| Age | Commit message (Collapse) | Author |
|---|
|
Don't clear the capabilities that are not going to get reset by the call
to _nfs4_server_capabilities().
Reported-by: Scott Haiden <scott.b.haiden@gmail.com>
Fixes: b01f21cacde9 ("NFS: Fix the setting of capabilities when automounting a new filesystem")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Assorted fixes for the OP-TEE based pseudo-EFI variable store
- Fix for an OOB access when looking up the same non-existing efivarfs
entry multiple times in parallel
* tag 'efi-fixes-for-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
efi: stmm: Drop unneeded null pointer check
efi: stmm: Drop unused EFI error from setup_mm_hdr arguments
efi: stmm: Do not return EFI_OUT_OF_RESOURCES on internal errors
efi: stmm: Fix incorrect buffer allocation method
|
|
Pull smb client fixes from Steve French:
- Fix possible refcount leak in compound operations
- Fix remap_file_range() return code mapping, found by generic/157
* tag 'v6.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
fs/smb: Fix inconsistent refcnt update
smb3 client: fix return code mapping of remap_file_range
|
|
Pull xfs fixes from Carlos Maiolino:
"The highlight I'd like to point here is related to the XFS_RT
Kconfig, which has been updated to be enabled by default now if
CONFIG_BLK_DEV_ZONED is enabled.
This also contains a few fixes for zoned devices support in XFS,
specially related to swapon requests in inodes belonging to the zoned
FS.
A null-ptr dereference fix in the xattr data, due to a mishandling of
medium errors generated by block devices is also included"
* tag 'xfs-fixes-6.17-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: do not propagate ENODATA disk errors into xattr code
xfs: reject swapon for inodes on a zoned file system earlier
xfs: kick off inodegc when failing to reserve zoned blocks
xfs: remove xfs_last_used_zone
xfs: Default XFS_RT to Y if CONFIG_BLK_DEV_ZONED is enabled
|
|
For a user mode library to avoid generating SIGPIPE signals (e.g.
because this behaviour is not portable across operating systems) is
cumbersome. It is generally bad form to change the process-wide signal
mask in a library, so a local solution is needed instead.
For I/O performed directly using system calls (synchronous or readiness
based asynchronous) this currently involves applying a thread-specific
signal mask before the operation and reverting it afterwards. This can be
avoided when it is known that the file descriptor refers to neither a
pipe nor a socket, but a conservative implementation must always apply
the mask. This incurs the cost of two additional system calls. In the
case of sockets, the existing MSG_NOSIGNAL flag can be used with send.
For asynchronous I/O performed using io_uring, currently the only option
(apart from MSG_NOSIGNAL for sockets), is to mask SIGPIPE entirely in the
call to io_uring_enter. Thankfully io_uring_enter takes a signal mask, so
only a single syscall is needed. However, copying the signal mask on
every call incurs a non-zero performance penalty. Furthermore, this mask
applies to all completions, meaning that if the non-signaling behaviour
is desired only for some subset of operations, the desired signals must
be raised manually from user-mode depending on the completed operation.
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE signal
from being raised when writing on disconnected pipes or sockets. The flag
is handled directly by the pipe filesystem and converted to the existing
MSG_NOSIGNAL flag for sockets.
Signed-off-by: Lauri Vasama <git@vasama.org>
Link: https://lore.kernel.org/20250827133901.1820771-1-git@vasama.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When dealing with structures containing flexible arrays, struct_size()
provides additional compile-time checks compared to offsetof(). This
enhances code robustness and reduces the risk of potential errors.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/20250829091510.597858-1-zhao.xichao@vivo.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 620c266f39493 ("fhandle: relax open_by_handle_at() permission
checks") relaxed the coditions for decoding a file handle from non init
userns.
The conditions are that that decoded dentry is accessible from the user
provided mountfd (or to fs root) and that all the ancestors along the
path have a valid id mapping in the userns.
These conditions are intentionally more strict than the condition that
the decoded dentry should be "lookable" by path from the mountfd.
For example, the path /home/amir/dir/subdir is lookable by path from
unpriv userns of user amir, because /home perms is 755, but the owner of
/home does not have a valid id mapping in unpriv userns of user amir.
The current code did not check that the decoded dentry itself has a
valid id mapping in the userns. There is no security risk in that,
because that final open still performs the needed permission checks,
but this is inconsistent with the checks performed on the ancestors,
so the behavior can be a bit confusing.
Add the check for the decoded dentry itself, so that the entire path,
including the last component has a valid id mapping in the userns.
Fixes: 620c266f39493 ("fhandle: relax open_by_handle_at() permission checks")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250827194309.1259650-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the direct I/O alignment reporting from ->getattr instead of
reimplementing it. This exposes the relaxation of the memory
alignment in the XFS_IOC_DIOINFO info and ensure the information will
stay in sync. Note that randholes.c in xfstests has a bug where it
incorrectly fails when the required memory alignment is smaller than the
pointer size. Round up the reported value as there is a fair chance that
this code got copied into various applications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
XFS does't have file attributes manipulation ioctls for special
files. Changing or reading file attributes is rejected for them in
xfs_fileattr_*et().
In XFS, this is necessary to work for project quota directories.
When project is set up, xfs_quota opens and calls FS_IOC_SETFSXATTR on
every inode in the directory. However, special files are skipped due to
open() returning a special inode for them. So, they don't even get to
this check.
The recently added file_getattr/file_setattr will call xfs_fileattr_*et,
on special files. This patch allows reading/changing file attributes on
special files.
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
As there are now file_getattr() and file_setattr(), xfs_quota will
call them on special files. These new syscalls call ->fileattr_get/set.
Symlink inodes don't have callbacks to set file attributes. This
patch adds them. The attribute values combinations are checked in
fileattr_set_prepare().
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Special file inodes cannot have project ID set from userspace and
are skipped during initial project setup. Those inodes are left
project-less in the project directory. New inodes created after
project initialization do have an ID. Creating hard links or
renaming those project-less inodes then fails on different ID check.
In commit e23d7e82b707 ("xfs: allow cross-linking special files
without project quota"), we relaxed the project id checks to
allow hardlinking special files with differing project ids since the
projid cannot be changed. Apply the same workaround for renaming
operations.
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
To avoid potential UAF issues during module removal races, we use
pde_set_flags() to save proc_ops flags in PDE itself before
proc_register(), and then use pde_has_proc_*() helpers instead of directly
dereferencing pde->proc_ops->*.
However, the pde_set_flags() call was missing when creating net related
proc files. This omission caused incorrect behavior which FMODE_LSEEK was
being cleared inappropriately in proc_reg_open() for net proc files. Lars
reported it in this link[1].
Fix this by ensuring pde_set_flags() is called when register proc entry,
and add NULL check for proc_ops in pde_set_flags().
[wangzijie1@honor.com: stash pde->proc_ops in a local const variable, per Christian]
Link: https://lkml.kernel.org/r/20250821105806.1453833-1-wangzijie1@honor.com
Link: https://lkml.kernel.org/r/20250818123102.959595-1-wangzijie1@honor.com
Link: https://lore.kernel.org/all/20250815195616.64497967@chagall.paradoxon.rec/ [1]
Fixes: ff7ec8dc1b64 ("proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reported-by: Lars Wendler <polynomial-c@gmx.de>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Petr Vaněk <pv@excello.cz>
Tested by: Lars Wendler <polynomial-c@gmx.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: wangzijie <wangzijie1@honor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already
been executed in ocfs2_dismount_volume(), so osb->journal must be NULL.
Therefore, the following calltrace will inevitably fail when it reaches
jbd2_journal_release_jbd_inode().
ocfs2_dismount_volume()->
ocfs2_delete_osb()->
ocfs2_free_slot_info()->
__ocfs2_free_slot_info()->
evict()->
ocfs2_evict_inode()->
ocfs2_clear_inode()->
jbd2_journal_release_jbd_inode(osb->journal->j_journal,
Adding osb->journal checks will prevent null-ptr-deref during the above
execution path.
Link: https://lkml.kernel.org/r/tencent_357489BEAEE4AED74CBD67D246DBD2C4C606@qq.com
Fixes: da5e7c87827e ("ocfs2: cleanup journal init and shutdown")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47d8cb2f2cc1517e515a
Tested-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current algorithm sanity checks do not properly apply to new
encoded extents.
Unify the algorithm check with Z_EROFS_COMPRESSION(_RUNTIME)_MAX
and ensure consistency with sbi->available_compr_algs.
Reported-and-tested-by: syzbot+5a398eb460ddaa6f242f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68a8bd20.050a0220.37038e.005a.GAE@google.com
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Thanks-to: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
As syzbot reported below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/file.c:1243!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5354 Comm: syz.0.0 Not tainted 6.17.0-rc1-syzkaller-00211-g90d970cade8e #0 PREEMPT(full)
RIP: 0010:f2fs_truncate_hole+0x69e/0x6c0 fs/f2fs/file.c:1243
Call Trace:
<TASK>
f2fs_punch_hole+0x2db/0x330 fs/f2fs/file.c:1306
f2fs_fallocate+0x546/0x990 fs/f2fs/file.c:2018
vfs_fallocate+0x666/0x7e0 fs/open.c:342
ksys_fallocate fs/open.c:366 [inline]
__do_sys_fallocate fs/open.c:371 [inline]
__se_sys_fallocate fs/open.c:369 [inline]
__x64_sys_fallocate+0xc0/0x110 fs/open.c:369
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1e65f8ebe9
w/ a fuzzed image, f2fs may encounter panic due to it detects inconsistent
truncation range in direct node in f2fs_truncate_hole().
The root cause is: a non-inode dnode may has the same footer.ino and
footer.nid, so the dnode will be parsed as an inode, then ADDRS_PER_PAGE()
may return wrong blkaddr count which may be 923 typically, by chance,
dn.ofs_in_node is equal to 923, then count can be calculated to 0 in below
statement, later it will trigger panic w/ f2fs_bug_on(, count == 0 || ...).
count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
This patch introduces a new node_type NODE_TYPE_NON_INODE, then allowing
passing the new_type to sanity_check_node_footer in f2fs_get_node_folio()
to detect corruption that a non-inode dnode has the same footer.ino and
footer.nid.
Scripts to reproduce:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs
touch /mnt/f2fs/foo
touch /mnt/f2fs/bar
dd if=/dev/zero of=/mnt/f2fs/foo bs=1M count=8
umount /mnt/f2fs
inject.f2fs --node --mb i_nid --nid 4 --idx 0 --val 5 /dev/vdb
mount /dev/vdb /mnt/f2fs
xfs_io /mnt/f2fs/foo -c "fpunch 6984k 4k"
Cc: stable@kernel.org
Reported-by: syzbot+b9c7ffd609c3f09416ab@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68a68e27.050a0220.1a3988.0002.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
A possible inconsistent update of refcount was identified in `smb2_compound_op`.
Such inconsistent update could lead to possible resource leaks.
Why it is a possible bug:
1. In the comment section of the function, it clearly states that the
reference to `cfile` should be dropped after calling this function.
2. Every control flow path would check and drop the reference to
`cfile`, except the patched one.
3. Existing callers would not handle refcount update of `cfile` if
-ENOMEM is returned.
To fix the bug, an extra goto label "out" is added, to make sure that the
cleanup logic would always be respected. As the problem is caused by the
allocation failure of `vars`, the cleanup logic between label "finished"
and "out" can be safely ignored. According to the definition of function
`is_replayable_error`, the error code of "-ENOMEM" is not recoverable.
Therefore, the replay logic also gets ignored.
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is slightly tricky, since the VFS uses non-zeroing allocation to
preserve some fields that are left in a consistent state.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The 'inode' parameter in fuse_passthrough_open() is never referenced
in the function implementation.
Signed-off-by: Chunsheng Luo <luochunsheng@ustc.edu>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
syz reported a slab-out-of-bounds Write in fuse_dev_do_write.
When the number of bytes to be retrieved is truncated to the upper limit
by fc->max_pages and there is an offset, the oob is triggered.
Add a loop termination condition to prevent overruns.
Fixes: 3568a9569326 ("fuse: support large folios for retrieves")
Reported-by: syzbot+2d215d165f9354b9c4ea@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2d215d165f9354b9c4ea
Tested-by: syzbot+2d215d165f9354b9c4ea@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The original commit be2ff42c5d6e ("fuse: Use hash table to link
processing request") converted fuse_pqueue->processing to a hash table,
but virtio_fs_enqueue_req() was not updated to use it correctly.
So use fuse_pqueue->processing as a hash table, this make the code
more coherent
Co-developed-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
commit 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal
rb tree") removed temp folios for dirty page writeback. Consequently,
fuse can now use the default writeback accounting.
With switching fuse to use default writeback accounting, there are some
added benefits. This updates wb->writeback_inodes tracking as well now
and updates writeback throughput estimates after writeback completion.
This commit also removes inc_wb_stat() and dec_wb_stat(). These have no
callers anymore now that fuse does not call them.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Since clear_bit is an atomic operation, the spinlock is redundant and
can be removed, reducing lock contention is good for performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
With the change in aee03ea7ff98 ("fuse: support large folios for
writethrough writes"), this old line for setting ap->descs[0].offset is
now obsolete and unneeded. This should have been removed as part of
aee03ea7ff98.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: aee03ea7ff98 ("fuse: support large folios for writethrough writes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use freezable wait in fuse_get_req() so that it won't block
the system from entering suspend:
Freezing user space processes failed after 20.009 seconds
Call trace:
__switch_to+0xcc/0x168
schedule+0x57c/0x1138
fuse_get_req+0xd0/0x2b0
fuse_simple_request+0x120/0x620
fuse_getxattr+0xe4/0x158
fuse_xattr_get+0x2c/0x48
__vfs_getxattr+0x160/0x1d8
get_vfs_caps_from_disk+0x74/0x1a8
__audit_inode+0x244/0x4d8
user_path_at_empty+0x2e0/0x390
__arm64_sys_faccessat+0xdc/0x260
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies and there's no reason why copies
should be limited to 32-bit.
Introduce a new op COPY_FILE_RANGE_64, which is identical, except the
number of bytes copied is returned in a 64-bit value.
If the fuse server does not support COPY_FILE_RANGE_64, fall back to
COPY_FILE_RANGE.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Instead of accessing ->i_count directly in these file systems, use the
appropriate __iget and iput helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/b8e6eb8a3e690ce082828d3580415bf70dfa93aa.1755806649.git.josef@toxicpanda.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT which means
any iomap partial writes will mark the entire folio as uptodate. However
fuseblk filesystems work differently and allow the blocksize to be less
than the page size. As such, this may lead to data corruption if fuseblk
sets its blocksize to less than the page size, uses the writeback cache,
and does a partial write, then a read and the read happens before the
write has undergone writeback, since the folio will not be marked
uptodate from the partial write so the read will read in the entire
folio from disk, which will overwrite the partial write.
The long-term solution for this, which will also be needed for fuse to
enable large folios with the writeback cache on, is to have fuse also
use iomap for folio reads, but until that is done, the cleanest
workaround is to use the page size for fuseblk's internal kernel inode
blksize/blkbits values while maintaining current behavior for stat().
This was verified using ntfs-3g:
$ sudo mkfs.ntfs -f -c 512 /dev/vdd1
$ sudo ntfs-3g /dev/vdd1 ~/fuseblk
$ stat ~/fuseblk/hi.txt
IO Block: 512
Fixes: a4c9ab1d4975 ("fuse: use iomap for buffered writes")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
As pointed out by Miklos[1], in the fuse_update_get_attr() path, the
attributes returned to stat may be cached values instead of fresh ones
fetched from the server. In the case where the server returned a
modified blocksize value, we need to cache it and reflect it back to
stat if values are not re-fetched since we now no longer directly change
inode->i_blkbits.
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguCOxeVX88_zPd1hqziB_C+tmfuDhZP5qO2nKmnb-dTUA@mail.gmail.com/ [1]
Fixes: 542ede096e48 ("fuse: keep inode->i_blkbits constant")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Just like write(), copy_file_range() should check if the return value is
less or equal to the requested number of bytes.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/
Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We do not support passthrough operations other than read/write on
regular file, so allowing non-regular backing files makes no sense.
Fixes: efad7153bf93 ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines")
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When dealing with structures containing flexible arrays, struct_size()
provides additional compile-time checks compared to offsetof(). This
enhances code robustness and reduces the risk of potential errors.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250813115058.635742-1-zhao.xichao@vivo.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In the setup_arg_pages(), ret is declared as an unsigned long.
The ret might take a negative value. Therefore, its type should
be changed to int.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250825073609.219855-1-zhao.xichao@vivo.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
We were returning -EOPNOTSUPP for various remap_file_range cases
but for some of these the copy_file_range_syscall() requires -EINVAL
to be returned (e.g. where source and target file ranges overlap when
source and target are the same file). This fixes xfstest generic/157
which was expecting EINVAL for that (and also e.g. for when the src
offset is beyond end of file).
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use !try_cmpxchg() instead of cmpxchg(*ptr, old, new) != old.
The x86 CMPXCHG instruction returns success in the ZF flag,
so this change saves a compare after CMPXCHG.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/20250811132326.620521-1-ubizjak@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use try_cmpxchg() instead of cmpxchg(*ptr, old, new) == old.
The x86 CMPXCHG instruction returns success in the ZF flag,
so this change saves a compare after CMPXCHG (and related
move instruction in front of CMPXCHG).
Note that the value from *ptr should be read using READ_ONCE() to
prevent the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/20250811125308.616717-1-ubizjak@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need the driver core and rust fixes in here as well to build on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
|
|
This was a useful debugging / validation aid, and can explain why a
GETATTR request is made.
Signed-off-by: Tingmao Wang <m@maowtm.org>
Message-ID: <00829a99549e33d26139fa4d756c466629f13e00.1743956147.git.m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This is an extension of the last commit to cached mode as well. While
server-side changes when using cached mode is not expected, when it does
happen we can get things like -EOPNOTSUPP. With this change at least when
we realize the inode has updated (for example after a `touch` on the
client), we can get a new one.
Signed-off-by: Tingmao Wang <m@maowtm.org>
Message-ID: <01afd3c77d5cda181780dc931baa8f3fc54562c8.1743956147.git.m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Currently if another process keeps a file open, due to existing dentry in
the dcache, other processes will not see updated metadata of that file if
it is changed on the server, even in uncached mode.
This can also manifest as -ENODATA when reading a file that has shrunk on
the server (even if it's re-opened in another process), or -ENOTSUPP if
the file has changed type (e.g. regular file to directory) on the server.
We can end up in a situation where both `readdir` or `read` fails until
the file is closed by all processes using it.
This commit fixes that, and invalidates the dentry altogether if the inode
type is changed (for uncached mode).
Signed-off-by: Tingmao Wang <m@maowtm.org>
Message-ID: <bfac417f65cc1d6812be822f8913f0d4ba0c1052.1743956147.git.m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Pull smb client fix from Steve French:
"Fix for netfs smb3 oops"
* tag '6.17-rc2-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix oops due to uninitialised variable
|
|
Pull NFS client fix from Trond Myklebust:
- NFS: Fix a data corrupting race when updating an existing write
* tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race when updating an existing write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
|
|
At inode_logged() we do a couple lockless checks for ->logged_trans, and
these are generally safe except the second one in case we get a load or
store tearing due to a concurrent call updating ->logged_trans (either at
btrfs_log_inode() or later at inode_logged()).
In the first case it's safe to compare to the current transaction ID since
once ->logged_trans is set the current transaction, we never set it to a
lower value.
In the second case, where we check if it's greater than zero, we are prone
to load/store tearing races, since we can have a concurrent task updating
to the current transaction ID with store tearing for example, instead of
updating with a single 64 bits write, to update with two 32 bits writes or
four 16 bits writes. In that case the reading side at inode_logged() could
see a positive value that does not match the current transaction and then
return a false negative.
Fix this by doing the second check while holding the inode's spinlock, add
some comments about it too. Also add the data_race() annotation to the
first check to avoid any reports from KCSAN (or similar tools) and comment
about it.
Fixes: 0f8ce49821de ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At inode_logged() if we find that the inode was not logged before we
update its ->last_dir_index_offset to (u64)-1 with the goal that the
next directory log operation will see the (u64)-1 and then figure out
it must check what was the index of the last logged dir index key and
update ->last_dir_index_offset to that key's offset (this is done in
update_last_dir_index_offset()).
This however has a possibility for a time window where a race can happen
and lead to directory logging skipping dir index keys that should be
logged. The race happens like this:
1) Task A calls inode_logged(), sees ->logged_trans as 0 and then checks
that the inode item was logged before, but before it sets the inode's
->last_dir_index_offset to (u64)-1...
2) Task B is at btrfs_log_inode() which calls inode_logged() early, and
that has set ->last_dir_index_offset to (u64)-1;
3) Task B then enters log_directory_changes() which calls
update_last_dir_index_offset(). There it sees ->last_dir_index_offset
is (u64)-1 and that the inode was logged before (ctx->logged_before is
true), and so it searches for the last logged dir index key in the log
tree and it finds that it has an offset (index) value of N, so it sets
->last_dir_index_offset to N, so that we can skip index keys that are
less than or equal to N (later at process_dir_items_leaf());
4) Task A now sets ->last_dir_index_offset to (u64)-1, undoing the update
that task B just did;
5) Task B will now skip every index key when it enters
process_dir_items_leaf(), since ->last_dir_index_offset is (u64)-1.
Fix this by making inode_logged() not touch ->last_dir_index_offset and
initializing it to 0 when an inode is loaded (at btrfs_alloc_inode()) and
then having update_last_dir_index_offset() treat a value of 0 as meaning
we must check the log tree and update with the index of the last logged
index key. This is fine since the minimum possible value for
->last_dir_index_offset is 1 (BTRFS_DIR_START_INDEX - 1 = 2 - 1 = 1).
This also simplifies the management of ->last_dir_index_offset and now
all accesses to it are done under the inode's log_mutex.
Fixes: 0f8ce49821de ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's a race between checking if an inode was logged before and logging
an inode that can cause us to mark an inode as not logged just after it
was logged by a concurrent task:
1) We have inode X which was not logged before neither in the current
transaction not in past transaction since the inode was loaded into
memory, so it's ->logged_trans value is 0;
2) We are at transaction N;
3) Task A calls inode_logged() against inode X, sees that ->logged_trans
is 0 and there is a log tree and so it proceeds to search in the log
tree for an inode item for inode X. It doesn't see any, but before
it sets ->logged_trans to N - 1...
3) Task B calls btrfs_log_inode() against inode X, logs the inode and
sets ->logged_trans to N;
4) Task A now sets ->logged_trans to N - 1;
5) At this point anyone calling inode_logged() gets 0 (inode not logged)
since ->logged_trans is greater than 0 and less than N, but our inode
was really logged. As a consequence operations like rename, unlink and
link that happen afterwards in the current transaction end up not
updating the log when they should.
Fix this by ensuring inode_logged() only updates ->logged_trans in case
the inode item is not found in the log tree if after tacking the inode's
lock (spinlock struct btrfs_inode::lock) the ->logged_trans value is still
zero, since the inode lock is what protects setting ->logged_trans at
btrfs_log_inode().
Fixes: 0f8ce49821de ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of incrementing the inode's link count and refcount early before
adding the link, updating the inode and deleting orphan item, do it after
all those steps succeeded right before calling d_instantiate(). This makes
the error handling logic simpler by avoiding the need for the 'drop_inode'
variable to signal if we need to undo the link count increment and the
inode refcount increase under the 'fail' label.
This also reduces the level of indentation by one, making the code easier
to read.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
