| Age | Commit message (Collapse) | Author |
|
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251016083843.76675-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Drivers might need to update DRM connector in the
drm_bridge_funcs.hpd_notify callback (e.g. it might be necessary to
update EDID before setting ELD). Add corresponding argument to the
callback.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250803-lt9611uxc-hdmi-v1-1-cb9ce1793acf@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a906c ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad31952476fb925c401897fc171cd37f536b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Support destination migration over interconnect when migrating from
device-private pages with the same dev_pagemap owner.
Since we now also collect device-private pages to migrate,
also abort migration if the range to migrate is already
fully populated with pages from the desired pagemap.
Finally return -EBUSY from drm_pagemap_populate_mm()
if the migration can't be completed without first migrating all
pages in the range to system. It is expected that the caller
will perform that before retrying the call to
drm_pagemap_populate_mm().
v3:
- Fix a bug where the p2p dma-address was never used.
- Postpone enabling destination interconnect migration,
since xe devices require source interconnect migration to
ensure the source L2 cache is flushed at migration time.
- Update the drm_pagemap_migrate_to_devmem() interface to
pass migration details.
v4:
- Define XE_INTERCONNECT_P2P unconditionally (CI)
- Include a missing header (CI)
v5:
- Use page order increments where possible (Matt Brost).
- Fix a negated value of can_migrate_same_pagemap.
- Move removal of some dead code to a separate patch (Matt Brost).
- Remove an unnecessary zdd get() and put() (Matt Brost).
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-23-thomas.hellstrom@linux.intel.com
|
|
With multi-device we are much more likely to have multiple
drm-gpusvm ranges pointing to the same struct mm range.
To avoid calling into drm_pagemap_populate_mm(), which is always
very costly, introduce a much less costly drm_gpusvm function,
drm_gpusvm_scan_mm() to scan the current migration state.
The device fault-handler and prefetcher can use this function to
determine whether migration is really necessary.
There are a couple of performance improvements that can be done
for this function if it turns out to be too costly. Those are
documented in the code.
v3:
- New patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-21-thomas.hellstrom@linux.intel.com
|
|
Use the dev_pagemap->owner field wherever possible, simplifying
the code slightly.
v3: New patch
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-20-thomas.hellstrom@linux.intel.com
|
|
interconnected gpus
The hmm_range_fault() and the migration helpers currently need a common
"owner" to identify pagemaps and clients with fast interconnect.
Add a drm_pagemap utility to setup such owners by registering
drm_pagemaps, in a registry, and for each new drm_pagemap,
query which existing drm_pagemaps have fast interconnects with the new
drm_pagemap.
The "owner" scheme is limited in that it is static at drm_pagemap creation.
Ideally one would want the owner to be adjusted at run-time, but that
requires changes to hmm. If the proposed scheme becomes too limited,
we need to revisit.
v2:
- Improve documentation of DRM_PAGEMAP_OWNER_LIST_DEFINE(). (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-11-thomas.hellstrom@linux.intel.com
|
|
Pagemaps are costly to set up and tear down, and they consume a lot
of system memory for the struct pages. Ideally they should be
created only when needed.
Add a caching mechanism to allow doing just that: Create the drm_pagemaps
when needed for migration. Keep them around to avoid destruction and
re-creation latencies and destroy inactive/unused drm_pagemaps on memory
pressure using a shrinker.
Only add the helper functions. They will be hooked up to the xe driver
in the upcoming patch.
v2:
- Add lockdep checking for drm_pagemap_put(). (Matt Brost)
- Add a copyright notice. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-8-thomas.hellstrom@linux.intel.com
|
|
If a device holds a reference on a foregin device's drm_pagemap,
and a device unbind is executed on the foreign device,
Typically that foreign device would evict its device-private
pages and then continue its device-managed cleanup eventually
releasing its drm device and possibly allow for module unload.
However, since we're still holding a reference on a drm_pagemap,
when that reference is released and the provider module is
unloaded we'd execute out of undefined memory.
Therefore keep a reference on the provider device and module until
the last drm_pagemap reference is gone.
Note that in theory, the drm_gpusvm_helper module may be unloaded
as soon as the final module_put() of the provider driver module is
executed, so we need to add a module_exit() function that waits
for the work item executing the module_put() has completed.
v2:
- Better commit message (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-7-thomas.hellstrom@linux.intel.com
|
|
With the end goal of being able to free unused pagemaps
and allocate them on demand, add a refcount to struct drm_pagemap,
remove the xe embedded drm_pagemap, allocating and freeing it
explicitly.
v2:
- Make the drm_pagemap pointer in drm_gpusvm_pages reference-counted.
v3:
- Call drm_pagemap_get() before drm_pagemap_put() in drm_gpusvm_pages
(Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-5-thomas.hellstrom@linux.intel.com
|
|
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a906c ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
|
|
functions
There is no real reason to include drm_colorop.h from drm_atomic.h, as
drm_atomic_get_{old,new}_colorop_state() have no real reason to be
static inline.
Convert the static inlines to proper functions, and drop the include to
reduce the include dependencies and improve data hiding.
v2: Fix vkms build failures (Alex)
Fixes: cfc27680ee20 ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20251219114939.1069851-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The initial plane parent interface ->alloc_obj hook no longer needs the
crtc for anything. Pass struct drm_device instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7a40381be6d98dc0916a5447be5dd6cba86cfd0a.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
->setup
The initial plane parent interface ->setup hook no longer needs the crtc
for anything. Pass the struct drm_plane_state instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c3db101ef5fd13c56cb3a9329adecf521a807abc.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move intel_reuse_initial_plane_obj() into common display code, and split
the ->find_obj hook into ->alloc_obj and ->setup hooks.
Return the struct drm_gem_object from ->alloc_obj in preparation for
moving more things to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c71011dbb11afaa5c4da30aa2627833374300d63.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915 and xe
Move some easy common parts to display. Initially, the
intel_find_initial_plane_obj() error path seems silly, but it'll be more
helpful this way for later changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/950d308172443d5bae975aa1ab72111720134219.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the parent interface at one step lower level, allowing
deduplication.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/0cb4077a5a39274c7a2dae95d548d7b33365a518.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add the initial plane handling functions to the display parent
interface. Add the call wrappers in dedicated intel_initial_plane.c
instead of intel_parent.c, as we'll be refactoring the calls heavily.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/ab91c891677fe2bb83bf5aafa5ee984b2442b84d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Acquire and release the GEM object's reservation lock around calls
to the object's purge operation. The tests use
drm_gem_shmem_purge_locked(), which led to errors such as show below.
[ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740
Only export the new helper drm_gem_shmem_purge() for Kunit tests.
This is not an interface for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f7147d ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-6-tzimmermann@suse.de
|
|
Acquire and release the GEM object's reservation lock around calls
to the object's madvide operation. The tests use
drm_gem_shmem_madvise_locked(), which led to errors such as show below.
[ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140
Only export the new helper drm_gem_shmem_madvise() for Kunit tests.
This is not an interface for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f7147d ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-5-tzimmermann@suse.de
|
|
Acquire and release the GEM object's reservation lock around vmap and
vunmap operations. The tests use vmap_locked, which led to errors such
as show below.
[ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0
[ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350
[ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370
[ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330
Only export the new vmap/vunmap helpers for Kunit tests. These are
not interfaces for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f7147d ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-4-tzimmermann@suse.de
|
|
We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
|
|
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
|
|
Fix incorrect parameters in drm_gem_shmem_init() and missing " *" on
empty lines in drm_gem_get_huge_mnt().
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Fixes: 6e0b1b82017b ("drm/gem: Add huge tmpfs mountpoint helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20251216115605.4babbce0@canb.auug.org.au/
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251217172404.31216-1-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
IDR is deprecated and syncobj looks pretty trivial to convert so lets
just do it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251205150910.92913-1-tvrtko.ursulin@igalia.com
|
|
Sort the parent interface struct definitions and members to improve
clarity on where to add new stuff.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7f2e45d030e78928ebc8cf0a6d0fb47a3aa13c48.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are a handful of function pointers that don't really warrant a
dedicated sub-struct for the functionality. Group all of them together
in a single anonymous sub-struct.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/4305b09a93ce2c8ca83bf1fbb3cc7ef5a29d1567.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix some typos in the kernel-doc.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b293e25aa00418908e67576e8adcab325319705a.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let's kickstart the v6.20 (7.0?) release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Stop open coding pending job list in drivers. Add pending job list
iterator which safely walks DRM scheduler list asserting DRM scheduler
is stopped.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20251209200039.1366764-3-matthew.brost@intel.com
|
|
In the past, drivers used to reach into scheduler internals—this must
end because it makes it difficult to change scheduler internals, as
driver-side code must also be updated.
Add helpers to check if the scheduler is stopped and to query a job’s
signaled state to avoid reaching into scheduler internals. These are
expected to be used driver-side in recovery and debug flows.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20251209200039.1366764-2-matthew.brost@intel.com
|
|
Move the panic handling to the display parent interface, making display
more independent of i915 and xe driver implementations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e27eca5424479e8936b786018d0af19a34f839f6.1765474612.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let drivers deal with the vblank wait failures if they so desire. If the
current warning backtrace gets toned down to a simple warning message,
the drivers may wish to add the backtrace themselves.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/7f2de4dd170771991756073f037c7ca043c3e746.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make drm_wait_on_vblank() static. The function is an internal interface
and not invoked directly by drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/b0ab9833a85f5fb6de95ad6cb0216864bf860c9e.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To allow DRM bridges to be removable, add synchronization functions
allowing to tell when a bridge hardware has been physically unplugged and
to mark a critical section that should not be entered after that.
This is inspired by the drm_dev_unplugged/enter/exit() functions for struct
drm_device.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/all/20250106-vigorous-talented-viper-fa49d9@houat/
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251112-drm-bridge-atomic-vs-remove-v3-1-85db717ce094@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31de ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
|
|
drm_gem_get_unmapped_area() relies on mm_get_unmapped_area() which is
only available if CONFIG_MMU=y.
Fixes: 99bda20d6d4c ("drm/gem: Introduce drm_gem_get_unmapped_area() fop")
Cc: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Loïc Molinari <loic.molinari@collabora.com>
Link: https://patch.msgid.link/20251209171151.2449120-1-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Since the stolen memory hooks are function pointers, make some of them
optional instead of having to define them for xe.
insert_node, area_address, and area_size are only needed on platforms
not supported by xe.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/0dbb460e8bd1df29df98862d08fcdfda03912673.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Call the stolen memory interface through the display parent interface.
This makes xe compat gem/i915_gem_stolen.h redundant, and it can be
removed.
v2: Rebase, convert one more call that appeared
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/350c82c49fe40f6319d14d309180e2e2752145ac.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
All the objects that need to implement some callbacks in KMS have a
pointer in there structure to the main drm_device.
However, it's not the case for drm_private_objs, which makes it harder
than it needs to be to implement some of its callbacks. Let's add that
pointer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251014-drm-private-obj-reset-v2-1-6dd60e985e9d@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_gem_object_init_with_mnt() and drm_gem_shmem_create_with_mnt() can
be removed now that the drivers use the new drm_gem_huge_mnt_create()
and drm_gem_get_huge_mnt() helpers.
v5:
- use drm_gem_has_huge_mnt() helper
- compile out shmem_file_setup_with_mnt() call in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() with drm_gem_get_huge_mnt()
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-8-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers
to avoid code duplication in the i915, V3D, Panfrost and Panthor
drivers. The former creates and mounts a dedicated huge tmpfs
mountpoint, for the lifetime of a DRM device, used at GEM object
initialization. The latter retrieves the dedicated huge tmpfs
mountpoint used by a DRM device.
The next commits will port drivers to these helpers.
v3:
- store huge tmpfs mountpoint in drm_device
v4:
- return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- return 0 when huge_mnt already exists
- use new vfs_parse_fs_string() helper
v5:
- remove warning on !dev->huge_mnt and reset to NULL on free
- inline drm_gem_huge_mnt_create() to remove func from text and avoid
calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- compile out drm_device's huge_mnt field in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
- add drm_gem_has_huge_mnt() helper
v6:
- move huge_mnt doc into ifdef'd section
- either inline or export drm_gem_huge_mnt_create()
v7:
- include <drm/drm_device.h> in drm_gem.h
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v11:
- doc fixes
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
mmap() calls on the DRM file pointer currently always end up using
mm_get_unmapped_area() to get a free mapping region. On builds with
CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects
backed by shmem buffers on mountpoints setting the 'huge=' option
because it can't correctly figure out the potentially huge address
alignment required.
This commit introduces the drm_gem_get_unmapped_area() function which
is meant to be used as a get_unmapped_area file operation on the DRM
file pointer to lookup GEM objects based on their fake offsets and get
a properly aligned region by calling shmem_get_unmapped_area() with
the right file pointer. If a GEM object isn't available at the given
offset or if the caller isn't granted access to it, the function falls
back to mm_get_unmapped_area().
This also makes drm_gem_get_unmapped_area() part of the default GEM
file operations so that all the DRM drivers can benefit from more
efficient mappings thanks to the huge page fault handler introduced in
previous commit 'drm/shmem-helper: Add huge page fault handler'.
The shmem_get_unmapped_area() function needs to be exported so that
it can be used from the DRM subsystem.
v3:
- include <linux/sched/mm.h> in drm_gem.c
- forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
v6:
- use GPL variant to export drm_gem_get_unmapped_area()
- don't export shmem_get_unmapped_area() anymore (use f_op instead)
v11:
- rename drm_gem_object_lookup_from_offset() to
drm_gem_object_lookup_at_offset()
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Backmerge to get the topic/drm-intel-plane-color-pipeline branch
contents.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add device specific vfio_pci driver variant for intel graphics (Michal Winiarski)
Driver Changes:
- Add scope-based cleanup helper for runtime PM (Matt Roper)
- Additional xe driver prerequisites and exports (Michal Winiarski)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aS1bNpqeem6PIHrA@fedora
|
|
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Remove the debug_enter/debug_leave helpers, as there are no DRM
drivers supporting debugging with kgdb. Remove code to keep track
of existing fbdev-emulation state. None of this required any longer.
Also remove mode_set_base_atomic from struct drm_crtc_helper_funcs,
which has no callers or implementations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-5-tzimmermann@suse.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
|
|
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 17f22465c5a5573724c942ca7147b4024631ef87)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|