inode operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+f754e01116421e9754b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d580e5.a00a0220.303701.0019.GAE@google.com/
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add support for SEEK_DATA and SEEK_HOLE lseek() whence values.
These allow much faster searches for holes and data in sparse files, which
can significantly speed up file copying, e.g.
before (GNU coreutils, Debian 13):
cp --sparse=always big-file /
took real 11m58s, user 0m5.764s, sys 11m48s
after:
real 0.047s, user 0.000s, sys 0.027s
Where big-file has a 256 GB hole followed by 47 KB of data.
Link: https://lkml.kernel.org/r/20250923220652.568416-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
Link: https://lkml.kernel.org/r/20250923220652.568416-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250923220652.568416-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then
the error handling frees "lc" a second time. Set "lc" to NULL on this
path to avoid a double free.
Link: https://lkml.kernel.org/r/aNKDz_7JF7aycZ0k@stanley.mountain
Fixes: c994c2ebdbbc ("ocfs2: use the new DLM operation callbacks while requesting new lockspace")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 21aa65bf82a7 ("mm: remove callers of pfn_t functionality")
incorrectly replaced the pfn with the physical address when calling
vmf_insert_mixed(). Instead the phys_to_pfn_t() call should have been
replaced with PHYS_PFN().
Found by inspection after a similar issue was noted in fuse virtio_fs.
Link: https://lkml.kernel.org/r/20250923005333.3165032-1-apopple@nvidia.com
Fixes: 21aa65bf82a7 ("mm: remove callers of pfn_t functionality")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Haiyue Wang <haiyuewa@163.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.
This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number. In particular the inode number
is that of a symbolic link, rather than a directory.
Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.
unsigned int parent_ino = squashfs_i(inode)->parent;
Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.
The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.
Regular inodes used to share the parent field with the block_list_start
field. This is removed in this commit to enable the parent field to
contain the invalid inode number 0.
Link: https://lkml.kernel.org/r/20250918233308.293861-1-phillip@squashfs.org.uk
Fixes: 122601408d20 ("Squashfs: export operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+157bdef5cf596ad0da2c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68cc2431.050a0220.139b6.0001.GAE@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 4 are cc:stable and the remainder address post-6.16 issues
or aren't considered necessary for -stable kernels. 6 of these fixes
are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-09-27-22-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
include/linux/pgtable.h: convert arch_enter_lazy_mmu_mode() and friends to static inlines
mm/damon/sysfs: do not ignore callback's return value in damon_sysfs_damon_call()
mailmap: add entry for Bence Csókás
fs/proc/task_mmu: check p->vec_buf for NULL
kmsan: fix out-of-bounds access to shadow memory
mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count
mm/hugetlb: fix folio is still mapped when deleted
|
|
There are very few places that have cause to do that - all in core
VFS now, and all done to files that are not yet opened (or visible
to anybody else, for that matter).
Let's turn f_path into a union of struct path __f_path and const
struct path f_path. It's C, not C++ - 6.5.2.3[4] in C99 and
later explicitly allows that kind of type-punning.
That way any attempts to bypass these checks will be either very
easy to catch, or (if the bastards get sufficiently creative to
make it hard to spot with grep alone) very clearly malicious -
and still catchable with a bit of instrumentation for sparse.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
v9fs_sysfs_init() always returned -ENOMEM on failure;
return the actual sysfs_create_group() error instead.
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-3-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
caches_show() overwrote its buffer on each iteration,
so only the last cache tag was visible in sysfs output.
Properly append with snprintf(buf + count, …).
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-2-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Fix a few minor typos in comments (e.g. "trasnport" → "transport").
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-1-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Updates lseg creation path to parse and add striped layouts. Enable
support for striped layouts.
Limitations:
1. All mirrors must have the same number of stripes.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Updates the layout stats logic to be stripe aware. Read and write
stats are accumulated on a per DS stripe basis. Also updates error
paths to use dss_id where appropraite.
Limitations:
1. The layout stats structure is still statically sized to 4 and there
is no deduplication logic for deviceids that may appear more than once
in a striped layout.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Updates write path to calculate and use dss_id to direct IO to the
appropriate stripe DS.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Updates the commit path to be stripe aware. This required updating
the ds_commit_idx to be stripe aware.
ds_commit_idx == mirror_idx * dss_count + dss_id.
Updates code paths to utilize the new ds_commit_idx and derive dss_id
& mirror_idx where appropriate to contact the correct DS using the
corresponding parameters.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Updates read path to calculate and use dss_id to direct IO to the
appropriate stripe DS.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Updates common helper functions to be dss_id aware. Most cases simply
add a dss_id parameter. The has_available functions have been updated
with a loop.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Adds a new struct nfs4_ff_layout_ds_stripe that represents a data
server stripe within a layout. A new dynamically allocated array of
this type has been added to nfs4_ff_layout_mirror and per stripe
configuration information has been moved from the mirror type to the
stripe based on the RFC.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Correct this path to use ds_commit_idx. Another noop preparation
change. In current code commit_idx == mirror_idx but when striping is
enabled that will not be true.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
No-op preparation change to remove dependency on cred local
variable. Subsequent striping diff has a cred per stripe so this local
variable can't be trusted to be the same.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Pull smb client fixes from Steve French:
- Fix unlink bug
- Fix potential out of bounds access in processing compound requests
* tag 'v6.17rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix wrong index reference in smb2_compound_op()
smb: client: handle unlink(2) of files open by different clients
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Prevent double unlock in netfs
- Fix a NULL pointer dereference in afs_put_server()
- Fix a reference leak in netfs
* tag 'vfs-6.17-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: fix reference leak
afs: Fix potential null pointer dereference in afs_put_server
netfs: Prevent duplicate unlocking
|
|
In smb2_compound_op(), the loop that processes each command's response
uses wrong indices when accessing response bufferes.
This incorrect indexing leads to improper handling of command results.
Also, if incorrectly computed index is greather than or equal to
MAX_COMPOUND, it can cause out-of-bounds accesses.
Fixes: 3681c74d342d ("smb: client: handle lack of EA support in smb2_query_path_info()") # 6.14
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When orphan file feature is enabled, inode can be tracked as orphan
either in the standard orphan list or in the orphan file. The first can
be tested by checking ei->i_orphan list head, the second is recorded by
EXT4_STATE_ORPHAN_FILE inode state flag. There are several places where
we want to check whether inode is tracked as orphan and only some of
them properly check for both possibilities. Luckily the consequences are
mostly minor, the worst that can happen is that we track an inode as
orphan although we don't need to and e2fsck then complains (resulting in
occasional ext4/307 xfstest failures). Fix the problem by introducing a
helper for checking whether an inode is tracked as orphan and use it in
appropriate places.
Fixes: 4a79a98c7b19 ("ext4: Improve scalability of ext4 orphan file handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250925123038.20264-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
During xattr block validation, check_xattrs() processes xattr entries
without validating that entries claiming to use EA inodes have non-zero
sizes. Corrupted filesystems may contain xattr entries where e_value_size
is zero but e_value_inum is non-zero, indicating invalid xattr data.
Add validation in check_xattrs() to detect this corruption pattern early
and return -EFSCORRUPTED, preventing invalid xattr entries from causing
issues throughout the ext4 codebase.
Cc: stable@kernel.org
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+4c9d23743a2409b80293@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=4c9d23743a2409b80293
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250923133245.1091761-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
Reported-by: syzbot+0be4f339a8218d2a5bb1@syzkaller.appspotmail.com
Fixes: https://syzbot.org/bug?extid=0be4f339a8218d2a5bb1
Cc: stable@kernel.org
Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com>
Message-ID: <20250920021342.45575-1-eraykrdg1@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement the EXT4_IOC_GET_TUNE_SB_PARAM and
EXT4_IOC_SET_TUNE_SB_PARAM ioctls, which allow certains superblock
parameters to be set while the file system is mounted, without needing
write access to the block device.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-3-d594dc7486f0@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Support for specifying the default user id and group id that is
allowed to use the reserved block space was added way back when Linux
only supported 16-bit uid's and gid's. (Yeah, that long ago.) It's
not a commonly used feature, but let's add support for 32-bit user and
group id's.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-2-d594dc7486f0@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring.
Cc: stable@vger.kernel.org
Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org
Fixes: a40759fb16ae ("ext4: remove array of buffer_heads from mext_page_mkuptodate()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
Reported-by: syzbot+0b92850d68d9b12934f5@syzkaller.appspotmail.com
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20250909112206.10459-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit bc264fea0f6f ("iomap: support incremental iomap_iter advances")
changed the error handling logic in iomap_iter(). Previously any error
from iomap_dio_bio_iter() got propagated to userspace, after this commit
if ->iomap_end returns error, it gets propagated to userspace instead of
an error from iomap_dio_bio_iter(). This results in unaligned writes to
ext4 to silently fallback to buffered IO instead of erroring out.
Now returning ENOTBLK for DIO writes from ext4_iomap_end() seems
unnecessary these days. It is enough to return ENOTBLK from
ext4_iomap_begin() when we don't support DIO write for that particular
file offset (due to hole).
Fixes: bc264fea0f6f ("iomap: support incremental iomap_iter advances")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Message-ID: <20250901112739.32484-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove superfluous argument from fcntl_{get/set}_rw_hint.
No functional change.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Massage listmount() and make sure we don't call path_put() under the
namespace semaphore. If we put the last reference we're fscked.
Fixes: b4c2bea8ceaa ("add listmount(2) syscall")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Massage statmount() and make sure we don't call path_put() under the
namespace semaphore. If we put the last reference we're fscked.
Fixes: 46eae99ef733 ("add statmount(2) syscall")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 20d72b00ca81 ("netfs: Fix the request's work item to not
require a ref") modified netfs_alloc_request() to initialize the
reference counter to 2 instead of 1. The rationale was that the
requet's "work" would release the second reference after completion
(via netfs_{read,write}_collection_worker()). That works most of the
time if all goes well.
However, it leaks this additional reference if the request is released
before the I/O operation has been submitted: the error code path only
decrements the reference counter once and the work item will never be
queued because there will never be a completion.
This has caused outages of our whole server cluster today because
tasks were blocked in netfs_wait_for_outstanding_io(), leading to
deadlocks in Ceph (another bug that I will address soon in another
patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call
which failed in fscache_begin_write_operation(). The leaked
netfs_io_request was never completed, leaving `netfs_inode.io_count`
with a positive value forever.
All of this is super-fragile code. Finding out which code paths will
lead to an eventual completion and which do not is hard to see:
- Some functions like netfs_create_write_req() allocate a request, but
will never submit any I/O.
- netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read()
and then netfs_put_request(); however, netfs_unbuffered_read() can
also fail early before submitting the I/O request, therefore another
netfs_put_request() call must be added there.
A rule of thumb is that functions that return a `netfs_io_request` do
not submit I/O, and all of their callers must be checked.
For my taste, the whole netfs code needs an overhaul to make reference
counting easier to understand and less fragile & obscure. But to fix
this bug here and now and produce a patch that is adequate for a
stable backport, I tried a minimal approach that quickly frees the
request object upon early failure.
I decided against adding a second netfs_put_request() each time
because that would cause code duplication which obscures the code
further. Instead, I added the function netfs_put_failed_request()
which frees such a failed request synchronously under the assumption
that the reference count is exactly 2 (as initially set by
netfs_alloc_request() and never touched), verified by a
WARN_ON_ONCE(). It then deinitializes the request object (without
going through the "cleanup_work" indirection) and frees the allocation
(with RCU protection to protect against concurrent access by
netfs_requests_seq_start()).
All code paths that fail early have been changed to call
netfs_put_failed_request() instead of netfs_put_request().
Additionally, I have added a netfs_put_request() call to
netfs_unbuffered_read() as explained above because the
netfs_put_failed_request() approach does not work there.
Fixes: 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba84 ("NFS support for btrfs - v3")
CC: stable@vger.kernel.org # 3.0+
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
For example, in the following case:
$ xfs_io -c fsmap -d
0: 254:16 [0..7]: static fs metadata 8
1: 254:16 [8..15]: special 102:1 8
2: 254:16 [16..5127]: special 102:2 5112
3: 254:16 [5128..5255]: special 102:3 128
4: 254:16 [5256..5383]: special 102:4 128
5: 254:16 [5384..70919]: inodes 65536
6: 254:16 [70920..70967]: unknown 48
...
$ xfs_io -c fsmap -d 24 33
0: 254:16 [24..39]: unknown 16 <--- incomplete reporting
$ xfs_io -c fsmap -d 24 33 (With patch)
0: 254:16 [16..5127]: special 102:2 5112
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
$ xfs_io -c fsmap -d
...
6: 254:16 [104..127]: free space 24
7: 254:16 [128..191]: inodes 64
...
$ xfs_io -c fsmap -d 137 150
0: 254:16 [128..191]: inodes 64 <-- full extent returned
[1] https://man7.org/linux/man-pages/man2/ioctl_getfsmap.2.html
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <023f37e35ee280cd9baac0296cbadcbe10995cab.1757058211.git.ojaswin@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches
pagemap_scan_backout_range(), kernel panics with null-ptr-deref:
[ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none)
[ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80
<snip registers, unreliable trace>
[ 44.946828] Call Trace:
[ 44.947030] <TASK>
[ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0
[ 44.952593] walk_pmd_range.isra.0+0x302/0x910
[ 44.954069] walk_pud_range.isra.0+0x419/0x790
[ 44.954427] walk_p4d_range+0x41e/0x620
[ 44.954743] walk_pgd_range+0x31e/0x630
[ 44.955057] __walk_page_range+0x160/0x670
[ 44.956883] walk_page_range_mm+0x408/0x980
[ 44.958677] walk_page_range+0x66/0x90
[ 44.958984] do_pagemap_scan+0x28d/0x9c0
[ 44.961833] do_pagemap_cmd+0x59/0x80
[ 44.962484] __x64_sys_ioctl+0x18d/0x210
[ 44.962804] do_syscall_64+0x5b/0x290
[ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e
vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are
allocated and p->vec_buf remains set to NULL.
This breaks an assumption made later in pagemap_scan_backout_range(), that
page_region is always allocated for p->vec_buf_index.
Fix it by explicitly checking p->vec_buf for NULL before dereferencing.
Other sites that might run into same deref-issue are already (directly or
transitively) protected by checking p->vec_buf.
Note:
From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output
is requested and it's only the side effects caller is interested in,
hence it passes check in pagemap_scan_get_args().
This issue was found by syzkaller.
Link: https://lkml.kernel.org/r/20250922082206.6889-1-acsjakub@amazon.de
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Migration may be raced with fallocating hole. remove_inode_single_folio
will unmap the folio if the folio is still mapped. However, it's called
without folio lock. If the folio is migrated and the mapped pte has been
converted to migration entry, folio_mapped() returns false, and won't
unmap it. Due to extra refcount held by remove_inode_single_folio,
migration fails, restores migration entry to normal pte, and the folio is
mapped again. As a result, we triggered BUG in filemap_unaccount_folio.
The log is as follows:
BUG: Bad page cache in process hugetlb pfn:156c00
page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00
head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0
aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file"
flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f4(hugetlb)
page dumped because: still mapped when deleted
CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x70
filemap_unaccount_folio+0xc4/0x1c0
__filemap_remove_folio+0x38/0x1c0
filemap_remove_folio+0x41/0xd0
remove_inode_hugepages+0x142/0x250
hugetlbfs_fallocate+0x471/0x5a0
vfs_fallocate+0x149/0x380
Hold folio lock before checking if the folio is mapped to avold race with
migration.
Link: https://lkml.kernel.org/r/20250912074139.3575005-1-tujinjiang@huawei.com
Fixes: 4aae8d1c051e ("mm/hugetlbfs: unmap pages if page fault raced with hole punch")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In June 2015, commit c290ea01abb7 ("fs: Remove ext3 filesystem driver")
removed the historic ext3 filesystem support as ext3 partitions are fully
supported with the ext4 filesystem support. To simplify updating the kernel
build configuration, which had only EXT3 support but not EXT4 support
enabled, the three config options EXT3_{FS,FS_POSIX_ACL,FS_SECURITY} were
kept, instead of immediately removing them. The three options just enable
the corresponding EXT4 counterparts when configs from older kernel versions
are used to build on later kernel versions. This ensures that the kernels
from those kernel build configurations would then continue to have EXT4
enabled for supporting booting from ext3 and ext4 file systems, to avoid
potential unexpected surprises.
Given that the kernel build configuration has no backwards-compatibility
guarantee and this transition phase for such build configurations has been
in place for a decade, we can reasonably expect all such users to have
transitioned to use the EXT4 config options in their config files at this
point in time. With that in mind, the three EXT3 config options are
obsolete by now.
Remove the obsolete EXT3 config options.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In commit 6a3afb6ac6df ("jbd2: increase the journal IO's priority"),
the priority of IOs initiated by jbd2 has been raised, exempting them
from WBT throttling.
Checkpoint is also a crucial operation of jbd2. While no serious issues
have been observed so far, it should still be reasonable to exempt
checkpoint from WBT throttling.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called
when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo
slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy()
lacks null pointer checking, this leads to a null pointer dereference.
==================================================================
EXT4-fs: no memory for groupinfo slab cache
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP PTI
CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none)
RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40
Call Trace:
<TASK>
xa_destroy+0x61/0x130
ext4_mb_init+0x483/0x540
__ext4_fill_super+0x116d/0x17b0
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
do_new_mount+0x197/0x300
__x64_sys_mount+0x116/0x150
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy()
to prevent this issue. The same fix is also applied to
ext4_mb_largest_free_orders_destroy().
Reported-by: syzbot+1713b1aa266195b916c2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1713b1aa266195b916c2
Cc: stable@kernel.org
Fixes: f7eaacbb4e54 ("ext4: convert free groups order lists to xarrays")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit
8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The clamp() macro explicitly expresses the intent of constraining a value
within bounds.Therefore, replacing max(min(a,b),c) with clamp(val, lo, hi)
can improve code readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
