| Age | Commit message (Collapse) | Author |
|---|
|
Rework guest_memfd's prepare() hook into a more accurate make_private(),
and rework its Kconfig from PREPARE to a more generic CONVERT. This will
allow x86 to share (pun intended) a kvm_x86_ops.gmem_make_shared() hook
between the "convert to shared" and "reclaim" flows, which are one and the
same for SNP.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Link: https://patch.msgid.link/20260723210811.72720-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename guest_memfd's invalidate() hook to reclaim() and isolate it via its
own RECLAIM Kconfig, as the hook is called when a folio is freed, which is
far too late and lacks sufficient information for KVM to actually
invalidate its usage of the memory. E.g. SNP uses the hook to convert
memory back to SHARED so that it can be safely accessed by the host, there
is no invalidation of guest mappings anywhere. Isolating the hook will
also allow pKVM on arm64 to opt-in to reclaim() without also having to
differentiate between reclaim and conversions to shared for active VMs.
Keep guest_memfd's trampoline, even though it would be trivial to wire up
.free_folio() directly to an arch callback, to avoid bleeding guest_memfd
internals into arch code (specifically, avoid referencing folios in arch
code).
Leave the kvm_x86_ops hook as-is for the moment, as "reclaim" on SNP is
the same as convert-to-shared, i.e. using a different name for the x86 hook
will allow reusing it for in-place conversion.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://patch.msgid.link/20260723210811.72720-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
.invalidate()
Pass the number of pages to "invalidate", i.e. reclaim, instead of the end
pfn, as a first step towards aligning the function prototypes between the
de facto "to private" and "to shared" arch hooks. Eventually, the goal
is to end up with kvm_gmem_arch_make_{private,shared}(), and in both cases,
providing the number of pages makes the call sites slightly nicer, and also
avoids any confusion over whether the end pfn is inclusive or exclusive.
Opportunistically rename "start" to "pfn", again to align with the expected
signature of make_private() (which needs to pass a starting gfn as well, at
which point the "start" becomes noise).
No functional change intended.
Cc: Fuad Tabba <fuad.tabba@linux.dev>
Cc: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Link: https://patch.msgid.link/20260723210811.72720-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.
Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add a file descriptor based counterpart to chroot(2). This has been
overdue for a long time. It is the natural companion to fchdir() and
avoids re-resolving a path that the caller already holds a file
descriptor to. No TOCTOU between resolving the target and changing the
root. It composes with modern fd-based APIs meaning it works with O_PATH
file descriptors and file descriptors to detached mount trees created
via open_tree(OPEN_TREE_CLONE).
The permission model is identical to chroot(2). The caller must have
CAP_SYS_CHROOT in its user namespace, must pass MAY_EXEC | MAY_CHDIR
permission checks on the target directory, and LSMs are consulted via
the same security_path_chroot() hook.
The system call takes a flags argument for future extensibility which
must currently be zero.
Link: https://patch.msgid.link/20260724-work-failfs-v2-3-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add a new file descriptor sentinel FD_FAILFS_ROOT following
FD_PIDFS_ROOT and FD_NSFS_ROOT and teach fchdir() to accept it. A
process calling fchdir(FD_FAILFS_ROOT) moves its working directory
into failfs. Every AT_FDCWD-relative lookup afterwards fails with
EOPNOTSUPP including "." and ".." and getcwd() reports the working
directory as unreachable from the process root by returning a path
prefixed with "(unreachable)". Lookups relative to explicit directory
file descriptors are unaffected.
The sentinel is the only way in. No privilege or gating is required.
Setting the working directory to a directory in which every operation
fails grants nothing and loses nothing that closing file descriptors
couldn't lose. An unlinked working directory behaves the same way today
modulo errno. The working directory also plays no role in confining ".."
resolution so no boundary is weakened.
Link: https://patch.msgid.link/20260724-work-failfs-v2-2-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
nullfs provides a permanently empty and immutable directory. Lookups
fail with ENOENT. The directory can be opened, read, stat, mounted upon.
It behaves like nothing is there.
Add its counterpart failfs where the semantics are not "there is
nothing here" but "nothing is supported here". Every operation that
reaches the filesystem fails with EOPNOTSUPP. Even statfs()/fstatfs()
fail so the filesystem cannot be discovered through an fd to it.
EOPNOTSUPP rather than a permission errno keeps that coherent. There
is no permission model in which anything could ever be allowed and
EACCES or EPERM would merely suggest that different credentials might
succeed while EIO would suggest corruption. It also makes hitting the
failfs boundary mostly quite dinstinguishable. A task anchoring its
lookups at real directory file descriptors may be able to tell a failfs
refusal from an ordinary permission failure. I wouldn't go so far as
guaranteeing that but it should mostly work.
No path lookup can open the root, not even with O_PATH. It is never
reached by a lookup in a parent directory. The only way to a path-walk
terminal at the root is a jump through a /proc/<pid>/{root,cwd} magic
link or by mountpoint traversal. The root also refuses
->d_weak_revalidate() which the VFS calls for jumped terminals. That
covers the jump-based references too: an O_PATH open is refused,
name_to_handle_at() cannot encode it into a file handle, and following a
magic link into it fails. A plain readlink() of such a link still works
and shows "failfs:/".
There is a single instance of failfs mounted during early boot via
kern_mount() making it logically distinct from every mount namespace.
Since the mount is a member of no mount namespace mounting onto it
fails. So nothing can ever be mounted on top of it. It cannot be cloned
via OPEN_TREE_CLONE and it does not show up in statmount()/listmount()
or /proc/<pid>/mountinfo. The filesystem is not registered so it is
not visible in /proc/filesystems and cannot be mounted from userspace.
This lets tasks shed their filesystem state completely. A process with
its root directory or working directory in failfs must anchor every path
lookup at an explicit file descriptor or is doomed to fail any lookup.
Absolute paths, absolute symlinks, and AT_FDCWD-relative lookups
simply fail. Followup patches will expose it via a new FD_FAILFS_ROOT
file descriptor sentinel understood by fchdir() and the new fchroot()
system call.
Link: https://patch.msgid.link/20260724-work-failfs-v2-1-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Now that everybody has been converted from mmb_fsync() (and it's variant
mmb_fsync_noflush()) to simple_fsync(), we can delete these calls.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260727104923.3828017-40-jack@suse.cz
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Currently, inode and in general metadata writeback is handled in a lazy
manner. When inode is dirty, __writeback_single_inode() calls
.write_inode method which for lots of filesystems just copies inode
metadata into the underlying block buffer. Writeback of other metadata
associated with the inode (as well as buffers underlying inodes) is
usually handled completely separately and implicitely during writeback
of block device inode. This is good for efficiency of WB_SYNC_NONE
writeback or sync(2). However it becomes problematic for situations
where we want to make sure inode and its metadata is really persistent
on disk. fsync(2) is the most pronounced example of this and thus we
have grown a special file operation and various helper functions to
assist with this task. However fsync(2) is not the only case, For
example directories with DIRSYNC flag need similar functionality and
current use of sync_inode_metadata() for this task in filesystems
generally misses writeout of necessary metadata.
Furthermore even fsync(2) handling as implemented by simple_fsync() or
similar helpers is racy and can fail to properly persist the inode. The
problem is that WB_SYNC_NONE writeback can copy inode metadata into
underlying buffer and clean inode dirty bits. Following fsync(2) will
see inode is clean and will fail to make sure underlying buffer is
written out.
When multiple fsync(2) calls race, there's also another type of race
involving mmb_fsync(). There the problem is buffers already submitted to
the disk are no longer tracked in the mmb list and so racing mmb_sync()
can return before all of the IO completes.
Provide a new inode state bit I_METADATA_WRITEBACK tracking whether
writeback of inode related metadata may be needed for successful data
integrity sync and if this bit is set __writeback_single_inode() for
data integrity writeback will call new superblock operation
.sync_inode_metadata whose task is to make sure all metadata associated
with the inode (including the inode itself) is properly persisted. This
will allow filesystems to address the data integrity issues described
above and at the same time somewhat simplify our fsync implementations.
Issues with racing fsync(2) calls will be addressed by synchronization on
I_SYNC inode state which is set while calling .sync_inode_metadata, issues
with missed inode buffer writeback are fixed by filesystems looking up
corresponding buffer head and writing it out if needed.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260727104923.3828017-25-jack@suse.cz
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> says:
the objective of this series is still to prepare making struct
platform_device_id::driver_data an anonymous union. See
https://lore.kernel.org/all/cover.1780048925.git.u.kleine-koenig@baylibre.com/
for the details about that.
Link: https://patch.msgid.link/cover.1784528081.git.u.kleine-koenig@baylibre.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Add AW88399 HDA side codec driver for Lenovo Legion
In order to support AW88399 HDA side codec used on the Lenovo Legion we
need updates to it's ASoC driver.
|
|
We need the char/misc fixes AND this resolves two merge conflicts in:
drivers/android/binder/thread.rs
drivers/misc/nsm.c
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The drm_bridge.h header forward-declares struct edid, whose last usage
in the file was removed in commit 27b8f91c08d9 ("drm/bridge: remove
->get_edid callback"). Commit 11f6c4b1b259 ("drm/bridge: Add
connector-related bridge operations and data") then introduced usage of
struct drm_edid, without a corresponding forward declaration. Fix those
two issues by replacing the struct edid forward declaration with struct
drm_edid.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260703224143.3886069-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
No driver makes use of that parameter, so drop it and don't spend the
effort to determine the matching entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On shutdown the connection manager tears down the router tree without
signalling connected devices. A Thunderbolt 3 device directly connected
to a USB4 host never receives a disconnect indication and during shutdown
this can cause polling the dead link for up to 60 seconds. On some
platforms this behavior leads to a warm reset instead of a shutdown due
to this timeout.
Fix this by asserting PORT_CS_19.DPR on each connected downstream port
before tearing down the router tree. This drives SBTX low (USB4 spec
section 6.9), causing the device to detect SBRX low and transition to
Uninitialized Unplugged state immediately.
Always do this on system shutdown/reboot by forcing host_reset in the
PCI ->shutdown callback. On plain driver unload only do it when the host
router was actually reset on load (host_reset=1), since in that case the
tunnels are not preserved across reload anyway; with host_reset=0 the
tunnels are kept alive across unload/reload so the links are left intact.
Restrict the reset to Thunderbolt 3 devices.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
We need the serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the qp_latency_sensitive_disable capability bit to indicate
that the device no longer implements a separate class for
latency-sensitive QPs, so drivers can stop programming the
latency_sensitive QPC field and skip allocating the dedicated
fast-path bfreg on such HW.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-1-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add NOUVEAU_FIFO_ENGINE_NVDEC to the abi16 uAPI and accept it in
channel allocation, mapping it to the NVDEC engine runlist.
Skip the Turing copy-engine workaround object for NVDEC channels: the
copy engines are not part of the NVDEC runlist, so the workaround
object cannot be instantiated on such channels (and is not needed
there).
This is required for NVK to implement Vulkan Video H.264 decode on top
of the NVDEC engine:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31867
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260725035912.1016464-1-daniel.almeida@collabora.com
|
|
- Use the correct name for a struct in kernel-doc
- Add kernel-doc for missing struct members or correct the name
Warning: ./include/ufs/ufshcd.h:201 Excess struct member 'task_tag'
description in 'ufshcd_lrb'
Warning: ./include/ufs/ufshcd.h:220 expecting prototype for struct
ufs_query_resp. Prototype was for struct ufs_query_res instead
Warning: ./include/ufs/ufshcd.h:577 struct member 'suspend_on_no_request'
not described in 'ufs_clk_scaling'
Warning: ./include/ufs/ufshcd.h:1269 struct member 'nortt' not described
in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 struct member 'trigger_eh_attr' not
described in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 struct member 'timeout_attr' not
described in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 struct member 'lsdb_sup' not
described in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 struct member 'vcc_off_delay_us' not
described in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 Excess struct member 'desc_size'
description in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1269 Excess struct member 'res'
description in 'ufs_hba'
Warning: ./include/ufs/ufshcd.h:1309 struct member 'sq_tail_slot' not
described in 'ufs_hw_queue'
Warning: ./include/ufs/ufshcd.h:1309 Excess struct member 'sq_tp_slot'
description in 'ufs_hw_queue'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260720013759.2979593-1-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Unlike local reenqueues, cap rejections have no repeat limit. A
malfunctioning scheduler can keep re-inserting a task to a cid it lacks caps
on, cycling the task through reject and reenqueue. This was assumed safe
because a task that never runs trips the stall watchdog. However, the
reenqueue irq_work re-arms itself and outranks the timer vector, blocking
everything else on the CPU including stall detection and recovery, until the
NMI hardlockup detector fires.
Local reenqueues already have a repeat cap, SCX_REENQ_LOCAL_MAX_REPEAT,
which needs generalizing to cover all reenqueues. It also has an attribution
problem. Counted per-cpu on root, it tears down the whole hierarchy even
when a sub-scheduler caused the repeated reenqueues.
Generalize by bounding every reenqueue with one per-task counter. reenq_cnt
is bumped in scx_do_enqueue_task() on each SCX_ENQ_REENQ, the single path
every reenqueue producer passes through, and cleared in clr_task_runnable()
when the task is picked to run and in scx_disable_task() when it leaves the
scheduler's control. Past SCX_REENQ_MAX_REPEAT the task's owning scheduler
is ejected with a new SCX_EXIT_ERROR_REENQ and the task is left stranded to
be picked up during sched exit.
The SCX_EV_REENQ_LOCAL_REPEAT event becomes SCX_EV_REENQ_REPEAT, counting
repeat reenqueues from all sources.
v2: Count SCX_EV_REENQ_REPEAT only when a reenqueue leads to another
reenqueue, not on every reenqueue.
v3: - Also clear reenq_cnt in scx_disable_task() so that the count doesn't
carry over to the next owner across sched class switches, scheduler
replacement or sub-scheduler rehoming (Andrea Righi).
- Update the stale SCX_EV_REENQ_LOCAL_REPEAT references in sched-ext.rst
(Andrea Righi).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue
for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock:
the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,
calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI
devices and waits for the host to become runtime-active. But the host
cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the
drain is blocked on that very handler.
However skipping the drain reintroduces a race: hisi_sas returns from
resume before all PHY UP work and libsas discovery work finish. The
controller may then autosuspend while disks are still waking up. The
disks issue IO to a suspended controller, the IO fails, and the disks
get disabled.
Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT
notification to after sas_drain_work(). By then the host resume is about
to complete, so device removal through device_link no longer blocks on
the resume and the cycle is broken.
With the deadlock gone, restore sas_resume_ha() (the draining variant)
in hisi_sas and remove sas_resume_ha_no_sync().
The reorder is safe for the other libsas consumers (isci, pm8001,
aic94xx, mvsas). During suspend, sas_suspend_devices() calls
sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to
NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a
timed-out phy's disk is immediately rejected by the LLDD before reaching
hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),
and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both
complete directly via scsi_done() without entering SCSI EH. This is
identical in both the old and new ordering since lldd_dev_gone runs
during suspend, before resume. The reorder only affects when the
PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()
vs. asynchronous after resume returns), not whether I/O can reach the
device. aic94xx and mvsas do not register any PM ops and never reach
this code path.
Fixes: fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD.
Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn
Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/
Fixes: 34765cbc679c ("iommufd: Associate fault object with iommufd_hw_pgtable")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
RDMA device names are unique only within a network namespace, but an
RDMA cgroup can account resources for devices from multiple namespaces.
Duplicate names therefore make cgroup output ambiguous and can cause
limit writes to select the wrong device.
Use the system-wide RDMA device index to distinguish duplicate names
while preserving the existing UAPI for unique names. Reject ambiguous
name-only writes with -ENOTUNIQ and expose a complete device view to
administrators.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-9-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Accept RDMA_NLDEV_ATTR_DEV_NAME together with RDMA_NLDEV_NET_NS_FD so a
netlink move can rename the device in the destination namespace. Keep the
name semantics aligned with the existing RDMA rename path.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-6-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Immutable branch for battery array helpers to be used by the
USB-C state machine.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add power_supply_get_system_batteries() to allow drivers to obtain
a list of registered battery type power supply references in the
system. Also add power_supply_put_system_batteries() to perform
cleanup after the former function is called.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-batt-status-v5-1-9de4aa900b69@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add support for TI BQ25792 integrated battery charger and buck-boost
converter.
It shares high-level logic of operation with the already supported
BQ25703A, but has a different register map, bit definitions and some of
the lower-level hardware states.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260603-bq25792-v7-7-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files.
Fixes: cab056f2aae7 ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260528174140.1921129-3-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Increment the outgoing FLB refcount in liveupdate_flb_get_outgoing() so
that the FLB structure cannot be freed while the caller is actively
using it. Add an additional liveupdate_flb_put_outgoing() function so
the caller can explicitly indicate when it is done using the outgoing
FLB.
During a Live Update, the kernel may need to fetch the outgoing FLB
outside of the scope of a file handler's preserve() and unpreserve()
callbacks. In that situation there is no way for the caller to protect
itself against the outgoing FLB from being freed while it is using it.
Incrementing the reference count in liveupdate_flb_get_outgoing()
ensures it cannot be freed.
This change also aligns the outgoing FLB lifecycle management with the
incoming FLB, since the latter uses the same get/put semantics.
Fixes: cab056f2aae7 ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260528174140.1921129-2-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Conflicts:
net/core/filter.c
Changes [2] in bpf-next conflict with a recent fix [1]
from the 'net' tree. Resolved by using [1] as a base and
applying same flags handling logic as in [2] in the
bpf_redirect_peer() helper.
[1] https://lore.kernel.org/all/20260706185609.330006-2-daniel@iogearbox.net/
[2] https://lore.kernel.org/all/20260618182035.43811-2-jordan@jrife.io/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As noted by Marco Elver:
rcu_read_lock_trace()
....
t->trc_reader_scp = __srcu_read_lock_fast(&rcu_tasks_trace_srcu_struct);
<interrupt>
rcu_read_unlock_trace()
< ... var decls only ... >
scp = t->trc_reader_scp;
This constitutes a data race between these two accesses to
t->trc_reader_scp. If rcu_read_lock_trace() were to tear its store,
this value would be corrupted.
This commit therefore defers the rcu_read_lock_untrace() function's
load from t->trc_reader_scp until after it has verified that this is
the outermost rcu_read_unlock_trace(). With this change, the interrupt
handler increments and decrements t->trc_reader_nesting and does not
access t->trc_reader_scp, thus avoiding the data race.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Update documentation comments throughout the RCU callback infrastructure
to reflect the transition from a single grace-period sequence number to
the full struct rcu_gp_seq that tracks both normal and expedited grace
periods.
The ->gp_seq[] array documentation in rcu_segcblist.h is updated to
describe dual (normal and expedited) GP tracking. The
rcu_segcblist_advance(), rcu_segcblist_accelerate(), and
rcu_advance_cbs() comments are updated to refer to the struct rcu_gp_seq
state (gsp) instead of the old bare grace-period sequence number (seq).
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path")
Link: https://patch.msgid.link/20260719135609.147823-5-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The temporary Tx descriptor array in an XSK buffer pool is currently
sized from the Tx ring of the socket that creates the pool.
This is insufficient for shared-UMEM Tx. A later socket may have a
larger Tx ring and submit a valid multi-buffer packet containing more
descriptors than the first socket's ring, while still remaining within
the device's xdp_zc_max_segs limit.
A packet-framed batch parser bounded by the temporary array cannot reach
the end-of-packet descriptor in that case. It leaves the packet on the
Tx ring and encounters the same packet on every subsequent attempt,
stalling Tx processing for that socket.
Size the temporary descriptor array to the larger of the first Tx ring
and the device's xdp_zc_max_segs capability. This keeps the array large
enough to inspect one maximum-sized valid packet. Larger shared Tx rings
do not require further resizing, as they can be processed over multiple
batches.
Following commit will actually address the data path side.
Fixes: d5581966040f ("xsk: support ZC Tx multi-buffer in batch API")
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again.
Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path")
Closes: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # wrapped cq addr submission onto routine
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm pull request, small and scattered seems to be the new
normal, the ttm change is probably the largest, with xe being the
most. Alex was out this week so amdgpu is smaller and only has some
urgent fixes.
MAINTAINERS:
- update mailmap address
ttm:
- backup pages using correct order
gpusvm:
- fix mm leak on eviction
- properly zero page array in mm scanning
tests:
- fix dma mask errors in tests
panel:
- fix dependency issues
- ilitek-ili9881c - fix probing
i915:
- Remove DP_EDP_BACKLIGHT_AUX_ENABLE_CAP check for DPCD backlight
xe:
- Skip invalidation for purgeable state updates
- Add drm_dev guards when detaching CCS read / write buffers
- Alloc per domain unique i2c id
- Fix SVM leak on resv obj alloc failure in xe_vm_create
amdgpu:
- Fix a backport mistake for dm_gpureset_toggle_interrupts()
- Fix a failure on flip-done timeouts for mode1 reset
appletbdrm:
- fix issue in damage handling
amdxdna:
- fix command timeout race
imagination:
- fix gpu vm locking
vc4:
- prevent trusted bo from being mapped again
- prevent timer rearm on shutdown
v3d:
- fix NULL deref in unbind
- idle AXI before clock disable on suspend
- use proper GMP access for newer hw
vmwgfx:
- validate shader array size
ethosu:
- fix length calculations
- handle internal chaining buffers
gma500:
- return errors from HDMI i2c reads"
* tag 'drm-fixes-2026-07-25' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/amd/display: Fix missing DCE check in dm_gpureset_toggle_interrupts()
drm/amd/display: Fix flip-done timeouts on mode1 reset
Revert "drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION"
drm/vc4: Shut down BO cache timer before teardown
drm/tests: shmem: Set DMA mask to 64-bit in drm_gem_shmem
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
drm/xe/i2c: Allow per domain unique id
drm/gma500: return errors from Oaktrail HDMI I2C reads
drm/vc4: hvs/v3d: Fix null dereference in unbind
drm/panel: fix unmet dependency bug for DRM_PANEL_HIMAX_HX83121A
drm/panel: s6e3ha8: fix unmet dependency on DRM_DISPLAY_HELPER
drm/panel: ilitek-ili9882t: fix unmet dependency for DRM_PANEL_ILITEK_ILI9882T
drm/panel: ilitek-ili9881c: do not fail probe if iovcc is absent
drm/v3d: Idle AXI transactions before disabling the clock on suspend
drm/v3d: Reach the GMP through the hub registers on V3D 7.x
mailmap: Update Maíra Canal's email address
drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION
drm/pagemap: Clear driver-provided PFNs from migration PFN array
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
accel: ethosu: Handle U85 internal chaining buffer
...
|
|
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock.
Fixes: 2b5dcb31a19a ("bpf, x64: Fix tailcall infinite loop")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260722151909.69142-2-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Various CXL fixes
cxl/features: Clamp Get Feature output size to the remaining buffer
cxl/features: Reject Set Features output buffer smaller than the header
cxl/features: Reject Get Feature count larger than the output buffer
cxl/port: Restart port enumeration when a sibling adds the dport first
cxl/features: Serialize multi-part Get/Set Feature transfers
cxl/pci: Honor -EPROBE_DEFER from component register setup
cxl/mbox: Break poison list loop on an empty payload
cxl/memdev: Fix firmware upload exact-fit handling
cxl/features: bound fwctl command payload to the input buffer
cxl/mce: Make the MCE notifier per-region
cxl/pci: Remove incorrect mbox.valid check in cxl_pci_type3_init_mailbox()
cxl: docs/linux/dax-driver - fix typos
cxl: fix mailbox return code description typo
cxl/mbox: Clamp mailbox output allocation to the payload size
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.3:
UAPI Changes:
cgroup:
- dmem: accept one region per limit
drm:
- send per-connector hotplug events
Core Changes:
buddy:
- tests: test buffer clearence on resume
panel:
- implement ref counting for struct drm_panel throughout the DRM tree
Driver Changes:
etnaviv:
- force flush on power register ops
gma:
- replace simple-kms helpers with regular atomic helpers
- clean up
host1x:
- support Tegra264 plus DT bindings
- fix minor issues throughout driver
hypervdrm:
- clean up PCI-device binding
imagination:
- mark BXM-4-64 MC1 (36.52.104.182) as supported
- clean up
ivpu:
- clean up
nouveau:
- remove redundant call to pm_runtime_mark_last_busy()
panel:
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
panfrost:
- clean up
solomon:
- clean up variables
tve200:
- add OF module alias for autoloading
v3d:
- fix job BO handling
vc4:
- ref i2c-adapter module
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260724082204.GA18774@linux.fritz.box
|
|
Pull fscrypt fixes from Eric Biggers:
"A couple fixes for AI-detected bugs"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
fscrypt: Add missing superblock check in find_or_insert_direct_key()
|
|
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.
Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.
Link: https://lore.kernel.org/all/b3c94552-c104-42e3-be15-7e8362e8039e@gmail.com/
Link: https://lore.kernel.org/all/afJXG4_rtaj3l2Dk@google.com/
Link: https://lore.kernel.org/all/ajQ-CtU131FAJ9ES@google.com/
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remaining cxl/core type2 support
cxl: Support dpa without a mailbox
cxl: Support Type2 cxl regs mapping
|
