| Age | Commit message (Collapse) | Author |
|---|
|
Before we start adding new tracepoints for fuse+iomap, move the
tracepoint creation itself to a separate source file so that we don't
have to start pulling iomap dependencies into dev.c just for the iomap
structures.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
iomap support for fuse is also going to want the ability to attach
backing files to a fuse filesystem. Move the fuse_backing code into a
separate file so that both can use it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When the server is recovering from a reboot and is in a grace period,
any operation that may result in deletion or reallocation of block
extents should not be allowed. See RFC 8881, section 18.43.3.
If multiple clients write data to the same file, rebooting the server
during writing may result in file corruption. In the worst case, the
exported XFS may also become corrupted. Observed this behavior while
testing pNFS block volume setup.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It's misplaced in struct proc_ns_operations and ns->ops might be NULL if
the namespace is compiled out but we still want to know the type of the
namespace for the initial namespace struct.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add support for RENAME_NOREPLACE and RENAME_EXCHANGE, if the server
supports them.
The default is translated to YFS.Rename_Replace, falling back to
YFS.Rename; RENAME_NOREPLACE is translated to YFS.Rename_NoReplace and
RENAME_EXCHANGE to YFS.Rename_Exchange, both of which fall back to
reporting EINVAL.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/740476.1758718189@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Dan Carpenter <dan.carpenter@linaro.org>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
afs_put_server() accessed server->debug_id before the NULL check, which
could lead to a null pointer dereference. Move the debug_id assignment,
ensuring we never dereference a NULL server pointer.
Fixes: 2757a4dc1849 ("afs: Fix access after dec in put functions")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It is already performed in z_erofs_map_blocks_fo().
Also align the error message with that used for the uncompressed
inline layout.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Add support for reading to the erofs volume label from the
FS_IOC_GETFSLABEL ioctls.
Signed-off-by: Bo Liu (OpenAnolis) <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Currently, HFS/HFS+ has very obsolete and inconvenient
debug output subsystem. Also, the code is duplicated
in HFS and HFS+ driver. This patch introduces
linux/hfs_common.h for gathering common declarations,
inline functions, and common short methods. Currently,
this file contains only hfs_dbg() function that
employs pr_debug() with the goal to print a debug-level
messages conditionally.
So, now, it is possible to enable the debug output
by means of:
echo 'file extent.c +p' > /proc/dynamic_debug/control
echo 'func hfsplus_evict_inode +p' > /proc/dynamic_debug/control
And debug output looks like this:
hfs: pid 5831:fs/hfs/catalog.c:228 hfs_cat_delete(): delete_cat: 00,48
hfs: pid 5831:fs/hfs/extent.c:484 hfs_file_truncate(): truncate: 48, 409600 -> 0
hfs: pid 5831:fs/hfs/extent.c:212 hfs_dump_extent():
hfs: pid 5831:fs/hfs/extent.c:214 hfs_dump_extent(): 78:4
hfs: pid 5831:fs/hfs/extent.c:214 hfs_dump_extent(): 0:0
hfs: pid 5831:fs/hfs/extent.c:214 hfs_dump_extent(): 0:0
v4
Debug messages have been reworked and information about
new HFS/HFS+ shared declarations file has been added
to MAINTAINERS file.
v5
Yangtao Li suggested to clean up debug output and
fix several typos.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more regression fix for a problem in zoned mode: mounting would
fail if the number of open and active zones reached a common limit
that didn't use to be checked"
* tag 'for-6.17-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: don't fail mount needlessly due to too many active zones
|
|
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The NFS client needs to defer dropbehind until after any writes to the
folio have been persisted on the server. Since this may be a 2 step
process, use folio_end_writeback_no_dropbehind() to allow release of the
writeback flag, and then call folio_end_dropbehind() once the COMMIT is
done.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Clean up: because svc_rpcb_cleanup() and svc_xprt_destroy_all()
are always invoked in pairs, we can deduplicate code by moving
the svc_rpcb_cleanup() call sites into svc_xprt_destroy_all().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The NFS client's NFSv4.0 callback listeners are created with
SVC_SOCK_ANONYMOUS, therefore svc_setup_socket() does not register
them with the client's rpcbind service.
And, note that nfs_callback_down_net() does not call
svc_rpcb_cleanup() at all when shutting down the callback server.
Even if svc_setup_socket() were to attempt to register or unregister
these sockets, the callback service has vs_hidden set, which shunts
the rpcbind upcalls.
The svc_rpcb_cleanup() error flow was introduced by
commit c946556b8749 ("NFS: move per-net callback thread
initialization to nfs_callback_up_net()"). It doesn't appear in the
code that was relocated by that commit.
Therefore, there is no need to call svc_rpcb_cleanup() when listener
creation fails during callback server start-up.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
When client initialization goes through server trunking discovery, it
schedules the state manager and then sleeps waiting for nfs_client
initialization completion.
The state manager can fail during state recovery, and specifically in
lease establishment as nfs41_init_clientid() will bail out in case of
errors returned from nfs4_proc_create_session(), without ever marking
the client ready. The session creation can fail for a variety of reasons
e.g. during backchannel parameter negotiation, with status -EINVAL.
The error status will propagate all the way to the nfs4_state_manager
but the client status will not be marked, and thus the mount process
will remain blocked waiting.
Fix it by adding -EINVAL error handling to nfs4_state_manager().
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
When the client max_resp_sz is larger than what the server encodes in
its reply, the nfs4_verify_back_channel_attrs() check fails and this
causes nfs4_proc_create_session() to fail, in cases where the client
page size is larger than that of the server and the server does not want
to negotiate upwards.
While this is not a problem with the linux nfs server that will reflect
the proposed value in its reply irrespective of the local page size,
other nfs server implementations may insist on their own max_resp_sz
value, which could be smaller.
Fix this by accepting smaller max_resp_sz values from the server, as
this does not violate the protocol. The server is allowed to decrease
but not increase proposed the size, and as such values smaller than the
client-proposed ones are valid.
Fixes: 43c2e885be25 ("nfs4: fix channel attribute sanity-checks")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
RFC7530 states that clients should be prepared for the return of
NFS4ERR_GRACE errors for non-reclaim lock and I/O requests.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
KERN_CONT hails from a simpler time, when SMP wasn't the norm. These
days, it doesn't quite work right since another printk() can always race
in between the first one and the one being "continued".
Nothing calls dprintk_rcu_cont(), so just remove it. The only caller of
dprintk_cont() is in nfs_commit_release_pages(). Just use a normal
dprintk() there instead, since this is not SMP-safe anyway.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Cleanup tracepoint declarations by replacing commas with
semicolons to better match other tracepoint declarations.
No functional changes introduced.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Show the inode info and requested range.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add tracepoints to nfs_writepage_setup() and nfs_do_writepage().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
New start and done tracepoints for:
nfs_update_folio()
nfs_write_begin()
nfs_write_end()
nfs_try_to_update_request()
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add some tracepoints to the I/O submission codepaths.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Jan Kara reported that the shared ILOCK held across the journal
flush during fdatasync operations slows down O_DSYNC DIO on
unwritten extents significantly. The underlying issue is that
unwritten extent conversion needs the ILOCK exclusive, whilst the
datasync operation after the extent conversion holds it shared.
Hence we cannot be flushing the journal for one IO completion whilst
at the same time doing unwritten extent conversion on another IO
completion on the same inode. This means that IO completions
lock-step, and IO performance is dependent on the journal flush
latency.
Jan demonstrated that reducing the ifdatasync lock hold time can
improve O_DSYNC DIO to unwritten extents performance by 2.5x.
Discussion on that patch found issues with the method, and we
came to the conclusion that separately tracking datasync flush
sequences was the best approach to solving the problem.
The fsync code uses the ILOCK to serialise against concurrent
modifications in the transaction commit phase. In a transaction
commit, there are several disjoint updates to inode log item state
that need to be considered atomically by the fsync code. These
operations are all done under ILOCK_EXCL context:
1. ili_fsync_flags is updated in ->iop_precommit
2. i_pincount is updated in ->iop_pin before it is added to the CIL
3. ili_commit_seq is updated in ->iop_committing, after it has been
added to the CIL
In fsync, we need to:
1. check that the inode is dirty in the journal (ipincount)
2. check that ili_fsync_flags is set
3. grab the ili_commit_seq if a journal flush is needed
4. clear the ili_fsync_flags to ensure that new modifications that
require fsync are tracked in ->iop_precommit correctly
The serialisation of ipincount/ili_commit_seq is needed
to ensure that we don't try to unnecessarily flush the journal.
The serialisation of ili_fsync_flags being set in
->iop_precommit and cleared in fsync post journal flush is
required for correctness.
Hence holding the ILOCK_SHARED in xfs_file_fsync() performs all this
serialisation for us. Ideally, we want to remove the need to hold
the ILOCK_SHARED in xfs_file_fsync() for best performance.
We start with the observation that fsync/fdatasync() only need to
wait for operations that have been completed. Hence operations that
are still being committed have not completed and datasync operations
do not need to wait for them.
This means we can use a single point in time in the commit process
to signal "this modification is complete". This is what
->iop_committing is supposed to provide - it is the point at which
the object is unlocked after the modification has been recorded in
the CIL. Hence we could use ili_commit_seq to determine if we should
flush the journal.
In theory, we can already do this. However, in practice this will
expose an internal global CIL lock to the IO path. The ipincount()
checks optimise away the need to take this lock - if the inode is
not pinned, then it is not in the CIL and we don't need to check if
a journal flush at ili_commit_seq needs to be performed.
The reason this is needed is that the ili_commit_seq is never
cleared. Once it is set, it remains set even once the journal has
been committed and the object has been unpinned. Hence we have to
look that journal internal commit sequence state to determine if
ili_commit_seq needs to be acted on or not.
We can solve this by clearing ili_commit_seq when the inode is
unpinned. If we clear it atomically with the last unpin going away,
then we are guaranteed that new modifications will order correctly
as they add a new pin counts and we won't clear a sequence number
for an active modification in the CIL.
Further, we can then allow the per-transaction flag state to
propagate into ->iop_committing (instead of clearing it in
->iop_precommit) and that will allow us to determine if the
modification needs a full fsync or just a datasync, and so we can
record a separate datasync sequence number (Jan's idea!) and then
use that in the fdatasync path instead of the full fsync sequence
number.
With this infrastructure in place, we no longer need the
ILOCK_SHARED in the fsync path. All serialisation is done against
the commit sequence numbers - if the sequence number is set, then we
have to flush the journal. If it is not set, then we have nothing to
do. This greatly simplifies the fsync implementation....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There are similar extsize checks and updates done inside and outside
the inode item lock, which could all be done under a single top
level logic branch outside the ili_lock. The COW extsize fixup can
potentially miss updating the XFS_ILOG_CORE in ili_fsync_fields, so
moving this code up above the ili_fsync_fields update could also be
considered a fix.
Further, to make the next change a bit cleaner, move where we
calculate the on-disk flag mask to after we attach the cluster
buffer to the the inode log item.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Turn on syncfs for all fuseblk servers so that the ones in the know can
flush cached intermediate data and logs to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
start_creating() is a generic name which I would like to use for a
function similar to simple_start_creating(), only not quite so simple.
debugfs is using this name which, though static, will cause complaints
if then name is given a different signature in a header file.
So rename it to debugfs_start_creating().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kern_path_locked() is now only used to prepare for removing an object
from the filesystem (and that is the only credible reason for wanting a
positive locked dentry). Thus it corresponds to kern_path_create() and
so should have a corresponding name.
Unfortunately the name "kern_path_create" is somewhat misleading as it
doesn't actually create anything. The recently added
simple_start_creating() provides a better pattern I believe. The
"start" can be matched with "end" to bracket the creating or removing.
So this patch changes names:
kern_path_locked -> start_removing_path
kern_path_create -> start_creating_path
user_path_create -> start_creating_user_path
user_path_locked_at -> start_removing_user_path_at
done_path_create -> end_creating_path
and also introduces end_removing_path() which is identical to
end_creating_path().
__start_removing_path (which was __kern_path_locked) is enhanced to
call mnt_want_write() for consistency with the start_creating_path().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
audit_alloc_mark() and audit_get_nd() both need to perform a path
lookup getting the parent dentry (which must exist) and the final
target (following a LAST_NORM name) which sometimes doesn't need to
exist.
They don't need the parent to be locked, but use kern_path_locked() or
kern_path_locked_negative() anyway. This is somewhat misleading to the
casual reader.
This patch introduces a more targeted function, kern_path_parent(),
which returns not holding locks. On success the "path" will
be set to the parent, which must be found, and the return value is the
dentry of the target, which might be negative.
This will clear the way to rename kern_path_locked() which is
otherwise only used to prepare for removing something.
It also allows us to remove kern_path_locked_negative(), which is
transformed into the new kern_path_parent().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A rename operation can only rename within a single mount. Callers of
vfs_rename() must and do ensure this is the case.
So there is no point in having two mnt_idmaps in renamedata as they are
always the same. Only one of them is passed to ->rename in any case.
This patch replaces both with a single "mnt_idmap" and changes all
callers.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since 204a575e91f3 "VFS: add common error checks to lookup_one_qstr_excl()"
filename_create() does not need to stash the error value from mnt_want_write()
into a separate variable - the logic that used to clobber 'error' after the
call of mnt_want_write() has migrated into lookup_one_qstr_excl().
So there is no need for two different err variables.
This patch discards "err2" and uses "error' throughout.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ovl wants a lookup which won't block on a fatal signal. It currently
uses down_write_killable() and then repeatedly calls to lookup_one()
The lock may not be needed if the name is already in the dcache and it
aids proposed future changes if the locking is kept internal to namei.c
So this patch adds lookup_one_positive_killable() which is like
lookup_one_positive() but will abort in the face of a fatal signal.
overlayfs is changed to use this.
Note that instead of always getting an exclusive lock, ovl now only gets
a shared lock, and only sometimes. The exclusive lock was never needed.
However down_read_killable() was only added in v4.15 but overlayfs started
using down_write_killable() here in v4.7.
Note that the linked list ->first_maybe_whiteout ->next_maybe_white is
local to the thread so there is no concurrency in that list which could
be threatened by removing the locking.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
e8bd877fb76bb9f3 ("ovl: fix possible double unlink") added a sanity
check of !d_unhashed(child) to try to verify that child dentry was not
unlinked while parent dir was unlocked.
This "was not unlink" check has a false positive result in the case of
casefolded parent dir, because in that case, ovl_create_temp() returns
an unhashed dentry after ovl_create_real() gets an unhashed dentry from
ovl_lookup_upper() and makes it positive.
To avoid returning unhashed dentry from ovl_create_temp(), let
ovl_create_real() lookup again after making the newdentry positive,
so it always returns a hashed positive dentry (or an error).
This fixes the error in ovl_parent_lock() in ovl_check_rename_whiteout()
after ovl_create_temp() and allows mount of overlayfs with casefolding
enabled layers.
Reported-by: André Almeida <andrealmeid@igalia.com>
Closes: https://lore.kernel.org/r/18704e8c-c734-43f3-bc7c-b8be345e1bf5@igalia.com/
Suggested-by: Neil Brown <neil@brown.name>
Reviewed-by: Neil Brown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Drop the restriction for casefold dentries lookup to enable support for
case-insensitive layers in overlayfs.
Support case-insensitive layers with the condition that they should be
uniformly enabled across the stack and (i.e. if the root mount dir has
casefold enabled, so should all the dirs bellow for every layer).
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
In a overlayfs with casefold enabled, all new dentries should have
casefold enabled as well. Check this at ovl_create_real().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
To keep ovl's inodes consistent with their real inodes, create a new
mask for inode file attributes that needs to be copied. Add the
S_CASEFOLD flag as part of the flags that need to be copied along with
the other file attributes.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
For filesystems with encoding (i.e. with case-insensitive support), set
the dentry operations for the super block as ovl_dentry_ci_operations.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
When merging layers from different filesystems with casefold enabled,
all layers should use the same encoding version and have the same flags
to avoid any kind of incompatibility issues.
Also, set the encoding and the encoding flags for the ovl super block as
the same as used by the first valid layer.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
To add overlayfs support casefold layers, create a new function
ovl_casefold(), to be able to do case-insensitive strncmp().
ovl_casefold() allocates a new buffer and stores the casefolded version
of the string on it. If the allocation or the casefold operation fails,
fallback to use the original string.
The case-insentive name is then used in the rb-tree search/insertion
operation. If the name is found in the rb-tree, the name can be
discarded and the buffer is freed. If the name isn't found, it's then
stored at struct ovl_cache_entry to be used later.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Prepare for mounting layers with case-insensitive dentries in order to
supporting such layers in overlayfs, while enforcing uniform casefold
layers.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The fuse_request_{send,end} tracepoints capture the value of
req->in.h.unique in the trace output. It would be really nice if we
could use this to match a request to its response for debugging and
latency analysis, but the call to trace_fuse_request_send occurs before
the unique id has been set:
fuse_request_send: connection 8388608 req 0 opcode 1 (FUSE_LOOKUP) len 107
fuse_request_end: connection 8388608 req 6 len 16 error -2
(Notice that req moves from 0 to 6)
Move the callsites to trace_fuse_request_send to after the unique id has
been set by introducing a helper to do that for standard fuse_req
requests. FUSE_FORGET requests are not covered by this because they
appear to be synthesized into the event stream without a fuse_req
object and are never replied to.
Requests that are aborted without ever having been submitted to the fuse
server retain the behavior that only the fuse_request_end tracepoint
shows up in the trace record, and with req==0.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
I observed a hang when running generic/323 against a fuseblk server.
This test opens a file, initiates a lot of AIO writes to that file
descriptor, and closes the file descriptor before the writes complete.
Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for
responses from the fuseblk server:
# cat /proc/372265/task/372313/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_do_getattr+0xfc/0x1f0 [fuse]
[<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse]
[<0>] aio_read+0x130/0x1e0
[<0>] io_submit_one+0x542/0x860
[<0>] __x64_sys_io_submit+0x98/0x1a0
[<0>] do_syscall_64+0x37/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
But the /weird/ part is that the fuseblk server threads are waiting for
responses from itself:
# cat /proc/372210/task/372232/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_file_put+0x9a/0xd0 [fuse]
[<0>] fuse_release+0x36/0x50 [fuse]
[<0>] __fput+0xec/0x2b0
[<0>] task_work_run+0x55/0x90
[<0>] syscall_exit_to_user_mode+0xe9/0x100
[<0>] do_syscall_64+0x43/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
The fuseblk server is fuse2fs so there's nothing all that exciting in
the server itself. So why is the fuse server calling fuse_file_put?
The commit message for the fstest sheds some light on that:
"By closing the file descriptor before calling io_destroy, you pretty
much guarantee that the last put on the ioctx will be done in interrupt
context (during I/O completion).
Aha. AIO fgets a new struct file from the fd when it queues the ioctx.
The completion of the FUSE_WRITE command from userspace causes the fuse
server to call the AIO completion function. The completion puts the
struct file, queuing a delayed fput to the fuse server task. When the
fuse server task returns to userspace, it has to run the delayed fput,
which in the case of a fuseblk server, it does synchronously.
Sending the FUSE_RELEASE command sychronously from fuse server threads
is a bad idea because a client program can initiate enough simultaneous
AIOs such that all the fuse server threads end up in delayed_fput, and
now there aren't any threads left to handle the queued fuse commands.
Fix this by only using asynchronous fputs when closing files, and leave
a comment explaining why.
Cc: stable@vger.kernel.org # v2.6.38
Fixes: 5a18ec176c934c ("fuse: fix hang of single threaded fuseblk filesystem")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Previously BTRFS did not look at a device's reported max_open_zones limit,
but starting with commit 04147d8394e8 ("btrfs: zoned: limit active zones
to max_open_zones"), zoned BTRFS limited the number of concurrently used
block-groups to the number of max_open_zones a device reported, if it
hadn't already reported a number of max_active_zones.
Starting with commit 04147d8394e8 the number of open zones is treated the
same way as active zones. But this leads to mount failures on filesystems
which have been used before 04147d8394e8 because too many zones are in an
open state.
Ignore the new limitations on these filesystems, so zones can be finished
or evacuated.
Reported-by: Yuwei Han <hrx@bupt.moe>
Link: https://lore.kernel.org/all/2F48A90AF7DDF380+1790bcfd-cb6f-456b-870d-7982f21b5eae@bupt.moe/
Fixes: 04147d8394e8 ("btrfs: zoned: limit active zones to max_open_zones")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
